[U-Boot-Users] [PATCH] add config options for VSC8601 RGMII PHY - 2nd try

[Wolfgang Denk]

In message <48175868.5090501 at matrix-vision.de> you wrote:
> The Vitesse VSC8601 RGMII PHY has internal delay for both Rx
> and Tx clock lines. They are configured using 2 bits in extended
> register 0x17.
> Therefore CFG_VSC8601_SKEW_TX and CFG_VSC8601_SKEW_RX have
> been introduced with valid values 0-3 giving 0.0, 1.4,1.7 and 2.0ns delay.
> 
> Signed-off-by: Andre Schwarz <andre.schwarz at matrix-vision.de>

Applied, but manually - please fix your Thunderbird configuration, or
even better, use git-send-mail to send patches. This is what I get:

Applying add config options for VSC8601 RGMII PHY - 2nd try
error: patch failed: drivers/net/tsec.c:1277
error: drivers/net/tsec.c: patch does not apply
error: patch failed: drivers/net/tsec.h:112
error: drivers/net/tsec.h: patch does not apply
Using index info to reconstruct a base tree...
error: patch failed: drivers/net/tsec.c:1277
error: drivers/net/tsec.c: patch does not apply
error: patch failed: drivers/net/tsec.h:112
error: drivers/net/tsec.h: patch does not apply
Did you hand edit your patch?
It does not apply to blobs recorded in its index.
Cannot fall back to three-way merge.
Patch failed at 0001.


The patch was sent white-space corrupted...

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Prediction is very difficult, especially of the future.  - Niels Bohr