[U-Boot] [PATCH] Bits reversed in ppc4xx.h

[Steven A. Falco]

The bits in ppc440.h for the SDR0_DDRCFG register are incorrect.  The
register is numbered in big-endian mode, so for example, the LT2 bit
(bit 23) should be represented as 0x00000100 rather than 0x01000000.

Signed-off-by: Steven A. Falco <sfalco at harris.com>
---

diff --git a/include/ppc440.h b/include/ppc440.h
index c581f1b..520b0d9 100644
--- a/include/ppc440.h
+++ b/include/ppc440.h
@@ -174,13 +174,13 @@
 #define sdr_ddrdl	0x00e0
 #else
 #define sdr_cfg		0x00e0
-#define SDR_CFG_LT2_MASK          0x01000000 /* Leakage test 2*/
-#define SDR_CFG_64_32BITS_MASK    0x01000000 /* Switch DDR 64 bits or 32 bits */
+#define SDR_CFG_LT2_MASK          0x00000100 /* Leakage test 2*/
+#define SDR_CFG_64_32BITS_MASK    0x00000080 /* Switch DDR 64 bits or 32 bits */
 #define SDR_CFG_32BITS            0x00000000  /* 32 bits */
-#define SDR_CFG_64BITS            0x01000000  /* 64 bits */
-#define SDR_CFG_MC_V2518_MASK     0x02000000 /* Low VDD2518 (2.5 or 1.8V) */
+#define SDR_CFG_64BITS            0x00000080  /* 64 bits */
+#define SDR_CFG_MC_V2518_MASK     0x00000040 /* Low VDD2518 (2.5 or 1.8V) */
 #define SDR_CFG_MC_V25            0x00000000  /* 2.5 V */
-#define SDR_CFG_MC_V18            0x02000000  /* 1.8 V */
+#define SDR_CFG_MC_V18            0x00000040  /* 1.8 V */
 #endif /* !defined(CONFIG_440EPX) && !defined(CONFIG_440GRX) */
 #define sdr_ebc		0x0100
 #define sdr_uart0	0x0120	/* UART0 Config */
-- 
1.6.0.2