[U-Boot] [PATCH 0/6] Updates for atevk1100 support

[Gunnar Rangoy]

These patches makes it possible to load code into external SRAM on
the atevk1100. 

Also included is a patch to use the internal flash. Before this can be
done, U-Boot must be relocated to SRAM.

The GPIO implementation is made cpu dependent due to differences between
at32uc and ap700x.


Gunnar Rangoy (6):
  AVR32: Make GPIO implmentation cpu dependent
  AVR32: Support for external SRAM on at32uc3
  AVR32: Use SRAM as main memory on the atevk1100 board
  AVR32: Enable relocation of code for at32uc3
  AVR32: Support for writing to internal flash on at32uc3
  AVR32: Set boot parameters for atevk1100

 board/atmel/atevk1100/atevk1100.c               |   65 +++++++++-----
 board/atmel/atevk1100/u-boot.lds                |    2 -
 cpu/at32uc/Makefile                             |    1 +
 cpu/at32uc/flashc.c                             |   69 ++++++++++++++-
 cpu/at32uc/flashc.h                             |   17 ++++
 cpu/at32uc/portmux-gpio.c                       |   30 -------
 cpu/at32uc/smc.c                                |   61 +++++++++++++
 cpu/at32uc/smc.h                                |  105 +++++++++++++++++++++++
 cpu/at32uc/start.S                              |   15 +---
 include/asm-avr32/arch-at32ap700x/gpio-impl.h   |   86 ++++++++++++++++++
 include/asm-avr32/arch-at32uc3a0xxx/gpio-impl.h |   62 +++++++++++++
 include/asm-avr32/arch-common/portmux-gpio.h    |   83 +-----------------
 include/asm-avr32/sram.h                        |   34 +++++++
 include/configs/atevk1100.h                     |   22 +++--
 lib_avr32/board.c                               |    5 -
 15 files changed, 490 insertions(+), 167 deletions(-)
 create mode 100644 cpu/at32uc/smc.c
 create mode 100644 cpu/at32uc/smc.h
 create mode 100644 include/asm-avr32/arch-at32ap700x/gpio-impl.h
 create mode 100644 include/asm-avr32/arch-at32uc3a0xxx/gpio-impl.h
 create mode 100644 include/asm-avr32/sram.h