[U-Boot-Users] ppc4xx: PCI init failure on kilauea?

[Stefan Roese]

On Monday 03 March 2008, H L wrote:
> Greetings from Austin, TX.  My first posting to this list.  Searched
> through the archives first, but didn't see any mention, so.....
>
> On recently obtained new kilauea boards, I noted on all of them PCI init
> failure at boot:
>
> U-Boot 1.3.1-g5dd372a2 (Jan 14 2008 - 11:01:38)

<snip>

> val is coming back with a value of zero.  This occurs whether or not any
> adapters are plugged into the PCIe slots.  Anyone else seeing this?

Are you using the ATX power supply or the external 5V power supply? You have 
to use the ATX power supply for the PCIe slots to work correctly. I'm pretty 
sure this is your problem.

If not, then please list which PCIe boards are failing on your system.

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================