[U-Boot-Users] (no subject)

[Stefan Roese]

On Friday 29 February 2008, Maupin, Chase wrote:
> > implementation.  Is this
> > > problem in the 1.2.0 version of u-boot?
> >
> > No, I don't think so. This thread was related to problem with the
> > rewrite of the U-Boot NAND subsystem. The current implementation
> > should handle writing images (YAFFS, JFFS2) just fine. Please make
> > sure that you use the ".jffs2"
> > extension.
>
> I wrote the image by doing (my file system partition is at offset
> 0x460000 and my jffs2 image size is 0x288000 downloaded to 0x80700000):
> 	# nand erase 0x460000 0x288000
> 	# nand write.jffs2 0x80700000 0x460000 0x288000
>
> I can successfully write this same image from a booted Linux system
> using the "nandwrite" command.

Perhaps its a problem of the U-Boot NAND driver for your platform. Is this 
board/platform supported in the official U-Boot version? What platform are 
you using btw? And are using software or hardware ECC generation in the NAND 
driver?

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================