[U-Boot-Users] Ethernet stopped working after upgrading from 1.1.5 to 1.3.3

[Stuart Wood]

Hi all,

Can anyone point me in the right direction to figure out why
after porting up to 1.3.3 from 1.1.5 I'm getting a
"No ethernet found." error.

I'm using a cirrus logic EP9302 Arm processor that was someone
initially ported to u-boot 1.1.5. So I'm not to familiar with how the
CPU specific files should be laid out.

Did the config commands change to set up Ethernet?

The Ethernet driver for the chip is under cpu/arm920t/ep93xx/eth.c

Any suggestions would be appreciated.

Thanks

-- 
Stuart Wood

Lab X Technologies, LLC
176 Anderson Ave.
Suite 302
Rochester, NY 14607
Phone: (585) 271-7790 x207
Fax: (585) 473.4707