[U-Boot-Users] [PATCH 3/6] sbc8560: define eth0 and eth1 instead of eth1 and eth2

[Ben Warren]

Paul Gortmaker wrote:
> The existing config doesn't define CONFIG_HAS_ETH0, and so the
> fdt support doesn't update the zeros in the dtb local-mac with
> real data from the u-boot env.  Since the existing config is
> tailored to just two interfaces, get rid of the ETH2 definitions
> at the same time.
> ---
>  include/configs/sbc8560.h |    3 +--
>  1 files changed, 1 insertions(+), 2 deletions(-)
>
> diff --git a/include/configs/sbc8560.h b/include/configs/sbc8560.h
> index f07fbc0..e5195e0 100644
> --- a/include/configs/sbc8560.h
> +++ b/include/configs/sbc8560.h
> @@ -407,11 +407,10 @@
>  
>  /*Note: change below for your network setting!!! */
>  #if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC)
> +#  define CONFIG_HAS_ETH0
>  #  define CONFIG_ETHADDR	00:01:af:07:9b:8a
>  #  define CONFIG_HAS_ETH1
>  #  define CONFIG_ETH1ADDR	00:01:af:07:9b:8b
> -#  define CONFIG_HAS_ETH2
> -#  define CONFIG_ETH2ADDR	00:01:af:07:9b:8c
>  #endif
>  
>  #define CONFIG_SERVERIP		192.168.0.131
>   
Please get rid of all default network parameters while you're at it (MAC 
addresses, IP addresses etc.)

regards,
Ben