[U-Boot] Pull request u-boot-blackfin.git
Wolfgang Denk
wd at denx.de
Sat Nov 1 16:05:20 CET 2008
Dear Mike Frysinger,
In message <1224753122-30077-1-git-send-email-vapier at gentoo.org> you wrote:
> The following changes since commit d9d8c7c696dec370ca714c03beb6e79d4c90bd5e:
> Wolfgang Denk (1):
> Fix strmhz(): avoid printing negative fractions
>
> are available in the git repository at:
>
> git://www.denx.de/git/u-boot-blackfin.git master
>
> Ben Maan (1):
> Blackfin: fix port mux defines for BF54x
>
> Mike Frysinger (25):
> Blackfin: unify DSPID/DBGSTAT MMR definitions
> Blackfin: update anomaly lists
> Blackfin: fix typo in boot mode comment and add NAND define
> Blackfin: delete unused page_descriptor_table_size define
> Blackfin: punt old unused mem_init.h header
> Blackfin: only enable hardware error irq by default
> Blackfin: document some of the blackfin directories
> Blackfin: build with -fomit-frame-pointer
> Blackfin: fix SWRST register definition
> Blackfin: only initialize the RTC when actually used
> Blackfin: unify cache handling code
> Blackfin: drop unused cache flush code
> Blackfin: check cache bits, not cplb bits
> Blackfin: init NAND before relocating env
> Blackfin: enable support for nested interrupts
> Blackfin: don't bother displaying reboot msg when crashing
> Blackfin: fix register dump messages
> Blackfin: decode hwerrcause/excause when crashing
> Blackfin: make baud calculation more accurate
> Blackfin: set initial stack correctly according to Blackfin ABI
> Blackfin: small cpu init optimization while setting interrupt mask
> Blackfin: linker scripts: force start.o and set initcode boundaries
> Blackfin: bf561-ezkit: drop pointless USB code
> Blackfin: bf561-ezkit: drop redundant code
> Blackfin: fix up UART status bit handling
>
> README | 2 +
> blackfin_config.mk | 2 +-
> board/bf533-ezkit/u-boot.lds.S | 7 +-
> board/bf533-stamp/bf533-stamp.c | 1 -
> board/bf533-stamp/u-boot.lds.S | 7 +-
> board/bf537-stamp/u-boot.lds.S | 7 +-
> board/bf561-ezkit/bf561-ezkit.c | 21 +--
> board/bf561-ezkit/u-boot.lds.S | 7 +-
> cpu/blackfin/Makefile | 2 +-
> cpu/blackfin/cpu.c | 40 +---
> cpu/blackfin/flush.S | 230 --------------
> cpu/blackfin/serial.c | 72 ++++-
> cpu/blackfin/serial.h | 8 +-
> cpu/blackfin/start.S | 27 +-
> cpu/blackfin/traps.c | 54 +++-
> drivers/rtc/bfin_rtc.c | 19 +-
> include/asm-blackfin/blackfin-config-pre.h | 3 +-
> include/asm-blackfin/cplb.h | 5 -
> include/asm-blackfin/mach-bf527/BF522_cdef.h | 3 -
> include/asm-blackfin/mach-bf527/BF522_def.h | 1 -
> include/asm-blackfin/mach-bf527/BF523_cdef.h | 3 -
> include/asm-blackfin/mach-bf527/BF523_def.h | 1 -
> include/asm-blackfin/mach-bf527/BF524_cdef.h | 3 -
> include/asm-blackfin/mach-bf527/BF524_def.h | 1 -
> include/asm-blackfin/mach-bf527/BF525_cdef.h | 3 -
> include/asm-blackfin/mach-bf527/BF525_def.h | 1 -
> include/asm-blackfin/mach-bf527/BF526_cdef.h | 3 -
> include/asm-blackfin/mach-bf527/BF526_def.h | 1 -
> include/asm-blackfin/mach-bf527/BF527_cdef.h | 3 -
> include/asm-blackfin/mach-bf527/BF527_def.h | 1 -
> include/asm-blackfin/mach-bf527/anomaly.h | 63 ++++-
> include/asm-blackfin/mach-bf533/anomaly.h | 28 ++-
> .../mach-bf537/ADSP-EDN-BF534-extended_cdef.h | 3 -
> .../mach-bf537/ADSP-EDN-BF534-extended_def.h | 1 -
> include/asm-blackfin/mach-bf537/anomaly.h | 16 +-
> include/asm-blackfin/mach-bf548/BF541_cdef.h | 3 -
> include/asm-blackfin/mach-bf548/BF541_def.h | 1 -
> include/asm-blackfin/mach-bf548/BF542_cdef.h | 3 -
> include/asm-blackfin/mach-bf548/BF542_def.h | 1 -
> include/asm-blackfin/mach-bf548/BF544_cdef.h | 3 -
> include/asm-blackfin/mach-bf548/BF544_def.h | 1 -
> include/asm-blackfin/mach-bf548/BF547_cdef.h | 3 -
> include/asm-blackfin/mach-bf548/BF547_def.h | 1 -
> include/asm-blackfin/mach-bf548/BF548_cdef.h | 3 -
> include/asm-blackfin/mach-bf548/BF548_def.h | 1 -
> include/asm-blackfin/mach-bf548/BF549_cdef.h | 3 -
> include/asm-blackfin/mach-bf548/BF549_def.h | 1 -
> include/asm-blackfin/mach-bf548/anomaly.h | 78 +++++-
> include/asm-blackfin/mach-bf548/ports.h | 64 ++--
> include/asm-blackfin/mach-bf561/BF561_cdef.h | 18 +-
> include/asm-blackfin/mach-bf561/BF561_def.h | 2 -
> include/asm-blackfin/mach-bf561/anomaly.h | 9 +-
> .../asm-blackfin/mach-common/ADSP-EDN-core_cdef.h | 6 +
> .../asm-blackfin/mach-common/ADSP-EDN-core_def.h | 2 +
> .../mach-common/ADSP-EDN-extended_cdef.h | 9 +-
> .../mach-common/ADSP-EDN-extended_def.h | 1 -
> include/asm-blackfin/mem_init.h | 321 --------------------
> lib_blackfin/board.c | 14 +-
> lib_blackfin/cache.c | 35 +++
> 59 files changed, 427 insertions(+), 805 deletions(-)
> delete mode 100644 cpu/blackfin/flush.S
> delete mode 100644 include/asm-blackfin/mem_init.h
Applied, thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
The idea of male and female are universal constants.
-- Kirk, "Metamorphosis", stardate 3219.8
More information about the U-Boot
mailing list