[U-Boot-Users] Freescale MPC8349EMDS BCSR corruption

[David Hawkins]

Hi Dave,

> I believe it is timing issue.
> The BCSR read(#LOE) has not enough setup time.
> You may try the two solutions:
> (a) slow down local bus clock
>     If you are using default configuration, the local bus clock is
> 66MHz. change the LCRR from div 4 to div 8 to make the local bus clock
> as 33MHz. you can find it in the MPC8349EMDS.h
> 
> (b) Tuning the #CS1 timing, such as
> change the OR1 from 0xFFFFE8F0 to 0xFFFFE9F7
> 
> Let us know the result.

Sorry for not getting back to you sooner, I've been out of
touch for the last week.

Freescale support responded that they were able to reproduce
the issue on their hardware. In case you are interested;
the support person in question was Fedor, and the SR# is
1-458670791. (I don't expect you to work on this, I'm just
providing the information in case you care to look at it).

I haven't talked in detail with Ira regarding the additional
tests he performed after I left last week, however, I believe
he changed the clock rates as you mentioned and the error
still occurred.

Our work-around that just writes the correct reset value to
BCSR[0] was sufficient to keep him working on productive code.

Since you were not able to reproduce the problem on your
hardware, I'm interested to learn how you determined that
the LOE# signal does not have enough setup time. Did you
look at the placed-and-routed BCSR project to determine
actual timing?

I have a copy of the Verilog code used in the BCSR, but not
the Xilinx ISE project. I'll take a more detailed look at the
code, but I won't be able to look at the timing, unless I ask
SR for an ISE project. I'll let them get back to me with
their solution before I go trying to get the project files.
Hopefully the fix will be to update the BCSR, and I'll just
have to build a Xilinx download cable, and use the free
web version of ISE to update the CPLD.

Thanks for helping look at this issue.

Cheers,
Dave