[U-Boot] [PATCH 01/13 v5] ARM: OMAP3: Add pin mux, clock and cpu headers
dirk.behme at googlemail.com
dirk.behme at googlemail.com
Sun Nov 2 19:35:04 CET 2008
Subject: [PATCH 01/13 v5] ARM: OMAP3: Add pin mux, clock and cpu headers
From: Dirk Behme <dirk.behme at gmail.com>
Add pin mux, clock and cpu header files for OMAP3.
Signed-off-by: Dirk Behme <dirk.behme at gmail.com>
---
Changes in version v5:
- Additonal space changes as proposed by Jean-Christophe PLAGNIOL-VILLARD
Changes in version v3:
- Replace space by tabs in headers as proposed by Jean-Christophe PLAGNIOL-VILLARD
include/asm-arm/arch-omap3/bits.h | 48 +++
include/asm-arm/arch-omap3/clocks.h | 62 ++++
include/asm-arm/arch-omap3/clocks_omap3.h | 101 +++++++
include/asm-arm/arch-omap3/cpu.h | 256 ++++++++++++++++++
include/asm-arm/arch-omap3/mux.h | 412 ++++++++++++++++++++++++++++++
5 files changed, 879 insertions(+)
Index: u-boot-main/include/asm-arm/arch-omap3/mux.h
===================================================================
--- /dev/null
+++ u-boot-main/include/asm-arm/arch-omap3/mux.h
@@ -0,0 +1,412 @@
+/*
+ * (C) Copyright 2006-2008
+ * Texas Instruments, <www.ti.com>
+ * Syed Mohammed Khasim <x0khasim at ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef _MUX_H_
+#define _MUX_H_
+
+/*
+ * IEN - Input Enable
+ * IDIS - Input Disable
+ * PTD - Pull type Down
+ * PTU - Pull type Up
+ * DIS - Pull type selection is inactive
+ * EN - Pull type selection is active
+ * M0 - Mode 0
+ */
+
+#define IEN (1 << 8)
+
+#define IDIS (0 << 8)
+#define PTU (1 << 4)
+#define PTD (0 << 4)
+#define EN (1 << 3)
+#define DIS (0 << 3)
+
+#define M0 0
+#define M1 1
+#define M2 2
+#define M3 3
+#define M4 4
+#define M5 5
+#define M6 6
+#define M7 7
+
+/*
+ * To get the actual address the offset has to added
+ * with OMAP34XX_CTRL_BASE to get the actual address
+ */
+
+/*SDRC*/
+#define CONTROL_PADCONF_SDRC_D0 0x0030
+#define CONTROL_PADCONF_SDRC_D1 0x0032
+#define CONTROL_PADCONF_SDRC_D2 0x0034
+#define CONTROL_PADCONF_SDRC_D3 0x0036
+#define CONTROL_PADCONF_SDRC_D4 0x0038
+#define CONTROL_PADCONF_SDRC_D5 0x003A
+#define CONTROL_PADCONF_SDRC_D6 0x003C
+#define CONTROL_PADCONF_SDRC_D7 0x003E
+#define CONTROL_PADCONF_SDRC_D8 0x0040
+#define CONTROL_PADCONF_SDRC_D9 0x0042
+#define CONTROL_PADCONF_SDRC_D10 0x0044
+#define CONTROL_PADCONF_SDRC_D11 0x0046
+#define CONTROL_PADCONF_SDRC_D12 0x0048
+#define CONTROL_PADCONF_SDRC_D13 0x004A
+#define CONTROL_PADCONF_SDRC_D14 0x004C
+#define CONTROL_PADCONF_SDRC_D15 0x004E
+#define CONTROL_PADCONF_SDRC_D16 0x0050
+#define CONTROL_PADCONF_SDRC_D17 0x0052
+#define CONTROL_PADCONF_SDRC_D18 0x0054
+#define CONTROL_PADCONF_SDRC_D19 0x0056
+#define CONTROL_PADCONF_SDRC_D20 0x0058
+#define CONTROL_PADCONF_SDRC_D21 0x005A
+#define CONTROL_PADCONF_SDRC_D22 0x005C
+#define CONTROL_PADCONF_SDRC_D23 0x005E
+#define CONTROL_PADCONF_SDRC_D24 0x0060
+#define CONTROL_PADCONF_SDRC_D25 0x0062
+#define CONTROL_PADCONF_SDRC_D26 0x0064
+#define CONTROL_PADCONF_SDRC_D27 0x0066
+#define CONTROL_PADCONF_SDRC_D28 0x0068
+#define CONTROL_PADCONF_SDRC_D29 0x006A
+#define CONTROL_PADCONF_SDRC_D30 0x006C
+#define CONTROL_PADCONF_SDRC_D31 0x006E
+#define CONTROL_PADCONF_SDRC_CLK 0x0070
+#define CONTROL_PADCONF_SDRC_DQS0 0x0072
+#define CONTROL_PADCONF_SDRC_DQS1 0x0074
+#define CONTROL_PADCONF_SDRC_DQS2 0x0076
+#define CONTROL_PADCONF_SDRC_DQS3 0x0078
+/*GPMC*/
+#define CONTROL_PADCONF_GPMC_A1 0x007A
+#define CONTROL_PADCONF_GPMC_A2 0x007C
+#define CONTROL_PADCONF_GPMC_A3 0x007E
+#define CONTROL_PADCONF_GPMC_A4 0x0080
+#define CONTROL_PADCONF_GPMC_A5 0x0082
+#define CONTROL_PADCONF_GPMC_A6 0x0084
+#define CONTROL_PADCONF_GPMC_A7 0x0086
+#define CONTROL_PADCONF_GPMC_A8 0x0088
+#define CONTROL_PADCONF_GPMC_A9 0x008A
+#define CONTROL_PADCONF_GPMC_A10 0x008C
+#define CONTROL_PADCONF_GPMC_D0 0x008E
+#define CONTROL_PADCONF_GPMC_D1 0x0090
+#define CONTROL_PADCONF_GPMC_D2 0x0092
+#define CONTROL_PADCONF_GPMC_D3 0x0094
+#define CONTROL_PADCONF_GPMC_D4 0x0096
+#define CONTROL_PADCONF_GPMC_D5 0x0098
+#define CONTROL_PADCONF_GPMC_D6 0x009A
+#define CONTROL_PADCONF_GPMC_D7 0x009C
+#define CONTROL_PADCONF_GPMC_D8 0x009E
+#define CONTROL_PADCONF_GPMC_D9 0x00A0
+#define CONTROL_PADCONF_GPMC_D10 0x00A2
+#define CONTROL_PADCONF_GPMC_D11 0x00A4
+#define CONTROL_PADCONF_GPMC_D12 0x00A6
+#define CONTROL_PADCONF_GPMC_D13 0x00A8
+#define CONTROL_PADCONF_GPMC_D14 0x00AA
+#define CONTROL_PADCONF_GPMC_D15 0x00AC
+#define CONTROL_PADCONF_GPMC_NCS0 0x00AE
+#define CONTROL_PADCONF_GPMC_NCS1 0x00B0
+#define CONTROL_PADCONF_GPMC_NCS2 0x00B2
+#define CONTROL_PADCONF_GPMC_NCS3 0x00B4
+#define CONTROL_PADCONF_GPMC_NCS4 0x00B6
+#define CONTROL_PADCONF_GPMC_NCS5 0x00B8
+#define CONTROL_PADCONF_GPMC_NCS6 0x00BA
+#define CONTROL_PADCONF_GPMC_NCS7 0x00BC
+#define CONTROL_PADCONF_GPMC_CLK 0x00BE
+#define CONTROL_PADCONF_GPMC_NADV_ALE 0x00C0
+#define CONTROL_PADCONF_GPMC_NOE 0x00C2
+#define CONTROL_PADCONF_GPMC_NWE 0x00C4
+#define CONTROL_PADCONF_GPMC_NBE0_CLE 0x00C6
+#define CONTROL_PADCONF_GPMC_NBE1 0x00C8
+#define CONTROL_PADCONF_GPMC_NWP 0x00CA
+#define CONTROL_PADCONF_GPMC_WAIT0 0x00CC
+#define CONTROL_PADCONF_GPMC_WAIT1 0x00CE
+#define CONTROL_PADCONF_GPMC_WAIT2 0x00D0
+#define CONTROL_PADCONF_GPMC_WAIT3 0x00D2
+/*DSS*/
+#define CONTROL_PADCONF_DSS_PCLK 0x00D4
+#define CONTROL_PADCONF_DSS_HSYNC 0x00D6
+#define CONTROL_PADCONF_DSS_VSYNC 0x00D8
+#define CONTROL_PADCONF_DSS_ACBIAS 0x00DA
+#define CONTROL_PADCONF_DSS_DATA0 0x00DC
+#define CONTROL_PADCONF_DSS_DATA1 0x00DE
+#define CONTROL_PADCONF_DSS_DATA2 0x00E0
+#define CONTROL_PADCONF_DSS_DATA3 0x00E2
+#define CONTROL_PADCONF_DSS_DATA4 0x00E4
+#define CONTROL_PADCONF_DSS_DATA5 0x00E6
+#define CONTROL_PADCONF_DSS_DATA6 0x00E8
+#define CONTROL_PADCONF_DSS_DATA7 0x00EA
+#define CONTROL_PADCONF_DSS_DATA8 0x00EC
+#define CONTROL_PADCONF_DSS_DATA9 0x00EE
+#define CONTROL_PADCONF_DSS_DATA10 0x00F0
+#define CONTROL_PADCONF_DSS_DATA11 0x00F2
+#define CONTROL_PADCONF_DSS_DATA12 0x00F4
+#define CONTROL_PADCONF_DSS_DATA13 0x00F6
+#define CONTROL_PADCONF_DSS_DATA14 0x00F8
+#define CONTROL_PADCONF_DSS_DATA15 0x00FA
+#define CONTROL_PADCONF_DSS_DATA16 0x00FC
+#define CONTROL_PADCONF_DSS_DATA17 0x00FE
+#define CONTROL_PADCONF_DSS_DATA18 0x0100
+#define CONTROL_PADCONF_DSS_DATA19 0x0102
+#define CONTROL_PADCONF_DSS_DATA20 0x0104
+#define CONTROL_PADCONF_DSS_DATA21 0x0106
+#define CONTROL_PADCONF_DSS_DATA22 0x0108
+#define CONTROL_PADCONF_DSS_DATA23 0x010A
+/*CAMERA*/
+#define CONTROL_PADCONF_CAM_HS 0x010C
+#define CONTROL_PADCONF_CAM_VS 0x010E
+#define CONTROL_PADCONF_CAM_XCLKA 0x0110
+#define CONTROL_PADCONF_CAM_PCLK 0x0112
+#define CONTROL_PADCONF_CAM_FLD 0x0114
+#define CONTROL_PADCONF_CAM_D0 0x0116
+#define CONTROL_PADCONF_CAM_D1 0x0118
+#define CONTROL_PADCONF_CAM_D2 0x011A
+#define CONTROL_PADCONF_CAM_D3 0x011C
+#define CONTROL_PADCONF_CAM_D4 0x011E
+#define CONTROL_PADCONF_CAM_D5 0x0120
+#define CONTROL_PADCONF_CAM_D6 0x0122
+#define CONTROL_PADCONF_CAM_D7 0x0124
+#define CONTROL_PADCONF_CAM_D8 0x0126
+#define CONTROL_PADCONF_CAM_D9 0x0128
+#define CONTROL_PADCONF_CAM_D10 0x012A
+#define CONTROL_PADCONF_CAM_D11 0x012C
+#define CONTROL_PADCONF_CAM_XCLKB 0x012E
+#define CONTROL_PADCONF_CAM_WEN 0x0130
+#define CONTROL_PADCONF_CAM_STROBE 0x0132
+#define CONTROL_PADCONF_CSI2_DX0 0x0134
+#define CONTROL_PADCONF_CSI2_DY0 0x0136
+#define CONTROL_PADCONF_CSI2_DX1 0x0138
+#define CONTROL_PADCONF_CSI2_DY1 0x013A
+/*Audio Interface */
+#define CONTROL_PADCONF_MCBSP2_FSX 0x013C
+#define CONTROL_PADCONF_MCBSP2_CLKX 0x013E
+#define CONTROL_PADCONF_MCBSP2_DR 0x0140
+#define CONTROL_PADCONF_MCBSP2_DX 0x0142
+#define CONTROL_PADCONF_MMC1_CLK 0x0144
+#define CONTROL_PADCONF_MMC1_CMD 0x0146
+#define CONTROL_PADCONF_MMC1_DAT0 0x0148
+#define CONTROL_PADCONF_MMC1_DAT1 0x014A
+#define CONTROL_PADCONF_MMC1_DAT2 0x014C
+#define CONTROL_PADCONF_MMC1_DAT3 0x014E
+#define CONTROL_PADCONF_MMC1_DAT4 0x0150
+#define CONTROL_PADCONF_MMC1_DAT5 0x0152
+#define CONTROL_PADCONF_MMC1_DAT6 0x0154
+#define CONTROL_PADCONF_MMC1_DAT7 0x0156
+/*Wireless LAN */
+#define CONTROL_PADCONF_MMC2_CLK 0x0158
+#define CONTROL_PADCONF_MMC2_CMD 0x015A
+#define CONTROL_PADCONF_MMC2_DAT0 0x015C
+#define CONTROL_PADCONF_MMC2_DAT1 0x015E
+#define CONTROL_PADCONF_MMC2_DAT2 0x0160
+#define CONTROL_PADCONF_MMC2_DAT3 0x0162
+#define CONTROL_PADCONF_MMC2_DAT4 0x0164
+#define CONTROL_PADCONF_MMC2_DAT5 0x0166
+#define CONTROL_PADCONF_MMC2_DAT6 0x0168
+#define CONTROL_PADCONF_MMC2_DAT7 0x016A
+/*Bluetooth*/
+#define CONTROL_PADCONF_MCBSP3_DX 0x016C
+#define CONTROL_PADCONF_MCBSP3_DR 0x016E
+#define CONTROL_PADCONF_MCBSP3_CLKX 0x0170
+#define CONTROL_PADCONF_MCBSP3_FSX 0x0172
+#define CONTROL_PADCONF_UART2_CTS 0x0174
+#define CONTROL_PADCONF_UART2_RTS 0x0176
+#define CONTROL_PADCONF_UART2_TX 0x0178
+#define CONTROL_PADCONF_UART2_RX 0x017A
+/*Modem Interface */
+#define CONTROL_PADCONF_UART1_TX 0x017C
+#define CONTROL_PADCONF_UART1_RTS 0x017E
+#define CONTROL_PADCONF_UART1_CTS 0x0180
+#define CONTROL_PADCONF_UART1_RX 0x0182
+#define CONTROL_PADCONF_MCBSP4_CLKX 0x0184
+#define CONTROL_PADCONF_MCBSP4_DR 0x0186
+#define CONTROL_PADCONF_MCBSP4_DX 0x0188
+#define CONTROL_PADCONF_MCBSP4_FSX 0x018A
+#define CONTROL_PADCONF_MCBSP1_CLKR 0x018C
+#define CONTROL_PADCONF_MCBSP1_FSR 0x018E
+#define CONTROL_PADCONF_MCBSP1_DX 0x0190
+#define CONTROL_PADCONF_MCBSP1_DR 0x0192
+#define CONTROL_PADCONF_MCBSP_CLKS 0x0194
+#define CONTROL_PADCONF_MCBSP1_FSX 0x0196
+#define CONTROL_PADCONF_MCBSP1_CLKX 0x0198
+/*Serial Interface*/
+#define CONTROL_PADCONF_UART3_CTS_RCTX 0x019A
+#define CONTROL_PADCONF_UART3_RTS_SD 0x019C
+#define CONTROL_PADCONF_UART3_RX_IRRX 0x019E
+#define CONTROL_PADCONF_UART3_TX_IRTX 0x01A0
+#define CONTROL_PADCONF_HSUSB0_CLK 0x01A2
+#define CONTROL_PADCONF_HSUSB0_STP 0x01A4
+#define CONTROL_PADCONF_HSUSB0_DIR 0x01A6
+#define CONTROL_PADCONF_HSUSB0_NXT 0x01A8
+#define CONTROL_PADCONF_HSUSB0_DATA0 0x01AA
+#define CONTROL_PADCONF_HSUSB0_DATA1 0x01AC
+#define CONTROL_PADCONF_HSUSB0_DATA2 0x01AE
+#define CONTROL_PADCONF_HSUSB0_DATA3 0x01B0
+#define CONTROL_PADCONF_HSUSB0_DATA4 0x01B2
+#define CONTROL_PADCONF_HSUSB0_DATA5 0x01B4
+#define CONTROL_PADCONF_HSUSB0_DATA6 0x01B6
+#define CONTROL_PADCONF_HSUSB0_DATA7 0x01B8
+#define CONTROL_PADCONF_I2C1_SCL 0x01BA
+#define CONTROL_PADCONF_I2C1_SDA 0x01BC
+#define CONTROL_PADCONF_I2C2_SCL 0x01BE
+#define CONTROL_PADCONF_I2C2_SDA 0x01C0
+#define CONTROL_PADCONF_I2C3_SCL 0x01C2
+#define CONTROL_PADCONF_I2C3_SDA 0x01C4
+#define CONTROL_PADCONF_I2C4_SCL 0x0A00
+#define CONTROL_PADCONF_I2C4_SDA 0x0A02
+#define CONTROL_PADCONF_HDQ_SIO 0x01C6
+#define CONTROL_PADCONF_MCSPI1_CLK 0x01C8
+#define CONTROL_PADCONF_MCSPI1_SIMO 0x01CA
+#define CONTROL_PADCONF_MCSPI1_SOMI 0x01CC
+#define CONTROL_PADCONF_MCSPI1_CS0 0x01CE
+#define CONTROL_PADCONF_MCSPI1_CS1 0x01D0
+#define CONTROL_PADCONF_MCSPI1_CS2 0x01D2
+#define CONTROL_PADCONF_MCSPI1_CS3 0x01D4
+#define CONTROL_PADCONF_MCSPI2_CLK 0x01D6
+#define CONTROL_PADCONF_MCSPI2_SIMO 0x01D8
+#define CONTROL_PADCONF_MCSPI2_SOMI 0x01DA
+#define CONTROL_PADCONF_MCSPI2_CS0 0x01DC
+#define CONTROL_PADCONF_MCSPI2_CS1 0x01DE
+/*Control and debug */
+#define CONTROL_PADCONF_SYS_32K 0x0A04
+#define CONTROL_PADCONF_SYS_CLKREQ 0x0A06
+#define CONTROL_PADCONF_SYS_NIRQ 0x01E0
+#define CONTROL_PADCONF_SYS_BOOT0 0x0A0A
+#define CONTROL_PADCONF_SYS_BOOT1 0x0A0C
+#define CONTROL_PADCONF_SYS_BOOT2 0x0A0E
+#define CONTROL_PADCONF_SYS_BOOT3 0x0A10
+#define CONTROL_PADCONF_SYS_BOOT4 0x0A12
+#define CONTROL_PADCONF_SYS_BOOT5 0x0A14
+#define CONTROL_PADCONF_SYS_BOOT6 0x0A16
+#define CONTROL_PADCONF_SYS_OFF_MODE 0x0A18
+#define CONTROL_PADCONF_SYS_CLKOUT1 0x0A1A
+#define CONTROL_PADCONF_SYS_CLKOUT2 0x01E2
+#define CONTROL_PADCONF_JTAG_nTRST 0x0A1C
+#define CONTROL_PADCONF_JTAG_TCK 0x0A1E
+#define CONTROL_PADCONF_JTAG_TMS 0x0A20
+#define CONTROL_PADCONF_JTAG_TDI 0x0A22
+#define CONTROL_PADCONF_JTAG_EMU0 0x0A24
+#define CONTROL_PADCONF_JTAG_EMU1 0x0A26
+#define CONTROL_PADCONF_ETK_CLK 0x0A28
+#define CONTROL_PADCONF_ETK_CTL 0x0A2A
+#define CONTROL_PADCONF_ETK_D0 0x0A2C
+#define CONTROL_PADCONF_ETK_D1 0x0A2E
+#define CONTROL_PADCONF_ETK_D2 0x0A30
+#define CONTROL_PADCONF_ETK_D3 0x0A32
+#define CONTROL_PADCONF_ETK_D4 0x0A34
+#define CONTROL_PADCONF_ETK_D5 0x0A36
+#define CONTROL_PADCONF_ETK_D6 0x0A38
+#define CONTROL_PADCONF_ETK_D7 0x0A3A
+#define CONTROL_PADCONF_ETK_D8 0x0A3C
+#define CONTROL_PADCONF_ETK_D9 0x0A3E
+#define CONTROL_PADCONF_ETK_D10 0x0A40
+#define CONTROL_PADCONF_ETK_D11 0x0A42
+#define CONTROL_PADCONF_ETK_D12 0x0A44
+#define CONTROL_PADCONF_ETK_D13 0x0A46
+#define CONTROL_PADCONF_ETK_D14 0x0A48
+#define CONTROL_PADCONF_ETK_D15 0x0A4A
+#define CONTROL_PADCONF_ETK_CLK_ES2 0x05D8
+#define CONTROL_PADCONF_ETK_CTL_ES2 0x05DA
+#define CONTROL_PADCONF_ETK_D0_ES2 0x05DC
+#define CONTROL_PADCONF_ETK_D1_ES2 0x05DE
+#define CONTROL_PADCONF_ETK_D2_ES2 0x05E0
+#define CONTROL_PADCONF_ETK_D3_ES2 0x05E2
+#define CONTROL_PADCONF_ETK_D4_ES2 0x05E4
+#define CONTROL_PADCONF_ETK_D5_ES2 0x05E6
+#define CONTROL_PADCONF_ETK_D6_ES2 0x05E8
+#define CONTROL_PADCONF_ETK_D7_ES2 0x05EA
+#define CONTROL_PADCONF_ETK_D8_ES2 0x05EC
+#define CONTROL_PADCONF_ETK_D9_ES2 0x05EE
+#define CONTROL_PADCONF_ETK_D10_ES2 0x05F0
+#define CONTROL_PADCONF_ETK_D11_ES2 0x05F2
+#define CONTROL_PADCONF_ETK_D12_ES2 0x05F4
+#define CONTROL_PADCONF_ETK_D13_ES2 0x05F6
+#define CONTROL_PADCONF_ETK_D14_ES2 0x05F8
+#define CONTROL_PADCONF_ETK_D15_ES2 0x05FA
+/*Die to Die */
+#define CONTROL_PADCONF_D2D_MCAD0 0x01E4
+#define CONTROL_PADCONF_D2D_MCAD1 0x01E6
+#define CONTROL_PADCONF_D2D_MCAD2 0x01E8
+#define CONTROL_PADCONF_D2D_MCAD3 0x01EA
+#define CONTROL_PADCONF_D2D_MCAD4 0x01EC
+#define CONTROL_PADCONF_D2D_MCAD5 0x01EE
+#define CONTROL_PADCONF_D2D_MCAD6 0x01F0
+#define CONTROL_PADCONF_D2D_MCAD7 0x01F2
+#define CONTROL_PADCONF_D2D_MCAD8 0x01F4
+#define CONTROL_PADCONF_D2D_MCAD9 0x01F6
+#define CONTROL_PADCONF_D2D_MCAD10 0x01F8
+#define CONTROL_PADCONF_D2D_MCAD11 0x01FA
+#define CONTROL_PADCONF_D2D_MCAD12 0x01FC
+#define CONTROL_PADCONF_D2D_MCAD13 0x01FE
+#define CONTROL_PADCONF_D2D_MCAD14 0x0200
+#define CONTROL_PADCONF_D2D_MCAD15 0x0202
+#define CONTROL_PADCONF_D2D_MCAD16 0x0204
+#define CONTROL_PADCONF_D2D_MCAD17 0x0206
+#define CONTROL_PADCONF_D2D_MCAD18 0x0208
+#define CONTROL_PADCONF_D2D_MCAD19 0x020A
+#define CONTROL_PADCONF_D2D_MCAD20 0x020C
+#define CONTROL_PADCONF_D2D_MCAD21 0x020E
+#define CONTROL_PADCONF_D2D_MCAD22 0x0210
+#define CONTROL_PADCONF_D2D_MCAD23 0x0212
+#define CONTROL_PADCONF_D2D_MCAD24 0x0214
+#define CONTROL_PADCONF_D2D_MCAD25 0x0216
+#define CONTROL_PADCONF_D2D_MCAD26 0x0218
+#define CONTROL_PADCONF_D2D_MCAD27 0x021A
+#define CONTROL_PADCONF_D2D_MCAD28 0x021C
+#define CONTROL_PADCONF_D2D_MCAD29 0x021E
+#define CONTROL_PADCONF_D2D_MCAD30 0x0220
+#define CONTROL_PADCONF_D2D_MCAD31 0x0222
+#define CONTROL_PADCONF_D2D_MCAD32 0x0224
+#define CONTROL_PADCONF_D2D_MCAD33 0x0226
+#define CONTROL_PADCONF_D2D_MCAD34 0x0228
+#define CONTROL_PADCONF_D2D_MCAD35 0x022A
+#define CONTROL_PADCONF_D2D_MCAD36 0x022C
+#define CONTROL_PADCONF_D2D_CLK26MI 0x022E
+#define CONTROL_PADCONF_D2D_NRESPWRON 0x0230
+#define CONTROL_PADCONF_D2D_NRESWARM 0x0232
+#define CONTROL_PADCONF_D2D_ARM9NIRQ 0x0234
+#define CONTROL_PADCONF_D2D_UMA2P6FIQ 0x0236
+#define CONTROL_PADCONF_D2D_SPINT 0x0238
+#define CONTROL_PADCONF_D2D_FRINT 0x023A
+#define CONTROL_PADCONF_D2D_DMAREQ0 0x023C
+#define CONTROL_PADCONF_D2D_DMAREQ1 0x023E
+#define CONTROL_PADCONF_D2D_DMAREQ2 0x0240
+#define CONTROL_PADCONF_D2D_DMAREQ3 0x0242
+#define CONTROL_PADCONF_D2D_N3GTRST 0x0244
+#define CONTROL_PADCONF_D2D_N3GTDI 0x0246
+#define CONTROL_PADCONF_D2D_N3GTDO 0x0248
+#define CONTROL_PADCONF_D2D_N3GTMS 0x024A
+#define CONTROL_PADCONF_D2D_N3GTCK 0x024C
+#define CONTROL_PADCONF_D2D_N3GRTCK 0x024E
+#define CONTROL_PADCONF_D2D_MSTDBY 0x0250
+#define CONTROL_PADCONF_D2D_SWAKEUP 0x0A4C
+#define CONTROL_PADCONF_D2D_IDLEREQ 0x0252
+#define CONTROL_PADCONF_D2D_IDLEACK 0x0254
+#define CONTROL_PADCONF_D2D_MWRITE 0x0256
+#define CONTROL_PADCONF_D2D_SWRITE 0x0258
+#define CONTROL_PADCONF_D2D_MREAD 0x025A
+#define CONTROL_PADCONF_D2D_SREAD 0x025C
+#define CONTROL_PADCONF_D2D_MBUSFLAG 0x025E
+#define CONTROL_PADCONF_D2D_SBUSFLAG 0x0260
+#define CONTROL_PADCONF_SDRC_CKE0 0x0262
+#define CONTROL_PADCONF_SDRC_CKE1 0x0264
+
+#define MUX_VAL(OFFSET,VALUE)\
+ writew((VALUE), OMAP34XX_CTRL_BASE + (OFFSET));
+
+#define CP(x) (CONTROL_PADCONF_##x)
+
+#endif
Index: u-boot-main/include/asm-arm/arch-omap3/bits.h
===================================================================
--- /dev/null
+++ u-boot-main/include/asm-arm/arch-omap3/bits.h
@@ -0,0 +1,48 @@
+/* bits.h
+ * Copyright (c) 2004 Texas Instruments
+ *
+ * This package is free software; you can redistribute it and/or
+ * modify it under the terms of the license found in the file
+ * named COPYING that should have accompanied this file.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+#ifndef __bits_h
+#define __bits_h 1
+
+#define BIT0 (1 << 0)
+#define BIT1 (1 << 1)
+#define BIT2 (1 << 2)
+#define BIT3 (1 << 3)
+#define BIT4 (1 << 4)
+#define BIT5 (1 << 5)
+#define BIT6 (1 << 6)
+#define BIT7 (1 << 7)
+#define BIT8 (1 << 8)
+#define BIT9 (1 << 9)
+#define BIT10 (1 << 10)
+#define BIT11 (1 << 11)
+#define BIT12 (1 << 12)
+#define BIT13 (1 << 13)
+#define BIT14 (1 << 14)
+#define BIT15 (1 << 15)
+#define BIT16 (1 << 16)
+#define BIT17 (1 << 17)
+#define BIT18 (1 << 18)
+#define BIT19 (1 << 19)
+#define BIT20 (1 << 20)
+#define BIT21 (1 << 21)
+#define BIT22 (1 << 22)
+#define BIT23 (1 << 23)
+#define BIT24 (1 << 24)
+#define BIT25 (1 << 25)
+#define BIT26 (1 << 26)
+#define BIT27 (1 << 27)
+#define BIT28 (1 << 28)
+#define BIT29 (1 << 29)
+#define BIT30 (1 << 30)
+#define BIT31 (1 << 31)
+
+#endif
Index: u-boot-main/include/asm-arm/arch-omap3/clocks.h
===================================================================
--- /dev/null
+++ u-boot-main/include/asm-arm/arch-omap3/clocks.h
@@ -0,0 +1,62 @@
+/*
+ * (C) Copyright 2006-2008
+ * Texas Instruments, <www.ti.com>
+ * Richard Woodruff <r-woodruff2 at ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef _CLOCKS_H_
+#define _CLOCKS_H_
+
+#define LDELAY 12000000
+
+#define S12M 12000000
+#define S13M 13000000
+#define S19_2M 19200000
+#define S24M 24000000
+#define S26M 26000000
+#define S38_4M 38400000
+
+#define FCK_IVA2_ON 0x00000001
+#define FCK_CORE1_ON 0x03fffe29
+#define ICK_CORE1_ON 0x3ffffffb
+#define ICK_CORE2_ON 0x0000001f
+#define FCK_WKUP_ON 0x000000e9
+#define ICK_WKUP_ON 0x0000003f
+#define FCK_DSS_ON 0x00000005
+#define ICK_DSS_ON 0x00000001
+#define FCK_CAM_ON 0x00000001
+#define ICK_CAM_ON 0x00000001
+#define FCK_PER_ON 0x0003ffff
+#define ICK_PER_ON 0x0003ffff
+
+/* Used to index into DPLL parameter tables */
+typedef struct {
+ unsigned int m;
+ unsigned int n;
+ unsigned int fsel;
+ unsigned int m2;
+} dpll_param;
+
+/* Following functions are exported from lowlevel_init.S */
+extern dpll_param *get_mpu_dpll_param(void);
+extern dpll_param *get_iva_dpll_param(void);
+extern dpll_param *get_core_dpll_param(void);
+extern dpll_param *get_per_dpll_param(void);
+
+extern void *_end_vect, *_start;
+
+#endif
Index: u-boot-main/include/asm-arm/arch-omap3/clocks_omap3.h
===================================================================
--- /dev/null
+++ u-boot-main/include/asm-arm/arch-omap3/clocks_omap3.h
@@ -0,0 +1,101 @@
+/*
+ * (C) Copyright 2006-2008
+ * Texas Instruments, <www.ti.com>
+ * Richard Woodruff <r-woodruff2 at ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef _CLOCKS_OMAP3_H_
+#define _CLOCKS_OMAP3_H_
+
+#define PLL_STOP 1 /* PER & IVA */
+#define PLL_LOW_POWER_BYPASS 5 /* MPU, IVA & CORE */
+#define PLL_FAST_RELOCK_BYPASS 6 /* CORE */
+#define PLL_LOCK 7 /* MPU, IVA, CORE & PER */
+
+/* The following configurations are OPP and SysClk value independant
+ * and hence are defined here. All the other DPLL related values are
+ * tabulated in lowlevel_init.S.
+ */
+
+/* CORE DPLL */
+#define CORE_M3X2 2 /* 332MHz : CM_CLKSEL1_EMU */
+#define CORE_SSI_DIV 3 /* 221MHz : CM_CLKSEL_CORE */
+#define CORE_FUSB_DIV 2 /* 41.5MHz: */
+#define CORE_L4_DIV 2 /* 83MHz : L4 */
+#define CORE_L3_DIV 2 /* 166MHz : L3 {DDR} */
+#define GFX_DIV 2 /* 83MHz : CM_CLKSEL_GFX */
+#define WKUP_RSM 2 /* 41.5MHz: CM_CLKSEL_WKUP */
+
+/* PER DPLL */
+#define PER_M6X2 3 /* 288MHz: CM_CLKSEL1_EMU */
+#define PER_M5X2 4 /* 216MHz: CM_CLKSEL_CAM */
+#define PER_M4X2 2 /* 432MHz: CM_CLKSEL_DSS-dss1 */
+#define PER_M3X2 16 /* 54MHz : CM_CLKSEL_DSS-tv */
+
+#define CLSEL1_EMU_VAL ((CORE_M3X2 << 16) | (PER_M6X2 << 24) | (0x0A50))
+
+#define M_12 0xA6
+#define N_12 0x05
+#define FSEL_12 0x07
+#define M2_12 0x01 /* M3 of 2 */
+
+#define M_12_ES1 0x19F
+#define N_12_ES1 0x0E
+#define FSL_12_ES1 0x03
+#define M2_12_ES1 0x1 /* M3 of 2 */
+
+#define M_13 0x14C
+#define N_13 0x0C
+#define FSEL_13 0x03
+#define M2_13 0x01 /* M3 of 2 */
+
+#define M_13_ES1 0x1B2
+#define N_13_ES1 0x10
+#define FSL_13_ES1 0x03
+#define M2_13_ES1 0x01 /* M3 of 2 */
+
+#define M_19p2 0x19F
+#define N_19p2 0x17
+#define FSEL_19p2 0x03
+#define M2_19p2 0x01 /* M3 of 2 */
+
+#define M_19p2_ES1 0x19F
+#define N_19p2_ES1 0x17
+#define FSL_19p2_ES1 0x03
+#define M2_19p2_ES1 0x01 /* M3 of 2 */
+
+#define M_26 0xA6
+#define N_26 0x0C
+#define FSEL_26 0x07
+#define M2_26 0x01 /* M3 of 2 */
+
+#define M_26_ES1 0x1B2
+#define N_26_ES1 0x21
+#define FSL_26_ES1 0x03
+#define M2_26_ES1 0x01 /* M3 of 2 */
+
+#define M_38p4 0x19F
+#define N_38p4 0x2F
+#define FSEL_38p4 0x03
+#define M2_38p4 0x01 /* M3 of 2 */
+
+#define M_38p4_ES1 0x19F
+#define N_38p4_ES1 0x2F
+#define FSL_38p4_ES1 0x03
+#define M2_38p4_ES1 0x01 /* M3 of 2 */
+
+#endif /* endif _CLOCKS_OMAP3_H_ */
Index: u-boot-main/include/asm-arm/arch-omap3/cpu.h
===================================================================
--- /dev/null
+++ u-boot-main/include/asm-arm/arch-omap3/cpu.h
@@ -0,0 +1,256 @@
+/*
+ * (C) Copyright 2006-2008
+ * Texas Instruments, <www.ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#ifndef _CPU_H
+#define _CPU_H
+
+#define OFFS(x) ((x) >> 2)
+
+/* Register offsets of common modules */
+/* Control */
+#define CONTROL_STATUS (OMAP34XX_CTRL_BASE + 0x2F0)
+#define OMAP34XX_MCR (OMAP34XX_CTRL_BASE + 0x8C)
+#define CONTROL_SCALABLE_OMAP_STATUS (OMAP34XX_CTRL_BASE + 0x44C)
+#define CONTROL_SCALABLE_OMAP_OCP (OMAP34XX_CTRL_BASE + 0x534)
+
+/* Tap Information */
+#define TAP_IDCODE_REG (OMAP34XX_TAP_BASE + 0x204)
+#define PRODUCTION_ID (OMAP34XX_TAP_BASE + 0x208)
+
+/* device type */
+#define DEVICE_MASK (BIT8 | BIT9 | BIT10)
+#define TST_DEVICE 0x0
+#define EMU_DEVICE 0x1
+#define HS_DEVICE 0x2
+#define GP_DEVICE 0x3
+
+/* GPMC CS3/cs4/cs6 not avaliable */
+#define GPMC_BASE (OMAP34XX_GPMC_BASE)
+
+#define GPMC_SYSCONFIG (0x10)
+#define GPMC_IRQSTATUS (0x18)
+#define GPMC_IRQENABLE (0x1C)
+#define GPMC_TIMEOUT_CONTROL (0x40)
+#define GPMC_CONFIG (0x50)
+#define GPMC_STATUS (0x54)
+#define GPMC_CONFIG_CS0 (0x60)
+
+#define GPMC_CONFIG_REG (GPMC_BASE + GPMC_CONFIG)
+#define GPMC_CONFIG_CS0_BASE (GPMC_BASE + GPMC_CONFIG_CS0)
+#define GPMC_CONFIG_WP (0x10)
+
+#define GPMC_CONFIG_WIDTH (0x30)
+
+#define GPMC_CONFIG1 (0x00)
+#define GPMC_CONFIG2 (0x04)
+#define GPMC_CONFIG3 (0x08)
+#define GPMC_CONFIG4 (0x0C)
+#define GPMC_CONFIG5 (0x10)
+#define GPMC_CONFIG6 (0x14)
+#define GPMC_CONFIG7 (0x18)
+#define GPMC_NAND_CMD (0x1C)
+#define GPMC_NAND_ADR (0x20)
+#define GPMC_NAND_DAT (0x24)
+
+#define GPMC_ECC_CONFIG (0x1F4)
+#define GPMC_ECC_CONTROL (0x1F8)
+#define GPMC_ECC_SIZE_CONFIG (0x1FC)
+#define GPMC_ECC1_RESULT (0x200)
+#define GPMC_ECC2_RESULT (0x204)
+#define GPMC_ECC3_RESULT (0x208)
+#define GPMC_ECC4_RESULT (0x20C)
+#define GPMC_ECC5_RESULT (0x210)
+#define GPMC_ECC6_RESULT (0x214)
+#define GPMC_ECC7_RESULT (0x218)
+#define GPMC_ECC8_RESULT (0x21C)
+#define GPMC_ECC9_RESULT (0x220)
+
+/* GPMC Mapping */
+#define FLASH_BASE 0x10000000 /* NOR flash, */
+ /* aligned to 256 Meg */
+#define FLASH_BASE_SDPV1 0x04000000 /* NOR flash, */
+ /* aligned to 64 Meg */
+#define FLASH_BASE_SDPV2 0x10000000 /* NOR flash, */
+ /* aligned to 256 Meg */
+#define DEBUG_BASE 0x08000000 /* debug board */
+#define NAND_BASE 0x30000000 /* NAND addr */
+ /* (actual size small port) */
+#define PISMO2_BASE 0x18000000 /* PISMO2 CS1/2 */
+#define ONENAND_MAP 0x20000000 /* OneNand addr */
+ /* (actual size small port) */
+
+/* SMS */
+#define SMS_SYSCONFIG (OMAP34XX_SMS_BASE + 0x10)
+#define SMS_RG_ATT0 (OMAP34XX_SMS_BASE + 0x48)
+#define SMS_CLASS_ARB0 (OMAP34XX_SMS_BASE + 0xD0)
+#define BURSTCOMPLETE_GROUP7 BIT31
+
+/* SDRC */
+#define SDRC_SYSCONFIG (OMAP34XX_SDRC_BASE + 0x10)
+#define SDRC_STATUS (OMAP34XX_SDRC_BASE + 0x14)
+#define SDRC_CS_CFG (OMAP34XX_SDRC_BASE + 0x40)
+#define SDRC_SHARING (OMAP34XX_SDRC_BASE + 0x44)
+#define SDRC_DLLA_CTRL (OMAP34XX_SDRC_BASE + 0x60)
+#define SDRC_DLLA_STATUS (OMAP34XX_SDRC_BASE + 0x64)
+#define SDRC_DLLB_CTRL (OMAP34XX_SDRC_BASE + 0x68)
+#define SDRC_DLLB_STATUS (OMAP34XX_SDRC_BASE + 0x6C)
+#define DLLPHASE BIT1
+#define LOADDLL BIT2
+#define DLL_DELAY_MASK 0xFF00
+#define DLL_NO_FILTER_MASK (BIT8 | BIT9)
+
+#define SDRC_POWER (OMAP34XX_SDRC_BASE + 0x70)
+#define WAKEUPPROC BIT26
+
+#define SDRC_MCFG_0 (OMAP34XX_SDRC_BASE + 0x80)
+#define SDRC_MR_0 (OMAP34XX_SDRC_BASE + 0x84)
+#define SDRC_ACTIM_CTRLA_0 (OMAP34XX_SDRC_BASE + 0x9C)
+#define SDRC_ACTIM_CTRLB_0 (OMAP34XX_SDRC_BASE + 0xA0)
+#define SDRC_ACTIM_CTRLA_1 (OMAP34XX_SDRC_BASE + 0xC4)
+#define SDRC_ACTIM_CTRLB_1 (OMAP34XX_SDRC_BASE + 0xC8)
+#define SDRC_RFR_CTRL (OMAP34XX_SDRC_BASE + 0xA4)
+#define SDRC_MANUAL_0 (OMAP34XX_SDRC_BASE + 0xA8)
+#define OMAP34XX_SDRC_CS0 0x80000000
+#define OMAP34XX_SDRC_CS1 0xA0000000
+#define CMD_NOP 0x0
+#define CMD_PRECHARGE 0x1
+#define CMD_AUTOREFRESH 0x2
+#define CMD_ENTR_PWRDOWN 0x3
+#define CMD_EXIT_PWRDOWN 0x4
+#define CMD_ENTR_SRFRSH 0x5
+#define CMD_CKE_HIGH 0x6
+#define CMD_CKE_LOW 0x7
+#define SOFTRESET BIT1
+#define SMART_IDLE (0x2 << 3)
+#define REF_ON_IDLE (0x1 << 6)
+
+/* timer regs offsets (32 bit regs) */
+#define TIDR 0x0 /* r */
+#define TIOCP_CFG 0x10 /* rw */
+#define TISTAT 0x14 /* r */
+#define TISR 0x18 /* rw */
+#define TIER 0x1C /* rw */
+#define TWER 0x20 /* rw */
+#define TCLR 0x24 /* rw */
+#define TCRR 0x28 /* rw */
+#define TLDR 0x2C /* rw */
+#define TTGR 0x30 /* rw */
+#define TWPS 0x34 /* r */
+#define TMAR 0x38 /* rw */
+#define TCAR1 0x3c /* r */
+#define TSICR 0x40 /* rw */
+#define TCAR2 0x44 /* r */
+/* enable sys_clk NO-prescale /1 */
+#define GPT_EN ((0 << 2) | BIT1 | BIT0)
+
+/* Watchdog */
+#define WWPS 0x34 /* r */
+#define WSPR 0x48 /* rw */
+#define WD_UNLOCK1 0xAAAA
+#define WD_UNLOCK2 0x5555
+
+/* PRCM */
+#define CM_FCLKEN_IVA2 0x48004000
+#define CM_CLKEN_PLL_IVA2 0x48004004
+#define CM_IDLEST_PLL_IVA2 0x48004024
+#define CM_CLKSEL1_PLL_IVA2 0x48004040
+#define CM_CLKSEL2_PLL_IVA2 0x48004044
+#define CM_CLKEN_PLL_MPU 0x48004904
+#define CM_IDLEST_PLL_MPU 0x48004924
+#define CM_CLKSEL1_PLL_MPU 0x48004940
+#define CM_CLKSEL2_PLL_MPU 0x48004944
+#define CM_FCLKEN1_CORE 0x48004a00
+#define CM_ICLKEN1_CORE 0x48004a10
+#define CM_ICLKEN2_CORE 0x48004a14
+#define CM_CLKSEL_CORE 0x48004a40
+#define CM_FCLKEN_GFX 0x48004b00
+#define CM_ICLKEN_GFX 0x48004b10
+#define CM_CLKSEL_GFX 0x48004b40
+#define CM_FCLKEN_WKUP 0x48004c00
+#define CM_ICLKEN_WKUP 0x48004c10
+#define CM_CLKSEL_WKUP 0x48004c40
+#define CM_IDLEST_WKUP 0x48004c20
+#define CM_CLKEN_PLL 0x48004d00
+#define CM_IDLEST_CKGEN 0x48004d20
+#define CM_CLKSEL1_PLL 0x48004d40
+#define CM_CLKSEL2_PLL 0x48004d44
+#define CM_CLKSEL3_PLL 0x48004d48
+#define CM_FCLKEN_DSS 0x48004e00
+#define CM_ICLKEN_DSS 0x48004e10
+#define CM_CLKSEL_DSS 0x48004e40
+#define CM_FCLKEN_CAM 0x48004f00
+#define CM_ICLKEN_CAM 0x48004f10
+#define CM_CLKSEL_CAM 0x48004F40
+#define CM_FCLKEN_PER 0x48005000
+#define CM_ICLKEN_PER 0x48005010
+#define CM_CLKSEL_PER 0x48005040
+#define CM_CLKSEL1_EMU 0x48005140
+
+#define PRM_CLKSEL 0x48306d40
+#define PRM_RSTCTRL 0x48307250
+#define PRM_CLKSRC_CTRL 0x48307270
+
+/* SMX-APE */
+#define PM_RT_APE_BASE_ADDR_ARM (SMX_APE_BASE + 0x10000)
+#define PM_GPMC_BASE_ADDR_ARM (SMX_APE_BASE + 0x12400)
+#define PM_OCM_RAM_BASE_ADDR_ARM (SMX_APE_BASE + 0x12800)
+#define PM_OCM_ROM_BASE_ADDR_ARM (SMX_APE_BASE + 0x12C00)
+#define PM_IVA2_BASE_ADDR_ARM (SMX_APE_BASE + 0x14000)
+
+#define RT_REQ_INFO_PERMISSION_1 (PM_RT_APE_BASE_ADDR_ARM + 0x68)
+#define RT_READ_PERMISSION_0 (PM_RT_APE_BASE_ADDR_ARM + 0x50)
+#define RT_WRITE_PERMISSION_0 (PM_RT_APE_BASE_ADDR_ARM + 0x58)
+#define RT_ADDR_MATCH_1 (PM_RT_APE_BASE_ADDR_ARM + 0x60)
+
+#define GPMC_REQ_INFO_PERMISSION_0 (PM_GPMC_BASE_ADDR_ARM + 0x48)
+#define GPMC_READ_PERMISSION_0 (PM_GPMC_BASE_ADDR_ARM + 0x50)
+#define GPMC_WRITE_PERMISSION_0 (PM_GPMC_BASE_ADDR_ARM + 0x58)
+
+#define OCM_REQ_INFO_PERMISSION_0 (PM_OCM_RAM_BASE_ADDR_ARM + 0x48)
+#define OCM_READ_PERMISSION_0 (PM_OCM_RAM_BASE_ADDR_ARM + 0x50)
+#define OCM_WRITE_PERMISSION_0 (PM_OCM_RAM_BASE_ADDR_ARM + 0x58)
+#define OCM_ADDR_MATCH_2 (PM_OCM_RAM_BASE_ADDR_ARM + 0x80)
+
+#define IVA2_REQ_INFO_PERMISSION_0 (PM_IVA2_BASE_ADDR_ARM + 0x48)
+#define IVA2_READ_PERMISSION_0 (PM_IVA2_BASE_ADDR_ARM + 0x50)
+#define IVA2_WRITE_PERMISSION_0 (PM_IVA2_BASE_ADDR_ARM + 0x58)
+
+#define IVA2_REQ_INFO_PERMISSION_1 (PM_IVA2_BASE_ADDR_ARM + 0x68)
+#define IVA2_READ_PERMISSION_1 (PM_IVA2_BASE_ADDR_ARM + 0x70)
+#define IVA2_WRITE_PERMISSION_1 (PM_IVA2_BASE_ADDR_ARM + 0x78)
+
+#define IVA2_REQ_INFO_PERMISSION_2 (PM_IVA2_BASE_ADDR_ARM + 0x88)
+#define IVA2_READ_PERMISSION_2 (PM_IVA2_BASE_ADDR_ARM + 0x90)
+#define IVA2_WRITE_PERMISSION_2 (PM_IVA2_BASE_ADDR_ARM + 0x98)
+
+#define IVA2_REQ_INFO_PERMISSION_3 (PM_IVA2_BASE_ADDR_ARM + 0xA8)
+#define IVA2_READ_PERMISSION_3 (PM_IVA2_BASE_ADDR_ARM + 0xB0)
+#define IVA2_WRITE_PERMISSION_3 (PM_IVA2_BASE_ADDR_ARM + 0xB8)
+
+/* I2C base */
+#define I2C_BASE1 (OMAP34XX_CORE_L4_IO_BASE + 0x70000)
+#define I2C_BASE2 (OMAP34XX_CORE_L4_IO_BASE + 0x72000)
+#define I2C_BASE3 (OMAP34XX_CORE_L4_IO_BASE + 0x60000)
+
+#endif /* _CPU_H */
More information about the U-Boot
mailing list