[U-Boot] uboot loading address.

[Rajesh Venkataraman]

Hi,

 

I want to know about the U-BOOT loading address in MPC8572DS development
board (boot flash Address map 0_F800_0000 to 0_FFFF_FFFF -> 128Mb). For
MPC8572 the default boot rom address is 0xff800000, I also want to know
to which address I have to load the uboot first and once uboot gets
executed where I have to store the image in the same flash area
(possibly the image storing address) if down load the image via tftp.

 

Can anyone help me on this.

 

 

Warm Regards

Rajesh Venkataraman

 



DISCLAIMER:
-----------------------------------------------------------------------------------------------------------------------

The contents of this e-mail and any attachment(s) are confidential and intended for the named recipient(s) only.
It shall not attach any liability on the originator or HCL or its affiliates. Any views or opinions presented in 
this email are solely those of the author and may not necessarily reflect the opinions of HCL or its affiliates.
Any form of reproduction, dissemination, copying, disclosure, modification, distribution and / or publication of 
this message without the prior written consent of the author of this e-mail is strictly prohibited. If you have 
received this email in error please delete it and notify the sender immediately. Before opening any mail and 
attachments please check them for viruses and defect.

-----------------------------------------------------------------------------------------------------------------------