[U-Boot-Users] [PATCH v2] Update Freescale sys_eeprom.c to handle CCID formats
Timur Tabi
timur at freescale.com
Fri Jun 20 16:59:03 CEST 2008
Update the sys_eeprom.c file to handle both NXID and CCID EEPROM formats. The
NXID format replaces the older CCID format, but it's important to support both
since most boards out there still use the CCID format. This change is in
preparation for using one file to handle both formats. This will also unify
EEPROM support for all Freescale 85xx and 86xx boards.
Also update the 86xx board header files to use the standard CFG_I2C_EEPROM_ADDR
instead of ID_EEPROM_ADDR.
Signed-off-by: Timur Tabi <timur at freescale.com>
---
This patch is the first in a series to clean up the MAC address determination
in some of Freescale's board. The ultimate goal is to get rid of
CONFIG_ETHADDR and related macros in the board header files.
board/freescale/common/sys_eeprom.c | 754 ++++++++++++++++++++++-------------
include/configs/MPC8610HPCD.h | 8 +-
include/configs/MPC8641HPCN.h | 8 +-
3 files changed, 478 insertions(+), 292 deletions(-)
rewrite board/freescale/common/sys_eeprom.c (78%)
diff --git a/board/freescale/common/sys_eeprom.c b/board/freescale/common/sys_eeprom.c
dissimilarity index 78%
index 8b13d06..d8631eb 100644
--- a/board/freescale/common/sys_eeprom.c
+++ b/board/freescale/common/sys_eeprom.c
@@ -1,284 +1,470 @@
-/*
- * Copyright 2006 Freescale Semiconductor
- * York Sun (yorksun at freescale.com)
- * Haiying Wang (haiying.wang at freescale.com)
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <command.h>
-#include <i2c.h>
-#include <linux/ctype.h>
-
-typedef struct {
- u8 id[4]; /* 0x0000 - 0x0003 EEPROM Tag */
- u8 sn[12]; /* 0x0004 - 0x000F Serial Number */
- u8 errata[5]; /* 0x0010 - 0x0014 Errata Level */
- u8 date[6]; /* 0x0015 - 0x001a Build Date */
- u8 res_0; /* 0x001b Reserved */
- u8 version[4]; /* 0x001c - 0x001f Version */
- u8 tempcal[8]; /* 0x0020 - 0x0027 Temperature Calibration Factors*/
- u8 tempcalsys[2]; /* 0x0028 - 0x0029 System Temperature Calibration Factors*/
- u8 res_1[22]; /* 0x0020 - 0x003f Reserved */
- u8 mac_size; /* 0x0040 Mac table size */
- u8 mac_flag; /* 0x0041 Mac table flags */
- u8 mac[8][6]; /* 0x0042 - 0x0071 Mac addresses */
- u32 crc; /* 0x0072 crc32 checksum */
-} EEPROM_data;
-
-static EEPROM_data mac_data;
-
-int mac_show(void)
-{
- int i;
- u8 mac_size;
- unsigned char ethaddr[8][18];
- unsigned char enetvar[32];
-
- /* Show EEPROM tagID,
- * always the four characters 'NXID'.
- */
- printf("ID ");
- for (i = 0; i < 4; i++)
- printf("%c", mac_data.id[i]);
- printf("\n");
-
- /* Show Serial number,
- * 0 to 11 charaters of errata information.
- */
- printf("SN ");
- for (i = 0; i < 12; i++)
- printf("%c", mac_data.sn[i]);
- printf("\n");
-
- /* Show Errata Level,
- * 0 to 4 characters of errata information.
- */
- printf("Errata ");
- for (i = 0; i < 5; i++)
- printf("%c", mac_data.errata[i]);
- printf("\n");
-
- /* Show Build Date,
- * BCD date values, as YYMMDDhhmmss.
- */
- printf("Date 20%02x/%02x/%02x %02x:%02x:%02x\n",
- mac_data.date[0],
- mac_data.date[1],
- mac_data.date[2],
- mac_data.date[3],
- mac_data.date[4],
- mac_data.date[5]);
-
- /* Show MAC table size,
- * Value from 0 to 7 indicating how many MAC
- * addresses are stored in the system EEPROM.
- */
- if((mac_data.mac_size > 0) && (mac_data.mac_size <= 8))
- mac_size = mac_data.mac_size;
- else
- mac_size = 8; /* Set the max size */
- printf("MACSIZE %x\n", mac_size);
-
- /* Show Mac addresses */
- for (i = 0; i < mac_size; i++) {
- sprintf((char *)ethaddr[i],
- "%02x:%02x:%02x:%02x:%02x:%02x",
- mac_data.mac[i][0],
- mac_data.mac[i][1],
- mac_data.mac[i][2],
- mac_data.mac[i][3],
- mac_data.mac[i][4],
- mac_data.mac[i][5]);
- printf("MAC %d %s\n", i, ethaddr[i]);
-
- sprintf((char *)enetvar,
- i ? "eth%daddr" : "ethaddr", i);
- setenv((char *)enetvar, (char *)ethaddr[i]);
-
- }
-
- return 0;
-}
-
-int mac_read(void)
-{
- int ret, length;
- unsigned int crc = 0;
- unsigned char dev = ID_EEPROM_ADDR, *data;
-
- length = sizeof(EEPROM_data);
- ret = i2c_read(dev, 0, 1, (unsigned char *)(&mac_data), length);
- if (ret) {
- printf("Read failed.\n");
- return -1;
- }
-
- data = (unsigned char *)(&mac_data);
- printf("Check CRC on reading ...");
- crc = crc32(crc, data, length - 4);
- if (crc != mac_data.crc) {
- printf("CRC checksum is invalid, in EEPROM CRC is %x, calculated CRC is %x\n",
- mac_data.crc, crc);
- return -1;
- } else {
- printf("CRC OK\n");
- mac_show();
- }
- return 0;
-}
-
-int mac_prog(void)
-{
- int ret, i, length;
- unsigned int crc = 0;
- unsigned char dev = ID_EEPROM_ADDR, *ptr;
- unsigned char *eeprom_data = (unsigned char *)(&mac_data);
-
- mac_data.res_0 = 0;
- memset((void *)mac_data.res_1, 0, sizeof(mac_data.res_1));
-
- length = sizeof(EEPROM_data);
- crc = crc32(crc, eeprom_data, length - 4);
- mac_data.crc = crc;
- for (i = 0, ptr = eeprom_data; i < length; i += 8, ptr += 8) {
- ret = i2c_write(dev, i, 1, ptr, min((length - i),8));
- udelay(5000); /* 5ms write cycle timing */
- if (ret)
- break;
- }
- if (ret) {
- printf("Programming failed.\n");
- return -1;
- } else {
- printf("Programming %d bytes. Reading back ...\n", length);
- mac_read();
- }
- return 0;
-}
-
-int do_mac(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
-{
- int i;
- char cmd = 's';
- unsigned long long mac_val;
-
- if (i2c_probe(ID_EEPROM_ADDR) != 0)
- return -1;
-
- if (argc > 1) {
- cmd = argv[1][0];
- switch (cmd) {
- case 'r': /* display */
- mac_read();
- break;
- case 's': /* save */
- mac_prog();
- break;
- case 'i': /* id */
- for (i = 0; i < 4; i++) {
- mac_data.id[i] = argv[2][i];
- }
- break;
- case 'n': /* serial number */
- for (i = 0; i < 12; i++) {
- mac_data.sn[i] = argv[2][i];
- }
- break;
- case 'e': /* errata */
- for (i = 0; i < 5; i++) {
- mac_data.errata[i] = argv[2][i];
- }
- break;
- case 'd': /* date */
- mac_val = simple_strtoull(argv[2], NULL, 16);
- for (i = 0; i < 6; i++) {
- mac_data.date[i] = (mac_val >> (40 - 8 * i));
- }
- break;
- case 'p': /* mac table size */
- mac_data.mac_size =
- (unsigned char)simple_strtoul(argv[2], NULL, 16);
- break;
- case '0': /* mac 0 */
- case '1': /* mac 1 */
- case '2': /* mac 2 */
- case '3': /* mac 3 */
- case '4': /* mac 4 */
- case '5': /* mac 5 */
- case '6': /* mac 6 */
- case '7': /* mac 7 */
- mac_val = simple_strtoull(argv[2], NULL, 16);
- for (i = 0; i < 6; i++) {
- mac_data.mac[cmd - '0'][i] =
- *((unsigned char *)
- (((unsigned int)(&mac_val)) + i + 2));
- }
- break;
- case 'h': /* help */
- default:
- printf("Usage:\n%s\n", cmdtp->usage);
- break;
- }
- } else {
- mac_show();
- }
- return 0;
-}
-
-int mac_read_from_eeprom(void)
-{
- int length, i;
- unsigned char dev = ID_EEPROM_ADDR;
- unsigned char *data;
- unsigned char ethaddr[4][18];
- unsigned char enetvar[32];
- unsigned int crc = 0;
-
- length = sizeof(EEPROM_data);
- if (i2c_read(dev, 0, 1, (unsigned char *)(&mac_data), length)) {
- printf("Read failed.\n");
- return -1;
- }
-
- data = (unsigned char *)(&mac_data);
- crc = crc32(crc, data, length - 4);
- if (crc != mac_data.crc) {
- return -1;
- } else {
- for (i = 0; i < 4; i++) {
- if (memcmp(&mac_data.mac[i], "\0\0\0\0\0\0", 6)) {
- sprintf((char *)ethaddr[i],
- "%02x:%02x:%02x:%02x:%02x:%02x",
- mac_data.mac[i][0],
- mac_data.mac[i][1],
- mac_data.mac[i][2],
- mac_data.mac[i][3],
- mac_data.mac[i][4],
- mac_data.mac[i][5]);
- sprintf((char *)enetvar,
- i ? "eth%daddr" : "ethaddr",
- i);
- setenv((char *)enetvar, (char *)ethaddr[i]);
- }
- }
- }
- return 0;
-}
+/*
+ * Copyright 2006, 2008 Freescale Semiconductor
+ * York Sun (yorksun at freescale.com)
+ * Haiying Wang (haiying.wang at freescale.com)
+ * Timur Tabi (timur at freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include <i2c.h>
+#include <linux/ctype.h>
+
+#include "../common/eeprom.h"
+
+#if !defined(CFG_I2C_EEPROM_CCID) && !defined(CFG_I2C_EEPROM_NXID)
+#error "Please define either CFG_I2C_EEPROM_CCID or CFG_I2C_EEPROM_NXID"
+#endif
+
+/**
+ * static eeprom: EEPROM layout for CCID or NXID formats
+ *
+ * See application note AN3638 for details.
+ */
+static struct __attribute__ ((__packed__)) eeprom {
+#ifdef CFG_I2C_EEPROM_CCID
+ u8 id[4]; /* 0x00 - 0x03 EEPROM Tag 'CCID' */
+ u8 major; /* 0x04 Board revision, major */
+ u8 minor; /* 0x05 Board revision, minor */
+ u8 sn[10]; /* 0x06 - 0x0F Serial Number*/
+ u8 errata[2]; /* 0x10 - 0x11 Errata Level */
+ u8 date[6]; /* 0x12 - 0x17 Build Date */
+ u8 res_0[40]; /* 0x18 - 0x3f Reserved */
+ u8 mac_count; /* 0x40 Number of MAC addresses */
+ u8 mac_flag; /* 0x41 MAC table flags */
+ u8 mac[8][6]; /* 0x42 - 0x71 MAC addresses */
+ u32 crc; /* 0x72 CRC32 checksum */
+#endif
+#ifdef CFG_I2C_EEPROM_NXID
+ u8 id[4]; /* 0x00 - 0x03 EEPROM Tag 'NXID' */
+ u8 sn[12]; /* 0x04 - 0x0F Serial Number */
+ u8 errata[5]; /* 0x10 - 0x14 Errata Level */
+ u8 date[6]; /* 0x15 - 0x1a Build Date */
+ u8 res_0; /* 0x1b Reserved */
+ u32 version; /* 0x1c - 0x1f NXID Version */
+ u8 tempcal[8]; /* 0x20 - 0x27 Temperature Calibration Factors */
+ u8 tempcalsys[2]; /* 0x28 - 0x29 System Temperature Calibration Factors */
+ u8 tempcalflags; /* 0x2a Temperature Calibration Flags */
+ u8 res_1[21]; /* 0x2b - 0x3f Reserved */
+ u8 mac_count; /* 0x40 Number of MAC addresses */
+ u8 mac_flag; /* 0x41 MAC table flags */
+ u8 mac[8][6]; /* 0x42 - 0x71 MAC addresses */
+ u32 crc; /* 0x72 CRC32 checksum */
+#endif
+} e;
+
+/* Set to 1 if we've read EEPROM into memory */
+static int has_been_read = 0;
+
+#ifdef CFG_I2C_EEPROM_NXID
+/* Is this a valid NXID EEPROM? */
+#define is_valid (*((u32 *)e.id) == (('N' << 24) | ('X' << 16) | ('I' << 8) | 'D'))
+#endif
+
+#ifdef CFG_I2C_EEPROM_CCID
+/* Is this a valid CCID EEPROM? */
+#define is_valid (*((u32 *)e.id) == (('C' << 24) | ('C' << 16) | ('I' << 8) | 'D'))
+#endif
+
+/**
+ * show_eeprom - display the contents of the EEPROM
+ */
+static void show_eeprom(void)
+{
+ int i;
+ unsigned int crc;
+
+ /* EEPROM tag ID, either CCID or NXID */
+#ifdef CFG_I2C_EEPROM_NXID
+ printf("ID: %c%c%c%c v%u\n", e.id[0], e.id[1], e.id[2], e.id[3],
+ be32_to_cpu(e.version));
+#else
+ printf("ID: %c%c%c%c\n", e.id[0], e.id[1], e.id[2], e.id[3]);
+#endif
+
+ /* Serial number */
+ printf("SN: %s\n", e.sn);
+
+ /* Errata level. */
+#ifdef CFG_I2C_EEPROM_NXID
+ printf("Errata: %s\n", e.errata);
+#else
+ printf("Errata: %c%c\n",
+ e.errata[0] ? e.errata[0] : '.',
+ e.errata[1] ? e.errata[1] : '.');
+#endif
+
+ /* Build date, BCD date values, as YYMMDDhhmmss */
+ printf("Build date: 20%02x/%02x/%02x %02x:%02x:%02x %s\n",
+ e.date[0], e.date[1], e.date[2],
+ e.date[3] & 0x7F, e.date[4], e.date[5],
+ e.date[3] & 0x80 ? "PM" : "");
+
+ /* Show MAC addresses */
+ for (i = 0; i < min(e.mac_count, 8); i++) {
+ u8 *p = e.mac[i];
+
+ printf("Eth%u: %02x:%02x:%02x:%02x:%02x:%02x\n", i,
+ p[0], p[1], p[2], p[3], p[4], p[5]);
+ }
+
+ crc = crc32(0, (void *)&e, sizeof(e) - 4);
+
+ if (crc == be32_to_cpu(e.crc))
+ printf("CRC: %08x\n", be32_to_cpu(e.crc));
+ else
+ printf("CRC: %08x (should be %08x)\n",
+ be32_to_cpu(e.crc), crc);
+
+#ifdef DEBUG
+ printf("EEPROM dump: (0x%x bytes)\n", sizeof(e));
+ for (i = 0; i < sizeof(e); i++) {
+ if ((i % 16) == 0)
+ printf("%02X: ", i);
+ printf("%02X ", ((u8 *)&e)[i]);
+ if (((i % 16) == 15) || (i == sizeof(e) - 1))
+ printf("\n");
+ }
+#endif
+}
+
+/**
+ * read_eeprom - read the EEPROM into memory
+ */
+static int read_eeprom(void)
+{
+ int ret;
+#ifdef CFG_EEPROM_BUS_NUM
+ unsigned int bus;
+#endif
+
+ if (has_been_read)
+ return 0;
+
+#ifdef CFG_EEPROM_BUS_NUM
+ bus = i2c_get_bus_num();
+ i2c_set_bus_num(CFG_EEPROM_BUS_NUM);
+#endif
+
+ ret = i2c_read(CFG_I2C_EEPROM_ADDR, 0, CFG_I2C_EEPROM_ADDR_LEN,
+ (void *)&e, sizeof(e));
+
+#ifdef CFG_EEPROM_BUS_NUM
+ i2c_set_bus_num(bus);
+#endif
+
+#ifdef DEBUG
+ show_eeprom();
+#endif
+
+ has_been_read = (ret == 0) ? 1 : 0;
+
+ return ret;
+}
+
+/**
+ * prog_eeprom - write the EEPROM from memory
+ */
+static int prog_eeprom(void)
+{
+ int ret, i, length;
+ unsigned int crc;
+ void *p;
+#ifdef CFG_EEPROM_BUS_NUM
+ unsigned int bus;
+#endif
+
+ /* Set the reserved values to 0xFF */
+#ifdef CFG_I2C_EEPROM_NXID
+ e.res_0 = 0xFF;
+ memset(e.res_1, 0xFF, sizeof(e.res_1));
+#else
+ memset(e.res_0, 0xFF, sizeof(e.res_0));
+#endif
+
+ length = sizeof(e);
+ crc = crc32(0, (void *)&e, length - 4);
+ e.crc = cpu_to_be32(crc);
+
+#ifdef CFG_EEPROM_BUS_NUM
+ bus = i2c_get_bus_num();
+ i2c_set_bus_num(CFG_EEPROM_BUS_NUM);
+#endif
+
+ for (i = 0, p = &e; i < length; i += 8, p += 8) {
+ ret = i2c_write(CFG_I2C_EEPROM_ADDR, i, CFG_I2C_EEPROM_ADDR_LEN,
+ p, min((length - i), 8));
+ if (ret)
+ break;
+ udelay(5000); /* 5ms write cycle timing */
+ }
+
+#ifdef CFG_EEPROM_BUS_NUM
+ i2c_set_bus_num(bus);
+#endif
+
+ if (ret) {
+ printf("Programming failed.\n");
+ return -1;
+ }
+
+ printf("Programming passed.\n");
+ return 0;
+}
+
+/**
+ * h2i - converts hex character into a number
+ *
+ * This function takes a hexadecimal character (e.g. '7' or 'C') and returns
+ * the integer equivalent.
+ */
+static inline u8 h2i(char p)
+{
+ if ((p >= '0') && (p <= '9'))
+ return p - '0';
+
+ if ((p >= 'A') && (p <= 'F'))
+ return (p - 'A') + 10;
+
+ if ((p >= 'a') && (p <= 'f'))
+ return (p - 'a') + 10;
+
+ return 0;
+}
+
+/**
+ * set_date - stores the build date into the EEPROM
+ *
+ * This function takes a pointer to a string in the format "YYMMDDhhmmss"
+ * (2-digit year, 2-digit month, etc), converts it to a 6-byte BCD string,
+ * and stores it in the build date field of the EEPROM local copy.
+ */
+static void set_date(const char *string)
+{
+ unsigned int i;
+
+ if (strlen(string) != 12) {
+ printf("Usage: mac date YYMMDDhhmmss\n");
+ return;
+ }
+
+ for (i = 0; i < 6; i++)
+ e.date[i] = h2i(string[2 * i]) << 4 | h2i(string[2 * i + 1]);
+}
+
+/**
+ * set_mac_address - stores a MAC address into the EEPROM
+ *
+ * This function takes a pointer to MAC address string
+ * (i.e."XX:XX:XX:XX:XX:XX", where "XX" is a two-digit hex number) and
+ * stores it in one of the MAC address fields of the EEPROM local copy.
+ */
+static void set_mac_address(unsigned int index, const char *string)
+{
+ char *p = (char *) string;
+ unsigned int i;
+
+ if (!string) {
+ printf("Usage: mac <n> XX:XX:XX:XX:XX:XX\n");
+ return;
+ }
+
+ for (i = 0; *p && (i < 6); i++) {
+ e.mac[index][i] = simple_strtoul(p, &p, 16);
+ if (*p == ':')
+ p++;
+ }
+}
+
+int do_mac(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ int i;
+ char cmd;
+
+ if (argc == 1) {
+ show_eeprom();
+ return 0;
+ }
+
+ cmd = argv[1][0];
+
+ if (cmd == 'r') {
+ read_eeprom();
+ return 0;
+ }
+
+ if ((cmd == 'i') && (argc > 2)) {
+ for (i = 0; i < 4; i++)
+ e.id[i] = argv[2][i];
+ return 0;
+ }
+
+ if (!is_valid) {
+ printf("Please read the EEPROM ('r') and/or set the ID ('i') first.\n");
+ return 0;
+ }
+
+ if (argc == 2) {
+ switch (cmd) {
+ case 's': /* save */
+ prog_eeprom();
+ break;
+ default:
+ printf("Usage:\n%s\n", cmdtp->usage);
+ break;
+ }
+
+ return 0;
+ }
+
+ /* We know we have at least one parameter */
+
+ switch (cmd) {
+ case 'n': /* serial number */
+ memset(e.sn, 0, sizeof(e.sn));
+ strncpy((char *)e.sn, argv[2], sizeof(e.sn) - 1);
+ break;
+ case 'e': /* errata */
+#ifdef CFG_I2C_EEPROM_NXID
+ memset(e.errata, 0, 5);
+ strncpy((char *)e.errata, argv[2], 4);
+#else
+ e.errata[0] = argv[2][0];
+ e.errata[1] = argv[2][1];
+#endif
+ break;
+ case 'd': /* date BCD format YYMMDDhhmmss */
+ set_date(argv[2]);
+ break;
+ case 'p': /* MAC table size */
+ e.mac_count = simple_strtoul(argv[2], NULL, 16);
+ break;
+ case '0' ... '7': /* "mac 0" through "mac 7" */
+ set_mac_address(cmd - '0', argv[2]);
+ break;
+ case 'h': /* help */
+ default:
+ printf("Usage:\n%s\n", cmdtp->usage);
+ break;
+ }
+
+ return 0;
+}
+
+/**
+ * mac_read_from_eeprom - read the MAC addresses from EEPROM
+ *
+ * This function reads the MAC addresses from EEPROM and sets the
+ * appropriate environment variables for each one read.
+ *
+ * The environment variables are only set if they haven't been set already.
+ * This ensures that any user-saved variables are never overwritten.
+ *
+ * This function must be called after relocation.
+ */
+int mac_read_from_eeprom(void)
+{
+ unsigned int i;
+
+ if (read_eeprom()) {
+ printf("Read failed.\n");
+ return -1;
+ }
+
+ if (!is_valid) {
+ printf("Invalid ID (%02x %02x %02x %02x)\n", e.id[0], e.id[1], e.id[2], e.id[3]);
+ return -1;
+ }
+
+ if (be32_to_cpu(e.crc) != 0xFFFFFFFF) {
+ u32 crc = crc32(0, (void *)&e, sizeof(e) - 4);
+
+ if (crc != be32_to_cpu(e.crc)) {
+ printf("CRC mismatch (%08x != %08x).\n", crc,
+ be32_to_cpu(e.crc));
+ return -1;
+ }
+ }
+
+ for (i = 0; i < min(4, e.mac_count); i++) {
+ if (memcmp(&e.mac[i], "\0\0\0\0\0\0", 6) &&
+ memcmp(&e.mac[i], "\xFF\xFF\xFF\xFF\xFF\xFF", 6)) {
+ char ethaddr[18];
+ char enetvar[9];
+
+ sprintf(ethaddr, "%02X:%02X:%02X:%02X:%02X:%02X",
+ e.mac[i][0],
+ e.mac[i][1],
+ e.mac[i][2],
+ e.mac[i][3],
+ e.mac[i][4],
+ e.mac[i][5]);
+ sprintf(enetvar, i ? "eth%daddr" : "ethaddr", i);
+ /* Only initialize environment variables that are blank
+ * (i.e. have not yet been set)
+ */
+ if (!getenv(enetvar))
+ setenv(enetvar, ethaddr);
+ }
+ }
+
+ return 0;
+}
+
+#ifdef CFG_I2C_EEPROM_CCID
+
+/**
+ * get_cpu_board_revision - get the CPU board revision on 85xx boards
+ *
+ * Read the EEPROM to determine the board revision.
+ *
+ * This function is called before relocation, so we need to read a private
+ * copy of the EEPROM into a local variable on the stack.
+ *
+ * Also, we assume that CFG_EEPROM_BUS_NUM == CFG_SPD_BUS_NUM. The global
+ * variable i2c_bus_num must be compile-time initialized to CFG_SPD_BUS_NUM,
+ * so that the SPD code will work. This means that all pre-relocation I2C
+ * operations can only occur on the CFG_SPD_BUS_NUM bus. So if
+ * CFG_EEPROM_BUS_NUM != CFG_SPD_BUS_NUM, then we can't read the EEPROM when
+ * this function is called. Oh well.
+ */
+unsigned int get_cpu_board_revision(void)
+{
+ struct board_eeprom {
+ u32 id; /* 0x00 - 0x03 EEPROM Tag 'CCID' */
+ u8 major; /* 0x04 Board revision, major */
+ u8 minor; /* 0x05 Board revision, minor */
+ } be;
+
+ i2c_read(CFG_I2C_EEPROM_ADDR, 0, CFG_I2C_EEPROM_ADDR_LEN,
+ (void *)&be, sizeof(be));
+
+ if (be.id != (('C' << 24) | ('C' << 16) | ('I' << 8) | 'D'))
+ return MPC85XX_CPU_BOARD_REV(0, 0);
+
+ if ((be.major == 0xff) && (be.minor == 0xff))
+ return MPC85XX_CPU_BOARD_REV(0, 0);
+
+ return MPC85XX_CPU_BOARD_REV(e.major, e.minor);
+}
+
+#endif
+
diff --git a/include/configs/MPC8610HPCD.h b/include/configs/MPC8610HPCD.h
index 15ff0ea..0f2f3da 100644
--- a/include/configs/MPC8610HPCD.h
+++ b/include/configs/MPC8610HPCD.h
@@ -141,11 +141,11 @@
#endif
#endif
-#define CFG_ID_EEPROM
-#ifdef CFG_ID_EEPROM
#define CONFIG_ID_EEPROM
-#endif
-#define ID_EEPROM_ADDR 0x57
+#define CFG_I2C_EEPROM_NXID
+#define CFG_ID_EEPROM
+#define CFG_I2C_EEPROM_ADDR 0x57
+#define CFG_I2C_EEPROM_ADDR_LEN 1
#define CFG_FLASH_BASE 0xf0000000 /* start of FLASH 128M */
diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h
index 9acc3da..1302e3e 100644
--- a/include/configs/MPC8641HPCN.h
+++ b/include/configs/MPC8641HPCN.h
@@ -152,11 +152,11 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
#define CFG_DDR_CS5_BNDS 0x00000FFF /* Not done */
#endif
-#define CFG_ID_EEPROM 1
-#ifdef CFG_ID_EEPROM
#define CONFIG_ID_EEPROM
-#endif
-#define ID_EEPROM_ADDR 0x57
+#define CFG_I2C_EEPROM_NXID
+#define CFG_ID_EEPROM
+#define CFG_I2C_EEPROM_ADDR 0x57
+#define CFG_I2C_EEPROM_ADDR_LEN 1
/*
* In MPC8641HPCN, allocate 16MB flash spaces at fe000000 and ff000000.
--
1.5.5
More information about the U-Boot
mailing list