[U-Boot-Users] [PATCH 3/7] sbc8560: define eth0 and eth1 instead of eth1 and eth2

Paul Gortmaker paul.gortmaker at windriver.com
Sat Jul 12 00:03:52 CEST 2008


Wolfgang Denk wrote:
>
>   
>> + * MAC addresses directly on it.
>> + */
>> +#if 0
>> +#define CONFIG_ETHADDR		00:01:af:07:9b:8a
>> +#define CONFIG_ETH1ADDR		00:01:af:07:9b:8b
>>  #define CONFIG_SERVERIP		192.168.0.131
>>  #define CONFIG_IPADDR		192.168.0.105
>> -#define CONFIG_GATEWAYIP	0.0.0.0
>> +#define CONFIG_GATEWAYIP	192.168.0.1
>>  #define CONFIG_NETMASK		255.255.255.0
>> +#endif
>> +
>>     
>
> I think this should be removed. There is really no good reason to add
> network configuration at all to  the  board  config  file  (with  the
> exception of the 2 or 3 boards which actually boot from real ROM).
>   

No problem.  I'll remove and resend.

Thanks,
Paul.

>
>
> Best regards,
>
> Wolfgang Denk
>
>   





More information about the U-Boot mailing list