[U-Boot] [PATCH RFC] at91sam9/at91cap: move common initialisation to cpu
Jean-Christophe PLAGNIOL-VILLARD
plagnioj at jcrosoft.com
Fri Nov 7 20:38:26 CET 2008
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>
---
The idea is to reduce common code initialisation which is actually in board.
as done on afeb9260 and Ronetix eval board for 9260 & 9263
Best Regards,
J.
board/afeb9260/afeb9260.c | 32 ++----------
board/atmel/at91cap9adk/at91cap9adk.c | 33 ++-----------
board/atmel/at91sam9260ek/at91sam9260ek.c | 34 ++-----------
board/atmel/at91sam9261ek/at91sam9261ek.c | 33 ++-----------
board/atmel/at91sam9263ek/at91sam9263ek.c | 33 ++-----------
board/atmel/at91sam9rlek/at91sam9rlek.c | 33 ++-----------
cpu/arm926ejs/at91/Makefile | 19 +++++++-
cpu/arm926ejs/at91/at91cap9_serial.c | 73 +++++++++++++++++++++++++++++
cpu/arm926ejs/at91/at91cap9_spi.c | 41 ++++++++++++++++
cpu/arm926ejs/at91/at91sam9260_serial.c | 73 +++++++++++++++++++++++++++++
cpu/arm926ejs/at91/at91sam9260_spi.c | 42 ++++++++++++++++
cpu/arm926ejs/at91/at91sam9261_serial.c | 73 +++++++++++++++++++++++++++++
cpu/arm926ejs/at91/at91sam9261_spi.c | 41 ++++++++++++++++
cpu/arm926ejs/at91/at91sam9263_serial.c | 73 +++++++++++++++++++++++++++++
cpu/arm926ejs/at91/at91sam9263_spi.c | 41 ++++++++++++++++
cpu/arm926ejs/at91/at91sam9rl_serial.c | 73 +++++++++++++++++++++++++++++
cpu/arm926ejs/at91/at91sam9rl_spi.c | 41 ++++++++++++++++
include/asm-arm/arch-at91/at91_common.h | 31 ++++++++++++
18 files changed, 656 insertions(+), 163 deletions(-)
create mode 100644 cpu/arm926ejs/at91/at91cap9_serial.c
create mode 100644 cpu/arm926ejs/at91/at91cap9_spi.c
create mode 100644 cpu/arm926ejs/at91/at91sam9260_serial.c
create mode 100644 cpu/arm926ejs/at91/at91sam9260_spi.c
create mode 100644 cpu/arm926ejs/at91/at91sam9261_serial.c
create mode 100644 cpu/arm926ejs/at91/at91sam9261_spi.c
create mode 100644 cpu/arm926ejs/at91/at91sam9263_serial.c
create mode 100644 cpu/arm926ejs/at91/at91sam9263_spi.c
create mode 100644 cpu/arm926ejs/at91/at91sam9rl_serial.c
create mode 100644 cpu/arm926ejs/at91/at91sam9rl_spi.c
create mode 100644 include/asm-arm/arch-at91/at91_common.h
diff --git a/board/afeb9260/afeb9260.c b/board/afeb9260/afeb9260.c
index 32445ab..e1d52ad 100644
--- a/board/afeb9260/afeb9260.c
+++ b/board/afeb9260/afeb9260.c
@@ -27,6 +27,7 @@
#include <asm/arch/at91sam9260.h>
#include <asm/arch/at91sam9260_matrix.h>
#include <asm/arch/at91sam9_smc.h>
+#include <asm/arch/at91_common.h>
#include <asm/arch/at91_pmc.h>
#include <asm/arch/at91_rstc.h>
#include <asm/arch/gpio.h>
@@ -47,27 +48,19 @@ DECLARE_GLOBAL_DATA_PTR;
static void afeb9260_serial_hw_init(void)
{
#ifdef CONFIG_USART0
- at91_set_A_periph(AT91_PIN_PB4, 1); /* TXD0 */
- at91_set_A_periph(AT91_PIN_PB5, 0); /* RXD0 */
- at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_US0);
+ at91_serial_hw_init(0);
#endif
#ifdef CONFIG_USART1
- at91_set_A_periph(AT91_PIN_PB6, 1); /* TXD1 */
- at91_set_A_periph(AT91_PIN_PB7, 0); /* RXD1 */
- at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_US1);
+ at91_serial_hw_init(1);
#endif
#ifdef CONFIG_USART2
- at91_set_A_periph(AT91_PIN_PB8, 1); /* TXD2 */
- at91_set_A_periph(AT91_PIN_PB9, 0); /* RXD2 */
- at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_US2);
+ at91_serial_hw_init(2);
#endif
#ifdef CONFIG_USART3 /* DBGU */
- at91_set_A_periph(AT91_PIN_PB14, 0); /* DRXD */
- at91_set_A_periph(AT91_PIN_PB15, 1); /* DTXD */
- at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_SYS);
+ at91_serial_hw_init(3);
#endif
}
@@ -104,19 +97,6 @@ static void afeb9260_nand_hw_init(void)
at91_set_gpio_output(AT91_PIN_PC14, 1);
}
-static void afeb9260_spi_hw_init(void)
-{
- at91_set_A_periph(AT91_PIN_PA3, 0); /* SPI0_NPCS0 */
- at91_set_B_periph(AT91_PIN_PC11, 0); /* SPI0_NPCS1 */
-
- at91_set_A_periph(AT91_PIN_PA0, 0); /* SPI0_MISO */
- at91_set_A_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */
- at91_set_A_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */
-
- /* Enable clock */
- at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_SPI0);
-}
-
#ifdef CONFIG_MACB
static void afeb9260_macb_hw_init(void)
{
@@ -205,7 +185,7 @@ int board_init(void)
#ifdef CONFIG_CMD_NAND
afeb9260_nand_hw_init();
#endif
- afeb9260_spi_hw_init();
+ at91_spi_hw_init();
#ifdef CONFIG_MACB
afeb9260_macb_hw_init();
#endif
diff --git a/board/atmel/at91cap9adk/at91cap9adk.c b/board/atmel/at91cap9adk/at91cap9adk.c
index f7d68b7..2d2cfe5 100644
--- a/board/atmel/at91cap9adk/at91cap9adk.c
+++ b/board/atmel/at91cap9adk/at91cap9adk.c
@@ -26,6 +26,7 @@
#include <asm/arch/at91cap9.h>
#include <asm/arch/at91cap9_matrix.h>
#include <asm/arch/at91sam9_smc.h>
+#include <asm/arch/at91_common.h>
#include <asm/arch/at91_pmc.h>
#include <asm/arch/at91_rstc.h>
#include <asm/arch/gpio.h>
@@ -50,27 +51,19 @@ DECLARE_GLOBAL_DATA_PTR;
static void at91cap9_serial_hw_init(void)
{
#ifdef CONFIG_USART0
- at91_set_A_periph(AT91_PIN_PA22, 1); /* TXD0 */
- at91_set_A_periph(AT91_PIN_PA23, 0); /* RXD0 */
- at91_sys_write(AT91_PMC_PCER, 1 << AT91CAP9_ID_US0);
+ at91_serial_hw_init(0);
#endif
#ifdef CONFIG_USART1
- at91_set_A_periph(AT91_PIN_PD0, 1); /* TXD1 */
- at91_set_A_periph(AT91_PIN_PD1, 0); /* RXD1 */
- at91_sys_write(AT91_PMC_PCER, 1 << AT91CAP9_ID_US1);
+ at91_serial_hw_init(1);
#endif
#ifdef CONFIG_USART2
- at91_set_A_periph(AT91_PIN_PD2, 1); /* TXD2 */
- at91_set_A_periph(AT91_PIN_PD3, 0); /* RXD2 */
- at91_sys_write(AT91_PMC_PCER, 1 << AT91CAP9_ID_US2);
+ at91_serial_hw_init(2);
#endif
#ifdef CONFIG_USART3 /* DBGU */
- at91_set_A_periph(AT91_PIN_PC30, 0); /* DRXD */
- at91_set_A_periph(AT91_PIN_PC31, 1); /* DTXD */
- at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_SYS);
+ at91_serial_hw_init(3);
#endif
}
@@ -163,20 +156,6 @@ static void at91cap9_nand_hw_init(void)
}
#endif
-#ifdef CONFIG_HAS_DATAFLASH
-static void at91cap9_spi_hw_init(void)
-{
- at91_set_B_periph(AT91_PIN_PA5, 0); /* SPI0_NPCS0 */
-
- at91_set_B_periph(AT91_PIN_PA0, 0); /* SPI0_MISO */
- at91_set_B_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */
- at91_set_B_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */
-
- /* Enable clock */
- at91_sys_write(AT91_PMC_PCER, 1 << AT91CAP9_ID_SPI0);
-}
-#endif
-
#ifdef CONFIG_MACB
static void at91cap9_macb_hw_init(void)
{
@@ -374,7 +353,7 @@ int board_init(void)
at91cap9_nand_hw_init();
#endif
#ifdef CONFIG_HAS_DATAFLASH
- at91cap9_spi_hw_init();
+ at91_spi_hw_init();
#endif
#ifdef CONFIG_MACB
at91cap9_macb_hw_init();
diff --git a/board/atmel/at91sam9260ek/at91sam9260ek.c b/board/atmel/at91sam9260ek/at91sam9260ek.c
index ef99b8b..b51e8dc 100644
--- a/board/atmel/at91sam9260ek/at91sam9260ek.c
+++ b/board/atmel/at91sam9260ek/at91sam9260ek.c
@@ -26,6 +26,7 @@
#include <asm/arch/at91sam9260.h>
#include <asm/arch/at91sam9260_matrix.h>
#include <asm/arch/at91sam9_smc.h>
+#include <asm/arch/at91_common.h>
#include <asm/arch/at91_pmc.h>
#include <asm/arch/at91_rstc.h>
#include <asm/arch/gpio.h>
@@ -46,27 +47,19 @@ DECLARE_GLOBAL_DATA_PTR;
static void at91sam9260ek_serial_hw_init(void)
{
#ifdef CONFIG_USART0
- at91_set_A_periph(AT91_PIN_PB4, 1); /* TXD0 */
- at91_set_A_periph(AT91_PIN_PB5, 0); /* RXD0 */
- at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_US0);
+ at91_serial_hw_init(0);
#endif
#ifdef CONFIG_USART1
- at91_set_A_periph(AT91_PIN_PB6, 1); /* TXD1 */
- at91_set_A_periph(AT91_PIN_PB7, 0); /* RXD1 */
- at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_US1);
+ at91_serial_hw_init(1);
#endif
#ifdef CONFIG_USART2
- at91_set_A_periph(AT91_PIN_PB8, 1); /* TXD2 */
- at91_set_A_periph(AT91_PIN_PB9, 0); /* RXD2 */
- at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_US2);
+ at91_serial_hw_init(2);
#endif
#ifdef CONFIG_USART3 /* DBGU */
- at91_set_A_periph(AT91_PIN_PB14, 0); /* DRXD */
- at91_set_A_periph(AT91_PIN_PB15, 1); /* DTXD */
- at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_SYS);
+ at91_serial_hw_init(3);
#endif
}
@@ -109,21 +102,6 @@ static void at91sam9260ek_nand_hw_init(void)
}
#endif
-#ifdef CONFIG_HAS_DATAFLASH
-static void at91sam9260ek_spi_hw_init(void)
-{
- at91_set_A_periph(AT91_PIN_PA3, 0); /* SPI0_NPCS0 */
- at91_set_B_periph(AT91_PIN_PC11, 0); /* SPI0_NPCS1 */
-
- at91_set_A_periph(AT91_PIN_PA0, 0); /* SPI0_MISO */
- at91_set_A_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */
- at91_set_A_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */
-
- /* Enable clock */
- at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_SPI0);
-}
-#endif
-
#ifdef CONFIG_MACB
static void at91sam9260ek_macb_hw_init(void)
{
@@ -222,7 +200,7 @@ int board_init(void)
at91sam9260ek_nand_hw_init();
#endif
#ifdef CONFIG_HAS_DATAFLASH
- at91sam9260ek_spi_hw_init();
+ at91_spi_hw_init();
#endif
#ifdef CONFIG_MACB
at91sam9260ek_macb_hw_init();
diff --git a/board/atmel/at91sam9261ek/at91sam9261ek.c b/board/atmel/at91sam9261ek/at91sam9261ek.c
index 14f236d..82dffde 100644
--- a/board/atmel/at91sam9261ek/at91sam9261ek.c
+++ b/board/atmel/at91sam9261ek/at91sam9261ek.c
@@ -26,6 +26,7 @@
#include <asm/arch/at91sam9261.h>
#include <asm/arch/at91sam9261_matrix.h>
#include <asm/arch/at91sam9_smc.h>
+#include <asm/arch/at91_common.h>
#include <asm/arch/at91_pmc.h>
#include <asm/arch/at91_rstc.h>
#include <asm/arch/gpio.h>
@@ -46,27 +47,19 @@ DECLARE_GLOBAL_DATA_PTR;
static void at91sam9261ek_serial_hw_init(void)
{
#ifdef CONFIG_USART0
- at91_set_A_periph(AT91_PIN_PC8, 1); /* TXD0 */
- at91_set_A_periph(AT91_PIN_PC9, 0); /* RXD0 */
- at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9261_ID_US0);
+ at91_serial_hw_init(0);
#endif
#ifdef CONFIG_USART1
- at91_set_A_periph(AT91_PIN_PC12, 1); /* TXD1 */
- at91_set_A_periph(AT91_PIN_PC13, 0); /* RXD1 */
- at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9261_ID_US1);
+ at91_serial_hw_init(1);
#endif
#ifdef CONFIG_USART2
- at91_set_A_periph(AT91_PIN_PC14, 1); /* TXD2 */
- at91_set_A_periph(AT91_PIN_PC15, 0); /* RXD2 */
- at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9261_ID_US2);
+ at91_serial_hw_init(2);
#endif
#ifdef CONFIG_USART3 /* DBGU */
- at91_set_A_periph(AT91_PIN_PA9, 0); /* DRXD */
- at91_set_A_periph(AT91_PIN_PA10, 1); /* DTXD */
- at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_SYS);
+ at91_serial_hw_init(3);
#endif
}
@@ -112,20 +105,6 @@ static void at91sam9261ek_nand_hw_init(void)
}
#endif
-#ifdef CONFIG_HAS_DATAFLASH
-static void at91sam9261ek_spi_hw_init(void)
-{
- at91_set_A_periph(AT91_PIN_PA3, 0); /* SPI0_NPCS0 */
-
- at91_set_A_periph(AT91_PIN_PA0, 0); /* SPI0_MISO */
- at91_set_A_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */
- at91_set_A_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */
-
- /* Enable clock */
- at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9261_ID_SPI0);
-}
-#endif
-
#ifdef CONFIG_DRIVER_DM9000
static void at91sam9261ek_dm9000_hw_init(void)
{
@@ -255,7 +234,7 @@ int board_init(void)
at91sam9261ek_nand_hw_init();
#endif
#ifdef CONFIG_HAS_DATAFLASH
- at91sam9261ek_spi_hw_init();
+ at91_spi_hw_init();
#endif
#ifdef CONFIG_DRIVER_DM9000
at91sam9261ek_dm9000_hw_init();
diff --git a/board/atmel/at91sam9263ek/at91sam9263ek.c b/board/atmel/at91sam9263ek/at91sam9263ek.c
index ebd4649..872a369 100644
--- a/board/atmel/at91sam9263ek/at91sam9263ek.c
+++ b/board/atmel/at91sam9263ek/at91sam9263ek.c
@@ -27,6 +27,7 @@
#include <asm/arch/at91sam9263.h>
#include <asm/arch/at91sam9263_matrix.h>
#include <asm/arch/at91sam9_smc.h>
+#include <asm/arch/at91_common.h>
#include <asm/arch/at91_pmc.h>
#include <asm/arch/at91_rstc.h>
#include <asm/arch/gpio.h>
@@ -49,27 +50,19 @@ DECLARE_GLOBAL_DATA_PTR;
static void at91sam9263ek_serial_hw_init(void)
{
#ifdef CONFIG_USART0
- at91_set_A_periph(AT91_PIN_PA26, 1); /* TXD0 */
- at91_set_A_periph(AT91_PIN_PA27, 0); /* RXD0 */
- at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_US0);
+ at91_serial_hw_init(0);
#endif
#ifdef CONFIG_USART1
- at91_set_A_periph(AT91_PIN_PD0, 1); /* TXD1 */
- at91_set_A_periph(AT91_PIN_PD1, 0); /* RXD1 */
- at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_US1);
+ at91_serial_hw_init(1);
#endif
#ifdef CONFIG_USART2
- at91_set_A_periph(AT91_PIN_PD2, 1); /* TXD2 */
- at91_set_A_periph(AT91_PIN_PD3, 0); /* RXD2 */
- at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_US2);
+ at91_serial_hw_init(2);
#endif
#ifdef CONFIG_USART3 /* DBGU */
- at91_set_A_periph(AT91_PIN_PC30, 0); /* DRXD */
- at91_set_A_periph(AT91_PIN_PC31, 1); /* DTXD */
- at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_SYS);
+ at91_serial_hw_init(3);
#endif
}
@@ -113,20 +106,6 @@ static void at91sam9263ek_nand_hw_init(void)
}
#endif
-#ifdef CONFIG_HAS_DATAFLASH
-static void at91sam9263ek_spi_hw_init(void)
-{
- at91_set_B_periph(AT91_PIN_PA5, 0); /* SPI0_NPCS0 */
-
- at91_set_B_periph(AT91_PIN_PA0, 0); /* SPI0_MISO */
- at91_set_B_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */
- at91_set_B_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */
-
- /* Enable clock */
- at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_SPI0);
-}
-#endif
-
#ifdef CONFIG_MACB
static void at91sam9263ek_macb_hw_init(void)
{
@@ -306,7 +285,7 @@ int board_init(void)
at91sam9263ek_nand_hw_init();
#endif
#ifdef CONFIG_HAS_DATAFLASH
- at91sam9263ek_spi_hw_init();
+ at91_spi_hw_init();
#endif
#ifdef CONFIG_MACB
at91sam9263ek_macb_hw_init();
diff --git a/board/atmel/at91sam9rlek/at91sam9rlek.c b/board/atmel/at91sam9rlek/at91sam9rlek.c
index b6fef9d..b42565f 100644
--- a/board/atmel/at91sam9rlek/at91sam9rlek.c
+++ b/board/atmel/at91sam9rlek/at91sam9rlek.c
@@ -26,6 +26,7 @@
#include <asm/arch/at91sam9rl.h>
#include <asm/arch/at91sam9rl_matrix.h>
#include <asm/arch/at91sam9_smc.h>
+#include <asm/arch/at91_common.h>
#include <asm/arch/at91_pmc.h>
#include <asm/arch/at91_rstc.h>
#include <asm/arch/gpio.h>
@@ -46,27 +47,19 @@ DECLARE_GLOBAL_DATA_PTR;
static void at91sam9rlek_serial_hw_init(void)
{
#ifdef CONFIG_USART0
- at91_set_A_periph(AT91_PIN_PA6, 1); /* TXD0 */
- at91_set_A_periph(AT91_PIN_PA7, 0); /* RXD0 */
- at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9RL_ID_US0);
+ at91_serial_hw_init(0);
#endif
#ifdef CONFIG_USART1
- at91_set_A_periph(AT91_PIN_PA11, 1); /* TXD1 */
- at91_set_A_periph(AT91_PIN_PA12, 0); /* RXD1 */
- at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9RL_ID_US1);
+ at91_serial_hw_init(1);
#endif
#ifdef CONFIG_USART2
- at91_set_A_periph(AT91_PIN_PA13, 1); /* TXD2 */
- at91_set_A_periph(AT91_PIN_PA14, 0); /* RXD2 */
- at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9RL_ID_US2);
+ at91_serial_hw_init(2);
#endif
#ifdef CONFIG_USART3 /* DBGU */
- at91_set_A_periph(AT91_PIN_PA21, 0); /* DRXD */
- at91_set_A_periph(AT91_PIN_PA22, 1); /* DTXD */
- at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_SYS);
+ at91_serial_hw_init(3);
#endif
}
@@ -112,20 +105,6 @@ static void at91sam9rlek_nand_hw_init(void)
}
#endif
-#ifdef CONFIG_HAS_DATAFLASH
-static void at91sam9rlek_spi_hw_init(void)
-{
- at91_set_A_periph(AT91_PIN_PA28, 0); /* SPI0_NPCS0 */
-
- at91_set_A_periph(AT91_PIN_PA25, 0); /* SPI0_MISO */
- at91_set_A_periph(AT91_PIN_PA26, 0); /* SPI0_MOSI */
- at91_set_A_periph(AT91_PIN_PA27, 0); /* SPI0_SPCK */
-
- /* Enable clock */
- at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9RL_ID_SPI);
-}
-#endif
-
#ifdef CONFIG_LCD
vidinfo_t panel_info = {
vl_col: 240,
@@ -228,7 +207,7 @@ int board_init(void)
at91sam9rlek_nand_hw_init();
#endif
#ifdef CONFIG_HAS_DATAFLASH
- at91sam9rlek_spi_hw_init();
+ at91_spi_hw_init();
#endif
#ifdef CONFIG_LCD
at91sam9rlek_lcd_hw_init();
diff --git a/cpu/arm926ejs/at91/Makefile b/cpu/arm926ejs/at91/Makefile
index 2d2a888..502271e 100644
--- a/cpu/arm926ejs/at91/Makefile
+++ b/cpu/arm926ejs/at91/Makefile
@@ -25,8 +25,25 @@ include $(TOPDIR)/config.mk
LIB = $(obj)lib$(SOC).a
+COBJS-$(CONFIG_AT91CAP9) += at91cap9_serial.o
+ifdef CONFIG_AT91SAM9260
+COBJS-y += at91sam9260_serial.o
+COBJS-$(CONFIG_HAS_DATAFLASH) += at91sam9260_spi.o
+endif
+ifdef CONFIG_AT91SAM9261
+COBJS-y += at91sam9261_serial.o
+COBJS-$(CONFIG_HAS_DATAFLASH) += at91sam9261_spi.o
+endif
+ifdef CONFIG_AT91SAM9263
+COBJS-y += at91sam9263_serial.o
+COBJS-$(CONFIG_HAS_DATAFLASH) += at91sam9263_spi.o
+endif
+ifdef CONFIG_AT91SAM9RL
+COBJS-y += at91sam9rl_serial.o
+COBJS-$(CONFIG_HAS_DATAFLASH) += at91sam9rl_spi.o
+endif
+COBJS-$(CONFIG_HAS_DATAFLASH) += spi.o
COBJS-y += timer.o
-COBJS-$(CONFIG_HAS_DATAFLASH) +=spi.o
COBJS-y += usb.o
SOBJS = lowlevel_init.o
diff --git a/cpu/arm926ejs/at91/at91cap9_serial.c b/cpu/arm926ejs/at91/at91cap9_serial.c
new file mode 100644
index 0000000..c7dbad9
--- /dev/null
+++ b/cpu/arm926ejs/at91/at91cap9_serial.c
@@ -0,0 +1,73 @@
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian.pop at leadtechdesign.com>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/at91_common.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/io.h>
+
+int at91_serial_hw_init(int uart)
+{
+ int err = -1;
+
+ switch(uart) {
+ case 0:
+#ifdef CONFIG_USART0
+ at91_set_A_periph(AT91_PIN_PA22, 1); /* TXD0 */
+ at91_set_A_periph(AT91_PIN_PA23, 0); /* RXD0 */
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91CAP9_ID_US0);
+ err = 0;
+#endif
+ break;
+ case 1:
+#ifdef CONFIG_USART1
+ at91_set_A_periph(AT91_PIN_PD0, 1); /* TXD1 */
+ at91_set_A_periph(AT91_PIN_PD1, 0); /* RXD1 */
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91CAP9_ID_US1);
+ err = 0;
+#endif
+ break;
+ case 2:
+#ifdef CONFIG_USART2
+ at91_set_A_periph(AT91_PIN_PD2, 1); /* TXD2 */
+ at91_set_A_periph(AT91_PIN_PD3, 0); /* RXD2 */
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91CAP9_ID_US2);
+ err = 0;
+#endif
+ break;
+ case 3:
+#ifdef CONFIG_USART3 /* DBGU */
+ at91_set_A_periph(AT91_PIN_PC30, 0); /* DRXD */
+ at91_set_A_periph(AT91_PIN_PC31, 1); /* DTXD */
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_SYS);
+ err = 0;
+#endif
+ break;
+ default:
+ printf(" uart%d configuration failled\n", err);
+ }
+
+ return err;
+}
diff --git a/cpu/arm926ejs/at91/at91cap9_spi.c b/cpu/arm926ejs/at91/at91cap9_spi.c
new file mode 100644
index 0000000..2ceb6a1
--- /dev/null
+++ b/cpu/arm926ejs/at91/at91cap9_spi.c
@@ -0,0 +1,41 @@
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian.pop at leadtechdesign.com>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/at91_common.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/io.h>
+
+void at91_spi_hw_init(void)
+{
+ at91_set_B_periph(AT91_PIN_PA5, 0); /* SPI0_NPCS0 */
+
+ at91_set_B_periph(AT91_PIN_PA0, 0); /* SPI0_MISO */
+ at91_set_B_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */
+ at91_set_B_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */
+
+ /* Enable clock */
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91CAP9_ID_SPI0);
+}
diff --git a/cpu/arm926ejs/at91/at91sam9260_serial.c b/cpu/arm926ejs/at91/at91sam9260_serial.c
new file mode 100644
index 0000000..4dd7c95
--- /dev/null
+++ b/cpu/arm926ejs/at91/at91sam9260_serial.c
@@ -0,0 +1,73 @@
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian.pop at leadtechdesign.com>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/at91_common.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/io.h>
+
+int at91_serial_hw_init(int uart)
+{
+ int err = -1;
+
+ switch(uart) {
+ case 0:
+#ifdef CONFIG_USART0
+ at91_set_A_periph(AT91_PIN_PB4, 1); /* TXD0 */
+ at91_set_A_periph(AT91_PIN_PB5, 0); /* RXD0 */
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_US0);
+ err = 0;
+#endif
+ break;
+ case 1:
+#ifdef CONFIG_USART1
+ at91_set_A_periph(AT91_PIN_PB6, 1); /* TXD1 */
+ at91_set_A_periph(AT91_PIN_PB7, 0); /* RXD1 */
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_US1);
+ err = 0;
+#endif
+ break;
+ case 2:
+#ifdef CONFIG_USART2
+ at91_set_A_periph(AT91_PIN_PB8, 1); /* TXD2 */
+ at91_set_A_periph(AT91_PIN_PB9, 0); /* RXD2 */
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_US2);
+ err = 0;
+#endif
+ break;
+ case 3:
+#ifdef CONFIG_USART3 /* DBGU */
+ at91_set_A_periph(AT91_PIN_PB14, 0); /* DRXD */
+ at91_set_A_periph(AT91_PIN_PB15, 1); /* DTXD */
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_SYS);
+ err = 0;
+#endif
+ break;
+ default:
+ printf(" uart%d configuration failled\n", err);
+ }
+
+ return err;
+}
diff --git a/cpu/arm926ejs/at91/at91sam9260_spi.c b/cpu/arm926ejs/at91/at91sam9260_spi.c
new file mode 100644
index 0000000..fba9699
--- /dev/null
+++ b/cpu/arm926ejs/at91/at91sam9260_spi.c
@@ -0,0 +1,42 @@
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian.pop at leadtechdesign.com>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/at91_common.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/io.h>
+
+void at91_spi_hw_init(void)
+{
+ at91_set_A_periph(AT91_PIN_PA3, 0); /* SPI0_NPCS0 */
+ at91_set_B_periph(AT91_PIN_PC11, 0); /* SPI0_NPCS1 */
+
+ at91_set_A_periph(AT91_PIN_PA0, 0); /* SPI0_MISO */
+ at91_set_A_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */
+ at91_set_A_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */
+
+ /* Enable clock */
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_SPI0);
+}
diff --git a/cpu/arm926ejs/at91/at91sam9261_serial.c b/cpu/arm926ejs/at91/at91sam9261_serial.c
new file mode 100644
index 0000000..bf3c450
--- /dev/null
+++ b/cpu/arm926ejs/at91/at91sam9261_serial.c
@@ -0,0 +1,73 @@
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian.pop at leadtechdesign.com>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/at91_common.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/io.h>
+
+int at91_serial_hw_init(int uart)
+{
+ int err = -1;
+
+ switch(uart) {
+ case 0:
+#ifdef CONFIG_USART0
+ at91_set_A_periph(AT91_PIN_PC8, 1); /* TXD0 */
+ at91_set_A_periph(AT91_PIN_PC9, 0); /* RXD0 */
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9261_ID_US0);
+ err = 0;
+#endif
+ break;
+ case 1:
+#ifdef CONFIG_USART1
+ at91_set_A_periph(AT91_PIN_PC12, 1); /* TXD1 */
+ at91_set_A_periph(AT91_PIN_PC13, 0); /* RXD1 */
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9261_ID_US1);
+ err = 0;
+#endif
+ break;
+ case 2:
+#ifdef CONFIG_USART2
+ at91_set_A_periph(AT91_PIN_PC14, 1); /* TXD2 */
+ at91_set_A_periph(AT91_PIN_PC15, 0); /* RXD2 */
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9261_ID_US2);
+ err = 0;
+#endif
+ break;
+ case 3:
+#ifdef CONFIG_USART3 /* DBGU */
+ at91_set_A_periph(AT91_PIN_PA9, 0); /* DRXD */
+ at91_set_A_periph(AT91_PIN_PA10, 1); /* DTXD */
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_SYS);
+ err = 0;
+#endif
+ break;
+ default:
+ printf(" uart%d configuration failled\n", err);
+ }
+
+ return err;
+}
diff --git a/cpu/arm926ejs/at91/at91sam9261_spi.c b/cpu/arm926ejs/at91/at91sam9261_spi.c
new file mode 100644
index 0000000..8eda600
--- /dev/null
+++ b/cpu/arm926ejs/at91/at91sam9261_spi.c
@@ -0,0 +1,41 @@
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian.pop at leadtechdesign.com>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/at91_common.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/io.h>
+
+void at91_spi_hw_init(void)
+{
+ at91_set_A_periph(AT91_PIN_PA3, 0); /* SPI0_NPCS0 */
+
+ at91_set_A_periph(AT91_PIN_PA0, 0); /* SPI0_MISO */
+ at91_set_A_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */
+ at91_set_A_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */
+
+ /* Enable clock */
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9261_ID_SPI0);
+}
diff --git a/cpu/arm926ejs/at91/at91sam9263_serial.c b/cpu/arm926ejs/at91/at91sam9263_serial.c
new file mode 100644
index 0000000..c20699a
--- /dev/null
+++ b/cpu/arm926ejs/at91/at91sam9263_serial.c
@@ -0,0 +1,73 @@
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian.pop at leadtechdesign.com>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/at91_common.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/io.h>
+
+int at91_serial_hw_init(int uart)
+{
+ int err = -1;
+
+ switch(uart) {
+ case 0:
+#ifdef CONFIG_USART0
+ at91_set_A_periph(AT91_PIN_PA26, 1); /* TXD0 */
+ at91_set_A_periph(AT91_PIN_PA27, 0); /* RXD0 */
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_US0);
+ err = 0;
+#endif
+ break;
+ case 1:
+#ifdef CONFIG_USART1
+ at91_set_A_periph(AT91_PIN_PD0, 1); /* TXD1 */
+ at91_set_A_periph(AT91_PIN_PD1, 0); /* RXD1 */
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_US1);
+ err = 0;
+#endif
+ break;
+ case 2:
+#ifdef CONFIG_USART2
+ at91_set_A_periph(AT91_PIN_PD2, 1); /* TXD2 */
+ at91_set_A_periph(AT91_PIN_PD3, 0); /* RXD2 */
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_US2);
+ err = 0;
+#endif
+ break;
+ case 3:
+#ifdef CONFIG_USART3 /* DBGU */
+ at91_set_A_periph(AT91_PIN_PC30, 0); /* DRXD */
+ at91_set_A_periph(AT91_PIN_PC31, 1); /* DTXD */
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_SYS);
+ err = 0;
+#endif
+ break;
+ default:
+ printf(" uart%d configuration failled\n", err);
+ }
+
+ return err;
+}
diff --git a/cpu/arm926ejs/at91/at91sam9263_spi.c b/cpu/arm926ejs/at91/at91sam9263_spi.c
new file mode 100644
index 0000000..b01541c
--- /dev/null
+++ b/cpu/arm926ejs/at91/at91sam9263_spi.c
@@ -0,0 +1,41 @@
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian.pop at leadtechdesign.com>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/at91_common.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/io.h>
+
+void at91_spi_hw_init(void)
+{
+ at91_set_B_periph(AT91_PIN_PA5, 0); /* SPI0_NPCS0 */
+
+ at91_set_B_periph(AT91_PIN_PA0, 0); /* SPI0_MISO */
+ at91_set_B_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */
+ at91_set_B_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */
+
+ /* Enable clock */
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_SPI0);
+}
diff --git a/cpu/arm926ejs/at91/at91sam9rl_serial.c b/cpu/arm926ejs/at91/at91sam9rl_serial.c
new file mode 100644
index 0000000..0effb8d
--- /dev/null
+++ b/cpu/arm926ejs/at91/at91sam9rl_serial.c
@@ -0,0 +1,73 @@
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian.pop at leadtechdesign.com>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/at91_common.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/io.h>
+
+int at91_serial_hw_init(int uart)
+{
+ int err = -1;
+
+ switch(uart) {
+ case 0:
+#ifdef CONFIG_USART0
+ at91_set_A_periph(AT91_PIN_PA6, 1); /* TXD0 */
+ at91_set_A_periph(AT91_PIN_PA7, 0); /* RXD0 */
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9RL_ID_US0);
+ err = 0;
+#endif
+ break;
+ case 1:
+#ifdef CONFIG_USART1
+ at91_set_A_periph(AT91_PIN_PA11, 1); /* TXD1 */
+ at91_set_A_periph(AT91_PIN_PA12, 0); /* RXD1 */
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9RL_ID_US1);
+ err = 0;
+#endif
+ break;
+ case 2:
+#ifdef CONFIG_USART2
+ at91_set_A_periph(AT91_PIN_PA13, 1); /* TXD2 */
+ at91_set_A_periph(AT91_PIN_PA14, 0); /* RXD2 */
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9RL_ID_US2);
+ err = 0;
+#endif
+ break;
+ case 3:
+#ifdef CONFIG_USART3 /* DBGU */
+ at91_set_A_periph(AT91_PIN_PA21, 0); /* DRXD */
+ at91_set_A_periph(AT91_PIN_PA22, 1); /* DTXD */
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_SYS);
+ err = 0;
+#endif
+ break;
+ default:
+ printf(" uart%d configuration failled\n", err);
+ }
+
+ return err;
+}
diff --git a/cpu/arm926ejs/at91/at91sam9rl_spi.c b/cpu/arm926ejs/at91/at91sam9rl_spi.c
new file mode 100644
index 0000000..8196092
--- /dev/null
+++ b/cpu/arm926ejs/at91/at91sam9rl_spi.c
@@ -0,0 +1,41 @@
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian.pop at leadtechdesign.com>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/at91_common.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/io.h>
+
+void at91_spi_hw_init(void)
+{
+ at91_set_A_periph(AT91_PIN_PA28, 0); /* SPI0_NPCS0 */
+
+ at91_set_A_periph(AT91_PIN_PA25, 0); /* SPI0_MISO */
+ at91_set_A_periph(AT91_PIN_PA26, 0); /* SPI0_MOSI */
+ at91_set_A_periph(AT91_PIN_PA27, 0); /* SPI0_SPCK */
+
+ /* Enable clock */
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9RL_ID_SPI);
+}
diff --git a/include/asm-arm/arch-at91/at91_common.h b/include/asm-arm/arch-at91/at91_common.h
new file mode 100644
index 0000000..507e4d3
--- /dev/null
+++ b/include/asm-arm/arch-at91/at91_common.h
@@ -0,0 +1,31 @@
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian.pop at leadtechdesign.com>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef AT91_COMMON_H
+#define AT91_COMMON_H
+
+int at91_serial_hw_init(int uart);
+void at91_spi_hw_init(void);
+
+#endif /* AT91_COMMON_H */
--
1.5.6.5
More information about the U-Boot
mailing list