[U-Boot] [PATCH 2/9] mpc86xx: Move setup_bats into cpu_init_f

[Becky Bruce]

In order to later allow for a physical relocation of the
flash, setup_bats, which sets up the final BAT mapping
for the board, needs to happen *after* init_laws().
Otherwise, there will be no window programmed for the flash
at the new physical location at the point when we change
the mmu translation.

Signed-off-by: Becky Bruce <becky.bruce at freescale.com>
---
 cpu/mpc86xx/cpu_init.c |    4 ++++
 cpu/mpc86xx/start.S    |    5 -----
 2 files changed, 4 insertions(+), 5 deletions(-)

diff --git a/cpu/mpc86xx/cpu_init.c b/cpu/mpc86xx/cpu_init.c
index 06f179c..a7e6036 100644
--- a/cpu/mpc86xx/cpu_init.c
+++ b/cpu/mpc86xx/cpu_init.c
@@ -33,6 +33,8 @@
 #include <asm/fsl_law.h>
 #include "mp.h"
 
+void setup_bats(void);
+
 DECLARE_GLOBAL_DATA_PTR;
 
 /*
@@ -57,6 +59,8 @@ void cpu_init_f(void)
 	init_laws();
 #endif
 
+	setup_bats();
+
 	/* Map banks 0 and 1 to the FLASH banks 0 and 1 at preliminary
 	 * addresses - these have to be modified later when FLASH size
 	 * has been determined
diff --git a/cpu/mpc86xx/start.S b/cpu/mpc86xx/start.S
index 48f8c5a..0d30e91 100644
--- a/cpu/mpc86xx/start.S
+++ b/cpu/mpc86xx/start.S
@@ -272,11 +272,6 @@ in_flash:
 
 	GET_GOT			/* initialize GOT access	*/
 
-	/* setup the rest of the bats */
-	bl      setup_bats
-	sync
-
-
 	/* run low-level CPU init code	   (from Flash) */
 	bl	cpu_init_f
 	sync
-- 
1.5.5.1