[U-Boot-Users] Stops booting after RAM info

[navin karnam]

I changed CFG_MAX_FLASH_BANKS from 2 to 1 soi am getting the
message as
Flash:  0 kB
*** Warning - bad CRC, using default environment

and stops there.

On Tue, Jun 17, 2008 at 10:29 AM, navin karnam <navin.karnam at gmail.com>
wrote:

> Hi all,
>
> I tried to debug why it is stopping after
>
> DRAM Configuration:
> Bank #0: a0000000 64 MB
> Bank #1: a4000000  0 kB
> Bank #2: a8000000  0 kB
> Bank #3: ac000000  0 kB
>
> It is unable to find the flash type;
> and control is not coming out of flash_init() function.
>
> Regards,
> Naveen.
>
> On Mon, Jun 16, 2008 at 1:35 PM, navin karnam <navin.karnam at gmail.com>
> wrote:
>
>>
>>
>> -- Hi all,
>>
>> I am new to this list, I planned port u-boot on my board(pxa255),
>> followed the procedure in README and i am able to compile the uboot.
>>
>> I loaded the image on board. The messages i got when i boot the board
>> are
>>
>> -------------------------------------------------------------
>> U-Boot 0.4.5 (Jun 16 2008 - 12:24:00)
>>
>> U-Boot code: A3000000 -> A301BD30  BSS: -> A301FE98
>> DRAM Configuration:
>> Bank #0: a0000000 64 MB
>> Bank #1: a4000000  0 kB
>> Bank #2: a8000000  0 kB
>> Bank #3: ac000000  0 kB
>> -------------------------------------------------------------
>>
>>
>> and it stops at that point. Please give me an hint where i am making the
>> mistake.
>>
>> Regards,
>> Naveen
>>
>>
>
>
> --
>



--
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20080617/b316764a/attachment.htm