[U-Boot] Simple question about the TEXT_BASE

[Marco Stornelli]

TEXT_BASE is, in a general and coarse way, the address where the Uboot
starts from the flash. For ARM architecture, instead, it's the
relocation address, i.e. the ram address where the uboot relocates itself.

Chengzhi Li ha scritto:
> Hi everyone:
>     I am a freshman in the embedded development area. I have a simple
> question about the TEXT_BASE. When I port the Das U-Boot to my S3C2440
> board, I found that the TEXT_BASE equal to 0x33F8000 which is seen in the
> u-boot-xxx/board/smdk2410/config.mk. I want to know the function of this
> value and why this one be 0x33F8000. And, is this one changeable.Thanks for
> your kindly help! I am looking forward to your response!
> 
> Yours Lee
> 
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot

-- 
Marco Stornelli
Embedded Software Engineer
CoRiTeL - Consorzio di Ricerca sulle Telecomunicazioni
http://www.coritel.it

marco.stornelli at coritel.it
+39 06 72582838