[U-Boot-Users] Stops booting after RAM info

[navin karnam]

Hi all,

I tried to debug why it is stopping after

DRAM Configuration:
Bank #0: a0000000 64 MB
Bank #1: a4000000  0 kB
Bank #2: a8000000  0 kB
Bank #3: ac000000  0 kB

It is unable to find the flash type;
and control is not coming out of flash_init() function.

Regards,
Naveen.

On Mon, Jun 16, 2008 at 1:35 PM, navin karnam <navin.karnam at gmail.com>
wrote:

>
>
> -- Hi all,
>
> I am new to this list, I planned port u-boot on my board(pxa255),
> followed the procedure in README and i am able to compile the uboot.
>
> I loaded the image on board. The messages i got when i boot the board
> are
>
> -------------------------------------------------------------
> U-Boot 0.4.5 (Jun 16 2008 - 12:24:00)
>
> U-Boot code: A3000000 -> A301BD30  BSS: -> A301FE98
> DRAM Configuration:
> Bank #0: a0000000 64 MB
> Bank #1: a4000000  0 kB
> Bank #2: a8000000  0 kB
> Bank #3: ac000000  0 kB
> -------------------------------------------------------------
>
>
> and it stops at that point. Please give me an hint where i am making the
> mistake.
>
> Regards,
> Naveen
>
>


-- 
Regards,
Naveen
Application Engineer
Innovate Software Solutions Pvt Ltd.,
Bengalooru
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20080617/7d062e62/attachment.htm