[U-Boot-Users] Latest U-Boot MD5 compile error??

[Russell McGuire]

Not sure where exactly yet, but I have tracked this down to someplace
between Release v1.3.2 and Tag v1.3.3-rc1 is where it breaks on my FC5
machine.

Using 'git checkout -f v.1.3.xx', full clean, reconfigure, etc..

I am checking out intermediate versions now to see exactly what commit is
causing this.

I'll post the SHA number when I find where in the tree, or better yet if I
find the offending code / incompatibility with my FC5 machine.

-----Original Message-----
From: wd at denx.de [mailto:wd at denx.de] 
Sent: Wednesday, May 28, 2008 2:56 PM
To: rmcguire at videopresence.com
Cc: u-boot-users at lists.sourceforge.net
Subject: Re: [U-Boot-Users] Latest U-Boot MD5 compile error??

In message <F9448BAF273D479DB7935923C812A0BB at absolutdaddy> you wrote:
> 
> Just pulled the latest GIT down today <1.3.3+>, merged with my current
code.
> 
> <Note, last I pulled was back at 1.3.1>.
> 
> Anyway, all is well until the newish MD5 code attempts to compile then I
get
> two different types of errors. <See Log Below>
> 
> Is this an artificat of an uncomplete merge perhaps? 

Probably. Try building for some other boards...

> Dependencies on a certain level of kernel that needs to be sitting in the
> ppc_6xx/usr/src/ directory? Or perhaps is FC5 to old to now correctly
> compile the latest U-boot?
> To old of an ELDK? <I am using ELDK 4.1>

Just tried to build a few boards on a FC5 host. A few warnings about
including /usr/include/asm/byteorder.h, but it builds fine.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
       There is enough for the need of everyone in this world,
       but not for the greed of everyone.     - Mahatma Gandhi