[U-Boot] Building u-boot for the AT91RM9200-EK circa 2008

[Wolfgang Denk]

Dear Pink Boy,

In message <832725.42708.qm at web31815.mail.mud.yahoo.com> you wrote:
> 
> Okay then.  I was able to compile u-boot 1.3.4 for the AT91RM9200DK
> with changes so that it can handle writing to the flash on my custom
> board base don the AT91RM9200EK.  

Great.

> Seems to work but writes to flash are very slow...

You probably did not enable CONFIG_SYS_FLASH_USE_BUFFER_WRITE yet?

> However it's a hack of the DK board. I will try over the next week 
> or two to make a version of the AT91RM9200DK u-boot that uses the 
> CFI driver. And then submit a patch for that.

Thanks in advance.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"Here's a fish hangs in the net like a poor man's right in  the  law.
'Twill hardly come out."     - Shakespeare, Pericles, Act II, Scene 1