[U-Boot-Users] [PATCH] sh: Renesas R0P7785LC0011RL board support

Yoshihiro Shimoda shimoda.yoshihiro at renesas.com
Wed Jul 9 14:07:47 CEST 2008


This board has SH7785, 512MB DDR2-SDRAM, NOR Flash,
Graphic controller, Ethernet, USB, SD, and RTC.

This patch supports the following functions:
 - 128MB DDR2-SDRAM (29-bit address mode only)
 - NOR Flash
 - USB host
 - Ethernet

Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro at renesas.com>
---
 MAINTAINERS                             |    1 +
 MAKEALL                                 |    1 +
 Makefile                                |    5 +
 board/r0p7785lc0011rl/Makefile          |   43 ++++
 board/r0p7785lc0011rl/config.mk         |   26 +++
 board/r0p7785lc0011rl/lowlevel_init.S   |  318 +++++++++++++++++++++++++++
 board/r0p7785lc0011rl/r0p7785lc0011rl.c |   51 +++++
 board/r0p7785lc0011rl/rtl8169.h         |   62 ++++++
 board/r0p7785lc0011rl/rtl8169_mac.c     |  354 +++++++++++++++++++++++++++++++
 board/r0p7785lc0011rl/selfcheck.c       |  196 +++++++++++++++++
 board/r0p7785lc0011rl/u-boot.lds        |   97 +++++++++
 include/configs/r0p7785lc0011rl.h       |  173 +++++++++++++++
 12 files changed, 1327 insertions(+), 0 deletions(-)
 create mode 100644 board/r0p7785lc0011rl/Makefile
 create mode 100644 board/r0p7785lc0011rl/config.mk
 create mode 100644 board/r0p7785lc0011rl/lowlevel_init.S
 create mode 100644 board/r0p7785lc0011rl/r0p7785lc0011rl.c
 create mode 100644 board/r0p7785lc0011rl/rtl8169.h
 create mode 100644 board/r0p7785lc0011rl/rtl8169_mac.c
 create mode 100644 board/r0p7785lc0011rl/selfcheck.c
 create mode 100644 board/r0p7785lc0011rl/u-boot.lds
 create mode 100644 include/configs/r0p7785lc0011rl.h

diff --git a/MAINTAINERS b/MAINTAINERS
index a3d70b1..b6f7002 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -731,6 +731,7 @@ Mark Jonas <mark.jonas at de.bosch.com>
 Yoshihiro Shimoda <shimoda.yoshihiro at renesas.com>

 	MS7720SE		SH7720
+	R0P77850011RL		SH7785

 Yusuke Goda <goda.yusuke at renesas.com>

diff --git a/MAKEALL b/MAKEALL
index 9f80b3d..3cb4353 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -753,6 +753,7 @@ LIST_sh4="		\
 	r7780mp		\
 	r2dplus		\
 	sh7763rdp	\
+	r0p7785lc0011rl	\
 "

 LIST_sh="		\
diff --git a/Makefile b/Makefile
index ac3f98f..2ab08a4 100644
--- a/Makefile
+++ b/Makefile
@@ -2955,6 +2955,11 @@ sh7763rdp_config  :   unconfig
 	@echo "#define CONFIG_SH7763RDP 1" > $(obj)include/config.h
 	@./mkconfig -a $(@:_config=) sh sh4 sh7763rdp

+r0p7785lc0011rl_config  :   unconfig
+	@ >include/config.h
+	@echo "#define CONFIG_R0P7785LC0011RL 1" >> include/config.h
+	@./mkconfig -a $(@:_config=) sh sh4 r0p7785lc0011rl
+
 #========================================================================
 # SPARC
 #========================================================================
diff --git a/board/r0p7785lc0011rl/Makefile b/board/r0p7785lc0011rl/Makefile
new file mode 100644
index 0000000..123a937
--- /dev/null
+++ b/board/r0p7785lc0011rl/Makefile
@@ -0,0 +1,43 @@
+#
+# Copyright (C) 2008
+# Renesas Solutions Corp.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+
+include $(TOPDIR)/config.mk
+
+LIB	= lib$(BOARD).a
+
+COBJS	:= r0p7785lc0011rl.o selfcheck.o rtl8169_mac.o
+SOBJS	:= lowlevel_init.o
+
+$(LIB):	$(COBJS) $(SOBJS)
+	$(AR) crv $@ $(COBJS) $(SOBJS)
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+.depend:	Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+		$(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+-include .depend
+
+#########################################################################
diff --git a/board/r0p7785lc0011rl/config.mk b/board/r0p7785lc0011rl/config.mk
new file mode 100644
index 0000000..93761ee
--- /dev/null
+++ b/board/r0p7785lc0011rl/config.mk
@@ -0,0 +1,26 @@
+#
+# Copyright (C) 2007
+# Nobuhiro Iwamatsu <iwamatsu at nigauri.org>
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+
+#
+# TEXT_BASE refers to image _after_ relocation.
+#
+# NOTE: Must match value used in u-boot.lds (in this directory).
+#
+TEXT_BASE = 0x0ff80000
+
diff --git a/board/r0p7785lc0011rl/lowlevel_init.S b/board/r0p7785lc0011rl/lowlevel_init.S
new file mode 100644
index 0000000..8126296
--- /dev/null
+++ b/board/r0p7785lc0011rl/lowlevel_init.S
@@ -0,0 +1,318 @@
+/*
+ * Copyright (C) 2008 Yoshihiro Shimoda <shimoda.yoshihiro at renesas.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <config.h>
+#include <version.h>
+#include <asm/processor.h>
+
+.macro	write32, addr, data
+	mov.l \addr ,r1
+	mov.l \data ,r0
+	mov.l r0, @r1
+.endm
+
+.macro	write16, addr, data
+	mov.l \addr ,r1
+	mov.l \data ,r0
+	mov.w r0, @r1
+.endm
+
+.macro	write8, addr, data
+	mov.l \addr ,r1
+	mov.l \data ,r0
+	mov.b r0, @r1
+.endm
+
+.macro	wait_timer, time
+	mov.l	\time ,r3
+1:
+	nop
+	tst	r3, r3
+	bf/s	1b
+	dt	r3
+.endm
+
+#include <asm/processor.h>
+
+	.global	lowlevel_init
+
+	.text
+	.align	2
+
+lowlevel_init:
+	wait_timer	WAIT_200US
+	wait_timer	WAIT_200US
+
+	/*------- LBSC -------*/
+	write32 MMSELR_A,	MMSELR_D
+
+	/*------- DBSC2 -------*/
+	write32 DBSC2_DBCONF_A,	DBSC2_DBCONF_D
+	write32 DBSC2_DBTR0_A,	DBSC2_DBTR0_D
+	write32 DBSC2_DBTR1_A,	DBSC2_DBTR1_D
+	write32 DBSC2_DBTR2_A,	DBSC2_DBTR2_D
+	write32 DBSC2_DBFREQ_A,	DBSC2_DBFREQ_D1
+	write32 DBSC2_DBFREQ_A,	DBSC2_DBFREQ_D2
+	wait_timer	WAIT_200US
+
+	write32 DBSC2_DBDICODTOCD_A,	DBSC2_DBDICODTOCD_D
+	write32 DBSC2_DBCMDCNT_A,	DBSC2_DBCMDCNT_D_CKE_H
+	wait_timer	WAIT_200US
+	write32 DBSC2_DBCMDCNT_A,	DBSC2_DBCMDCNT_D_PALL
+	write32 DBSC2_DBMRCNT_A,	DBSC2_DBMRCNT_D_EMRS2
+	write32 DBSC2_DBMRCNT_A,	DBSC2_DBMRCNT_D_EMRS3
+	write32 DBSC2_DBMRCNT_A,	DBSC2_DBMRCNT_D_EMRS1_1
+	write32 DBSC2_DBMRCNT_A,	DBSC2_DBMRCNT_D_MRS_1
+	write32 DBSC2_DBCMDCNT_A,	DBSC2_DBCMDCNT_D_PALL
+	write32 DBSC2_DBCMDCNT_A,	DBSC2_DBCMDCNT_D_REF
+	write32 DBSC2_DBCMDCNT_A,	DBSC2_DBCMDCNT_D_REF
+	write32 DBSC2_DBMRCNT_A,	DBSC2_DBMRCNT_D_MRS_2
+	wait_timer	WAIT_200US
+
+	write32 DBSC2_DBMRCNT_A,	DBSC2_DBMRCNT_D_EMRS1_2
+	write32 DBSC2_DBMRCNT_A,	DBSC2_DBMRCNT_D_EMRS1_1
+
+	write32 DBSC2_DBEN_A,		DBSC2_DBEN_D
+	write32 DBSC2_DBRFCNT1_A,	DBSC2_DBRFCNT1_D
+	write32 DBSC2_DBRFCNT2_A,	DBSC2_DBRFCNT2_D
+	write32 DBSC2_DBRFCNT0_A,	DBSC2_DBRFCNT0_D
+	wait_timer	WAIT_200US
+
+	/*------- GPIO -------*/
+	write16 PACR_A,	PACR_D
+	write16 PBCR_A,	PBCR_D
+	write16 PCCR_A,	PCCR_D
+	write16 PDCR_A,	PDCR_D
+	write16 PECR_A,	PECR_D
+	write16 PFCR_A,	PFCR_D
+	write16 PGCR_A,	PGCR_D
+	write16 PHCR_A,	PHCR_D
+	write16 PJCR_A,	PJCR_D
+	write16 PKCR_A,	PKCR_D
+	write16 PLCR_A,	PLCR_D
+	write16 PMCR_A,	PMCR_D
+	write16 PNCR_A,	PNCR_D
+	write16 PPCR_A,	PPCR_D
+	write16 PQCR_A,	PQCR_D
+	write16 PRCR_A,	PRCR_D
+
+	write8	PEPUPR_A,	PEPUPR_D
+	write8	PHPUPR_A,	PHPUPR_D
+	write8	PJPUPR_A,	PJPUPR_D
+	write8	PKPUPR_A,	PKPUPR_D
+	write8	PLPUPR_A,	PLPUPR_D
+	write8	PMPUPR_A,	PMPUPR_D
+	write8	PNPUPR_A,	PNPUPR_D
+	write16	PPUPR1_A,	PPUPR1_D
+	write16	PPUPR2_A,	PPUPR2_D
+	write16	P1MSELR_A,	P1MSELR_D
+	write16	P2MSELR_A,	P2MSELR_D
+
+	/*------- LBSC -------*/
+	write32	BCR_A,		BCR_D
+	write32	CS0BCR_A,	CS0BCR_D
+	write32	CS0WCR_A,	CS0WCR_D
+	write32	CS1BCR_A,	CS1BCR_D
+	write32	CS1WCR_A,	CS1WCR_D
+	write32	CS4BCR_A,	CS4BCR_D
+	write32	CS4WCR_A,	CS4WCR_D
+
+	mov.l	PASCR_A, r0
+	mov.l	@r0, r2
+	mov.l	PASCR_32BIT_MODE, r1
+	tst	r1, r2
+	bt	lbsc_29bit
+
+	write32	CS2BCR_A,	CS_USB_BCR_D
+	write32	CS2WCR_A,	CS_USB_WCR_D
+	write32	CS3BCR_A,	CS_SD_BCR_D
+	write32	CS3WCR_A,	CS_SD_WCR_D
+	write32	CS5BCR_A,	CS_I2C_BCR_D
+	write32	CS5WCR_A,	CS_I2C_WCR_D
+	write32	CS6BCR_A,	CS0BCR_D
+	write32	CS6WCR_A,	CS0WCR_D
+	bra	lbsc_end
+	 nop
+
+lbsc_29bit:
+	write32	CS5BCR_A,	CS_USB_BCR_D
+	write32	CS5WCR_A,	CS_USB_WCR_D
+	write32	CS6BCR_A,	CS_SD_BCR_D
+	write32	CS6WCR_A,	CS_SD_WCR_D
+
+lbsc_end:
+
+	write32	CCR_A,	CCR_D
+
+	rts
+	nop
+
+	.align 4
+
+/*------- LBSC -------*/
+MMSELR_A:	.long	0xfc400020
+MMSELR_D:	.long	0xa5a50002
+
+/*------- DBSC2 -------*/
+#define DBSC2_BASE	0xfe800000
+DBSC2_DBSTATE_A:	.long	DBSC2_BASE + 0x0c
+DBSC2_DBEN_A:		.long	DBSC2_BASE + 0x10
+DBSC2_DBCMDCNT_A:	.long	DBSC2_BASE + 0x14
+DBSC2_DBCONF_A:		.long	DBSC2_BASE + 0x20
+DBSC2_DBTR0_A:		.long	DBSC2_BASE + 0x30
+DBSC2_DBTR1_A:		.long	DBSC2_BASE + 0x34
+DBSC2_DBTR2_A:		.long	DBSC2_BASE + 0x38
+DBSC2_DBRFCNT0_A:	.long	DBSC2_BASE + 0x40
+DBSC2_DBRFCNT1_A:	.long	DBSC2_BASE + 0x44
+DBSC2_DBRFCNT2_A:	.long	DBSC2_BASE + 0x48
+DBSC2_DBRFSTS_A:	.long	DBSC2_BASE + 0x4c
+DBSC2_DBFREQ_A:		.long	DBSC2_BASE + 0x50
+DBSC2_DBDICODTOCD_A:	.long	DBSC2_BASE + 0x54
+DBSC2_DBMRCNT_A:	.long	DBSC2_BASE + 0x60
+DDR_DUMMY_ACCESS_A:	.long	0x40000000
+
+DBSC2_DBCONF_D:		.long	0x00630002
+DBSC2_DBTR0_D:		.long	0x050b1f04
+DBSC2_DBTR1_D:		.long	0x00040204
+DBSC2_DBTR2_D:		.long	0x02100308
+DBSC2_DBFREQ_D1:	.long	0x00000000
+DBSC2_DBFREQ_D2:	.long	0x00000100
+DBSC2_DBDICODTOCD_D:	.long	0x000f0907
+
+DBSC2_DBCMDCNT_D_CKE_H:	.long	0x00000003
+DBSC2_DBCMDCNT_D_PALL:	.long	0x00000002
+DBSC2_DBCMDCNT_D_REF:	.long	0x00000004
+
+DBSC2_DBMRCNT_D_EMRS2:	.long	0x00020000
+DBSC2_DBMRCNT_D_EMRS3:	.long	0x00030000
+DBSC2_DBMRCNT_D_EMRS1_1:	.long	0x00010006
+DBSC2_DBMRCNT_D_EMRS1_2:	.long	0x00010386
+DBSC2_DBMRCNT_D_MRS_1:	.long	0x00000952
+DBSC2_DBMRCNT_D_MRS_2:	.long	0x00000852
+
+DBSC2_DBEN_D:		.long	0x00000001
+
+DBSC2_DBPDCNT0_D3:	.long	0x00000080
+DBSC2_DBRFCNT1_D:	.long	0x00000926
+DBSC2_DBRFCNT2_D:	.long	0x00fe00fe
+DBSC2_DBRFCNT0_D:	.long	0x00010000
+
+WAIT_200US:	.long	33333
+
+/*------- GPIO -------*/
+#define GPIO_BASE	0xffe70000
+PACR_A:		.long	GPIO_BASE + 0x00
+PBCR_A:		.long	GPIO_BASE + 0x02
+PCCR_A:		.long	GPIO_BASE + 0x04
+PDCR_A:		.long	GPIO_BASE + 0x06
+PECR_A:		.long	GPIO_BASE + 0x08
+PFCR_A:		.long	GPIO_BASE + 0x0a
+PGCR_A:		.long	GPIO_BASE + 0x0c
+PHCR_A:		.long	GPIO_BASE + 0x0e
+PJCR_A:		.long	GPIO_BASE + 0x10
+PKCR_A:		.long	GPIO_BASE + 0x12
+PLCR_A:		.long	GPIO_BASE + 0x14
+PMCR_A:		.long	GPIO_BASE + 0x16
+PNCR_A:		.long	GPIO_BASE + 0x18
+PPCR_A:		.long	GPIO_BASE + 0x1a
+PQCR_A:		.long	GPIO_BASE + 0x1c
+PRCR_A:		.long	GPIO_BASE + 0x1e
+PEPUPR_A:	.long	GPIO_BASE + 0x48
+PHPUPR_A:	.long	GPIO_BASE + 0x4e
+PJPUPR_A:	.long	GPIO_BASE + 0x50
+PKPUPR_A:	.long	GPIO_BASE + 0x52
+PLPUPR_A:	.long	GPIO_BASE + 0x54
+PMPUPR_A:	.long	GPIO_BASE + 0x56
+PNPUPR_A:	.long	GPIO_BASE + 0x58
+PPUPR1_A:	.long	GPIO_BASE + 0x60
+PPUPR2_A:	.long	GPIO_BASE + 0x62
+P1MSELR_A:	.long	GPIO_BASE + 0x80
+P2MSELR_A:	.long	GPIO_BASE + 0x82
+
+PACR_D:		.long	0x0000
+PBCR_D:		.long	0x0000
+PCCR_D:		.long	0x0000
+PDCR_D:		.long	0x0000
+PECR_D:		.long	0x0000
+PFCR_D:		.long	0x0000
+PGCR_D:		.long	0x0000
+PHCR_D:		.long	0x00c0
+PJCR_D:		.long	0xc3fc
+PKCR_D:		.long	0x03ff
+PLCR_D:		.long	0x0000
+PMCR_D:		.long	0xffff
+PNCR_D:		.long	0xf0c3
+PPCR_D:		.long	0x0000
+PQCR_D:		.long	0x0000
+PRCR_D:		.long	0x0000
+
+PEPUPR_D:	.long	0xff
+PHPUPR_D:	.long	0x00
+PJPUPR_D:	.long	0x00
+PKPUPR_D:	.long	0x00
+PLPUPR_D:	.long	0x00
+PMPUPR_D:	.long	0xfc
+PNPUPR_D:	.long	0x00
+PPUPR1_D:	.long	0xffbf
+PPUPR2_D:	.long	0xff00
+P1MSELR_D:	.long	0x3780
+P2MSELR_D:	.long	0x0000
+
+/*------- LBSC -------*/
+PASCR_A:		.long	0xff000070
+PASCR_32BIT_MODE:	.long	0x80000000	/* check booting mode */
+
+BCR_A:		.long	BCR
+CS0BCR_A:	.long	CS0BCR
+CS0WCR_A:	.long	CS0WCR
+CS1BCR_A:	.long	CS1BCR
+CS1WCR_A:	.long	CS1WCR
+CS2BCR_A:	.long	CS2BCR
+CS2WCR_A:	.long	CS2WCR
+CS3BCR_A:	.long	CS3BCR
+CS3WCR_A:	.long	CS3WCR
+CS4BCR_A:	.long	CS4BCR
+CS4WCR_A:	.long	CS4WCR
+CS5BCR_A:	.long	CS5BCR
+CS5WCR_A:	.long	CS5WCR
+CS6BCR_A:	.long	CS6BCR
+CS6WCR_A:	.long	CS6WCR
+
+BCR_D:		.long	0x80000003
+CS0BCR_D:	.long	0x22222340
+CS0WCR_D:	.long	0x00111118
+CS1BCR_D:	.long	0x11111100
+CS1WCR_D:	.long	0x33333303
+CS4BCR_D:	.long	0x11111300
+CS4WCR_D:	.long	0x00101012
+
+/* USB setting : 32bit mode = CS2, 29bit mode = CS5 */
+CS_USB_BCR_D:	.long	0x11111200
+CS_USB_WCR_D:	.long	0x00020004
+
+/* SD setting  : 32bit mode = CS3, 29bit mode = CS6 */
+CS_SD_BCR_D:	.long	0x00000300
+CS_SD_WCR_D:	.long	0x00030108
+
+/* I2C setting : 32bit mode = CS5, 29bit mode = CS1(already setting) */
+CS_I2C_BCR_D:	.long	0x11111100
+CS_I2C_WCR_D:	.long	0x00000003
+
+CCR_A:		.long	0xff00001c
+CCR_D:		.long	0x0000090b
+
diff --git a/board/r0p7785lc0011rl/r0p7785lc0011rl.c b/board/r0p7785lc0011rl/r0p7785lc0011rl.c
new file mode 100644
index 0000000..5b9c403
--- /dev/null
+++ b/board/r0p7785lc0011rl/r0p7785lc0011rl.c
@@ -0,0 +1,51 @@
+/*
+ * Copyright (C) 2008 Yoshihiro Shimoda <shimoda.yoshihiro at renesas.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/processor.h>
+#include <asm/pci.h>
+
+int checkboard(void)
+{
+	puts("BOARD: Renesas Technology Corp. R0P7785LC0011RL\n");
+	return 0;
+}
+
+int board_init(void)
+{
+	return 0;
+}
+
+int dram_init(void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	gd->bd->bi_memstart = CFG_SDRAM_BASE;
+	gd->bd->bi_memsize = CFG_SDRAM_SIZE;
+	printf("DRAM:  %dMB\n", CFG_SDRAM_SIZE / (1024 * 1024));
+	return 0;
+}
+
+static struct pci_controller hose;
+void pci_init_board(void)
+{
+	pci_sh7780_init(&hose);
+}
+
diff --git a/board/r0p7785lc0011rl/rtl8169.h b/board/r0p7785lc0011rl/rtl8169.h
new file mode 100644
index 0000000..3d44153
--- /dev/null
+++ b/board/r0p7785lc0011rl/rtl8169.h
@@ -0,0 +1,62 @@
+/*
+ * Copyright (C) 2008 Yoshihiro Shimoda <shimoda.yoshihiro at renesas.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#define PCIREG_8(_adr)	(*(volatile unsigned char *)(_adr))
+#define PCIREG_32(_adr)	(*(volatile unsigned long *)(_adr))
+#define PCI_PAR		PCIREG_32(0xfe0401c0)
+#define PCI_PDR		PCIREG_32(0xfe040220)
+#define PCI_CR		PCIREG_32(0xfe040100)
+#define PCI_CONF1	PCIREG_32(0xfe040004)
+
+#define EEPROM_ADD      0x00000050
+#define HIGH		1
+#define LOW		0
+
+#define PCI_PROG	0x80
+
+#define PCI_EEP_ADDRESS		(unsigned short)0x0007
+#define PCI_MAC_ADDRESS_SIZE	3
+
+#define TIME1	100
+#define TIME2	20000
+
+#define BIT_DUMMY	0
+#define MAC_EEP_READ	1
+#define MAC_EEP_WRITE	2
+#define MAC_EEP_ERACE	3
+#define MAC_EEP_EWEN	4
+#define MAC_EEP_EWDS	5
+
+#define DEBUG 0
+
+/* RTL8169 */
+const unsigned short EEPROM_W_Data_8169_A[] = {
+	0x8129, 0x10ec, 0x8169, 0x1154, 0x032b,
+	0x4020, 0xa101
+};
+const unsigned short EEPROM_W_Data_8169_B[] = {
+	0x4d15, 0xf7c2, 0x8000, 0x0000, 0x0000, 0x1300,
+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x2000,
+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000
+};
+
diff --git a/board/r0p7785lc0011rl/rtl8169_mac.c b/board/r0p7785lc0011rl/rtl8169_mac.c
new file mode 100644
index 0000000..9088cf0
--- /dev/null
+++ b/board/r0p7785lc0011rl/rtl8169_mac.c
@@ -0,0 +1,354 @@
+/*
+ * Copyright (C) 2008 Yoshihiro Shimoda <shimoda.yoshihiro at renesas.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include "rtl8169.h"
+
+
+static unsigned int Device;
+static unsigned char *PCI_MEMR;
+
+static void mac_delay(unsigned int cnt)
+{
+	udelay(cnt);
+}
+
+static void mac_pci_setup(void)
+{
+	unsigned long pci_data;
+
+	PCI_PAR = 0x00000010;
+	PCI_PDR = 0x00001000;
+	PCI_PAR = 0x00000004;
+	pci_data = PCI_PDR;
+	PCI_PDR = pci_data | 0x00000007;
+	PCI_PAR = 0x00000010;
+
+	PCI_MEMR = (unsigned char *)((PCI_PDR | 0xFE240050) & 0xFFFFFFF0);
+}
+
+static void EECS(int level)
+{
+	unsigned char data = *PCI_MEMR;
+
+	if (level)
+		*PCI_MEMR = data | 0x08;
+	else
+		*PCI_MEMR = data & 0xf7;
+}
+
+static void EECLK(int level)
+{
+	unsigned char data = *PCI_MEMR;
+
+	if (level)
+		*PCI_MEMR = data | 0x04;
+	else
+		*PCI_MEMR = data & 0xfb;
+}
+
+static void EEDI(int level)
+{
+	unsigned char data = *PCI_MEMR;
+
+	if (level)
+		*PCI_MEMR = data | 0x02;
+	else
+		*PCI_MEMR = data & 0xfd;
+}
+
+static inline void MacBitDtSet(unsigned short bit)
+{
+	if (bit)
+		EEDI(HIGH);
+	else
+		EEDI(LOW);
+
+	EECLK(LOW);
+	mac_delay(TIME1);
+	EECLK(HIGH);
+	mac_delay(TIME1);
+	EEDI(LOW);
+}
+
+static inline unsigned char MacBitDtGet(void)
+{
+	unsigned char bit;
+
+	EECLK(LOW);
+	mac_delay(TIME1);
+	bit = *PCI_MEMR & 0x01;
+	EECLK(HIGH);
+	mac_delay(TIME1);
+
+	return bit;
+}
+
+static inline void MacEpSetCmd(unsigned char command)
+{
+	MacBitDtSet(BIT_DUMMY);
+	switch (command) {
+	case MAC_EEP_READ:
+		MacBitDtSet(1);
+		MacBitDtSet(1);
+		MacBitDtSet(0);
+		break;
+	case MAC_EEP_WRITE:
+		MacBitDtSet(1);
+		MacBitDtSet(0);
+		MacBitDtSet(1);
+		break;
+	case MAC_EEP_ERACE:
+		MacBitDtSet(1);
+		MacBitDtSet(1);
+		MacBitDtSet(1);
+		break;
+	case MAC_EEP_EWEN:
+		MacBitDtSet(1);
+		MacBitDtSet(0);
+		MacBitDtSet(0);
+		break;
+	case MAC_EEP_EWDS:
+		MacBitDtSet(1);
+		MacBitDtSet(0);
+		MacBitDtSet(0);
+		break;
+	default:
+		break;
+	}
+}
+
+static inline unsigned short MacEpGetDt(void)
+{
+	unsigned short data = 0;
+	int i;
+
+	MacBitDtGet();			/* DUMMY */
+	for (i = 0 ; i < 16 ; i++) {
+		data <<= 1;
+		data |= MacBitDtGet();
+	}
+	return data;
+}
+
+static inline void MacEpSetAdd(unsigned short address)
+{
+	MacBitDtSet(address & 0x0020);    /* A5 */
+	MacBitDtSet(address & 0x0010);    /* A4 */
+	MacBitDtSet(address & 0x0008);    /* A3 */
+	MacBitDtSet(address & 0x0004);    /* A2 */
+	MacBitDtSet(address & 0x0002);    /* A1 */
+	MacBitDtSet(address & 0x0001);    /* A0 */
+}
+
+static inline void MacEepSetData(unsigned short data)
+{
+	MacBitDtSet(data & 0x8000);
+	MacBitDtSet(data & 0x4000);
+	MacBitDtSet(data & 0x2000);
+	MacBitDtSet(data & 0x1000);
+	MacBitDtSet(data & 0x0800);
+	MacBitDtSet(data & 0x0400);
+	MacBitDtSet(data & 0x0200);
+	MacBitDtSet(data & 0x0100);
+	MacBitDtSet(data & 0x0080);
+	MacBitDtSet(data & 0x0040);
+	MacBitDtSet(data & 0x0020);
+	MacBitDtSet(data & 0x0010);
+	MacBitDtSet(data & 0x0008);
+	MacBitDtSet(data & 0x0004);
+	MacBitDtSet(data & 0x0002);
+	MacBitDtSet(data & 0x0001);
+}
+
+static void MacDataWrite(const unsigned short *data, unsigned short address,
+			 unsigned int count)
+{
+	unsigned int i;
+
+	for (i = 0; i < count; i++) {
+		EECS(HIGH);
+		EEDI(LOW);
+		mac_delay(TIME1);
+
+		MacEpSetCmd(MAC_EEP_WRITE);
+		MacEpSetAdd(address++);
+		MacEepSetData(*(data + i));
+
+		EECLK(LOW);
+		EEDI(LOW);
+		EECS(LOW);
+		mac_delay(TIME2);
+	}
+}
+
+static void MacAddressErace(void)
+{
+	unsigned int i;
+	unsigned short pci_address = 7;
+
+	for (i = 0; i < 3; i++) {
+		EECS(HIGH);
+		EEDI(LOW);
+		mac_delay(TIME1);
+		MacEpSetCmd(MAC_EEP_ERACE);
+		MacEpSetAdd(pci_address++);
+		mac_delay(TIME1);
+		EECLK(LOW);
+		EEDI(LOW);
+		EECS(LOW);
+	}
+
+	mac_delay(TIME2);
+
+	printf("\n\nErace End\n");
+	for (i = 0; i < 10; i++)
+		mac_delay(TIME2);
+}
+
+static void MacAddressWrite(unsigned short *data)
+{
+	MacAddressErace();
+
+	MacDataWrite(EEPROM_W_Data_8169_A, 0x0000, 7);
+	MacDataWrite(data, PCI_EEP_ADDRESS, PCI_MAC_ADDRESS_SIZE);
+	MacDataWrite(EEPROM_W_Data_8169_B, 0x000a, 54);
+}
+
+void MacDtRd(unsigned char *buf, unsigned short address, unsigned int count)
+{
+	unsigned int i;
+	unsigned short wk;
+
+	for (i = 0 ; i < count; i++) {
+		EECS(HIGH);
+		EEDI(LOW);
+		mac_delay(TIME1);
+		MacEpSetCmd(MAC_EEP_READ);
+		MacEpSetAdd(address++);
+		wk = MacEpGetDt();
+
+		*buf++ = (unsigned char)(wk & 0xff);
+		*buf++ = (unsigned char)((wk >> 8) & 0xff);
+		EECLK(LOW);
+		EEDI(LOW);
+		EECS(LOW);
+	}
+}
+
+static void MacAdRd(unsigned char *buf)
+{
+	*PCI_MEMR = PCI_PROG;
+
+	MacDtRd(buf, PCI_EEP_ADDRESS, PCI_MAC_ADDRESS_SIZE);
+}
+
+static void MacEepEWEN(void)
+{
+	*PCI_MEMR = PCI_PROG;
+	mac_delay(TIME1);
+	EECS(LOW);
+	EECLK(LOW);
+	EEDI(LOW);
+	EECS(HIGH);
+	mac_delay(TIME1);
+
+	MacEpSetCmd(MAC_EEP_EWEN);
+	MacBitDtSet(1);
+	MacBitDtSet(1);
+	MacBitDtSet(BIT_DUMMY);
+	MacBitDtSet(BIT_DUMMY);
+	MacBitDtSet(BIT_DUMMY);
+	MacBitDtSet(BIT_DUMMY);
+
+	EECLK(LOW);
+	EEDI(LOW);
+	EECS(LOW);
+	mac_delay(TIME1);
+}
+
+void mac_write(unsigned short *data)
+{
+	mac_pci_setup();
+	MacEepEWEN();
+	MacAddressWrite(data);
+}
+
+void mac_read(void)
+{
+	unsigned char data[6];
+
+	mac_pci_setup();
+	MacAdRd(data);
+	printf("\n\nGet Mac = %02x:%02x:%02x:%02x:%02x:%02x\n",
+		data[0], data[1], data[2], data[3], data[4], data[5]);
+}
+
+int do_set_mac(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	int i;
+	unsigned char mac[6];
+	char *s, *e;
+
+	if (argc != 2) {
+		printf("Usage:\n%s\n", cmdtp->usage);
+		return 1;
+	}
+
+	s = argv[1];
+
+	for (i = 0; i < 6; i++) {
+		mac[i] = s ? simple_strtoul(s, &e, 16) : 0;
+		if (s)
+			s = (*e) ? e + 1 : e;
+	}
+	mac_write(mac);
+
+	return 0;
+}
+
+U_BOOT_CMD(
+	setmac,	2,	1,	do_set_mac,
+	"setmac - write MAC address for RTL8110SCL\n",
+	"\n"
+	"setmac <mac address> - write MAC address for RTL8110SCL\n"
+);
+
+int do_print_mac(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	int i;
+	uchar mac[6];
+
+	if (argc != 1) {
+		printf("Usage:\n%s\n", cmdtp->usage);
+		return 1;
+	}
+
+	mac_read();
+
+	return 0;
+}
+
+U_BOOT_CMD(
+	printmac,	1,	1,	do_print_mac,
+	"printmac - print MAC address for RTL8110\n",
+	"\n"
+	"    - print MAC address for RTL8110\n"
+);
+
diff --git a/board/r0p7785lc0011rl/selfcheck.c b/board/r0p7785lc0011rl/selfcheck.c
new file mode 100644
index 0000000..90801a4
--- /dev/null
+++ b/board/r0p7785lc0011rl/selfcheck.c
@@ -0,0 +1,196 @@
+/*
+ * Copyright (C) 2008 Yoshihiro Shimoda <shimoda.yoshihiro at renesas.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/processor.h>
+#include <asm/pci.h>
+
+#if defined(CONFIG_CPU_32BIT)
+#define NOCACHE_OFFSET		0x00000000
+#else
+#define NOCACHE_OFFSET		0xa0000000
+#endif
+#define PLD_LEDCR		(0x04000008 + NOCACHE_OFFSET)
+#define PLD_SWSR		(0x0400000a + NOCACHE_OFFSET)
+#define PLD_VERSR		(0x0400000c + NOCACHE_OFFSET)
+
+#define SM107_DEVICEID		(0x13e00060 + NOCACHE_OFFSET)
+
+static void wait_ms(unsigned long time)
+{
+	while (time--)
+		udelay(1000);
+}
+
+static void test_pld(void)
+{
+	printf("PLD version = %04x\n", readb(PLD_VERSR));
+}
+
+static void test_sm107(void)
+{
+	printf("SM107 device ID = %04x\n", readl(SM107_DEVICEID));
+}
+
+static void test_led(void)
+{
+	printf("LED 3, 5, 7, 9 is ON\n");
+	writeb(0x55, PLD_LEDCR);
+	wait_ms(2000);
+	printf("LED 4, 6, 8, 10 is ON\n");
+	writeb(0xaa, PLD_LEDCR);
+	wait_ms(2000);
+	writeb(0x00, PLD_LEDCR);
+}
+
+static void test_dipsw(void)
+{
+	printf("Please DIPSW set = B'0101\n");
+	while (readb(PLD_SWSR) != 0x05) {
+		if (ctrlc())
+			return;
+	}
+	printf("Please DIPSW set = B'1010\n");
+	while (readb(PLD_SWSR) != 0x0A) {
+		if (ctrlc())
+			return;
+	}
+	printf("DIPSW OK\n");
+}
+
+static void test_net(void)
+{
+	unsigned long data;
+
+	writel(0x80000000, 0xfe0401c0);
+	data = readl(0xfe040220);
+	if (data == 0x816910ec)
+		printf("Ethernet OK\n");
+	else
+		printf("Ethernet NG, data = %08x\n", data);
+}
+
+static void test_sata(void)
+{
+	unsigned long data;
+
+	writel(0x80000800, 0xfe0401c0);
+	data = readl(0xfe040220);
+	if (data == 0x35121095)
+		printf("SATA OK\n");
+	else
+		printf("SATA NG, data = %08x\n", data);
+}
+
+static void test_usb(void)
+{
+	printf("USB test is no implement yet...\n");
+}
+
+static void test_i2c(void)
+{
+	printf("I2C test is no implement yet...\n");
+}
+
+static void test_pci(void)
+{
+	unsigned long data;
+
+	writel(0x80001800, 0xfe0401c0);
+	printf("PCI CN1 ID = %08x\n", readl(0xfe040220));
+
+	writel(0x80001000, 0xfe0401c0);
+	printf("PCI CN2 ID = %08x\n", readl(0xfe040220));
+}
+
+int do_hw_test(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	int i;
+	char *cmd;
+
+	if (argc != 2) {
+		printf("Usage:\n%s\n", cmdtp->usage);
+		return 1;
+	}
+
+	cmd = argv[1];
+	switch (cmd[0]) {
+	case 'a':	/* all */
+		test_pld();
+		test_led();
+		test_dipsw();
+		test_sm107();
+		test_usb();
+		test_i2c();
+		test_net();
+		test_sata();
+		test_pci();
+		break;
+	case 'p':	/* pld or pci */
+		if (cmd[1] == 'l')
+			test_pld();
+		else
+			test_pci();
+		break;
+	case 'l':	/* led */
+		test_led();
+		break;
+	case 'd':	/* dipsw */
+		test_dipsw();
+		break;
+	case 's':	/* sm107 or sata */
+		if (cmd[1] == 'm')
+			test_sm107();
+		else
+			test_sata();
+		break;
+	case 'u':	/* usb */
+		test_usb();
+		break;
+	case 'i':	/* i2c */
+		test_i2c();
+		break;
+	case 'n':	/* net */
+		test_net();
+		break;
+	default:
+		printf("Usage:\n%s\n", cmdtp->usage);
+		return 1;
+	}
+
+	return 0;
+}
+
+U_BOOT_CMD(
+	hwtest,	2,	1,	do_hw_test,
+	"hwtest - hardware test for R0P7785LC0011RL board\n",
+	"\n"
+	"hwtest all   - test all hardware\n"
+	"hwtest pld   - output pld version\n"
+	"hwtest led   - test LED\n"
+	"hwtest dipsw - test DIPSW\n"
+	"hwtest sm107 - output SM107 version\n"
+	"hwtest usb   - test R8A66597\n"
+	"hwtest i2c   - output PCA9564 version\n"
+	"hwtest net   - compare RTL8110 ID\n"
+	"hwtest sata  - compare SiI3512 ID\n"
+	"hwtest pci   - output PCI slot device ID\n"
+);
+
diff --git a/board/r0p7785lc0011rl/u-boot.lds b/board/r0p7785lc0011rl/u-boot.lds
new file mode 100644
index 0000000..f0109eb
--- /dev/null
+++ b/board/r0p7785lc0011rl/u-boot.lds
@@ -0,0 +1,97 @@
+/*
+ * Copyrigth (c) 2007
+ * Nobuhiro Iwamatsu <iwamatsu at nigauri.org>
+ * Copyrigth (c) 2008 Yoshihiro Shimoda <shimoda.yoshihiro at renesas.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_FORMAT("elf32-sh-linux", "elf32-sh-linux", "elf32-sh-linux")
+OUTPUT_ARCH(sh)
+ENTRY(_start)
+
+SECTIONS
+{
+	. = 0x08000000 + (128 * 1024 * 1024) - (512 * 1024);
+
+	PROVIDE (reloc_dst = .);
+
+	PROVIDE (_ftext = .);
+	PROVIDE (_fcode = .);
+	PROVIDE (_start = .);
+
+	.text :
+	{
+		cpu/sh4/start.o		(.text)
+		. = ALIGN(8192);
+		common/environment.o	(.ppcenv)
+		. = ALIGN(8192);
+		common/environment.o	(.ppcenvr)
+		. = ALIGN(8192);
+		*(.text)
+		. = ALIGN(4);
+	} =0xFF
+	PROVIDE (_ecode = .);
+	.rodata :
+	{
+		*(.rodata)
+		. = ALIGN(4);
+	}
+	PROVIDE (_etext = .);
+
+
+	PROVIDE (_fdata = .);
+	.data :
+	{
+		*(.data)
+		. = ALIGN(4);
+	}
+	PROVIDE (_edata = .);
+
+	PROVIDE (_fgot = .);
+	.got :
+	{
+		*(.got)
+		. = ALIGN(4);
+	}
+	PROVIDE (_egot = .);
+
+	PROVIDE (__u_boot_cmd_start = .);
+	.u_boot_cmd :
+	{
+		*(.u_boot_cmd)
+		. = ALIGN(4);
+	}
+	PROVIDE (__u_boot_cmd_end = .);
+
+	PROVIDE (reloc_dst_end = .);
+	/* _reloc_dst_end = .; */
+
+	PROVIDE (bss_start = .);
+	PROVIDE (__bss_start = .);
+	.bss :
+	{
+		*(.bss)
+		. = ALIGN(4);
+	}
+	PROVIDE (bss_end = .);
+
+	PROVIDE (_end = .);
+}
+
diff --git a/include/configs/r0p7785lc0011rl.h b/include/configs/r0p7785lc0011rl.h
new file mode 100644
index 0000000..a00692f
--- /dev/null
+++ b/include/configs/r0p7785lc0011rl.h
@@ -0,0 +1,173 @@
+/*
+ * Configuation settings for the Renesas Technology R0P7785LC0011RL board
+ *
+ * Copyright (C) 2008 Yoshihiro Shimoda <shimoda.yoshihiro at renesas.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __R0P7785LC0011RL_H
+#define __R0P7785LC0011RL_H
+
+#undef DEBUG
+#define CONFIG_SH		1
+#define CONFIG_SH4A		1
+#define CONFIG_CPU_SH7785	1
+#define CONFIG_R0P7785LC0011RL	1
+
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_DFL
+#define CONFIG_CMD_SDRAM
+#define CONFIG_CMD_RUN
+#define CONFIG_CMD_ENV
+
+#define CONFIG_CMD_USB
+#define CONFIG_USB_STORAGE
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#define CONFIG_DOS_PARTITION
+#define CONFIG_MAC_PARTITION
+
+#define CONFIG_BAUDRATE		115200
+#define CONFIG_BOOTDELAY	3
+#define CONFIG_BOOTARGS		"console=ttySC1,115200 root=/dev/nfs ip=dhcp"
+#define CONFIG_NETMASK		255.255.255.0
+#define CONFIG_IPADDR		192.168.10.100
+#define CONFIG_SERVERIP		192.168.10.77
+#define CONFIG_GATEWAYIP	192.168.10.77
+
+#define CONFIG_EXTRA_ENV_SETTINGS					\
+	"bootdevice=0:1\0"						\
+	"usbload=usb reset;usbboot;usb stop;bootm\0"
+
+#define CONFIG_VERSION_VARIABLE
+#undef  CONFIG_SHOW_BOOT_PROGRESS
+
+/* MEMORY */
+#define R0P7785LC0011RL_SDRAM_BASE		(0x08000000)
+#define R0P7785LC0011RL_SDRAM_SIZE		(128 * 1024 * 1024)
+#define R0P7785LC0011RL_FLASH_BASE_1		(0xa0000000)
+#define R0P7785LC0011RL_FLASH_BANK_SIZE		(64 * 1024 * 1024)
+#define R0P7785LC0011RL_USB_BASE		(0xb4000000)
+
+#define CFG_LONGHELP
+#define CFG_PROMPT		"=> "
+#define CFG_CBSIZE		256
+#define CFG_PBSIZE		256
+#define CFG_MAXARGS		16
+#define CFG_BARGSIZE		512
+#define CFG_BAUDRATE_TABLE	{ 115200 }
+
+/* SCIF */
+#define CFG_SCIF_CONSOLE	1
+#define CONFIG_CONS_SCIF1	1
+#define CONFIG_SCIF_EXT_CLOCK	1
+#undef  CFG_CONSOLE_INFO_QUIET
+#undef  CFG_CONSOLE_OVERWRITE_ROUTINE
+#undef  CFG_CONSOLE_ENV_OVERWRITE
+
+
+#define CFG_MEMTEST_START	(R0P7785LC0011RL_SDRAM_BASE)
+#define CFG_MEMTEST_END		(CFG_MEMTEST_START + \
+					(R0P7785LC0011RL_SDRAM_SIZE) - \
+					 4 * 1024 * 1024)
+#undef  CFG_ALT_MEMTEST
+#undef  CFG_MEMTEST_SCRATCH
+#undef  CFG_LOADS_BAUD_CHANGE
+
+#define CFG_SDRAM_BASE	(R0P7785LC0011RL_SDRAM_BASE)
+#define CFG_SDRAM_SIZE	(R0P7785LC0011RL_SDRAM_SIZE)
+#define CFG_LOAD_ADDR	(CFG_SDRAM_BASE + 16 * 1024 * 1024)
+
+#define CFG_MONITOR_BASE	(R0P7785LC0011RL_FLASH_BASE_1)
+#define CFG_MONITOR_LEN		(512 * 1024)
+#define CFG_MALLOC_LEN		(512 * 1024)
+#define CFG_GBL_DATA_SIZE	(256)
+#define CFG_BOOTMAPSZ		(8 * 1024 * 1024)
+
+/* FLASH */
+#define CFG_FLASH_CFI
+#define CFG_FLASH_CFI_DRIVER
+#undef  CFG_FLASH_QUIET_TEST
+#define CFG_FLASH_EMPTY_INFO
+#define CFG_FLASH_BASE		(R0P7785LC0011RL_FLASH_BASE_1)
+#define CFG_MAX_FLASH_SECT	512
+
+#define CFG_MAX_FLASH_BANKS	1
+#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE + \
+				 (0 * R0P7785LC0011RL_FLASH_BANK_SIZE) }
+
+#define CFG_FLASH_ERASE_TOUT	(3 * 1000)
+#define CFG_FLASH_WRITE_TOUT	(3 * 1000)
+#define CFG_FLASH_LOCK_TOUT	(3 * 1000)
+#define CFG_FLASH_UNLOCK_TOUT	(3 * 1000)
+
+#undef  CFG_FLASH_PROTECTION
+#undef  CFG_DIRECT_FLASH_TFTP
+
+/* R8A66597 */
+#define LITTLEENDIAN			/* for include/usb.h */
+#define CONFIG_USB_R8A66597_HCD
+#define CONFIG_R8A66597_BASE_ADDR	R0P7785LC0011RL_USB_BASE
+#define CONFIG_R8A66597_XTAL		0x0000	/* 12MHz */
+#define CONFIG_R8A66597_LDRV		0x8000	/* 3.3V */
+#define CONFIG_R8A66597_ENDIAN		0x0000	/* little */
+
+/* PCI Controller */
+#define CONFIG_PCI
+#define CONFIG_SH4_PCI
+#define CONFIG_SH7780_PCI
+#define CONFIG_PCI_PNP
+#define CONFIG_PCI_SCAN_SHOW	1
+#define __io
+#define __mem_pci
+
+#define CONFIG_PCI_MEM_BUS	0xFD000000	/* Memory space base addr */
+#define CONFIG_PCI_MEM_PHYS	CONFIG_PCI_MEM_BUS
+#define CONFIG_PCI_MEM_SIZE	0x01000000	/* Size of Memory window */
+
+#define CONFIG_PCI_IO_BUS	0xFE200000	/* IO space base address */
+#define CONFIG_PCI_IO_PHYS	CONFIG_PCI_IO_BUS
+#define CONFIG_PCI_IO_SIZE	0x00200000	/* Size of IO window */
+
+/* Network device (RTL8169) support */
+#define CONFIG_NET_MULTI
+#define CONFIG_RTL8169
+
+/* ENV setting */
+#define CFG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_OVERWRITE	1
+#define CFG_ENV_SECT_SIZE	(256 * 1024)
+#define CFG_ENV_SIZE		(CFG_ENV_SECT_SIZE)
+#define CFG_ENV_ADDR		(CFG_FLASH_BASE + CFG_MONITOR_LEN)
+#define CFG_ENV_OFFSET		(CFG_ENV_ADDR - CFG_FLASH_BASE)
+#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SECT_SIZE)
+
+/* Board Clock */
+/* The SCIF used external clock. system clock only used timer. */
+#define CONFIG_SYS_CLK_FREQ	50000000
+#define TMU_CLK_DIVIDER		4
+#define CFG_HZ			(CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER)
+
+#endif	/* __R0P7785LC0011RL_H */




More information about the U-Boot mailing list