[U-Boot] [PATCH 00/13 v5] ARM: OMAP3: Add support for some of TIs ARM-Cortex A8 OMAP3 boards

[Dirk Behme]

Jean-Christophe PLAGNIOL-VILLARD wrote:
> On 19:34 Sun 02 Nov     , dirk.behme at googlemail.com wrote:
> 
>>Subject: [PATCH 00/13 v5] ARM: OMAP3: Add support for some of TIs ARM-Cortex A8 OMAP3 boards
>>
>>This patch series adds U-Boot v1 support for some of TI's ARM-Cortex A8 based OMAP3 boards. These are BeagleBoard [1][2], EVM [3] and Overo [4].
>>
>>The patch series is based on U-Boot tar ball [5] for BeagleBoard and EVM done by several TI employees.
>>
>>To be able to easily add new boards, most of the code is common for all boards. After the header files (patches 1-2) and the common code for ARM Cortex A8 (patch 3) and OMAP3 SoC (patches 4-6), support and drivers for NAND, MMC and I2C is added (patches 7-9). Patches 10-12 introduce the individual board support for Beagle, EVM and Overo, and last patch 13 the config files for these boards. 
>>
>>As discussed earlier on this list, we compile for armv5 to be compatible with existing toolchains.
>>
>>This patch adds ~300k of new code.
>>
>>Thanks to
>>
>>Steve Sakoman <sakoman at gmail.com>
>>Pillai, Manikandan <mani.pillai at ti.com>
>>Syed Mohammed, Khasim <khasim at ti.com>
>>Nishanth Menon <nm at ti.com>
>>
>>and all others who helped with this.
> 
> 
> As planned patch set applied to omap3 branch

Thanks!

Will start the next days to send style patches for the old and new 
comments (thanks!). I heard that some people prepare patches for fixes 
and new features, too.

Regards

Dirk