[U-Boot-Users] TSEC/PHY @ MPC834x stopped working

[Kim Phillips]

On Wed, 02 Jul 2008 18:01:01 +0200
Andre Schwarz <andre.schwarz at matrix-vision.de> wrote:

> this is a fully configured board, i.e. serial# and ethaddr/eth1addr set
> up correctly.
> 
> I'll give the bisect a try a soon as there'll be some time.
> 
just to clarify, are you using the mainline u-boot.git tree, or
u-boot-mpc83xx.git?  you should be using the latter until I ask WD to
pull.  Actually, if you can confirm it corrects your problem, I have no
reason to delay it further (I was waiting for WD to get back from
vacation).

Kim