[U-Boot-Users] Freescale MPC8349EMDS BCSR corruption

[David Hawkins]

> I have a copy of the Verilog code used in the BCSR

I took a closer look at the Verilog code. Searching
for the I/O port nBCSR_CS within the code shows that
it is synchronized through a single register to the 33MHz
clock (which comes from on-board oscillator, not the
processor) to generate the signal nBCSRCSsyn.

This code is incorrect, the signal nBCSR_CS is asynchronous
relative to the 33MHz clock. As such, the signal should be
registered through two registers to synchronize it to the
33MHz clock domain.

This synchronization error would cause multiple transient issues.
These issues will not show up in simulation, as the
metastability of the register outputs is not simulated
(by Modelsim anyway). These issues will also show up on the
hardware, regardless of the PowerPC local clock setting, as
the BCSR is accessed in PowerPC LBC GPCM mode, and the CPLD
is using its own 33MHz clock to generate GPCM responses.

Cheers,
Dave