[U-Boot-Users] Trouble with Make Command

[Rugunda, Solo]

Hi

I am fairly new to Uboot. I am having trouble running the "make" command
from the "u-boot-1.1.4/tools #" prompt.

When I do a make, this is the error I get

Makefile:108: /config.mk: No such file or directory
make: *** No rule to make target `/config.mk'.  Stop.

I am told by one of the developers that I need to have the correct make
parameters and told me to try this ...    make HOSTARCH=at91rm9200  ....
But I still get the same error

I believe that I don't have the parameters right OR I am missing
something in my make command. Do I have to say anything about the target
arch  or the cross compiler while writing the make command ?  My target
architecture is the at91rm9200 processor

Thanks



-----Original Message-----
From: wd at denx.de [mailto:wd at denx.de] 
Sent: Wednesday, July 16, 2008 4:53 AM
To: Rugunda, Solo
Cc: u-boot-users at lists.sourceforge.net
Subject: Re: [U-Boot-Users] Question about Bad CRC

In message <7773DF3D5AD05647B155E7F56554B45CCBED93 at srvhouexc13.nov.com>
you wrote:
> 
> 1. I think I might be making an error with the syntax. Can you verify
> that this is the exact correct syntax to fix the Bad CRC (quotations,
> colons etc)
> (or am I making an error somewhere in the syntax)
> 
> #define CONFIG_PREEBOOT "setenv preboot 'setenv preboot;saveenv';"
-------------------^^ typo

Try CONFIG_PREBOOT instead...

> 2. And also can you verify that I would add this line in the file that
I
> am adding this line of code to is at91rm9200dk.h in

Include/configs/at91rm9200dk.h is the configuration file for the  old
evaluation  kit;  I don;t think you should meddle with this file. You
should have your own board config file instead.

> -----Original Message-----
> From: wd at denx.de [mailto:wd at denx.de] 
...

Please don't top post / full quote.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
You have the capacity to learn from  mistakes.  You'll  learn  a  lot
today.