[U-Boot-Users] Ethernet stopped working after upgrading from 1.1.5 to 1.3.3

[Ben Warren]

Hi Stuart,

Stuart Wood wrote:
> Hi all,
>
> Can anyone point me in the right direction to figure out why
> after porting up to 1.3.3 from 1.1.5 I'm getting a
> "No ethernet found." error.
>
> I'm using a cirrus logic EP9302 Arm processor that was someone
> initially ported to u-boot 1.1.5. So I'm not to familiar with how the
> CPU specific files should be laid out.
>
> Did the config commands change to set up Ethernet?
>
> The Ethernet driver for the chip is under cpu/arm920t/ep93xx/eth.c
>
>   
There's no 'ep93xx' in the source code.  Where did you get it from?

regards,
Ben