[U-Boot] [PATCH] Blackfin: use common strmhz() in system output

[Mike Frysinger]

Signed-off-by: Mike Frysinger <vapier at gentoo.org>
---
 common/cmd_bdinfo.c  |   10 ++++++----
 lib_blackfin/board.c |    6 ++++--
 2 files changed, 10 insertions(+), 6 deletions(-)

diff --git a/common/cmd_bdinfo.c b/common/cmd_bdinfo.c
index 6675241..b660d2a 100644
--- a/common/cmd_bdinfo.c
+++ b/common/cmd_bdinfo.c
@@ -328,18 +328,20 @@ int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 }
 
 #elif defined(CONFIG_BLACKFIN)
+static void print_str(const char *, const char *);
 
 int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 {
 	int i;
 	bd_t *bd = gd->bd;
+	char buf[32];
 
 	printf("U-Boot      = %s\n", bd->bi_r_version);
 	printf("CPU         = %s\n", bd->bi_cpu);
 	printf("Board       = %s\n", bd->bi_board_name);
-	printf("VCO         = %lu MHz\n", bd->bi_vco / 1000000);
-	printf("CCLK        = %lu MHz\n", bd->bi_cclk / 1000000);
-	printf("SCLK        = %lu MHz\n", bd->bi_sclk / 1000000);
+	print_str("VCO",         strmhz(buf, bd->bi_vco));
+	print_str("CCLK",        strmhz(buf, bd->bi_cclk));
+	print_str("SCLK",        strmhz(buf, bd->bi_sclk));
 
 	print_num("boot_params", (ulong)bd->bi_boot_params);
 	print_num("memstart",    (ulong)bd->bi_memstart);
@@ -430,7 +432,7 @@ static void print_lnum(const char *name, u64 value)
 }
 #endif
 
-#if defined(CONFIG_PPC) || defined(CONFIG_M68K)
+#if defined(CONFIG_PPC) || defined(CONFIG_M68K) || defined(CONFIG_BLACKFIN)
 static void print_str(const char *name, const char *str)
 {
 	printf ("%-12s= %6s MHz\n", name, str);
diff --git a/lib_blackfin/board.c b/lib_blackfin/board.c
index e184fd2..969359f 100644
--- a/lib_blackfin/board.c
+++ b/lib_blackfin/board.c
@@ -256,6 +256,7 @@ void board_init_f(ulong bootflag)
 {
 	ulong addr;
 	bd_t *bd;
+	char buf[32];
 
 #ifdef CONFIG_BOARD_EARLY_INIT_F
 	serial_early_puts("Board early init flash\n");
@@ -314,8 +315,9 @@ void board_init_f(ulong bootflag)
 	checkboard();
 	timer_init();
 
-	printf("Clock: VCO: %lu MHz, Core: %lu MHz, System: %lu MHz\n",
-	       get_vco() / 1000000, get_cclk() / 1000000, get_sclk() / 1000000);
+	printf("Clock: VCO: %s MHz, ", strmhz(buf, get_vco()));
+	printf("Core: %s MHz, ", strmhz(buf, get_cclk()));
+	printf("System: %s MHz\n", strmhz(buf, get_sclk()));
 
 	printf("RAM:   ");
 	print_size(initdram(0), "\n");
-- 
1.6.0.3