[U-Boot] LXT971 ethernet on MCF5485

[raul.moreno at telvent.com]

 Hi everyone!                                                                                   
                                                                                                
 I'm  porting  the  U-boot  to  my  custom board that has a MCF5485. I had the reference of the 
 MCF5485EVB.                                                                                    
 I am using for ethernet a LXT971 chip instead a Broadcom one and I am having some problems. It 
 doesn't  work  right  and I am not sure why. Through mii console commands I can read and write 
 the  register  of  the  chip, but when I use the ethernet, for example "ping", it takes a long 
 long time.                                                                                     
 I  guess  the  problem is in the mii.c file. Probably I have to add some inital configuration, 
 but I don't know what.                                                                         
                                                                                                
 Has anyone used this LXT971 on this type of Coldfire?                                          
                                                                                                
 Thanks in advance.                                                                             
                                                                                                
                                                                                                




***********Internet Email Confidentiality Footer*************
This email and any files transmitted with it are confidential and intended
solely for the use of the organization or individual to whom they are
addressed.  It is expressly forbidden to retransmit or copy email and/or
this  attached files without our permission .  If you are not the
addressee indicated in this message (or responsible for delivery of the
message to such person), you may not copy or deliver this message
to anyone. In such case, you should destroy this message and kindly
notify the sender by reply email. Please advise immediately if you or
your employer does not consent to Internet email for messages of this
kind.  Opinions, conclusions and other information in this message that
do not relate to the official business of my firm shall be understood as
neither given nor endorsed by it.