[U-Boot] [PATCH 8/9] mpc8641: Change 32-bit memory map

[Jon Loeliger]

On Wed, 2008-11-05 at 14:55 -0600, Becky Bruce wrote:
> The memory map on the 8641hpcn is modified to look more like
> the 85xx boards; this is a step towards a more standardized
> layout going forward. As part of this change, we now relocate
> the flash.
> 
> The regions for some of the mappings were far larger than they
> needed to be.  I have reduced the mappings to match the
> actual sizes supported by the hardware.
> 
> In addition I have removed the comments at the head
> of the BAT blocks in the config file, rather than updating
> them.  These get horribly out of date, and it's a simple
> matter to look at the defines to see what they are set to
> since everything is right here in the same file.
> 
> Signed-off-by: Becky Bruce <becky.bruce at freescale.com>
> ---
>  board/freescale/mpc8641hpcn/config.mk |    2 +-
>  board/freescale/mpc8641hpcn/law.c     |   23 ++++++----
>  cpu/mpc86xx/start.S                   |    2 +-
>  include/configs/MPC8641HPCN.h         |   76 +++++++++++++++++----------------
>  4 files changed, 54 insertions(+), 49 deletions(-)

Does this affect any flash addresses mentioned in
the README.mpc86xx too?

jdl