[U-Boot] [PATCH] ne2000: take MAC address from config if available

[Daniel Mack]

Hi,

the board I'm currently working on has an ASIX AX88796 NE2000 clone but
no EEPROM attached to it. Hence, the get_prom() routine returns zeros
only so the system won't work.

This patch takes the MAC address given by CONFIG_ETHADDR and translates
it to numeric values. This could probably go to some other, more generic
place, but I didn't find any.

Best regards,
Daniel


diff --git a/drivers/net/ne2000_base.c b/drivers/net/ne2000_base.c
index f93f932..f8480a3 100644
--- a/drivers/net/ne2000_base.c
+++ b/drivers/net/ne2000_base.c
@@ -693,6 +693,7 @@ int eth_init(bd_t *bd) {
 
 	nic.base = (u8 *) CONFIG_DRIVER_NE2000_BASE;
 
+#ifndef CONFIG_ETHADDR
 	r = get_prom(dev_addr, nic.base);
 	if (!r)
 		return -1;
@@ -703,6 +704,20 @@ int eth_init(bd_t *bd) {
 		 dev_addr[4], dev_addr[5]) ;
 	PRINTK("Set environment from HW MAC addr = \"%s\"\n", ethaddr);
 	setenv ("ethaddr", ethaddr);
+#else /* CONFIG_ETHADDR */
+#define STR(X) #X
+#define XSTR(X) STR(X)
+	strncpy(ethaddr, XSTR(CONFIG_ETHADDR), sizeof(ethaddr));
+
+	/* replace all colons by NULL characters */
+	for (r = 0; r < strlen(ethaddr); r++)
+		if (ethaddr[r] == ':')
+			ethaddr[r] = '\0';
+	
+	/* convert the string notation */
+	for (r = 0; r < 6; r++)
+		dev_addr[r] = simple_strtol(ethaddr + (r * 3), NULL, 16);
+#endif
 
 	nic.data = nic.base + DP_DATA;
 	nic.tx_buf1 = START_PG;