[U-Boot] [PATCH v2] Freescale NFC NAND driver

[Magnus Lilja]

Hi

2008/11/5 John Rigby <jrigby at freescale.com>:
> Reworked MPC5121 NAND driver.
> Attempted to address all the problems listed by Scott Wood.
> Driver is now board independent.  Will still need more
> work to be SOC independent.
>
> Driver for the NAND controller on MPC5121.
>
> This driver has been tested on ADS5121 rev4 / MPC5121e rev2 only
> which has the following configuration:
>    2K page size
>    8 bit device width
>
> This should work on other boards with MPC5121 rev2 silicon with
> little or no change to the driver.
>
> Various vintages of this controller exist on some iMX parts.
> Getting it to work on an iMX with the same controller version
> should be fairly easy.  More work if it is an iMX with a different
> version on the controller.

The i.MX31 seems to have NFC v1 while i.MX32 has v2, would that mean
that your driver is likely to work with i.MX32?

Regards, Magnus