November 2008 Archives by subject

• Messages sorted by: [ thread ] [ author ] [ date ]
• More info on this list...

Starting: Sat Nov 1 00:03:14 CET 2008
Ending: Sun Nov 30 17:53:24 CET 2008
Messages: 1201

• [U-Boot] *** PROBABLY SPAM *** Re: Question about ARM compiler optimization problem   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] 4xx warnings on cmd_elf.c   Niklaus Giger
• [U-Boot] =?us-ascii?Q?Re=3A=20=5BU=2DBoot=5D=20MAKEALL=20ml507=5Fflash=20return=20=22Not=20enough=20room=20for   Michal Simek
• [U-Boot] =?us-ascii?Q?Re=3A=20=5BU=2DBoot=5D=20MAKEALL=20ml507=5Fflash=20return=20=22Not=20enough=20room=20for   Benny Chen
• [U-Boot] ?Q?Re=3A=20=5BU=2DBoot=5D=20MAKEALL=20ml507=5Fflash=20return=20=22Not=20enough=20room=20for   Michal Simek
• [U-Boot] [ Ramdisk crc error ]   sean
• [U-Boot] [ Ramdisk crc error ]   Jerry Van Baren
• [U-Boot] [cfi-flash] Please pull git://www.denx.de/git/u-boot-cfi-flash.git   Wolfgang Denk
• [U-Boot] [cfi-flash] Please pull git://www.denx.de/git/u-boot-cfi-flash.git   Stefan Roese
• [U-Boot] [cfi-flash] Please pull git://www.denx.de/git/u-boot-cfi-flash.git   Wolfgang Denk
• [U-Boot] [patch 0/1] [Experimental] U-boot linking against libgcc   Mike Frysinger
• [U-Boot] [PATCH 0/2] 85xx: Support for XPedite5200   Wolfgang Denk
• [U-Boot] [PATCH 0/2] 85xx: Support for XPedite5200   Peter Tyser
• [U-Boot] [patch 0/2] Cleanup non-ascii characters and cleanup patch FAT on non standard sector size devices   Remy Bohmer
• [U-Boot] [PATCH 0/2] i386: Minor changes to allow clean creation of new board   Graeme Russ
• [U-Boot] [PATCH 0/3] Support for XPedite5370 and misc GPIO   Wolfgang Denk
• [U-Boot] [PATCH 0/4 v3] powerpc: 83xx: add support for the 8360 based kmeter1 board.   Heiko Schocher
• [U-Boot] [PATCH 0/4 v3] powerpc: 83xx: add support for the 8360 based kmeter1 board.   Kim Phillips
• [U-Boot] [PATCH 0/5 v2] powerpc: 83xx: add support for the 8360 based kmeter1 board.   Heiko Schocher
• [U-Boot] [PATCH 0/5] powerpc: 83xx: add support for the 8360 based kmeter1 board.   Heiko Schocher
• [U-Boot] [PATCH 0/6] Updates for atevk1100 support   Gunnar Rangoy
• [U-Boot] [PATCH 0/9] MPC8641 memory map changes/cleanup/36-bit   Becky Bruce
• [U-Boot] [PATCH 00/10] AVR32: RFC/preview - support for ATEVK1100 evaluation board   Wolfgang Denk
• [U-Boot] [PATCH 00/10] AVR32: RFC/preview - support for ATEVK1100 evaluation board   Haavard Skinnemoen
• [U-Boot] [PATCH 00/10] AVR32: RFC/preview - support for ATEVK1100 evaluation board   Haavard Skinnemoen
• [U-Boot] [PATCH 00/11 v4] Add UBI support   Stefan Roese
• [U-Boot] [PATCH 00/13 v5] ARM: OMAP3: Add support for some of TIs ARM-Cortex A8 OMAP3 boards   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 00/13 v5] ARM: OMAP3: Add support for some of TIs ARM-Cortex A8 OMAP3 boards   dirk.behme at googlemail.com
• [U-Boot] [PATCH 00/13 v5] ARM: OMAP3: Add support for some of TIs ARM-Cortex A8 OMAP3 boards   Dirk Behme
• [U-Boot] [PATCH 01/10] Consolidate MAX/MIN definitions   Wolfgang Denk
• [U-Boot] [PATCH 01/10] Consolidate MAX/MIN definitions   Haavard Skinnemoen
• [U-Boot] [PATCH 01/11 v4] MTD: Add MTD paritioning infrastructure   Stefan Roese
• [U-Boot] [PATCH 01/13 v5] ARM: OMAP3: Add pin mux, clock and cpu headers   dirk.behme at googlemail.com
• [U-Boot] [PATCH 01/13 v5] ARM: OMAP3: Add pin mux, clock and cpu headers   Wolfgang Denk
• [U-Boot] [PATCH 02/11 v4] UBI: Add basic UBI support to U-Boot (Part 1/8)   Stefan Roese
• [U-Boot] [PATCH 02/13 v5] ARM: OMAP3: Add i2c, memory, omap3 and function prototype headers   dirk.behme at googlemail.com
• [U-Boot] [PATCH 02/13 v5] ARM: OMAP3: Add i2c, memory, omap3 and function prototype headers   Wolfgang Denk
• [U-Boot] [PATCH 03/10] AVR32: Make cacheflush cpu-dependent   Wolfgang Denk
• [U-Boot] [PATCH 03/11 v4] UBI: Add basic UBI support to U-Boot (Part 2/8)   Stefan Roese
• [U-Boot] [PATCH 03/13 v5] ARM: OMAP3: Add ARM Cortex A8 common directory   dirk.behme at googlemail.com
• [U-Boot] [PATCH 03/13 v5] ARM: OMAP3: Add ARM Cortex A8 common directory   Wolfgang Denk
• [U-Boot] [PATCH 03/13 v5] ARM: OMAP3: Add ARM Cortex A8 common directory   Dirk Behme
• [U-Boot] [PATCH 04/10] AVR32: Move addrspace.h to arch-directory, and move some functions from io.h to addrspace.h   Wolfgang Denk
• [U-Boot] [PATCH 04/10] Eliminated arch-specific mmc header requirement   Haavard Skinnemoen
• [U-Boot] [PATCH 04/11 v4] UBI: Add basic UBI support to U-Boot (Part 3/8)   Stefan Roese
• [U-Boot] [PATCH 04/13 v5] ARM: OMAP3: Add lowlevel init and sys_info common files   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 04/13 v5] ARM: OMAP3: Add lowlevel init and sys_info common files   dirk.behme at googlemail.com
• [U-Boot] [PATCH 04/13 v5] ARM: OMAP3: Add lowlevel init and sys_info common files   Dirk Behme
• [U-Boot] [PATCH 05/10] AVR32: macb - Disable 100mbps if clock is slow   Wolfgang Denk
• [U-Boot] [PATCH 05/10] AVR32: macb - Disable 100mbps if clock is slow   Wolfgang Denk
• [U-Boot] [PATCH 05/11 v4] UBI: Add basic UBI support to U-Boot (Part 4/8)   Stefan Roese
• [U-Boot] [PATCH 05/13 v5] ARM: OMAP3: Add board, clock and interrupts common files   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 05/13 v5] ARM: OMAP3: Add board, clock and interrupts common files   dirk.behme at googlemail.com
• [U-Boot] [PATCH 05/13 v5] ARM: OMAP3: Add board, clock and interrupts common files   Wolfgang Denk
• [U-Boot] [PATCH 05/13 v5] ARM: OMAP3: Add board, clock and interrupts common files   Dirk Behme
• [U-Boot] [PATCH 06/10] Add MMC Framework   Liu Dave-R63238
• [U-Boot] [PATCH 06/10] Add MMC Framework   Haavard Skinnemoen
• [U-Boot] [PATCH 06/10] Add MMC Framework   Andy Fleming
• [U-Boot] [PATCH 06/10] Add MMC Framework   Haavard Skinnemoen
• [U-Boot] [PATCH 06/11 v4] UBI: Add basic UBI support to U-Boot (Part 5/8)   Stefan Roese
• [U-Boot] [PATCH 06/13 v5] ARM: OMAP3: Add memory and syslib common files   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 06/13 v5] ARM: OMAP3: Add memory and syslib common files   Wolfgang Denk
• [U-Boot] [PATCH 06/13 v5] ARM: OMAP3: Add memory and syslib common files   dirk.behme at googlemail.com
• [U-Boot] [PATCH 07/10] Add support for the Freescale eSDHC found on8379 and 8536 SoCs   Liu Dave-R63238
• [U-Boot] [PATCH 07/10] AVR32: Disable relocation of command table when on AT32UC3A for now   Wolfgang Denk
• [U-Boot] [PATCH 07/10] AVR32: Disable relocation of command table when on AT32UC3A for now   Haavard Skinnemoen
• [U-Boot] [PATCH 07/11 v4] UBI: Add basic UBI support to U-Boot (Part 6/8)   Stefan Roese
• [U-Boot] [PATCH 07/13 v5] ARM: OMAP3: Add NAND support   dirk.behme at googlemail.com
• [U-Boot] [PATCH 08/10] 83xx: Add eSDHC support on 8379 EMDS board   Liu Dave-R63238
• [U-Boot] [PATCH 08/11 v4] UBI: Add basic UBI support to U-Boot (Part 7/8)   Stefan Roese
• [U-Boot] [PATCH 08/13 v5] ARM: OMAP3: Add MMC support   dirk.behme at googlemail.com
• [U-Boot] [PATCH 08/13 v5] ARM: OMAP3: Add MMC support   Kyungmin Park
• [U-Boot] [PATCH 08/13 v5] ARM: OMAP3: Add MMC support   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 09/10] 85xx: Add eSDHC support for 8536 DS   Liu Dave-R63238
• [U-Boot] [PATCH 09/10] AVR32: CPU support for AT32UC3A0xxx CPUs   Wolfgang Denk
• [U-Boot] [PATCH 09/10] AVR32: CPU support for AT32UC3A0xxx CPUs   Haavard Skinnemoen
• [U-Boot] [PATCH 09/10] AVR32: CPU support for AT32UC3A0xxx CPUs   Haavard Skinnemoen
• [U-Boot] [PATCH 09/11 v4] UBI: Add basic UBI support to U-Boot (Part 8/8)   Stefan Roese
• [U-Boot] [PATCH 09/13 v5] ARM: OMAP3: Add I2C support   dirk.behme at googlemail.com
• [U-Boot] [PATCH 09/13 v5] ARM: OMAP3: Add I2C support   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 09/13 v5] ARM: OMAP3: Add I2C support   Dirk Behme
• [U-Boot] [PATCH 09/13 v5] ARM: OMAP3: Add I2C support   Wolfgang Denk
• [U-Boot] [PATCH 1/1] ARM DaVinci: Add common peripherals and modules enable functions.   Hugo Villeneuve
• [PATCH 1/1] ARM: update asm implementation and remove -lgcc from arm   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 1/1] common/Makefile: create others group for non core, environment and command files   Wolfgang Denk
• [U-Boot] [PATCH 1/1] microblaze: Remove XUPV2P board   monstr at monstr.eu
• [U-Boot] [PATCH 1/1] MIMC200: tidy GCLK init code   Mark Jackson
• [U-Boot] [PATCH 1/1] ppc4xx: ml300 remove Xilinx BSP from ml300 folder   monstr at monstr.eu
• [U-Boot] [PATCH 1/1] ppc4xx: ml300 remove Xilinx BSP from ml300 folder   Stefan Roese
• [U-Boot] [patch 1/1] Remove linking to libgcc while compiling U-boot   Scott Wood
• [U-Boot] [patch 1/1] Remove linking to libgcc while compiling U-boot   Wolfgang Denk
• [U-Boot] [patch 1/1] Remove linking to libgcc while compiling U-boot   Remy Bohmer
• [U-Boot] [patch 1/1] Remove linking to libgcc while compiling U-boot   Wolfgang Denk
• [U-Boot] [patch 1/1] Remove linking to libgcc while compiling U-boot   Remy Bohmer
• [U-Boot] [patch 1/1] Remove linking to libgcc while compiling U-boot   Wolfgang Denk
• [U-Boot] [PATCH 1/1] Setup extra MIMC200 chip selects   Mark Jackson
• [U-Boot] [PATCH 1/2 V3] IOMUX: Add console multiplexing support.   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 1/2 V3] IOMUX: Add console multiplexing support.   Gary Jennejohn
• [U-Boot] [PATCH 1/2 V3] IOMUX: Add console multiplexing support.   Gary Jennejohn
• [U-Boot] [PATCH 1/2] 85xx: Fix relocation of CCSRBAR   Kumar Gala
• [U-Boot] [PATCH 1/2] bootm: fix BOOTM_STATE_FDT subcommand usage   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 1/2] bootm: fix BOOTM_STATE_FDT subcommand usage   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 1/2] bootm: fix BOOTM_STATE_FDT subcommand usage   Wolfgang Denk
• [U-Boot] [PATCH 1/2] bootm: fix BOOTM_STATE_FDT subcommand usage   Wolfgang Denk
• [U-Boot] [PATCH 1/2] bootm: fix BOOTM_STATE_FDT subcommand usage   Kumar Gala
• [U-Boot] [PATCH 1/2] bootm: fix BOOTM_STATE_FDT subcommand usage   Wolfgang Denk
• [U-Boot] [PATCH 1/2] Fixed build error due to #define of _LINUX_STRING_H_ in 82559_eeprom.c   Graeme Russ
• [U-Boot] [patch 1/2] Remove non-ascii characters from fat code   Remy Bohmer
• [U-Boot] [PATCH 1/3] Add support for PCA953x I2C gpio devices   Wolfgang Denk
• [U-Boot] [PATCH 1/3] Add support for PCA953x I2C gpio devices   Peter Tyser
• [U-Boot] [PATCH 1/3] Add support for PCA953x I2C gpio devices   Wolfgang Denk
• [U-Boot] [PATCH 1/3] cfi-mtd: Add cfi-mtd driver.   Piotr Ziecik
• [U-Boot] [PATCH 1/3] cfi-mtd: Add cfi-mtd driver.   Stefan Roese
• [U-Boot] [PATCH 1/3] Changed PPC4xx EMAC driver to require CONFIG_PPC4xx_EMAC   Ben Warren
• [U-Boot] [PATCH 1/3] Changed PPC4xx EMAC driver to require CONFIG_PPC4xx_EMAC   Stefan Roese
• [U-Boot] [PATCH 1/3] Introduce addr_map library   Kumar Gala
• [U-Boot] [PATCH 1/3] Introduce addr_map library   Scott Wood
• [U-Boot] [PATCH 1/3] Introduce virt_to_phys()   Kumar Gala
• [U-Boot] [PATCH 1/3] ppc4xx: Remove unused code from PCI405 code   matthias.fuchs at esd-electronics.com
• [U-Boot] [PATCH 1/3] ppc4xx: Remove unused code from PCI405 code   Stefan Roese
• [U-Boot] [PATCH 1/3][ppc4xx] Changed PPC4xx EMAC driver to require CONFIG_PPC4xx_EMAC   Stefan Roese
• [U-Boot] [PATCH 1/3][ppc4xx] Changed PPC4xx EMAC driver to require CONFIG_PPC4xx_EMAC   Ben Warren
• [U-Boot] [PATCH 1/4 v3] powerpc: net: support for the SMSC LAN8700 PHY   Ben Warren
• [U-Boot] [PATCH 1/4 v3] powerpc: net: support for the SMSC LAN8700 PHY   Heiko Schocher
• [U-Boot] [PATCH 1/4] microblaze: Set up relocation is done   monstr at seznam.cz
• [U-Boot] [PATCH 1/4] New Board support: Makefile MAKEALL, etc   Ron Madrid
• [U-Boot] [PATCH 1/4] New Board support: Makefile MAKEALL, etc   Wolfgang Denk
• [U-Boot] [PATCH 1/4] New Board support: Makefile MAKEALL, etc   Ron Madrid
• [U-Boot] [PATCH 1/4]v2: Document CONFIG_SYS parameters for vxworks   Niklaus Giger
• [U-Boot] [PATCH 1/5 v2] powerpc: 83xx: support for the SMSC LAN8700 PHY   Heiko Schocher
• [U-Boot] [PATCH 1/5 v2] powerpc: 83xx: support for the SMSC LAN8700 PHY   Kim Phillips
• [U-Boot] [PATCH 1/5] fsl-ddr: update the bit mask for DDR3 controller   Dave Liu
• [U-Boot] [PATCH 1/5] powerpc: 83xx: support for the SMSC LAN8700 PHY   Heiko Schocher
• [U-Boot] [PATCH 1/6] AVR32: Make GPIO implmentation cpu dependent   Gunnar Rangoy
• [U-Boot] [PATCH 1/6] jffs2: fix searching for latest version in jffs2_1pass_list_inodes()   Ilya Yanok
• [U-Boot] [PATCH 1/9] mpc8641: Remove extra "0" from BR2 define   Becky Bruce
• [U-Boot] [PATCH 10/10] AVR32: Board support for ATEVK1100   Wolfgang Denk
• [U-Boot] [PATCH 10/11 v4] UBI: Add UBI command support   Stefan Roese
• [U-Boot] [PATCH 10/13 v5] ARM: OMAP3: Add BeagleBoard   dirk.behme at googlemail.com
• [U-Boot] [PATCH 10/13 v5] ARM: OMAP3: Add BeagleBoard   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 11/11 v4] ARM: Add Apollon UBI support   Stefan Roese
• [U-Boot] [PATCH 11/11 v4] ARM: Add Apollon UBI support   Magnus Lilja
• [U-Boot] [PATCH 11/11 v4] ARM: Add Apollon UBI support   Kyungmin Park
• [U-Boot] [PATCH 11/13 v5] ARM: OMAP3: Add EVM board   dirk.behme at googlemail.com
• [U-Boot] [PATCH 11/13 v5] ARM: OMAP3: Add EVM board   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 11/13 v5] ARM: OMAP3: Add EVM board   Wolfgang Denk
• [U-Boot] [PATCH 11/13 v5] ARM: OMAP3: Add EVM board   Dirk Behme
• [U-Boot] [PATCH 12/13 v5] ARM: OMAP3: Add Overo board   dirk.behme at googlemail.com
• [U-Boot] [PATCH 12/13 v5] ARM: OMAP3: Add Overo board   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 12/13 v5] ARM: OMAP3: Add Overo board   Wolfgang Denk
• [U-Boot] [PATCH 13/13 v5] ARM: OMAP3: Add Beagle, EVM and Overo configuration and README   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 13/13 v5] ARM: OMAP3: Add Beagle, EVM and Overo configuration and README   dirk.behme at googlemail.com
• [U-Boot] [PATCH 2/2] 85xx: init gd as early as possible   Kumar Gala
• [U-Boot] [patch 2/2] Cleanup patch Fat on non standard sector sizedevices   Igor Luri
• [U-Boot] [patch 2/2] Cleanup patch Fat on non standard sector size devices   Remy Bohmer
• [U-Boot] [PATCH 2/2] fit: Fix little endian target support   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 2/2] fit: Fix little endian target support   Wolfgang Denk
• [U-Boot] [PATCH 2/2] fit: Fix little endian target support   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 2/2] fit: Fix little endian target support   Wolfgang Denk
• [U-Boot] [PATCH 2/2] fit: Fix little endian target support   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 2/2] Minor changes to allow clean creation of new i386/sc520 boards   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 2/2] Minor changes to allow clean creation of new i386/sc520 boards   Graeme Russ
• [U-Boot] [PATCH 2/2] XPedite5200 board support   Wolfgang Denk
• [U-Boot] [PATCH 2/2] XPedite5200 board support   Peter Tyser
• [U-Boot] [PATCH 2/3] 85xx: Add support to populate addr map based on TLB settings   Kumar Gala
• [U-Boot] [PATCH 2/3] Add support for Maxim's DS4510 I2C device   Wolfgang Denk
• [U-Boot] [PATCH 2/3] Add support for Maxim's DS4510 I2C device   Peter Tyser
• [U-Boot] [PATCH 2/3] Add support for Maxim's DS4510 I2C device   Wolfgang Denk
• [U-Boot] [PATCH 2/3] FSL: Moved BR_PHYS_ADDR for localbus to common header   Kumar Gala
• [U-Boot] [PATCH 2/3] mtd: Remove a printf() from add_mtd_device().   Stefan Roese
• [U-Boot] [PATCH 2/3] mtd: Remove a printf() from add_mtd_device().   Piotr Ziecik
• [U-Boot] [PATCH 2/3] ppc4xx: Use correct io accessors for PCI405   matthias.fuchs at esd-electronics.com
• [U-Boot] [PATCH 2/3][ppc4xx] Moved PPC4xx EMAC driver to drivers/net   Ben Warren
• [U-Boot] [PATCH 2/4 v3] powerpc: 83xx: add support for the kmeter1 board   Heiko Schocher
• [U-Boot] [PATCH 2/4] FDT: Enable microblaze cpu in image.c   monstr at seznam.cz
• [U-Boot] [PATCH 2/4] FDT: Enable microblaze cpu in image.c   Wolfgang Denk
• [U-Boot] [PATCH 2/4] FDT: Enable microblaze cpu in image.c   Michal Simek
• [U-Boot] [PATCH 2/4] FDT: Enable microblaze cpu in image.c   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 2/4] FDT: Enable microblaze cpu in image.c   Michal Simek
• [U-Boot] [PATCH 2/4][RFC] Add ehci core functionality   Wolfgang Denk
• [U-Boot] [PATCH 2/4][RFC] Add ehci core functionality   michael
• [U-Boot] [PATCH 2/4]v2: Add vxworks.h to handle CONFIG_SYS_VXWORKS parameters   Niklaus Giger
• [U-Boot] [PATCH 2/5 v2] powerpc: 83xx: add missing TIMING_CFG1_CASLAT_* defines   Heiko Schocher
• [U-Boot] [PATCH 2/5 v2] powerpc: 83xx: add missing TIMING_CFG1_CASLAT_* defines   Kim Phillips
• [U-Boot] [PATCH 2/5] fsl-ddr: clean up the ddr code for DDR3 controller   Dave Liu
• [U-Boot] [PATCH 2/5] powerpc: 83xx: add missing TIMING_CFG1_CASLAT_* defines   Heiko Schocher
• [U-Boot] [PATCH 2/6] AT572D940HF-EB Support v2 (cpu folder)   Antonio R. Costa
• [U-Boot] [PATCH 2/6] AT572D940HF-EB Support v2 (cpu folder)   Haavard Skinnemoen
• [U-Boot] [PATCH 2/6] AVR32: Support for external SRAM on at32uc3   Gunnar Rangoy
• [U-Boot] [PATCH 2/6] jffs2: add sector_size field to part_info structure   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 2/6] jffs2: add sector_size field to part_info structure   Ilya Yanok
• [U-Boot] [PATCH 2/6] jffs2: add sector_size field to part_info structure   Ben Warren
• [U-Boot] [PATCH 2/9] mpc86xx: Move setup_bats into cpu_init_f   Becky Bruce
• [U-Boot] [PATCH 2a/2] Fixed path to sc520 SSI include file   Graeme Russ
• [U-Boot] [PATCH 2b/2] Moved sc520 PCI definitions to stand-alone file   Graeme Russ
• [U-Boot] [PATCH 3/3] NAND FSL elbc: Use virt_to_phys to determine which bank is in use   Kumar Gala
• [U-Boot] [PATCH 3/3] NAND FSL elbc: Use virt_to_phys to determine which bank is in use   Kumar Gala
• [U-Boot] [PATCH 3/3] NAND FSL elbc: Use virt_to_phys to determine which bank is in use   Scott Wood
• [U-Boot] [PATCH 3/3] ppc4xx: Remove unused features   matthias.fuchs at esd-electronics.com
• [U-Boot] [PATCH 3/3] ppc: Use addrmap in virt_to_phys and map_physmem.   Kumar Gala
• [U-Boot] [PATCH 3/3] ppc: Use addrmap in virt_to_phys and map_physmem.   Scott Wood
• [U-Boot] [PATCH 3/3] ubi: Add proof-of-concept CFI flash support   Piotr Ziecik
• [U-Boot] [PATCH 3/3] ubi: Add proof-of-concept CFI flash support   Stefan Roese
• [U-Boot] [PATCH 3/3] XPedite5370 board support   Wolfgang Denk
• [U-Boot] [PATCH 3/3] XPedite5370 board support   Peter Tyser
• [U-Boot] [PATCH 3/3] XPedite5370 board support   Wolfgang Denk
• [U-Boot] [PATCH 3/3] XPedite5370 board support   Peter Tyser
• [U-Boot] [PATCH 3/3] XPedite5370 board support   Wolfgang Denk
• [U-Boot] [PATCH 3/3] XPedite5370 board support   Jon Loeliger
• [U-Boot] [PATCH 3/3] XPedite5370 board support   Peter Tyser
• [U-Boot] [PATCH 3/3][ppc4xx] Moved initialization of PPC4xx EMAC to cpu_eth_init()   Ben Warren
• [U-Boot] [PATCH 3/4 v3] powerpc: keymile: Add a check for the PIGGY debug board   Heiko Schocher
• [U-Boot] [PATCH 3/4 v3] powerpc: keymile: Add a check for the PIGGY debug board   Gary Jennejohn
• [U-Boot] [PATCH 3/4 v4] powerpc: keymile: Add a check for the PIGGY debug board   Heiko Schocher
• [U-Boot] [PATCH 3/4 v4] powerpc: keymile: Add a check for the PIGGY debug board   Ben Warren
• [U-Boot] [PATCH 3/4] microblaze: Fix ml401 uart16550 setting   monstr at seznam.cz
• [U-Boot] [PATCH 3/4]v2: Cleanup bootvx and handle new CONFIG_SYS_VXWORKS parameters   Niklaus Giger
• [U-Boot] [PATCH 3/5 v2] powerpc: 83xx: add support for the kmeter1 board   Heiko Schocher
• [U-Boot] [PATCH 3/5 v2] powerpc: 83xx: add support for the kmeter1 board   Kim Phillips
• [U-Boot] [PATCH 3/5] fsl-ddr: make the self refresh idle threshold configurable   Dave Liu
• [U-Boot] [PATCH 3/5] powerpc: 83xx: add support for the kmeter1 board   Heiko Schocher
• [U-Boot] [PATCH 3/6] AVR32: Use SRAM as main memory on the atevk1100 board   Gunnar Rangoy
• [U-Boot] [PATCH 3/6] jffs2: rewrite jffs2 scanning code based on Linux one   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 3/6] jffs2: rewrite jffs2 scanning code based on Linux one   Ilya Yanok
• [U-Boot] [PATCH 3/6] jffs2: rewrite jffs2 scanning code based on Linux one   Ilya Yanok
• [U-Boot] [PATCH 3/9] mpc8641: only define CONFIG_ENV_SIZE once   Becky Bruce
• [U-Boot] [PATCH 4/4 V2] add Siemens SX1 Machine support   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 4/4 V2] add Siemens SX1 Machine support   Wolfgang Denk
• [U-Boot] [PATCH 4/4 V2] add Siemens SX1 Machine support   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 4/4 v3] powerpc, keymile boards: extract identical config options   Heiko Schocher
• [U-Boot] [PATCH 4/4] microblaze: ml401, xupv2p, suzaku - add CONFIG_SYS_BOOTMAPSZ and   monstr at seznam.cz
• [U-Boot] [PATCH 4/4]v2: Use new CONFIG_SYS_VXWORKS parameters for Netstal boards   Niklaus Giger
• [U-Boot] [PATCH 4/5 v2] powerpc: keymile: Add a check for the PIGGY debug board   Heiko Schocher
• [U-Boot] [PATCH 4/5 v2] powerpc: keymile: Add a check for the PIGGY debug board   Ben Warren
• [U-Boot] [PATCH 4/5] fsl-ddr: use the 1T timing as default configuration   Dave Liu
• [U-Boot] [PATCH 4/5] powerpc: keymile: Add a check for the PIGGY debug board   Heiko Schocher
• [U-Boot] [PATCH 4/5] powerpc: keymile: Add a check for the PIGGY debug board   Ben Warren
• [U-Boot] [PATCH 4/5] powerpc: keymile: Add a check for the PIGGY debug board   Heiko Schocher
• [U-Boot] [PATCH 4/5] powerpc: keymile: Add a check for the PIGGY debug board   Ben Warren
• [U-Boot] [PATCH 4/5] powerpc: keymile: Add a check for the PIGGY debug board   Heiko Schocher
• [U-Boot] [PATCH 4/5] powerpc: keymile: Add a check for the PIGGY debug board   Gary Jennejohn
• [U-Boot] [PATCH 4/5] powerpc: keymile: Add a check for the PIGGY debug board   Heiko Schocher
• [U-Boot] [PATCH 4/5] powerpc: keymile: Add a check for the PIGGY debug board   Ben Warren
• [U-Boot] [PATCH 4/5] powerpc: keymile: Add a check for the PIGGY debug board   Gary Jennejohn
• [U-Boot] [PATCH 4/6] AVR32: Enable relocation of code for at32uc3   Gunnar Rangoy
• [U-Boot] [PATCH 4/6] jffs2: add buffer to cache flash accesses   Ilya Yanok
• [U-Boot] [PATCH 4/9] mpc8641: Drop imaginary second flash bank, map 8MB   Becky Bruce
• [U-Boot] [PATCH 5/5 v2] powerpc, keymile boards: extract identical config options   Heiko Schocher
• [U-Boot] [PATCH 5/5] 85xx: enable the auto self refresh for wake up ARP   Kumar Gala
• [U-Boot] [PATCH 5/5] 85xx: enable the auto self refresh for wake up ARP   Liu Dave
• [U-Boot] [PATCH 5/5] 85xx: enable the auto self refresh for wake up ARP   Kumar Gala
• [U-Boot] [PATCH 5/5] 85xx: enable the auto self refresh for wake up ARP   Dave Liu
• [U-Boot] [PATCH 5/5] powerpc, keymile boards: extract identical config options   Heiko Schocher
• [U-Boot] [PATCH 5/6] AVR32: Support for writing to internal flash on at32uc3   Gunnar Rangoy
• [U-Boot] [PATCH 5/6] jffs2: summary support   Ilya Yanok
• [U-Boot] [PATCH 5/9] mpc8641: make DIAG_ADDR == FLASH_BASE   Becky Bruce
• [U-Boot] [PATCH 6/6] AVR32: Set boot parameters for atevk1100   Gunnar Rangoy
• [U-Boot] [PATCH 6/6] jffs2: cache data_crc results   Ilya Yanok
• [U-Boot] [PATCH 6/9] mpc86xx: Use SRR0/1/rfi to enable address translation, not blr   Becky Bruce
• [U-Boot] [PATCH 7/9] mpc86xx: Change early FLASH mapping to 1M at CONFIG_MONITOR_BASE_EARLY   Becky Bruce
• [U-Boot] [PATCH 8/9 V2] mpc8641: Change 32-bit memory map   Becky Bruce
• [U-Boot] [PATCH 8/9] mpc8641: Change 32-bit memory map   Becky Bruce
• [U-Boot] [PATCH 8/9] mpc8641: Change 32-bit memory map   Scott Wood
• [U-Boot] [PATCH 8/9] mpc8641: Change 32-bit memory map   Jon Loeliger
• [U-Boot] [PATCH 8/9] mpc8641: Change 32-bit memory map   Becky Bruce
• [U-Boot] [PATCH 8/9] mpc8641: Change 32-bit memory map   Becky Bruce
• [U-Boot] [PATCH 8/9] mpc8641: Change 32-bit memory map   Scott Wood
• [U-Boot] [PATCH 8/9] mpc8641: Change 32-bit memory map   Becky Bruce
• [U-Boot] [PATCH 8/9] mpc8641: Change 32-bit memory map   Scott Wood
• [U-Boot] [PATCH 8/9] mpc8641: Change 32-bit memory map   Jon Loeliger
• [U-Boot] [PATCH 8/9] mpc8641: Change 32-bit memory map   Becky Bruce
• [U-Boot] [PATCH 8/9] mpc8641: Change 32-bit memory map   Becky Bruce
• [U-Boot] [PATCH 9/9 V2] mpc8641: Support 36-bit physical addressing   Becky Bruce
• [U-Boot] [PATCH 9/9] mpc8641: Support 36-bit physical addressing   Becky Bruce
• [U-Boot] [PATCH 9/9] mpc8641: Support 36-bit physical addressing   Kumar Gala
• [U-Boot] [PATCH RFC] at91sam9/at91cap: move common initialisation to cpu   Stelian Pop
• [U-Boot] [PATCH RFC] at91sam9/at91cap: move common initialisation to cpu   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH RFC] at91sam9/at91cap: move common initialisation to cpu   Stelian Pop
• [U-Boot] [PATCH RFC] at91sam9/at91cap: move common initialisation to cpu   Remy Bohmer
• [U-Boot] [PATCH RFC] at91sam9/at91cap: move common initialisation to cpu   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH v2 0/2] 85xx: Support for XPedite5200   Peter Tyser
• [U-Boot] [PATCH v2 0/3] Support for XPedite5370 and misc GPIO   Wolfgang Denk
• [U-Boot] [PATCH v2 1/2] 85xx: Add PORDEVSR_PCI1 define   Peter Tyser
• [U-Boot] [PATCH v2 1/3] Changed PPC4xx EMAC driver to require CONFIG_PPC4xx_EMAC   Ben Warren
• [U-Boot] [PATCH v2 1/3] Introduce addr_map library   Kumar Gala
• [U-Boot] [PATCH v2 2/2] XPedite5200 board support   Peter Tyser
• [U-Boot] [PATCH v2 2/3] 85xx: Add support to populate addr map based on TLB settings   Kumar Gala
• [U-Boot] [PATCH v2 2/3] Moved PPC4xx EMAC driver to drivers/net   Ben Warren
• [U-Boot] [PATCH v2 3/3] Moved initialization of PPC4xx EMAC to cpu_eth_init()   Ben Warren
• [U-Boot] [PATCH v2 3/3] ppc: Use addrmap in virt_to_phys and map_physmem.   Kumar Gala
• [U-Boot] [PATCH v2 3/3] XPedite5370 board support   Wolfgang Denk
• [U-Boot] [PATCH v2 3/3] XPedite5370 board support   Peter Tyser
• [U-Boot] [PATCH v2 3/3] XPedite5370 board support   Wolfgang Denk
• [U-Boot] [PATCH v2 5/9] ColdFire: Add mii driver in drivers/net   Ben Warren
• [U-Boot] [PATCH v2 5/9] ColdFire: Add mii driver in drivers/net   Ben Warren
• [U-Boot] [PATCH v2] ARM: OMAP: Convert IO macros   dirk.behme at googlemail.com
• [U-Boot] [PATCH v2] cfi_flash: Make all flash access functions weak   Stefan Roese
• [U-Boot] [PATCH v2] cfi_flash: Make all flash access functions weak   Haavard Skinnemoen
• [U-Boot] [PATCH V2] cmd_bdinfo: move implementation to arch instead of common   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH V2] cmd_bdinfo: move implementation to arch instead of common   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH V2] cmd_bdinfo: move implementation to arch instead of common   Mike Frysinger
• [U-Boot] [PATCH V2] cmd_bdinfo: move implementation to arch instead of common   Mike Frysinger
• [U-Boot] [PATCH V2] cmd_bdinfo: move implementation to arch instead of common   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH v2] cmd_elf: CONFIG_ELF_SIMPLE_LOAD: load ELFs according to PHDRs   Mike Frysinger
• [U-Boot] [PATCH v2] Delete unused definitions for SDR0_DDRCFG from ppc4xx.h   Stefan Roese
• [U-Boot] [PATCH v2] Delete unused definitions for SDR0_DDRCFG from ppc4xx.h   Steven A. Falco
• [U-Boot] [PATCH V2] Fix FIT and fdt blob support to have CONFIG_OF_LIBFDT and CONFIG_FIT independant   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH V2] Fix FIT and fdt blob support to have CONFIG_OF_LIBFDT and CONFIG_FIT independant   Wolfgang Denk
• [U-Boot] [PATCH V2] flash: Export flash_sector_size() function.   Piotr Ziecik
• [U-Boot] [PATCH V2] flash: Export flash_sector_size() function.   Stefan Roese
• [U-Boot] [PATCH v2] Freescale NFC NAND driver   John Rigby
• [U-Boot] [PATCH v2] Freescale NFC NAND driver   Magnus Lilja
• [U-Boot] [PATCH v2] Freescale NFC NAND driver   John Rigby
• [U-Boot] [PATCH V2] Initial support for Nomadik 8815 development board   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH V2] Initial support for Nomadik 8815 development board   Alessandro Rubini
• [U-Boot] [PATCH v2] mgcoge make ether_scc.c work with CONFIG_NET_MULTI   Gary Jennejohn
• [U-Boot] [PATCH v2] mpc83xx: New board support SIMPC8313   Ron Madrid
• [U-Boot] [PATCH v2] mpc83xx: New board support SIMPC8313   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH v2] mpc83xx: New board support SIMPC8313   Ron Madrid
• [U-Boot] [PATCH v2] nand: Fix cache and memory inconsistent issue   Dave Liu
• [U-Boot] [PATCH v2] NAND: fixed bugs in nand_[read, write]_skip_bad()   Valeriy Glushkov
• [U-Boot] [PATCH v2] NAND: fixed bugs in nand_[read, write]_skip_bad()   Scott Wood
• [U-Boot] [PATCH v2] OneNAND: Bad block aware read/write command support   Stefan Roese
• [U-Boot] [PATCH v2] OneNAND: Bad block aware read/write command support   Scott Wood
• [U-Boot] [PATCH v2] OneNAND: Bad block aware read/write command support   Stefan Roese
• [U-Boot] [PATCH V2] powerpc 86xx: Handle CCSR relocation earlier   Jon Loeliger
• [U-Boot] [PATCH V2] powerpc 86xx: Handle CCSR relocation earlier   Becky Bruce
• [U-Boot] [PATCH V2] powerpc: change 86xx SMP boot method   Becky Bruce
• [U-Boot] [PATCH v2] ppc4xx: Added ppc4xx-isram.h for internal SRAM and L2 cache DCRs   Stefan Roese
• [U-Boot] [PATCH v2] ppc4xx: Added ppc4xx-isram.h for internal SRAM and L2 cache DCRs   Dave Mitchell
• [U-Boot] [PATCH v2] ppc4xx: Changed 460EX/GT OCM TLB and internal SRAM initialization   Stefan Roese
• [U-Boot] [PATCH v2] ppc4xx: Changed 460EX/GT OCM TLB and internal SRAM initialization   Dave Mitchell
• [U-Boot] [PATCH v2] sh: Update sh timer function   Nobuhiro Iwamatsu
• [U-Boot] [patch V2] U-Boot Firetux board support   Juergen Schoew
• [U-Boot] [patch V2] U-Boot Firetux board support   Ben Warren
• [U-Boot] [patch V2] U-Boot Firetux board support   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [patch V2] U-Boot Firetux board support   Jürgen Schöw
• [U-Boot] [patch V2] U-Boot Firetux board support   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH v3 0/3]Support for XPedite5370 and misc GPIO   Peter Tyser
• [U-Boot] [PATCH v3 1/3] Add support for PCA953x I2C gpio devices   Peter Tyser
• [U-Boot] [PATCH v3 1/3] Introduce addr_map library   Kumar Gala
• [U-Boot] [PATCH v3 2/3] 85xx: Add support to populate addr map based on TLB settings   Kumar Gala
• [U-Boot] [PATCH v3 2/3] Add support for Maxim's DS4510 I2C device   Peter Tyser
• [U-Boot] [PATCH v3 3/3] ppc: Use addrmap in virt_to_phys and map_physmem.   Kumar Gala
• [U-Boot] [PATCH v3 3/3] XPedite5370 board support   Peter Tyser
• [U-Boot] [PATCH V3] Fix FIT and fdt blob support to have CONFIG_OF_LIBFDT and CONFIG_FIT independant   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH v3] Freescale NFC NAND driver   John Rigby
• [U-Boot] [PATCH v3] Freescale NFC NAND driver   Fabio Estevam
• [U-Boot] [PATCH v3] Freescale NFC NAND driver   John Rigby
• [U-Boot] [PATCH v3] Freescale NFC NAND driver   Scott Wood
• [U-Boot] [PATCH V3] Initial support for Nomadik 8815 development   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH V3] Initial support for Nomadik 8815 development   Alessandro Rubini
• [U-Boot] [PATCH v3] mgcoge make ether_scc.c work with CONFIG_NET_MULTI   Gary Jennejohn
• [U-Boot] [PATCH v3] mgcoge make ether_scc.c work with CONFIG_NET_MULTI   Ben Warren
• [U-Boot] [PATCH v3] mpc83xx: New board support SIMPC8313   Ron Madrid
• [U-Boot] [PATCH v3] mpc83xx: New board support SIMPC8313   Kim Phillips
• [U-Boot] [PATCH v3] mpc83xx: New board support SIMPC8313   Ron Madrid
• [U-Boot] [PATCH v3] mpc83xx: New board support SIMPC8313   Ron Madrid
• [U-Boot] [PATCH v3] mpc83xx: New board support SIMPC8313   Kim Phillips
• [U-Boot] [PATCH v3] mpc83xx: New board support SIMPC8313   Scott Wood
• [U-Boot] [PATCH v3] mpc83xx: New board support SIMPC8313   Wolfgang Denk
• [U-Boot] [PATCH v3] OneNAND: Bad block aware read/write command support   Stefan Roese
• [U-Boot] [PATCH v3] OneNAND: Bad block aware read/write command support   Scott Wood
• [U-Boot] [PATCH v3] OneNAND: Bad block aware read/write command support   Stefan Roese
• [U-Boot] [PATCH v4] Update U-Boot's build timestamp on every compile   Peter Tyser
• [U-Boot] [PATCH v4] Update U-Boot's build timestamp on every compile   Trent Piepho
• [U-Boot] [PATCH v5] Update U-Boot's build timestamp on every compile   Peter Tyser
• [U-Boot] [PATCH-OMAP3 0/2] OMAP3: Add support for OMAP3 based Pandora board   Grazvydas Ignotas
• [U-Boot] [PATCH-OMAP3 0/2] OMAP3: Add support for OMAP3 based Pandora board   Dirk Behme
• [U-Boot] [PATCH-OMAP3 1/2] OMAP3: Add Pandora board files   Grazvydas Ignotas
• [U-Boot] [PATCH-OMAP3 1/2] OMAP3: Convert register access to structure style, part #1   Dirk Behme
• [U-Boot] [PATCH-OMAP3 2/2] OMAP3: Add Pandora configuration   Grazvydas Ignotas
• [U-Boot] [PATCH-OMAP3 2/2] OMAP3: Convert register access to structure style, part #2   Dirk Behme
• [U-Boot] [PATCH-OMAP3 v2] OMAP3: Add missing GPL headers   dirk.behme at googlemail.com
• [U-Boot] [PATCH-OMAP3 v2] OMAP3: Add missing GPL headers   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH-OMAP3 v2] OMAP3: Fix error in gpmc_init   dirk.behme at googlemail.com
• [U-Boot] [PATCH-OMAP3 v2] OMAP3: Fix error in gpmc_init   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH-OMAP3 v2] OMAP3: Fix gpmc_cs_base pointer math in NAND   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH-OMAP3 v2] OMAP3: Fix gpmc_cs_base pointer math in NAND   dirk.behme at googlemail.com
• [U-Boot] [PATCH-OMAP3 v2] OMAP3: Fix multiline comment style   dirk.behme at googlemail.com
• [U-Boot] [PATCH-OMAP3 v2] OMAP3: Fix multiline comment style   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH-OMAP3 v2] OMAP3: Fix typo and cp_delay   dirk.behme at googlemail.com
• [U-Boot] [PATCH-OMAP3 v2] OMAP3: Fix typo and cp_delay   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH-OMAP3 v2] OMAP3: Plain numbers don't need parens   dirk.behme at googlemail.com
• [U-Boot] [PATCH-OMAP3 v2] OMAP3: Remove BITx magic   dirk.behme at googlemail.com
• [U-Boot] [PATCH-OMAP3 v2] OMAP3: Remove BITx magic   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH-OMAP3 v2] OMAP3: Update ARM's if then else logic in examples Makefile   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH-OMAP3 v2] OMAP3: Update ARM's if then else logic in examples Makefile   dirk.behme at googlemail.com
• [U-Boot] [PATCH-OMAP3] OMAP3: Add missing GPL headers   dirk.behme at googlemail.com
• [U-Boot] [PATCH-OMAP3] OMAP3: Clean up board files   dirk.behme at googlemail.com
• [U-Boot] [PATCH-OMAP3] OMAP3: Clean up board files   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH-OMAP3] OMAP3: Clean up coding style of board config files   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH-OMAP3] OMAP3: Clean up coding style of board config files   dirk.behme at googlemail.com
• [U-Boot] [PATCH-OMAP3] OMAP3: Clean up EVM board file   dirk.behme at googlemail.com
• [U-Boot] [PATCH-OMAP3] OMAP3: Clean up EVM board file   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH-OMAP3] OMAP3: Clean up EVM board file   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH-OMAP3] OMAP3: Clean up system information   dirk.behme at googlemail.com
• [U-Boot] [PATCH-OMAP3] OMAP3: Clean up system information   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH-OMAP3] OMAP3: Convert readl/writel and replace hardcoded values   Dirk Behme
• [U-Boot] [PATCH-OMAP3] OMAP3: Convert readl/writel and replace hardcoded values   Wolfgang Denk
• [U-Boot] [PATCH-OMAP3] OMAP3: Convert readl/writel and replace hardcoded values   Wolfgang Denk
• [U-Boot] [PATCH-OMAP3] OMAP3: Convert readl/writel and replace hardcoded values   Graeme Russ
• [U-Boot] [PATCH-OMAP3] OMAP3: Convert readl/writel and replace hardcoded values   Wolfgang Denk
• [U-Boot] [PATCH-OMAP3] OMAP3: Convert readl/writel and replace hardcoded values   Graeme Russ
• [U-Boot] [PATCH-OMAP3] OMAP3: Convert readl/writel and replace hardcoded values   Wolfgang Denk
• [U-Boot] [PATCH-OMAP3] OMAP3: Convert readl/writel and replace hardcoded values   Graeme Russ
• [U-Boot] [PATCH-OMAP3] OMAP3: Convert readl/writel and replace hardcoded values   Dirk Behme
• [U-Boot] [PATCH-OMAP3] OMAP3: Convert readl/writel and replace hardcoded values   Dirk Behme
• [U-Boot] [PATCH-OMAP3] OMAP3: Convert readl/writel and replace hardcoded values   Kim Phillips
• [U-Boot] [PATCH-OMAP3] OMAP3: Fix broken NAND ECC HW switch   dirk.behme at googlemail.com
• [U-Boot] [PATCH-OMAP3] OMAP3: Fix broken NAND ECC HW switch   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH-OMAP3] OMAP3: Fix broken NAND ECC HW switch   dirk.behme at googlemail.com
• [U-Boot] [PATCH-OMAP3] OMAP3: Fix broken NAND ECC HW switch   Scott Wood
• [U-Boot] [PATCH-OMAP3] OMAP3: Fix broken NAND ECC HW switch   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH-OMAP3] OMAP3: Fix error in gpmc_init   dirk.behme at googlemail.com
• [U-Boot] [PATCH-OMAP3] OMAP3: Fix error in gpmc_init   Wolfgang Denk
• [U-Boot] [PATCH-OMAP3] OMAP3: Fix gpmc_cs_base pointer math in NAND   Wolfgang Denk
• [U-Boot] [PATCH-OMAP3] OMAP3: Fix gpmc_cs_base pointer math in NAND   dirk.behme at googlemail.com
• [U-Boot] [PATCH-OMAP3] OMAP3: Fix I2C driver merge error   Dirk Behme
• [U-Boot] [PATCH-OMAP3] OMAP3: Fix I2C driver merge error   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH-OMAP3] OMAP3: Fix merge error in omap3 header   Dirk Behme
• [U-Boot] [PATCH-OMAP3] OMAP3: Fix merge error in omap3 header   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH-OMAP3] OMAP3: Fix multiline comment style   dirk.behme at googlemail.com
• [U-Boot] [PATCH-OMAP3] OMAP3: Fix multiline comment style   Wolfgang Denk
• [U-Boot] [PATCH-OMAP3] OMAP3: Fix typo and cp_delay   dirk.behme at googlemail.com
• [U-Boot] [PATCH-OMAP3] OMAP3: Fix typo and cp_delay   Wolfgang Denk
• [U-Boot] [PATCH-OMAP3] OMAP3: Introduce CONFIG_OMAP3_MMC   dirk.behme at googlemail.com
• [U-Boot] [PATCH-OMAP3] OMAP3: Introduce CONFIG_OMAP3_MMC   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH-OMAP3] OMAP3: Plain numbers don't need parens   dirk.behme at googlemail.com
• [U-Boot] [PATCH-OMAP3] OMAP3: Plain numbers don't need parens   Wolfgang Denk
• [U-Boot] [PATCH-OMAP3] OMAP3: Plain numbers don't need parens   Dirk Behme
• [U-Boot] [PATCH-OMAP3] OMAP3: Plain numbers don't need parens   Magnus Lilja
• [U-Boot] [PATCH-OMAP3] OMAP3: Plain numbers don't need parens   Wolfgang Denk
• [U-Boot] [PATCH-OMAP3] OMAP3: Plain numbers don't need parens   Graeme Russ
• [U-Boot] [PATCH-OMAP3] OMAP3: Plain numbers don't need parens   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH-OMAP3] OMAP3: Remove BITx magic   dirk.behme at googlemail.com
• [U-Boot] [PATCH-OMAP3] OMAP3: Remove BITx magic   Wolfgang Denk
• [U-Boot] [PATCH-OMAP3] OMAP3: Remove BITx magic   Dirk Behme
• [U-Boot] [PATCH-OMAP3] OMAP3: Update ARM's if then else logic in examples Makefile   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH-OMAP3] OMAP3: Update ARM's if then else logic in examples Makefile   Wolfgang Denk
• [U-Boot] [PATCH-OMAP3] OMAP3: Update ARM's if then else logic in examples Makefile   dirk.behme at googlemail.com
• [U-Boot] [PATCH-OMAP3] OMAP3: Update ARM's if then else logic in examples Makefile   dirk.behme at googlemail.com
• [U-Boot] [PATCH-OMAP3] OMAP3: Update ARM's if then else logic in examples Makefile   Dirk Behme
• [U-Boot] [PATCH-OMAP3] OMAP3: Use I2C file coding style   dirk.behme at googlemail.com
• [U-Boot] [PATCH-OMAP3] OMAP3: Use I2C file coding style   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH-OMAP3] OMAP3: Use I2C file coding style   Dirk Behme
• [U-Boot] [PATCH-OMAP3] OMAP3: Use I2C file coding style   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH-OMAP3] OMAP3: Use macro instead of value in lowlevel_init.S   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH-OMAP3] OMAP3: Use macro instead of value in lowlevel_init.S   dirk.behme at googlemail.com
• [U-Boot] [PATCH/RFC] Some speed improvements to U-Boot JFFS2 code   Joakim Tjernlund
• [U-Boot] [PATCH/RFC] Some speed improvements to U-Boot JFFS2 code   Joakim Tjernlund
• [U-Boot] [PATCH/RFC] Some speed improvements to U-Boot JFFS2 code   Ilya Yanok
• [U-Boot] [PATCH/RFC] Some speed improvements to U-Boot JFFS2 code   Wolfgang Denk
• [U-Boot] [PATCH/RFC] Some speed improvements to U-Boot JFFS2 code   Ilya Yanok
• [U-Boot] [PATCH/RFC] Some speed improvements to U-Boot JFFS2 code   Michael Lawnick
• [U-Boot] [PATCH/RFC] Some speed improvements to U-Boot JFFS2 code   Michael Lawnick
• [U-Boot] [PATCH/RFC] Some speed improvements to U-Boot JFFS2 code   Michael Lawnick
• [U-Boot] [PATCH/RFC] Some speed improvements to U-Boot JFFS2 code   Alexey Neyman
• [U-Boot] [PATCH] =?utf-8?q?rtc:=20add=20support=20for=204543=20RTC=20(manufactured=20by=20e.g.=20EPSON)   ap at denx.de
• [U-Boot] [PATCH] 85xx: Add CPU 2 errata workaround to all 8548 boards   Peter Tyser
• [U-Boot] [PATCH] 85xx: Add CPU 2 errata workaround to all 8548 boards   Kumar Gala
• [U-Boot] [PATCH] 85xx: Add CPU 2 errata workaround to all 8548 boards   Peter Tyser
• [U-Boot] [PATCH] 85xx: Fix relocation of CCSRBAR   Kumar Gala
• [U-Boot] [PATCH] 85xx: Fix relocation of CCSRBAR   Peter Tyser
• [U-Boot] [PATCH] 85xx: Fix relocation of CCSRBAR   Kumar Gala
• [U-Boot] [PATCH] 85xx: fix the wrong DDR settings for MPC8572DS   Dave Liu
• [U-Boot] [PATCH] 85xx: socrates: fix DDR SDRAM tlb entry configuration   Anatolij Gustschin
• [U-Boot] [PATCH] 8641HPCN: Config file cleanup   Jon Loeliger
• [U-Boot] [PATCH] 86xx: Fix non-64-bit compilation problems.   Jon Loeliger
• [U-Boot] [PATCH] 86xx: Make dram_size a phys_size_t   Jon Loeliger
• [U-Boot] [PATCH] [ARM] Apollon UBI support v3   Magnus Lilja
• [U-Boot] [PATCH] [ARM] Apollon UBI support v3   Kyungmin Park
• [U-Boot] [PATCH] [ARM] Change flag check in lib_arm/bootm.c::do_bootm_linux() to allow booting.   Peter Pearse
• [U-Boot] [PATCH] [ARM] Change flag check in lib_arm/bootm.c::do_bootm_linux() to allow booting.   Peter Pearse
• [U-Boot] [PATCH] [ARM] Move machine specific code to board at s3c64xx (v2)   Kyungmin Park
• [U-Boot] [PATCH] [ONENAND] Add markbad function   Kyungmin Park
• [U-Boot] [PATCH] [ONENAND] Add markbad function   Scott Wood
• [U-Boot] [PATCH] [OneNAND] bad block aware read/write support   Kyungmin Park
• [U-Boot] [PATCH] [OneNAND] bad block aware read/write support   Stefan Roese
• [U-Boot] [PATCH] [OneNAND] bad block aware read/write support   Stefan Roese
• [U-Boot] [PATCH] [OneNAND] bad block aware read/write support   Kyungmin Park
• [U-Boot] [PATCH] [OneNAND] bad block aware read/write support   Stefan Roese
• [U-Boot] [PATCH] [ONENAND] Reduce OneNAND IPL code size v2   Kyungmin Park
• [U-Boot] [PATCH] [OneNAND] Sync with 2.6.27   Kyungmin Park
• [U-Boot] [PATCH] [OneNAND] Sync with 2.6.27   Scott Wood
• [U-Boot] [PATCH] [UBI] Basic Unsorted Block Image (UBI) support v3 (#1)   Magnus Lilja
• [U-Boot] [PATCH] [UBI] Basic Unsorted Block Image (UBI) support v3 (#1)   Kyungmin Park
• [U-Boot] [PATCH] [UBI] Basic Unsorted Block Image (UBI) support v3 (#1)   Magnus Lilja
• [U-Boot] [PATCH] [UBI] Basic Unsorted Block Image (UBI) support v3 (#5)   Magnus Lilja
• [U-Boot] [PATCH] [UBI] Set default UBI partition name at configuration   Kyungmin Park
• [U-Boot] [PATCH] [UBI] Set default UBI partition name at configuration   Stefan Roese
• [U-Boot] [PATCH] [UBI] UBI command support (take #2)   Wolfgang Denk
• [U-Boot] [PATCH] [UBI] UBI command support (take #2)   Kyungmin Park
• [U-Boot] [PATCH] [UBI] UBI command support (take #2)   Stefan Roese
• [U-Boot] [PATCH] [UBI] UBI command support v3   Kyungmin Park
• [U-Boot] [PATCH] [UBI] UBI command support v3   Magnus Lilja
• [U-Boot] [PATCH] [UBI] UBI command support v3   Kyungmin Park
• [U-Boot] [PATCH] Add "memenv" command, to set environment from a memory area   Alessandro Rubini
• [U-Boot] [PATCH] Add AT2440 (S3C2440) board support   sdandella
• [U-Boot] [PATCH] Add IC Identif Module (IIM) support for ADS5121   Wolfgang Denk
• [U-Boot] [PATCH] Add README file for MPC8572DS board   Haiying Wang
• [U-Boot] [PATCH] Add support for boards where the NOR FLASH is not memory-mapped   Stefan Roese
• [U-Boot] [PATCH] add support for Toradex Colibri PXA300 module   Daniel Mack
• [U-Boot] [PATCH] Added a do_div() wrapper macro, lldiv().   sposelenov at emcraft.com
• [U-Boot] [PATCH] Added a do_div() wrapper macro, lldiv().   Wolfgang Denk
• [U-Boot] [PATCH] Added a do_div() wrapper macro, lldiv().   Sergei Poselenov
• [U-Boot] [PATCH] Added optional iteration limit for alternative memory test.   Dirk Eibach
• [U-Boot] [PATCH] Added support for the Guntermann & Drunck PowerPC 440 EP/GR ETX module.   Wolfgang Denk
• [U-Boot] [PATCH] Added support for the Guntermann & Drunck PowerPC 440 EP/GR ETX module.   Stefan Roese
• [U-Boot] [PATCH] Added support for the Guntermann & Drunck PowerPC 440 EP/GR ETX module.   Stefan Roese
• [U-Boot] [PATCH] Added support for the Guntermann & Drunck PowerPC 440 EP/GR ETX module.   Wolfgang Denk
• [U-Boot] [PATCH] Added support for the Guntermann & Drunck PowerPC 440 EP/GR ETX module.   Wolfgang Denk
• [U-Boot] [PATCH] Added support for the Guntermann & Drunck PowerPC 440 EP/GR ETX module.   Dirk Eibach
• [U-Boot] [PATCH] Added support for the Guntermann & Drunck PowerPC 440 EP/GR ETX module.   Jerry Van Baren
• [U-Boot] [PATCH] Added support for the Guntermann & Drunck PowerPC 440 EP/GR ETX module.   Eibach, Dirk
• [U-Boot] [PATCH] Added support for TMQ CAPD Board from Genesys Design <www.genesysdesign.com.au>   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] Added support for TMQ CAPD Board from Genesys Design <www.genesysdesign.com.au>   Jared Holzman
• [U-Boot] [PATCH] Align end of bss by 4 bytes   Selvamuthukumar
• [U-Boot] [PATCH] Align end of bss by 4 bytes,   Wolfgang Denk
• [U-Boot] [PATCH] ARM: OMAP: I2C coding style clean up   dirk.behme at googlemail.com
• [U-Boot] [PATCH] ARM: OMAP: I2C coding style clean up   Wolfgang Denk
• [U-Boot] [PATCH] ARM: Use do_div() instead of division for "long long".   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] at91: add support for PM9261 board   Ilko Iliev
• [U-Boot] [PATCH] at91: add support for PM9263 board   Ilko Iliev
• [U-Boot] [PATCH] at91: add support for PM9263 board   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] at91: board specific lowlevel_init.S   Ilko Iliev
• [U-Boot] [PATCH] at91: board specific lowlevel_init.S   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] at91: board specific lowlevel_init.S   Wolfgang Denk
• [U-Boot] [PATCH] at91: board specific lowlevel_init.S   Ilko Iliev
• [U-Boot] [PATCH] at91: board specific lowlevel_init.S   Ilko Iliev
• [U-Boot] [PATCH] AT91: Enable PLLB for USB   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] AT91: Enable PLLB for USB   Stelian Pop
• [U-Boot] [PATCH] AT91: Enable PLLB for USB   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] AT91: Replace (undefined) AT91_ID_US* by the board specific values.   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] AT91: Replace AT91_BASE_EMAC by the board specific values.   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] AT91: Use AT91_CPU_CLOCK in displays   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] AT91: Use AT91_CPU_CLOCK in displays   Stelian Pop
• [U-Boot] [PATCH] AT91: Use AT91_CPU_CLOCK in displays   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] AT91RM9200 BGA port D defines   Jens Scharsig
• [U-Boot] [PATCH] at91rm9200: fix broken boot from nor flash   Jens Scharsig
• [U-Boot] [PATCH] at91rm9200: fix broken boot from nor flash   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] at91rm9200: fix broken boot from nor flash   Wolfgang Denk
• [U-Boot] [PATCH] at91rm9200: fix broken boot from nor flash   Jens Scharsig
• [U-Boot] [PATCH] at91rm9200: fix broken boot from nor flash   Wolfgang Denk
• [U-Boot] [PATCH] at91rm9200: fix broken boot from nor flash   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] at91rm9200: fix broken boot from nor flash   Pink Boy
• [U-Boot] [PATCH] AT91RM9200DK: fix broken boot from NOR flash   Wolfgang Denk
• [U-Boot] [PATCH] AT91RM9200DK: fix broken boot from NOR flash   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] avr32/bootm: remove unused variable 'ret'   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] avr32/bootm: remove unused variable 'ret'   Haavard Skinnemoen
• [U-Boot] [PATCH] avr32/cmd_bdinfo: fix printf() format warnings   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] avr32/cmd_bdinfo: fix printf() format warnings   Dirk Behme
• [U-Boot] [PATCH] avr32/cmd_bdinfo: fix printf() format warnings   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] bios_emulator: only build when CONFIG_BIOSEMU   Mike Frysinger
• [U-Boot] [PATCH] bios_emulator: only build when CONFIG_BIOSEMU   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] Bits reversed in ppc4xx.h   Steven A. Falco
• [U-Boot] [PATCH] Bits reversed in ppc4xx.h   Stefan Roese
• [U-Boot] [PATCH] Blackfin: fix linker scripts to work with --gc-sections   Mike Frysinger
• [U-Boot] [PATCH] Blackfin: use common strmhz() in system output   Mike Frysinger
• [U-Boot] [PATCH] bootvx: Cleanup & improvements   Niklaus Giger
• [U-Boot] [PATCH] bootvx: Cleanup & improvements   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] bootvx: Cleanup & improvements   Niklaus Giger
• [U-Boot] [PATCH] bootvx: Cleanup & improvements   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] bootvx: Cleanup & improvements   Wolfgang Denk
• [U-Boot] [PATCH] bug fix for the delay function of ARM s3c44b0   Chaofu Chen
• [U-Boot] [PATCH] bug fix for the delay function of ARM s3c44b0   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] cfi_flash: Make all flash access functions weak   Stefan Roese
• [U-Boot] [PATCH] cfi_flash: Make all flash access functions weak   Haavard Skinnemoen
• [U-Boot] [PATCH] cfi_flash: Make all flash access functions weak   Stefan Roese
• [U-Boot] [PATCH] cfi_flash: Make all flash access functions weak   Stefan Roese
• [U-Boot] [PATCH] cfi_flash: Make all flash access functions weak   Haavard Skinnemoen
• [U-Boot] [PATCH] cfi_flash: Make all flash access functions weak   Stefan Roese
• [U-Boot] [PATCH] cfi_flash: Make all flash access functions weak   Haavard Skinnemoen
• [U-Boot] [PATCH] cfi_flash: Make all flash access functions weak   Stefan Roese
• [U-Boot] [PATCH] cmd_bdinfo: move implementation to arch instead of common   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] cmd_bdinfo: move implementation to arch instead of common   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] cmd_bdinfo: move implementation to arch instead of common   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] cmd_bdinfo: move implementation to arch instead of common   Mike Frysinger
• [U-Boot] [PATCH] cmd_bdinfo: move implementation to arch instead of common   Mike Frysinger
• [U-Boot] [PATCH] cmd_bdinfo: move implementation to arch instead of common   Mike Frysinger
• [U-Boot] [PATCH] cmd_bdinfo: move implementation to arch instead of common   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] cmd_bdinfo: move implementation to arch instead of common   Jerry Van Baren
• [U-Boot] [PATCH] cmd_bdinfo: move implementation to arch instead of common   Haavard Skinnemoen
• [U-Boot] [PATCH] cmd_elf: CONFIG_ELF_SIMPLE_LOAD: load ELFs according to PHDRs   Mike Frysinger
• [U-Boot] [PATCH] cmd_mem: Remove unused variable   Peter Tyser
• [U-Boot] [PATCH] common/cmd_ide.c: Corrected endian order printing for compact flash serial number.   Richard Retanubun
• [U-Boot] [PATCH] common/cmd_ide.c: Corrected endian order printing for compact flash serial number.   Richard Retanubun
• [U-Boot] [PATCH] dataflash: fix a problem with the last partition   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] dataflash: fix a problem with the last partition   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] dataflash: fix a problem with the last partition   Wolfgang Denk
• [U-Boot] [PATCH] dataflash: fix a problem with the last partition   Wolfgang Denk
• [U-Boot] [PATCH] Delete unused definitions for SDR0_DDRCFG from ppc4xx.h   Steven A. Falco
• [U-Boot] [PATCH] Delete unused definitions for SDR0_DDRCFG from ppc4xx.h   Stefan Roese
• [U-Boot] [PATCH] drivers/bios_emulator: Move conditional compilation to Makefile   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] drivers/fsl_pci_init: Fix inbound window mapping bug   beckyb at kernel.crashing.org
• [U-Boot] [PATCH] drivers/net/ax88796.h revised   Daniel Mack
• [U-Boot] [PATCH] drivers/qe/uec_phy.c: Added PHY-less (fixed PHY) driver.   Ben Warren
• [U-Boot] [PATCH] drivers/qe/uec_phy.c: Added PHY-less (fixed PHY) driver.   Ben Warren
• [U-Boot] [PATCH] drivers/usb: Move conditional compilation to Makefile   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] FAT on non standard sector size devices   Igor Luri
• [U-Boot] [PATCH] FAT on non standard sector size devices   Remy Bohmer
• [U-Boot] [PATCH] FAT on non standard sector size devices   Igor Luri
• [U-Boot] [PATCH] FAT on non standard sector size devices   Igor Luri
• [U-Boot] [PATCH] FAT on non standard sector size devices   Remy Bohmer
• [U-Boot] [PATCH] FAT on non standard sector size devices   Wolfgang Denk
• [U-Boot] [PATCH] FAT on non standard sector size devices   Igor Luri
• [U-Boot] [PATCH] FAT on non standard sector size devices   Jerry Van Baren
• [U-Boot] [PATCH] FAT on non standard sector size devices   Igor Luri
• [U-Boot] [PATCH] FAT on non standard sector size devices   Remy Bohmer
• [U-Boot] [PATCH] Fix FDT support to use fdt blob and FIT together or not   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] Fix FDT support to use fdt blob and FIT together or not   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] Fix FDT support to use fdt blob and FIT together or not   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] Fix FDT support to use fdt blob and FIT together or not   Wolfgang Denk
• [U-Boot] [PATCH] Fix FDT support to use fdt blob and FIT together or not   Wolfgang Denk
• [U-Boot] [PATCH] Fix FDT support to use fdt blob and FIT together or not   Wolfgang Denk
• [U-Boot] [PATCH] Fix FDT support to use fdt blob and FIT together or not   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] Fix FIT and fdt blob support to have CONFIG_OF_LIBFDT and CONFIG_FIT independant   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] Fix FIT and fdt blob support to have CONFIG_OF_LIBFDT and CONFIG_FIT independant   Wolfgang Denk
• [U-Boot] [PATCH] fix lib_arm/bootm.c   Daniel Mack
• [U-Boot] [PATCH] fix lib_arm/bootm.c   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] fix lib_arm/bootm.c   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] fix lib_arm/bootm.c   Jerry Van Baren
• [U-Boot] [PATCH] fix lib_arm/bootm.c   Dirk Behme
• [U-Boot] [PATCH] flash: Add interface for flash verbosity control   Stefan Roese
• [U-Boot] [PATCH] flash: Add interface for flash verbosity control   Piotr Ziecik
• [U-Boot] [PATCH] flash: Export flash_sector_size() function.   Piotr Ziecik
• [U-Boot] [PATCH] flash: Export flash_sector_size() function.   Haavard Skinnemoen
• [U-Boot] [PATCH] flash: Export flash_sector_size() function.   Piotr Zięcik
• [U-Boot] [PATCH] flash: Export flash_sector_size() function.   Haavard Skinnemoen
• [U-Boot] [PATCH] Flex-OneNAND driver   Rohit
• [U-Boot] [PATCH] Flex-OneNAND driver   Amit Kumar Sharma
• [U-Boot] [PATCH] Flex-OneNAND driver   Scott Wood
• [U-Boot] [PATCH] fsl ddr skip interleaving if not supported.   Wolfgang Denk
• [U-Boot] [PATCH] fsl-ddr: update the bit mask for DDR3 controller   Liu Dave
• [U-Boot] [PATCH] fsl-ddr: update the bit mask for DDR3 controller   Dave Liu
• [U-Boot] [PATCH] Hardware diagnosis for inka4x0 boards.   ap at denx.de
• [U-Boot] [PATCH] Hardware diagnosis for inka4x0 boards.   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] ignore .gdb_history files   Mike Frysinger
• [U-Boot] [PATCH] Initial support for Nomadik 8815 development board   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] Initial support for Nomadik 8815 development board   Alessandro Rubini
• [U-Boot] [PATCH] inka4x0: board specific RTC support.   ap at denx.de
• [U-Boot] [PATCH] inka4x0: board specific RTC support.   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] inka4x0: hardware diagnosis and RTC.   ap at denx.de
• [U-Boot] [PATCH] inka4x0: hardware diagnosis and RTC.   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] inka4x0: hardware diagnosis and RTC.   Wolfgang Denk
• [U-Boot] [PATCH] jffs2: rename devices_init () in common/jffs2.c   Heiko Schocher
• [U-Boot] [PATCH] katmai: change default config   Yuri Tikhonov
• [U-Boot] [PATCH] katmai: change default config   Stefan Roese
• [U-Boot] [PATCH] keymile add the common parts of the HDLC driver   Gary Jennejohn
• [U-Boot] [PATCH] lcd: Let the board code show board-specific info cleanup   Peter Tyser
• [U-Boot] [PATCH] lcd: Let the board code show board-specific info cleanup   Wolfgang Denk
• [U-Boot] [PATCH] lib_arm: do_bootm_linux() - correct a small mistake   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] lib_arm: do_bootm_linux() - correct a small mistake   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] lib_arm: do_bootm_linux() - correct a small mistake   Ilko Iliev
• [U-Boot] [PATCH] lib_arm: do_bootm_linux() - correct a small mistake   Ilko Iliev
• [U-Boot] [PATCH] lib_ppc: Move trap_init to occur earlier   Jon Loeliger
• [U-Boot] [PATCH] lib_ppc: Move trap_init to occur earlier   Jon Loeliger
• [U-Boot] [PATCH] lib_ppc: Move trap_init to occur earlier   Wolfgang Denk
• [U-Boot] [PATCH] lib_ppc: Move trap_init to occur earlier   Wolfgang Denk
• [U-Boot] [PATCH] libfdt: Fix redefined uintptr_t warning for USE_HOSTCC   Jerry Van Baren
• [U-Boot] [PATCH] lwmon, tqm8xx: Fix build errors   Anatolij Gustschin
• [U-Boot] [PATCH] Makefile/at91sam9: move some at91sam9 to the correct subsection for arm926ejs   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] Makefile: use find to simplify clobber and avoid some bash problem   Peter Tyser
• [U-Boot] [PATCH] Makefile: use find to simplify clobber and avoid some bash problem   Peter Tyser
• [U-Boot] [PATCH] Makefile: use find to simplify clobber and avoid some bash problem   Mike Frysinger
• [U-Boot] [PATCH] Makefile: use find to simplify clobber and avoid some bash problem   Mike Frysinger
• [U-Boot] [PATCH] Makefile: use find to simplify clobber and avoid some bash problem   Wolfgang Denk
• [U-Boot] [PATCH] Makefile: use find to simplify clobber and avoid some bash problem   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] Makefile: use find to simplify clobber and avoid some bash problem   Jerry Van Baren
• [U-Boot] [PATCH] mgcoge add the board-specific part of the HDLC driver   Gary Jennejohn
• [U-Boot] [PATCH] mgcoge make ether_scc.c work with CONFIG_NET_MULTI   Ben Warren
• [U-Boot] [PATCH] mgcoge make ether_scc.c work with CONFIG_NET_MULTI   Gary Jennejohn
• [U-Boot] [PATCH] mgcoge make ether_scc.c work with CONFIG_NET_MULTI   Ben Warren
• [U-Boot] [PATCH] mgcoge make ether_scc.c work with CONFIG_NET_MULTI   Gary Jennejohn
• [U-Boot] [PATCH] mgcoge make ether_scc.c work with CONFIG_NET_MULTI   Gary Jennejohn
• [U-Boot] [PATCH] mgsuvd add the board-specific part of the HDLC driver   Gary Jennejohn
• [U-Boot] [PATCH] MIPS: Add board_early_init_f() to init_sequence   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] MIPS: Add board_early_init_f() to init_sequence   Shinya Kuribayashi
• [U-Boot] [PATCH] MIPS: Add board_early_init_f() to init_sequence   Stefan Roese
• [U-Boot] [PATCH] MIPS: Add board_early_init_f() to init_sequence   Stefan Roese
• [U-Boot] [PATCH] MIPS: Add board_early_init_f() to init_sequence   Shinya Kuribayashi
• [U-Boot] [PATCH] MIPS: Add board_early_init_f() to init_sequence   Stefan Roese
• [U-Boot] [PATCH] MIPS: Add board_early_init_f() to init_sequence   Shinya Kuribayashi
• [U-Boot] [PATCH] MIPS: Add CONFIG_SKIP_LOWLEVEL_INIT   Stefan Roese
• [U-Boot] [PATCH] MIPS: Add CONFIG_SKIP_LOWLEVEL_INIT   Shinya Kuribayashi
• [U-Boot] [PATCH] MIPS: Add CONFIG_SKIP_LOWLEVEL_INIT and flush dcache upon relocation   Stefan Roese
• [U-Boot] [PATCH] MIPS: Add CONFIG_SKIP_LOWLEVEL_INIT and flush dcache upon relocation   Stefan Roese
• [U-Boot] [PATCH] MIPS: Add CONFIG_SKIP_LOWLEVEL_INIT and flush dcache upon relocation   Shinya Kuribayashi
• [U-Boot] [PATCH] MIPS: Add CONFIG_SKIP_LOWLEVEL_INIT and flush dcache upon relocation   Shinya Kuribayashi
• [U-Boot] [PATCH] MIPS: Add onenand_init() to board.c and move nand_init()   Stefan Roese
• [U-Boot] [PATCH] MIPS: Add onenand_init() to board.c and move nand_init()   Shinya Kuribayashi
• [U-Boot] [PATCH] MIPS: Flush data cache upon relocation   Stefan Roese
• [U-Boot] [PATCH] MIPS: Flush data cache upon relocation   Shinya Kuribayashi
• [U-Boot] [PATCH] Modified I.MX31 targets to use lldiv().   sposelenov at emcraft.com
• [U-Boot] [PATCH] Modified I.MX31 targets to use lldiv().   sposelenov at emcraft.com
• [U-Boot] [PATCH] Modified I.MX31 targets to use lldiv().   Wolfgang Denk
• [U-Boot] [PATCH] Modified I.MX31 targets to use lldiv().   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] Modified I.MX31 targets to use lldiv().   Sergei Poselenov
• [U-Boot] [PATCH] Modified I.MX31 targets to use lldiv().   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] mpc83xx: enable eLBC NAND support for MPC8315ERDB board   Scott Wood
• [U-Boot] [PATCH] mpc83xx: enable eLBC NAND support for MPC8315ERDB board   Dave Liu
• [U-Boot] [PATCH] mpc83xx: Improve the performance of DDR memory   Dave Liu
• [U-Boot] [PATCH] mpc83xx: Improve the performance of DDR memory   Kim Phillips
• [U-Boot] [PATCH] mpc83xx: increase BOOTMAPSZ to 16MB   Anton Vorontsov
• [U-Boot] [PATCH] mpc83xx: increase BOOTMAPSZ to 16MB   Kim Phillips
• [U-Boot] [PATCH] mpc83xx: increase BOOTMAPSZ to 16MB   Anton Vorontsov
• [U-Boot] [PATCH] mpc83xx: New board support SIMPC8313   Ron Madrid
• [U-Boot] [PATCH] mpc83xx: New board support SIMPC8313   Kim Phillips
• [U-Boot] [PATCH] mpc83xx: New board support SIMPC8313   Ron Madrid
• [U-Boot] [PATCH] mpc83xx: New board support SIMPC8313   Kim Phillips
• [U-Boot] [PATCH] mpc83xx: New board support SIMPC8313   Ron Madrid
• [U-Boot] [PATCH] mpc83xx: New board support SIMPC8313   Wolfgang Denk
• [U-Boot] [PATCH] mpc83xx: New board support SIMPC8313   Ron Madrid
• [U-Boot] [PATCH] mpc83xx: New board support SIMPC8313   Kim Phillips
• [U-Boot] [PATCH] mpc83xx: New board support SIMPC8313   Ron Madrid
• [U-Boot] [PATCH] mpc83xx: New board support SIMPC8313   Scott Wood
• [U-Boot] [PATCH] mpc83xx: New board support SIMPC8313   Ron Madrid
• [U-Boot] [PATCH] mpc83xx: New board support SIMPC8313   Scott Wood
• [U-Boot] [PATCH] mpc8641: fix address-cells default in old .dts detection   Jon Loeliger
• [U-Boot] [PATCH] mpc8641: fix address-cells default in old .dts detection   Becky Bruce
• [U-Boot] [PATCH] mpc8641: Fix error in README   Becky Bruce
• [U-Boot] [PATCH] mpc8641: Fix error in README   Jon Loeliger
• [U-Boot] [PATCH] mpc8641: Make PCI and RIO mutually exclusive, fix non-PCI build   Jon Loeliger
• [U-Boot] [PATCH] mpc8641: Stop supporting non-PCI_PNP configs   Jon Loeliger
• [U-Boot] [PATCH] mpc8641: Try to detect old .dts files   Becky Bruce
• [U-Boot] [PATCH] mpc8641: Try to detect old .dts files   Scott Wood
• [U-Boot] [PATCH] mpc8641: Try to detect old .dts files   Becky Bruce
• [U-Boot] [PATCH] MTD: Fix problem based on non-working relocation (list head mtd_partitions)   Stefan Roese
• [U-Boot] [PATCH] nand booting support (SPL) for phyCORE-i.MX31   user
• [U-Boot] [PATCH] nand booting support (SPL) for phyCORE-i.MX31   Magnus Lilja
• [U-Boot] [PATCH] NAND: fixed bugs in nand_[read, write]_skip_bad()   Valeriy Glushkov
• [U-Boot] [PATCH] NAND: fixed bugs in nand_[read, write]_skip_bad()   Scott Wood
• [U-Boot] [PATCH] NAND: fixed bugs in nand_[read,write]_skip_bad()   Valeriy Glushkov
• [U-Boot] [PATCH] ne2000: take MAC address from config if available   Daniel Mack
• [U-Boot] [PATCH] ne2000: take MAC address from config if available   Ben Warren
• [U-Boot] [PATCH] ne2000: take MAC address from config if available   Daniel Mack
• [U-Boot] [PATCH] net/net.c: correct timeout function   Daniel Mack
• [U-Boot] [PATCH] net: smc911x: Make register read/write functions weak   Ben Warren
• [U-Boot] [PATCH] net: smc911x: Make register read/write functions weak   Stefan Roese
• [U-Boot] [PATCH] Olimex SAM9-L9260 board support   Cristian Birsan
• [U-Boot] [PATCH] Olimex SAM9-L9260 board support   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] OMAP3: set L1NEON bit in aux control register   Mans Rullgard
• [U-Boot] [PATCH] OMAP3: set L1NEON bit in aux control register   Dirk Behme
• [U-Boot] [PATCH] OneNAND: Add missing mtd info struct before calling onenand_erase()   Stefan Roese
• [U-Boot] [PATCH] OneNAND: Bad block aware read/write command support   Stefan Roese
• [U-Boot] [PATCH] OneNAND: Fix compiler warnings   Stefan Roese
• [U-Boot] [PATCH] OneNAND: Fix compiler warnings   Scott Wood
• [U-Boot] [PATCH] OneNAND: Fix compiler warnings and add weak attribute to memcpy_16()   Stefan Roese
• [U-Boot] [PATCH] OneNAND: Fix compiler warnings and add weak attribute to memcpy_16()   Stefan Roese
• [U-Boot] [PATCH] OneNAND: Fix compiler warnings and add weak attribute to memcpy_16()   Stefan Roese
• [U-Boot] [PATCH] OneNAND: Fix compiler warnings and add weak attribute to memcpy_16()   Scott Wood
• [U-Boot] [PATCH] OneNAND: Fix compiler warnings and add weak attribute to memcpy_16()   Scott Wood
• [U-Boot] [PATCH] OneNAND: Save version_id in onenand_chip struct   Stefan Roese
• [U-Boot] [PATCH] OneNAND: Save version_id in onenand_chip struct   Scott Wood
• [U-Boot] [PATCH] part 2. Embedded PlanetBoards   kadamsagar123
• [U-Boot] [PATCH] POWERPC 82xx: add the SCC as an HDLC controller   Gary Jennejohn
• [U-Boot] [PATCH] powerpc: change 86xx SMP boot method   Becky Bruce
• [U-Boot] [PATCH] powerpc: change 86xx SMP boot method   Becky Bruce
• [U-Boot] [PATCH] powerpc: change 86xx SMP boot method   Liu Dave-R63238
• [U-Boot] [PATCH] powerpc: change 86xx SMP boot method   Becky Bruce
• [U-Boot] [PATCH] powerpc: change 86xx SMP boot method   Becky Bruce
• [U-Boot] [PATCH] powerpc: change 86xx SMP boot method   Jon Loeliger
• [U-Boot] [PATCH] ppc4xx: Added ppc4xx-isram.h for internal SRAM and L2 cache DCRs   Stefan Roese
• [U-Boot] [PATCH] ppc4xx: Added ppc4xx-isram.h for internal SRAM and L2 cache DCRs   Dave Mitchell
• [U-Boot] [PATCH] ppc4xx: Changed 460EX/GT OCM TLB and internal SRAM initialization   Stefan Roese
• [U-Boot] [PATCH] ppc4xx: Changed 460EX/GT OCM TLB and internal SRAM initialization   Dave Mitchell
• [U-Boot] [PATCH] ppc4xx: Clear all potentially pending exceptions in MCSR   Stefan Roese
• [U-Boot] [PATCH] ppc4xx: ML2 shouldn't include the 4xx EMAC driver   Stefan Roese
• [U-Boot] [PATCH] ppc: Fix compile warnings when !CONFIG_OF_LIBFDT   Wolfgang Denk
• [U-Boot] [PATCH] PXA3xx: fix CKEN[AB]   Daniel Mack
• [U-Boot] [PATCH] Remove compiler warning: target CPU does not support interworking   sposelenov at emcraft.com
• [U-Boot] [PATCH] Remove unneeded CONFIG_SHELL references   Peter Tyser
• [U-Boot] [PATCH] Removed unused CONFIG_L1_INIT_RAM symbol.   Jon Loeliger
• [U-Boot] [PATCH] Section name should be ".data" not "data"   Trent Piepho
• [U-Boot] [PATCH] serial: Add vcth UART driver   Stefan Roese
• [U-Boot] [PATCH] sh: Changed value of CACHE_OC_NUM_ENTRIES and CACHE_OC_WAY_SHIFT   Nobuhiro Iwamatsu
• [U-Boot] [PATCH] sh: fix rsk7203 and MigoR out of tree build   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] sh: fix rsk7203 and MigoR out of tree build   Nobuhiro Iwamatsu
• [U-Boot] [PATCH] sh: Migo-R: Update BSC value   Nobuhiro Iwamatsu
• [U-Boot] [PATCH] sh: sh7763rdp: Update sh7763rdp config   Nobuhiro Iwamatsu
• [U-Boot] [PATCH] sh: sh7763rdp: Update sh7763rdp config   Ben Warren
• [U-Boot] [PATCH] sh: sh_eth: Change new network API   Nobuhiro Iwamatsu
• [U-Boot] [PATCH] sh: sh_eth: Change new network API   Ben Warren
• [U-Boot] [PATCH] sh: sh_eth: Change new network API   Ben Warren
• [U-Boot] [PATCH] sh: Update ms7722se board config   Nobuhiro Iwamatsu
• [U-Boot] [PATCH] sh: Update sh timer function   Nobuhiro Iwamatsu
• [U-Boot] [PATCH] sh: Update sh timer function   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] sh: Update sh timer function   Nobuhiro Iwamatsu
• [U-Boot] [PATCH] sh: Update SuperH serial driver   Nobuhiro Iwamatsu
• [U-Boot] [PATCH] SPARC: Fixed compiler error introduced by commit c160a9544743e80e8889edb2275538e7764ce334   Daniel Hellstrom
• [U-Boot] [PATCH] strings: use puts() rather than printf()   Mike Frysinger
• [U-Boot] [PATCH] strings: use puts() rather than printf()   Scott Wood
• [U-Boot] [PATCH] toplevel Makefile: Add MPC8641HPCN_36BIT target   Becky Bruce
• [U-Boot] [PATCH] toplevel Makefile: Add MPC8641HPCN_36BIT target   Scott Wood
• [U-Boot] [PATCH] toplevel Makefile: Add MPC8641HPCN_36BIT target   Becky Bruce
• [U-Boot] [PATCH] toplevel Makefile: Add MPC8641HPCN_36BIT target   Scott Wood
• [U-Boot] [PATCH] toplevel Makefile: Add MPC8641HPCN_36BIT target   Becky Bruce
• [U-Boot] [PATCH] TQM8260: use CFI flash driver instead of custom driver.   Wolfgang Denk
• [U-Boot] [patch] U-Boot Firetux board support   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [patch] U-Boot Firetux board support   Jürgen Schöw
• [U-Boot] [patch] U-Boot Firetux board support   Jürgen Schöw
• [U-Boot] [patch] U-Boot Firetux board support   Jürgen Schöw
• [U-Boot] [patch] U-Boot Firetux board support   Scott Wood
• [U-Boot] [PATCH] UBI: Change parsing of size in commands to default to hex   Stefan Roese
• [U-Boot] [PATCH] UBI: Change size of UBI commands to default to hex instead of decimal   Wolfgang Denk
• [U-Boot] [PATCH] UBI: Change size of UBI commands to default to hex instead of decimal   Stefan Roese
• [U-Boot] [PATCH] UBI: Change size of UBI commands to default to hex instead of decimal   Stefan Roese
• [U-Boot] [PATCH] UBI: Enable re-initializing of the "ubi part" command   Stefan Roese
• [U-Boot] [PATCH] usbtty/omap: update to current API   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] usbtty/omap: update to current API   Wolfgang Denk
• [U-Boot] [PATCH] usbtty/omap: update to current API   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] usbtty/omap: update to current API   Remy Bohmer
• [U-Boot] [PATCH] usbtty/omap: update to current API   Bryan O'Donoghue
• [U-Boot] [PATCH] usbtty/omap: update to current API   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] Use bash for default GNU Make shell application   Peter Tyser
• [U-Boot] [PATCH]: FFS/UFS filesystems support   Wolfgang Denk
• [U-Boot] [PATCH]: FFS/UFS filesystems support   Stanislav Sedov
• [U-Boot] [PATCH]=?utf-8?q?rtc:=20add=20support=20for=204543=20RTC=20(manufactured=20by=20e.g.=20EPSON)   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH]v2: Fixed lineendings in tools/img2brec.sh   Niklaus Giger
• [U-Boot] [POWERPC] mgsuvd: remove unused defines in config file.   Wolfgang Denk
• [U-Boot] [ppc4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git   Wolfgang Denk
• [U-Boot] [ppc4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git   Stefan Roese
• [U-Boot] [ppc4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git   Stefan Roese
• [U-Boot] [ppc4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git   Wolfgang Denk
• [U-Boot] [Qemu-devel] [PowerPC] New board walnut with u-boot   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [RFC PATCH 0/1] Add ehci core   Michael Trimarchi
• [U-Boot] [RFC PATCH 0/1] Add ehci core   Remy Bohmer
• [U-Boot] [RFC PATCH 0/1] Add ehci core   Michael Trimarchi
• [U-Boot] [RFC PATCH 0/1] Add ehci core   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [RFC PATCH 0/1] Add ehci core   Remy Bohmer
• [U-Boot] [RFC PATCH 0/1] Add ehci core   michael
• [U-Boot] [RFC PATCH 0/6] Some speed improvements to U-Boot JFFS2 code (updated)   Ilya Yanok
• [U-Boot] [RFC PATCH 1/1] Add ehci freescale support   Michael Trimarchi
• [U-Boot] [RFC PATCH 1/1] Add ehci freescale support   Michael Trimarchi
• [U-Boot] [RFC PATCH 1/1] Add ehci freescale support   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [RFC PATCH V2 0/2] Prepare USB layer to support ehci core   Michael Trimarchi
• [U-Boot] [RFC PATCH V2 0/3] USB ehci   Michael Trimarchi
• [U-Boot] [RFC PATCH V2 1/2] Add USB ehci core files   Michael Trimarchi
• [U-Boot] [RFC PATCH V2 1/2] Add USB ehci core files   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [RFC PATCH V2 1/3] Prepare USB layer for ehci   Michael Trimarchi
• [U-Boot] [RFC PATCH V2 2/2] Add Freescale ehci USB support   Michael Trimarchi
• [U-Boot] [RFC PATCH V2 2/2] Add Freescale ehci USB support   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [RFC PATCH V2 2/3] USB ehci core support   Michael Trimarchi
• [U-Boot] [RFC PATCH V2 3/3] USB ehci freescale support   Michael Trimarchi
• [U-Boot] [RFC PATCH V2] USB style patch, 80 chars strict   Michael Trimarchi
• [U-Boot] [RFC PATCH V2] USB style patch, 80 chars strict   michael
• [U-Boot] [RFC PATCH V3 0/1] USB style patch, 80 chars strict   Michael Trimarchi
• [U-Boot] [RFC PATCH V3 1/1] Remove obsolete command (apply afte USB style patch, 80 chars strict)   Michael Trimarchi
• [U-Boot] [RFC PATCH] USB style patch   Michael Trimarchi
• [U-Boot] [RFC PATCH] USB style patch   Remy Bohmer
• [U-Boot] [RFC PATCH] USB style patch   michael
• [U-Boot] [RFC PATCH] USB style patch   Wolfgang Denk
• [U-Boot] [RFC PATCH] USB style patch   michael
• [U-Boot] [RFC PATCH] USB style patch   Wolfgang Denk
• [U-Boot] [SPAM] D.entists Database for the United States   Russell conclusive
• [U-Boot] [U-Boot-Users] [PATCH 2/4][RFC] Add ehci core functionality   Remy Bohmer
• [U-Boot] [U-boot-Users][GIT PULL] Please pull coldfire tree   John Rigby
• [U-Boot] [U-boot-Users][GIT PULL] Please pull coldfire tree   Wolfgang Denk
• [U-Boot] [U-boot] Export functions using Jumptable in Standalone application   Wolfgang Denk
• [U-Boot] [ubi] Please pull git://www.denx.de/git/u-boot-ubi.git   Stefan Roese
• [U-Boot] [ubi] Please pull git://www.denx.de/git/u-boot-ubi.git   Stefan Roese
• [U-Boot] [ubi] Please pull git://www.denx.de/git/u-boot-ubi.git   Wolfgang Denk
• [U-Boot] [ubi] Please pull git://www.denx.de/git/u-boot-ubi.git   Wolfgang Denk
• [U-Boot] add usb_system_autoupdate command.   Matteo Facchinetti
• [U-Boot] add usb_system_autoupdate command.   Marco Cavallini
• [U-Boot] add usb_system_autoupdate command.   Marco
• [U-Boot] add usb_system_autoupdate command.   Matteo Facchinetti
• [U-Boot] Address Space in Uboot MPC85xx   Vignesh Kumar B
• [U-Boot] Address Space in Uboot MPC85xx   Vignesh Kumar B
• [U-Boot] Address Space in Uboot MPC85xx   Kumar Gala
• [U-Boot] alpr U-Boot image too big   Stefan Roese
• [U-Boot] ARM mach-types.h sync request   Jared Holzman
• [U-Boot] ARM Pull request   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] ARM Pull request   Wolfgang Denk
• [U-Boot] ARM Pull request   Alessandro Rubini
• [U-Boot] ARM pull request   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] ARM pull request   Dirk Behme
• [U-Boot] ARM pull request   Wolfgang Denk
• [U-Boot] Asymmetric Flash JS28F256P33B95   Marco Stornelli
• [U-Boot] AT91 pull request   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] AT91 pull request   Wolfgang Denk
• [U-Boot] AT91 pull request   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] AT91 pull request   Wolfgang Denk
• [U-Boot] AT91RM9200 boots from NOR Flash or not   Jens Scharsig
• [U-Boot] AT91RM9200 boots from NOR Flash or not   Martin Hejnfelt
• [U-Boot] AT91RM9200 boots from NOR Flash or not   Jens Scharsig
• [U-Boot] AT91RM9200 boots from NOR Flash or not   Wolfgang Denk
• [U-Boot] AT91RM9200 boots from NOR Flash or not   Wolfgang Denk
• [U-Boot] AT91RM9200 boots from NOR Flash or not   Jens Scharsig
• [U-Boot] AT91RM9200 boots from NOR Flash or not   Wolfgang Denk
• [U-Boot] AT91RM9200 boots from NOR Flash or not   Pink Boy
• [U-Boot] AT91RM9200 boots from NOR Flash or not   Wolfgang Denk
• [U-Boot] Booting Linux from Memory Hangs   binaryboy
• [U-Boot] Booting zImage on IXP425 BE   Horst Rennfler
• [U-Boot] Booting zImage on IXP425 BE   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] Booting zImage on IXP425 BE   Horst Rennfler
• [U-Boot] Booting zImage on IXP425 BE   Lejin K Joy
• [U-Boot] bootlimit for arm? watchdog?   Frans Meulenbroeks
• [U-Boot] broken lib_arm/boom.c/do_bootm_linux()   Ilko Iliev
• [U-Boot] broken lib_arm/boom.c/do_bootm_linux()   Kumar Gala
• [U-Boot] Broken network for different u-boot compilation   Duy-Ky Nguyen
• [U-Boot] Broken network for different u-boot compilation   Duy-Ky Nguyen
• [U-Boot] Broken network for different u-boot compilation   Sriram Chadalavada
• [U-Boot] Broken network for different u-boot compilation   Wolfgang Denk
• [U-Boot] Building tools without building firmware   Matt Sealey
• [U-Boot] Building tools without building firmware   Mike Frysinger
• [U-Boot] Building tools without building firmware   Matt Sealey
• [U-Boot] Building tools without building firmware   Mike Frysinger
• [U-Boot] Building tools without building firmware   Matt Sealey
• [U-Boot] Building tools without building firmware   Mike Frysinger
• [U-Boot] Building u-boot for the AT91RM9200-EK circa 2008   Pink Boy
• [U-Boot] Building u-boot for the AT91RM9200-EK circa 2008   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] Building u-boot for the AT91RM9200-EK circa 2008   Ulf Samuelsson
• [U-Boot] Building u-boot for the AT91RM9200-EK circa 2008   Pink Boy
• [U-Boot] Building u-boot for the AT91RM9200-EK circa 2008   Martin Hejnfelt
• [U-Boot] Building u-boot for the AT91RM9200-EK circa 2008   Wolfgang Denk
• [U-Boot] Building u-boot for the AT91RM9200-EK circa 2008   Martin Hejnfelt
• [U-Boot] Building u-boot for the AT91RM9200-EK circa 2008   Wolfgang Denk
• [U-Boot] Building u-boot for the AT91RM9200-EK circa 2008   Pink Boy
• [U-Boot] Building u-boot for the AT91RM9200-EK circa 2008   James Black
• [U-Boot] Building u-boot for the AT91RM9200-EK circa 2008   Wolfgang Denk
• [U-Boot] Building u-boot for the AT91RM9200-EK circa 2008   Pink Boy
• [U-Boot] Building u-boot for the AT91RM9200-EK circa 2008   Wolfgang Denk
• [U-Boot] Bus Fault when calling irq_install_handler   k b
• [U-Boot] Bus Fault when calling irq_install_handler   Stefan Roese
• [U-Boot] Can I have a backup boot option ?   Mark Jackson
• [U-Boot] Can I have a backup boot option ?   Wolfgang Denk
• [U-Boot] Can I have a backup boot option ?   Mark Jackson
• [U-Boot] Can I run ELDK on Cygwin   Diptopal Basu
• [U-Boot] Can I run ELDK on Cygwin   Wolfgang Denk
• [U-Boot] CFG_ENV_SECT_SIZE doubt   Marco
• [U-Boot] CFI: flash_write_cfiword() slow   Jens Gehrlein
• [U-Boot] CFI: flash_write_cfiword() slow   Wolfgang Denk
• [U-Boot] Code style questions (weak functions, cpu/ v's lib_arch/)   Mike Frysinger
• [U-Boot] Code style questions (weak functions, cpu/ v's lib_arch/)   Jon Loeliger
• [U-Boot] Code style questions (weak functions, cpu/ v's lib_arch/)   Wolfgang Denk
• [U-Boot] Code style questions (weak functions, cpu/ v's lib_arch/)   Graeme Russ
• [U-Boot] compile error after installing ELDK arm-2007-01-22-uclibc.iso and uboot 1.3.4   Ajit Mittal
• [U-Boot] compile error after installing ELDK arm-2007-01-22-uclibc.iso and uboot 1.3.4   Wolfgang Denk
• [U-Boot] Comprehensive Healthcare List   Alford consistent
• [U-Boot] Confusion in loading of reset configuration words on MPC8360   Elison Niven
• [U-Boot] Confusion in loading of reset configuration words on MPC8360   David Hawkins
• [U-Boot] Creating u-boot-arm-omap3 branch   Dirk Behme
• [U-Boot] Creating u-boot-arm-omap3 branch   Dirk Behme
• [U-Boot] Den Tists Listing for the USA   enoch
• [U-Boot] EHCI patchset   michael
• [U-Boot] EHCI patchset   Stefan Roese
• [U-Boot] EHCI patchset   michael
• [U-Boot] Error compiling UBOOT 1.3.4 for AT91RM9200   Linux RegaTech
• [U-Boot] Export CFI Flash to the MTD and support it in UBI   Piotr Ziecik
• [U-Boot] FDT warning: redefinition of `uintptr_t'   Wolfgang Denk
• [U-Boot] Fix uImage.FIT support for little endian target and non PPC, M68K and SPARC target   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] FROM MISS JOY   Joy Peter
• [U-Boot] gd_t/bd_t on ARM   Daniel Mack
• [U-Boot] gd_t/bd_t on ARM   Remy Bohmer
• [U-Boot] gd_t/bd_t on ARM   Daniel Mack
• [U-Boot] Generic CFI flash driver is not so generic?   Choe, Hyun-ho
• [U-Boot] Generic CFI flash driver is not so generic?   Wolfgang Denk
• [U-Boot] Generic CFI flash driver is not so generic?   Choe, Hyun-ho
• [U-Boot] Generic CFI flash driver is not so generic?   Michael Lawnick
• [U-Boot] Generic CFI flash driver is not so generic?   Choe, Hyun-ho
• [U-Boot] Getting a message no rule to make target .   Diptopal Basu
• [U-Boot] Getting a message no rule to make target .   Remy Bohmer
• [U-Boot] GNU Make shell application   Peter Tyser
• [U-Boot] grep for message   michael
• [U-Boot] grep for message (was: USB style patch)   Alessandro Rubini
• [U-Boot] Hangs up after transferring control to kernel   eliad lubovsky
• [U-Boot] Hangs up after transferring control to kernel   Kumar Gala
• [U-Boot] Hangs up after transferring control to kernel   eliad lubovsky
• [U-Boot] Hangs up after transferring control to kernel   Kumar Gala
• [U-Boot] Hangs up after transferring control to kernel   eliad lubovsky
• [U-Boot] hi   黄钟明
• [U-Boot] How to do serial pages reading in K9f1208u0b-pcb nand chip from SAMSUNG?   yihect
• [U-Boot] IDE and USB error   Carlos kescuin
• [U-Boot] Info on different Versions of U-Boot.   Pithan Prathap
• [U-Boot] Info on different Versions of U-Boot.   Wolfgang Denk
• [U-Boot] Installing ELDK from arm-2006-09-06-uclibc.iso stuck at "1:glib2-devel-arm_trg" futex call on ubuntu 8.1   Wolfgang Denk
• [U-Boot] Installing ELDK from arm-2006-09-06-uclibc.iso stuck at "1:glib2-devel-arm_trg" on ubuntu 8.1   Wolfgang Denk
• [U-Boot] Installing ELDK from arm-2006-09-06-uclibc.iso stuck at "1:glib2-devel-arm_trg" futex call on ubuntu 8.1   Ajit Mittal
• [U-Boot] Installing ELDK from arm-2006-09-06-uclibc.iso stuck at "1:glib2-devel-arm_trg" on ubuntu 8.1   Ajit Mittal
• [U-Boot] Installing Linux kernel, nothing to execute in RAM...   Simon Boman
• [U-Boot] Installing Linux kernel, nothing to execute in RAM...   Simon Boman
• [U-Boot] iPAQ 21x support (+PXA3xx NAND flash and MMC)   Oliver Ford
• [U-Boot] iPAQ 21x support (+PXA3xx NAND flash and MMC)   Daniel Mack
• [U-Boot] IRAM   kishore choudhari
• [U-Boot] IRAM   Anatolij Gustschin
• [U-Boot] IROM NODE   kishore choudhari
• [U-Boot] java virtual machine on embedded systems   Daniel Rodríguez Margareto
• [U-Boot] java virtual machine on embedded systems   Marc Leeman
• [U-Boot] java virtual machine on embedded systems   Jerry Van Baren
• [U-Boot] K9G8G08UM u-boot 1.1.6 saveenv   hjj
• [U-Boot] K9G8G08UM u-boot 1.1.6 saveenv   Wolfgang Denk
• [U-Boot] Linux booting speed up.   Michele Venturi
• [U-Boot] Linux booting speed up.   Wolfgang Denk
• [U-Boot] Linux booting speed up.   Wolfgang Denk
• [U-Boot] Linux booting speed up.   Wolfgang Denk
• [U-Boot] LXT971 ethernet on MCF5485   raul.moreno at telvent.com
• [U-Boot] LXT971 ethernet on MCF5485   Liew Tsi Chung
• [U-Boot] LXT971 ethernet on MCF5485   raul.moreno at telvent.com
• [U-Boot] MAKEALL ml507_flash return "Not enough room forprogramheaders" error   Benny Chen
• [U-Boot] MAKEALL ml507_flash return "Not enough room for programheaders" error   Ricardo
• [U-Boot] MAKEALL ml507_flash return "Not enough room for programheaders" error   Benny Chen
• [U-Boot] MAKEALL ml507_flash return "Not enough room for programheaders" error   Ricardo
• [U-Boot] MAKEALL ml507_flash return "Not enough room for programheaders" error   Benny Chen
• [U-Boot] MAKEALL ml507_flash return "Not enough room for program headers" error   Benny Chen
• [U-Boot] MD List   Sofia antisemitism
• [U-Boot] Medical profession data, many different specialties   Candice importation
• [U-Boot] Merge fixes/clean up outside merge window? was: Re: [PATCH] lib_arm: do_bootm_linux() - correct a small mistake   Wolfgang Denk
• [U-Boot] Merge fixes/clean up outside merge window? was: Re: [PATCH] lib_arm: do_bootm_linux() - correct a small mistake   Dirk Behme
• [U-Boot] Microblaze patches   Michal Simek
• [U-Boot] mini-pci wireless driver   Lance Zhang
• [U-Boot] mini-pci wireless driver   Ben Warren
• [U-Boot] mini-pci wireless driver   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] mini-pci wireless driver   Lance Zhang
• [U-Boot] mini-pci wireless driver   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] mini-pci wireless driver   Lance Zhang
• [U-Boot] mini-pci wireless driver   John W. Linville
• [U-Boot] mini-pci wireless driver   Wolfgang Denk
• [U-Boot] mini-pci wireless driver   LanceZ
• [U-Boot] mini-pci wireless driver   David Hawkins
• [U-Boot] mini-pci wireless driver   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] mini-pci wireless driver   Lance Zhang
• [U-Boot] mini-pci wireless driver   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] mini-pci wireless driver   John W. Linville
• [U-Boot] mini-pci wireless driver   Lance Zhang
• [U-Boot] mkimage warning: ISO C99 requires ...   Wolfgang Denk
• [U-Boot] MMU initialization   A. Geisreiter
• [U-Boot] MMU initialization   A. Geisreiter
• [U-Boot] MPC5200B: Trouble with config pins   Juergen Beisert
• [U-Boot] MPC5200B: Trouble with config pins   Grant Likely
• [U-Boot] MPC5200B: Trouble with config pins   Juergen Beisert
• [U-Boot] MPC5200B: Trouble with config pins   Andre Schwarz
• [U-Boot] MPC5200B: Trouble with config pins   Juergen Beisert
• [U-Boot] MPC5200B: Trouble with config pins   Wolfram Sang
• [U-Boot] MT29F8G08MAAWC support in u-boot   Dimitar Penev
• [U-Boot] mtdparts   Vijay Nikam
• [U-Boot] NAND Flash M5329 Problems   Carlos kescuin
• [U-Boot] Need input: Use Virtual address in commands; add translation/physical   Becky Bruce
• [U-Boot] Need input: Use Virtual address in commands; add translation/physical   Jerry Van Baren
• [U-Boot] Need input: Use Virtual address in commands; add translation/physical   Andrew Dyer
• [U-Boot] Need input: Use Virtual address in commands; add translation/physical   Wolfgang Denk
• [U-Boot] Need input: Use Virtual address in commands; add translation/physical   Wolfgang Denk
• [U-Boot] Need input: Use Virtual address in commands; add translation/physical   Jerry Van Baren
• [U-Boot] Need input: Use Virtual address in commands; add translation/physical   Stefan Roese
• [U-Boot] Need input: Use Virtual address in commands; add translation/physical   Andrew Dyer
• [U-Boot] Need input: Use Virtual address in commands; add translation/physical   Wolfgang Denk
• [U-Boot] New board   Ing.G.Morandi (Portatile)
• [U-Boot] New board   Wolfgang Denk
• [U-Boot] New board   Ing.G.Morandi (Portatile)
• [U-Boot] New board   Wolfgang Denk
• [U-Boot] new board SDRAM conf   조기성
• [U-Boot] new board SDRAM conf   Stefan Roese
• [U-Boot] new board SDRAM conf   조기성
• [U-Boot] new board SDRAM conf   Stefan Roese
• [U-Boot] new board SDRAM conf   조기성
• [U-Boot] new board SDRAM conf   Stefan Roese
• [U-Boot] new board SDRAM conf   조기성
• [U-Boot] new board SDRAM conf   Stefan Roese
• [U-Boot] Newbie problem, all commands become unknown if I call a function   Jon Povey
• [U-Boot] nor flash testing   arun c
• [U-Boot] Not able to access uboot newsgroup from thunderbird   Sriram Chadalavada
• [U-Boot] Not able to access uboot newsgroup from thunderbird   Wolfgang Denk
• [U-Boot] Not able to access uboot newsgroup from thunderbird   Michael Lawnick
• [U-Boot] OMAP3 broken NAND hardware ECC generation   Dirk Behme
• [U-Boot] OMAP3 broken NAND hardware ECC generation   Scott Wood
• [U-Boot] OneNAND: Continuous locking scheme?   Stefan Roese
• [U-Boot] OneNAND: Continuous locking scheme?   Kyungmin Park
• [U-Boot] OneNAND: Continuous locking scheme?   Stefan Roese
• [U-Boot] PATCH add support for cheflux board   Giulio Benetti
• [U-Boot] PATCH add support for cheflux board   Ben Warren
• [U-Boot] PATCH macb fix phy address   Giulio Benetti
• [U-Boot] PATCH macb fix phy address   michael
• [U-Boot] PATCH macb fix phy address   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] PATCH macb fix phy address   Giulio Benetti
• [U-Boot] PATCH macb fix phy address   michael
• [U-Boot] PATCH macb fix phy address   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] PATCH macb fix phy address   Giulio Benetti
• [U-Boot] PATCH: Add support for Toradex Colibri PX270 Modules   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] PATCH: mpc8xx PLPRCR (init_pll_866)   Spencer Putt
• [U-Boot] Patches for in-house board   Jared Holzman
• [U-Boot] Patches for in-house board   Wolfgang Denk
• [U-Boot] PCI405 doesn't build anymore   Stefan Roese
• [U-Boot] PCI405 doesn't build anymore   Matthias Fuchs
• [U-Boot] PHY lib   Michal Simek
• [U-Boot] PHY lib   Ben Warren
• [U-Boot] PHY lib   Wolfgang Denk
• [U-Boot] PHY lib   Wolfgang Grandegger
• [U-Boot] PHY lib   Wolfgang Denk
• [U-Boot] Please pull u-boot-mpc83xx   Kim Phillips
• [U-Boot] Please pull u-boot-mpc83xx   Wolfgang Denk
• [U-Boot] Please remove my name from the mailing list.   Rajneesh Bhardwaj
• [U-Boot] PowerPC 440EP hard-float   Eibach, Dirk
• [U-Boot] PowerPC 440EP hard-float   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] PowerPC 440EP hard-float   Eibach, Dirk
• [U-Boot] PowerPC 440EP hard-float   Wolfgang Denk
• [U-Boot] PowerPC 440EP hard-float   Wolfgang Denk
• [U-Boot] PowerPC 440EP hard-float   Eibach, Dirk
• [U-Boot] PowerPC 440EP hard-float   Eibach, Dirk
• [U-Boot] ppc405ep boot freeze with u-boot 1.3.4   Reto Stalder
• [U-Boot] ppc405ep boot freeze with u-boot 1.3.4   Stefan Roese
• [U-Boot] ppc405ep boot freeze with u-boot 1.3.4   Reto Stalder
• [U-Boot] PPC440EP UART 4port enble   조기성
• [U-Boot] PPC440EP UART 4port enble   Stefan Roese
• [U-Boot] PPC440EP UART 4port enble   조기성
• [U-Boot] PPC440EP UART 4port enble   Stefan Roese
• [U-Boot] PPC440EP USB1.1 Host Error   조기성
• [U-Boot] PPC440EP USB1.1 Host Error   Remy Bohmer
• [U-Boot] ppc4xx: u-boot sees PCIe endpoint, linux does not.   Leon Woestenberg
• [U-Boot] Problems booting without BDI   Alemao
• [U-Boot] Problems booting without BDI   David Hawkins
• [U-Boot] Problems booting without BDI   Ben Warren
• [U-Boot] Problems booting without BDI   David Hawkins
• [U-Boot] program exception trap 700   raj shekar
• [U-Boot] program exception trap 700   raj shekar
• [U-Boot] Pull request - net   Ben Warren
• [U-Boot] Pull request - net   Wolfgang Denk
• [U-Boot] Pull request - net   Ben Warren
• [U-Boot] Pull request u-boot-blackfin.git   Wolfgang Denk
• [U-Boot] Pull request u-boot-blackfin.git   Wolfgang Denk
• [U-Boot] Pull request: nand flash   Wolfgang Denk
• [U-Boot] Pull request: nand flash   Wolfgang Denk
• [U-Boot] Pull request: nand flash   Scott Wood
• [U-Boot] Pull request: u-boot-fdt   Jerry Van Baren
• [U-Boot] Pull request: u-boot-fdt   Wolfgang Denk
• [U-Boot] Pull request: u-boot-fdt   Wolfgang Denk
• [U-Boot] Pull request: u-boot-fdt   Jerry Van Baren
• [U-Boot] Pull Request: u-boot-mpc86xx   Jon Loeliger
• [U-Boot] Pull Request: u-boot-mpc86xx   Wolfgang Denk
• [U-Boot] Pull Request: u-boot-mpc86xx   Jon Loeliger
• [U-Boot] Pull request: u-boot-sh   Wolfgang Denk
• [U-Boot] Pull request: u-boot-sparc   Daniel Hellstrom
• [U-Boot] Question about ARM compiler optimization problem   Choe, Hyun-ho
• [U-Boot] Question about ARM compiler optimization problem   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] Question about ARM compiler optimization problem   Choe, Hyun-ho
• [U-Boot] Question about ARM compiler optimization problem   Choe, Hyun-ho
• [U-Boot] Question about ARM compiler optimization problem   Choe, Hyun-ho
• [U-Boot] question: U-boot linking against libgcc   Haavard Skinnemoen
• [U-Boot] question: U-boot linking against libgcc   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] Re : java virtual machine on embedded systems   Sebastien Jean
• [U-Boot] Regarding uboot   kishore
• [U-Boot] Regarding uboot   Jerry Van Baren
• [U-Boot] Removing suzaku board from U-BOOT   Michal Simek
• [U-Boot] Removing suzaku board from U-BOOT   Yasushi SHOJI
• [U-Boot] Removing suzaku board from U-BOOT   Michal Simek
• [U-Boot] RFC - How to speed up multiplexed input between serial and network?   Gary Jennejohn
• [U-Boot] samsung 1GB nand flash   chandan
• [U-Boot] samsung 1GB nand flash   Scott Wood
• [U-Boot] Simple question about the TEXT_BASE   Chengzhi Li
• [U-Boot] Simple question about the TEXT_BASE   Marco Stornelli
• [U-Boot] TRAP 700 to understand   raj shekar
• [U-Boot] U-Boot bootstrap solution on the ML507 board.   Benny Chen
• [U-Boot] U-boot build failes with armv5tel-reghat-linux-gnueabi-gcc (4.1.2)   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] U-boot build failes with armv5tel-reghat-linux-gnueabi-gcc (4.1.2)   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] U-boot build failes with armv5tel-reghat-linux-gnueabi-gcc (4.1.2)   Prafulla Wadaskar
• [U-Boot] U-boot resets when booting Linux kernel   Simon Boman
• [U-Boot] U-boot resets when booting Linux kernel   Wolfgang Denk
• [U-Boot] U-boot resets when booting Linux kernel   Simon Boman
• [U-Boot] U-boot resets when booting Linux kernel   Wolfgang Denk
• [U-Boot] U-boot resets when booting Linux kernel   Simon Boman
• [U-Boot] U-boot resets when booting Linux kernel   Jerry Van Baren
• [U-Boot] U-boot resets when booting Linux kernel   Simon Boman
• [U-Boot] U-boot resets when booting Linux kernel   Simon Boman
• [U-Boot] U-boot resets when booting Linux kernel   Simon Boman
• [U-Boot] U-boot resets when booting Linux kernel   Jerry Van Baren
• [U-Boot] U-boot resets when booting Linux kernel   Simon Boman
• [U-Boot] U-boot support for Non Console board   rajeev s
• [U-Boot] U-boot support for Non Console board   Ira Snyder
• [U-Boot] U-Boot to load VxWorks   raul.moreno at telvent.com
• [U-Boot] U-Boot to load VxWorks   raul.moreno at telvent.com
• [U-Boot] Uboot 4K Page Jump in MPC85xx   Vignesh Kumar B
• [U-Boot] Uboot Ethernet driver for Broadcom BCM5481 PHY   Matheos Worku
• [U-Boot] Uboot Ethernet driver for Broadcom BCM5481 PHY   Ben Warren
• [U-Boot] Uboot Ethernet driver for Broadcom BCM5481 PHY   Matheos Worku
• [U-Boot] Uboot Ethernet driver for Broadcom BCM5481 PHY   Ben Warren
• [U-Boot] Uboot Ethernet driver for Broadcom BCM5481 PHY   Matheos Worku
• [U-Boot] uboot loading address.   Rajesh Venkataraman
• [U-Boot] Undefined reference to `boot_relocate_fdt'   Juan Pablo Gómez
• [U-Boot] Undefined reference to `boot_relocate_fdt'   Jerry Van Baren
• [U-Boot] Undefined reference to `boot_relocate_fdt'   Michal Simek
• [U-Boot] USB custodianship   Markus Klotzbücher
• [U-Boot] USB custodianship   Stefan Roese
• [U-Boot] USB custodianship   Wolfgang Denk
• [U-Boot] USB custodianship   Markus Klotzbücher
• [U-Boot] USB custodianship   Remy Bohmer
• [U-Boot] USB custodianship   Wolfgang Denk
• [U-Boot] USB custodianship   Markus Klotzbücher
• [U-Boot] virt to phys mapping function   Kumar Gala
• [U-Boot] virt to phys mapping function   Wolfgang Denk
• [U-Boot] weak functions not being over-ridden (location dependent)   Remy Bohmer
• [U-Boot] weak functions not being over-ridden (location dependent)   Wolfgang Denk
• [U-Boot] weak functions not being over-ridden (location dependent)   Graeme Russ
• [U-Boot] weak functions not being over-ridden (location dependent)   Ben Warren
• [U-Boot] weak functions not being over-ridden (location dependent)   Graeme Russ
• [U-Boot] weak functions not being over-ridden (location dependent)   Ben Warren
• [U-Boot] weak functions not being over-ridden (location dependent)   Mike Frysinger
• [U-Boot] weak functions not being over-ridden (location dependent)   Graeme Russ
• [U-Boot] weak functions versus conditional compile   Graeme Russ
• [U-Boot] weak functions versus conditional compile   Mike Frysinger
• [U-Boot] weak functions versus conditional compile   Haavard Skinnemoen
• [U-Boot] weak functions versus conditional compile   Joakim Tjernlund
• [U-Boot] what's wrong when I install ELDK?   AA

Last message date: Sun Nov 30 17:53:24 CET 2008
Archived on: Sun Nov 30 17:53:31 CET 2008

• Messages sorted by: [ thread ] [ author ] [ date ]
• More info on this list...