[U-Boot] [RFC PATCH 1/1] Add ehci freescale support
Michael Trimarchi
trimarchi at gandalf.sssup.it
Tue Nov 25 13:42:10 CET 2008
Add ehci freescale support
Signed-off-by: Michael Trimarchi <trimarchimichael at yahoo.it>
---
drivers/usb/usb_ehci_fsl.c | 99 ++++++++++++++++++++++++++++++++++++++++++++
drivers/usb/usb_ehci_fsl.h | 82 ++++++++++++++++++++++++++++++++++++
2 files changed, 181 insertions(+), 0 deletions(-)
create mode 100644 drivers/usb/usb_ehci_fsl.c
create mode 100644 drivers/usb/usb_ehci_fsl.h
diff --git a/drivers/usb/usb_ehci_fsl.c b/drivers/usb/usb_ehci_fsl.c
new file mode 100644
index 0000000..da4b273
--- /dev/null
+++ b/drivers/usb/usb_ehci_fsl.c
@@ -0,0 +1,99 @@
+/*
+ * (C) Copyright 2008, Excito Elektronik i Skåne AB
+ *
+ * Author: Tor Krill tor at excito.com
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <pci.h>
+#include <usb.h>
+#include <mpc83xx.h>
+#include <asm/io.h>
+#include <asm/bitops.h>
+
+#include "usb_ehci.h"
+#include "usb_ehci_fsl.h"
+#include "usb_ehci_core.h"
+
+/*
+ * Create the appropriate control structures to manage
+ * a new EHCI host controller.
+ *
+ * Excerpts from linux ehci fsl driver.
+ */
+int ehci_hcd_init(void)
+{
+ volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
+ uint32_t addr, temp;
+
+ addr = (uint32_t)&(im->usb[0]);
+ hccr = (struct ehci_hccr *)(addr + FSL_SKIP_PCI);
+ hcor = (struct ehci_hcor *)((uint32_t) hccr + hccr->cr_caplength);
+
+ /* Configure clock */
+ clrsetbits_be32(&(im->clk.sccr), MPC83XX_SCCR_USB_MASK,
+ MPC83XX_SCCR_USB_DRCM_11);
+
+ /* Confgure interface. */
+ temp = in_be32((void *)(addr + FSL_SOC_USB_CTRL));
+ out_be32((void *)(addr + FSL_SOC_USB_CTRL), temp
+ | REFSEL_16MHZ | UTMI_PHY_EN);
+
+ /* Wait for clock to stabilize */
+ do {
+ temp = in_be32((void *)(addr + FSL_SOC_USB_CTRL));
+ udelay(1000);
+ } while (!(temp & PHY_CLK_VALID));
+
+ /* Set to Host mode */
+ temp = in_le32((void *)(addr + FSL_SOC_USB_USBMODE));
+ out_le32((void *)(addr + FSL_SOC_USB_USBMODE), temp | CM_HOST);
+
+ out_be32((void *)(addr + FSL_SOC_USB_SNOOP1), SNOOP_SIZE_2GB);
+ out_be32((void *)(addr + FSL_SOC_USB_SNOOP2),
+ 0x80000000 | SNOOP_SIZE_2GB);
+
+ /* Init phy */
+ /* TODO: handle different phys? */
+ out_le32(&(hcor->or_portsc[0]), PORT_PTS_UTMI);
+
+ /* Enable interface. */
+ temp = in_be32((void *)(addr + FSL_SOC_USB_CTRL));
+ out_be32((void *)(addr + FSL_SOC_USB_CTRL), temp | USB_EN);
+
+ out_be32((void *)(addr + FSL_SOC_USB_PRICTRL), 0x0000000c);
+ out_be32((void *)(addr + FSL_SOC_USB_AGECNTTHRSH), 0x00000040);
+ out_be32((void *)(addr + FSL_SOC_USB_SICTRL), 0x00000001);
+
+ /* Enable interface. */
+ temp = in_be32((void *)(addr + FSL_SOC_USB_CTRL));
+ out_be32((void *)(addr + FSL_SOC_USB_CTRL), temp | USB_EN);
+
+ temp = in_le32((void *)(addr + FSL_SOC_USB_USBMODE));
+
+ return 0;
+}
+
+/*
+ * Destroy the appropriate control structures corresponding
+ * the the EHCI host controller.
+ */
+int ehci_hcd_stop(void)
+{
+ return 0;
+}
diff --git a/drivers/usb/usb_ehci_fsl.h b/drivers/usb/usb_ehci_fsl.h
new file mode 100644
index 0000000..829dbf3
--- /dev/null
+++ b/drivers/usb/usb_ehci_fsl.h
@@ -0,0 +1,82 @@
+/* Copyright (c) 2005 freescale semiconductor
+ * Copyright (c) 2005 MontaVista Software
+ * Copyright (c) 2008 Excito Elektronik i Skåne AB
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#ifndef _EHCI_FSL_H
+#define _EHCI_FSL_H
+/* Global offsets */
+#define FSL_SKIP_PCI 0x100
+
+/* offsets for the non-ehci registers in the FSL SOC USB controller */
+#define FSL_SOC_USB_ULPIVP 0x170
+#define FSL_SOC_USB_PORTSC1 0x184
+#define PORT_PTS_MSK (3<<30)
+#define PORT_PTS_UTMI (0<<30)
+#define PORT_PTS_ULPI (2<<30)
+#define PORT_PTS_SERIAL (3<<30)
+#define PORT_PTS_PTW (1<<28)
+
+/* USBMODE Register bits */
+#define CM_IDLE (0<<0)
+#define CM_RESERVED (1<<0)
+#define CM_DEVICE (2<<0)
+#define CM_HOST (3<<0)
+#define USBMODE_RESERVED_2 (0<<2)
+#define SLOM (1<<3)
+#define SDIS (1<<4)
+
+/* CONTROL Register bits */
+#define ULPI_INT_EN (1<<0)
+#define WU_INT_EN (1<<1)
+#define USB_EN (1<<2)
+#define LSF_EN (1<<3)
+#define KEEP_OTG_ON (1<<4)
+#define OTG_PORT (1<<5)
+#define REFSEL_12MHZ (0<<6)
+#define REFSEL_16MHZ (1<<6)
+#define REFSEL_48MHZ (2<<6)
+#define PLL_RESET (1<<8)
+#define UTMI_PHY_EN (1<<9)
+#define PHY_CLK_SEL_UTMI (0<<10)
+#define PHY_CLK_SEL_ULPI (1<<10)
+#define CLKIN_SEL_USB_CLK (0<<11)
+#define CLKIN_SEL_USB_CLK2 (1<<11)
+#define CLKIN_SEL_SYS_CLK (2<<11)
+#define CLKIN_SEL_SYS_CLK2 (3<<11)
+#define RESERVED_18 (0<<13)
+#define RESERVED_17 (0<<14)
+#define RESERVED_16 (0<<15)
+#define WU_INT (1<<16)
+#define PHY_CLK_VALID (1<<17)
+
+#define FSL_SOC_USB_PORTSC2 0x188
+#define FSL_SOC_USB_USBMODE 0x1a8
+#define FSL_SOC_USB_SNOOP1 0x400 /* NOTE: big-endian */
+#define FSL_SOC_USB_SNOOP2 0x404 /* NOTE: big-endian */
+#define FSL_SOC_USB_AGECNTTHRSH 0x408 /* NOTE: big-endian */
+#define FSL_SOC_USB_PRICTRL 0x40c /* NOTE: big-endian */
+#define FSL_SOC_USB_SICTRL 0x410 /* NOTE: big-endian */
+#define FSL_SOC_USB_CTRL 0x500 /* NOTE: big-endian */
+#define SNOOP_SIZE_2GB 0x1e
+
+/* System Clock Control Register */
+#define MPC83XX_SCCR_USB_MASK 0x00f00000
+#define MPC83XX_SCCR_USB_DRCM_11 0x00300000
+#define MPC83XX_SCCR_USB_DRCM_01 0x00100000
+#define MPC83XX_SCCR_USB_DRCM_10 0x00200000
+
+#endif /* _EHCI_FSL_H */
--
1.5.6.5
More information about the U-Boot
mailing list