[U-Boot] [PATCH] at91: add support for PM9263 board
Ilko Iliev
iliev at ronetix.at
Thu Nov 6 18:30:09 CET 2008
This patch adds support for the PM9263 board of Ronetix GmbH (www.ronetix.at)
Signed-off-by: Ilko Iliev <iliev at ronetix.at>
---
MAKEALL | 1 +
Makefile | 3 +
board/ronetix/pm9263/Makefile | 60 ++++
board/ronetix/pm9263/config.mk | 1 +
board/ronetix/pm9263/pm9263.c | 504 +++++++++++++++++++++++++++
board/ronetix/pm9263/pm9263_led.c | 66 ++++
board/ronetix/pm9263/pm9263_lowlevel_init.S | 376 ++++++++++++++++++++
board/ronetix/pm9263/pm9263_nand.c | 79 +++++
board/ronetix/pm9263/pm9263_partition.c | 47 +++
include/configs/pm9263.h | 279 +++++++++++++++
tools/Makefile | 3 +
tools/logos/ronetix.bmp | Bin 0 -> 5638 bytes
12 files changed, 1419 insertions(+), 0 deletions(-)
create mode 100644 board/ronetix/pm9263/Makefile
create mode 100644 board/ronetix/pm9263/config.mk
create mode 100644 board/ronetix/pm9263/pm9263.c
create mode 100644 board/ronetix/pm9263/pm9263_led.c
create mode 100644 board/ronetix/pm9263/pm9263_lowlevel_init.S
create mode 100644 board/ronetix/pm9263/pm9263_nand.c
create mode 100644 board/ronetix/pm9263/pm9263_partition.c
create mode 100644 include/configs/pm9263.h
create mode 100644 tools/logos/ronetix.bmp
diff --git a/MAKEALL b/MAKEALL
index 1f56ac5..a1df37b 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -545,6 +545,7 @@ LIST_at91=" \
kb9202 \
mp2usb \
m501sk \
+ pm9263 \
"
#########################################################################
diff --git a/Makefile b/Makefile
index 983a3cd..7d43159 100644
--- a/Makefile
+++ b/Makefile
@@ -2561,6 +2561,9 @@ at91cap9adk_config : unconfig
at91sam9260ek_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm926ejs at91sam9260ek atmel at91
+pm9263_config : unconfig
+ @$(MKCONFIG) $(@:_config=) arm arm926ejs pm9263 ronetix at91
+
########################################################################
## ARM Integrator boards - see doc/README-integrator for more info.
integratorap_config \
diff --git a/board/ronetix/pm9263/Makefile b/board/ronetix/pm9263/Makefile
new file mode 100644
index 0000000..342bfca
--- /dev/null
+++ b/board/ronetix/pm9263/Makefile
@@ -0,0 +1,60 @@
+#
+# (C) Copyright 2003-2008
+# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
+#
+# (C) Copyright 2008
+# Stelian Pop <stelian.pop at leadtechdesign.com>
+# Lead Tech Design <www.leadtechdesign.com>
+# Ilko Iliev <www.ronetix.at>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS-y += pm9263.o
+COBJS-y += pm9263_led.o
+COBJS-y += pm9263_partition.o
+COBJS-$(CONFIG_CMD_NAND) += pm9263_nand.o
+
+SOBJS := pm9263_lowlevel_init.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS-y) $(SOBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $@, $(OBJS))
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak $(obj).depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/ronetix/pm9263/config.mk b/board/ronetix/pm9263/config.mk
new file mode 100644
index 0000000..ff2cfd1
--- /dev/null
+++ b/board/ronetix/pm9263/config.mk
@@ -0,0 +1 @@
+TEXT_BASE = 0x23f00000
diff --git a/board/ronetix/pm9263/pm9263.c b/board/ronetix/pm9263/pm9263.c
new file mode 100644
index 0000000..a64fa4b
--- /dev/null
+++ b/board/ronetix/pm9263/pm9263.c
@@ -0,0 +1,504 @@
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian.pop at leadtechdesign.com>
+ * Lead Tech Design <www.leadtechdesign.com>
+ * Ilko Iliev <www.ronetix.at>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/sizes.h>
+#include <asm/arch/at91sam9263.h>
+#include <asm/arch/at91sam9263_matrix.h>
+#include <asm/arch/at91sam9_smc.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/at91_rstc.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/io.h>
+#include <asm/arch/hardware.h>
+#include <lcd.h>
+#include <atmel_lcdc.h>
+#include <dataflash.h>
+#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB)
+#include <net.h>
+#endif
+#include <netdev.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* ------------------------------------------------------------------------- */
+/*
+ * Miscelaneous platform dependent initialisations
+ */
+
+static void pm9263_serial_hw_init(void)
+{
+#ifdef CONFIG_USART0
+ at91_set_A_periph(AT91_PIN_PA26, 1); /* TXD0 */
+ at91_set_A_periph(AT91_PIN_PA27, 0); /* RXD0 */
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US0);
+#endif
+
+#ifdef CONFIG_USART1
+ at91_set_A_periph(AT91_PIN_PD0, 1); /* TXD1 */
+ at91_set_A_periph(AT91_PIN_PD1, 0); /* RXD1 */
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US1);
+#endif
+
+#ifdef CONFIG_USART2
+ at91_set_A_periph(AT91_PIN_PD2, 1); /* TXD2 */
+ at91_set_A_periph(AT91_PIN_PD3, 0); /* RXD2 */
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US2);
+#endif
+
+#ifdef CONFIG_USART3 /* DBGU */
+ at91_set_A_periph(AT91_PIN_PC30, 0); /* DRXD */
+ at91_set_A_periph(AT91_PIN_PC31, 1); /* DTXD */
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_SYS);
+#endif
+}
+
+#ifdef CONFIG_CMD_NAND
+static void pm9263_nand_hw_init(void)
+{
+ unsigned long csa;
+
+ /* Enable CS3 */
+ csa = at91_sys_read(AT91_MATRIX_EBI0CSA);
+ at91_sys_write(AT91_MATRIX_EBI0CSA,
+ csa | AT91_MATRIX_EBI0_CS3A_SMC_SMARTMEDIA);
+
+ /* Configure SMC CS3 for NAND/SmartMedia */
+ at91_sys_write(AT91_SMC_SETUP(3),
+ AT91_SMC_NWESETUP_(1) | AT91_SMC_NCS_WRSETUP_(0) |
+ AT91_SMC_NRDSETUP_(1) | AT91_SMC_NCS_RDSETUP_(0));
+ at91_sys_write(AT91_SMC_PULSE(3),
+ AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(3) |
+ AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3));
+ at91_sys_write(AT91_SMC_CYCLE(3),
+ AT91_SMC_NWECYCLE_(5) | AT91_SMC_NRDCYCLE_(5));
+ at91_sys_write(AT91_SMC_MODE(3),
+ AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
+ AT91_SMC_EXNWMODE_DISABLE |
+#ifdef CFG_NAND_DBW_16
+ AT91_SMC_DBW_16 |
+#else /* CFG_NAND_DBW_8 */
+ AT91_SMC_DBW_8 |
+#endif
+ AT91_SMC_TDF_(2));
+
+ /* Configure RDY/BSY */
+ at91_set_gpio_input(AT91_PIN_PB30, 1);
+
+ /* Enable NandFlash */
+ at91_set_gpio_output(AT91_PIN_PD15, 1);
+}
+#endif
+
+#ifdef CONFIG_HAS_DATAFLASH
+static void pm9263_spi_hw_init(void)
+{
+ at91_set_B_periph(AT91_PIN_PA5, 0); /* SPI0_NPCS0 */
+
+ at91_set_B_periph(AT91_PIN_PA0, 0); /* SPI0_MISO */
+ at91_set_B_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */
+ at91_set_B_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */
+
+ /* Enable clock */
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_SPI0);
+}
+#endif
+
+#ifdef CONFIG_MACB
+static void pm9263_macb_hw_init(void)
+{
+ /* Enable clock */
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_EMAC);
+
+ /*
+ * Disable pull-up on:
+ * RXDV (PC25) => PHY normal mode (not Test mode)
+ * ERX0 (PE25) => PHY ADDR0
+ * ERX1 (PE26) => PHY ADDR1 => PHYADDR = 0x0
+ *
+ * PHY has internal pull-down
+ */
+ writel(pin_to_mask(AT91_PIN_PC25),
+ pin_to_controller(AT91_PIN_PC0) + PIO_PUDR);
+ writel(pin_to_mask(AT91_PIN_PE25) |
+ pin_to_mask(AT91_PIN_PE26),
+ pin_to_controller(AT91_PIN_PE0) + PIO_PUDR);
+
+
+ /* Re-enable pull-up */
+ writel(pin_to_mask(AT91_PIN_PC25),
+ pin_to_controller(AT91_PIN_PC0) + PIO_PUER);
+ writel(pin_to_mask(AT91_PIN_PE25) |
+ pin_to_mask(AT91_PIN_PE26),
+ pin_to_controller(AT91_PIN_PE0) + PIO_PUER);
+
+ at91_set_A_periph(AT91_PIN_PE21, 0); /* ETXCK_EREFCK */
+ at91_set_B_periph(AT91_PIN_PC25, 0); /* ERXDV */
+ at91_set_A_periph(AT91_PIN_PE25, 0); /* ERX0 */
+ at91_set_A_periph(AT91_PIN_PE26, 0); /* ERX1 */
+ at91_set_A_periph(AT91_PIN_PE27, 0); /* ERXER */
+ at91_set_A_periph(AT91_PIN_PE28, 0); /* ETXEN */
+ at91_set_A_periph(AT91_PIN_PE23, 0); /* ETX0 */
+ at91_set_A_periph(AT91_PIN_PE24, 0); /* ETX1 */
+ at91_set_A_periph(AT91_PIN_PE30, 0); /* EMDIO */
+ at91_set_A_periph(AT91_PIN_PE29, 0); /* EMDC */
+
+#ifndef CONFIG_RMII
+ at91_set_A_periph(AT91_PIN_PE22, 0); /* ECRS */
+ at91_set_B_periph(AT91_PIN_PC26, 0); /* ECOL */
+ at91_set_B_periph(AT91_PIN_PC22, 0); /* ERX2 */
+ at91_set_B_periph(AT91_PIN_PC23, 0); /* ERX3 */
+ at91_set_B_periph(AT91_PIN_PC27, 0); /* ERXCK */
+ at91_set_B_periph(AT91_PIN_PC20, 0); /* ETX2 */
+ at91_set_B_periph(AT91_PIN_PC21, 0); /* ETX3 */
+ at91_set_B_periph(AT91_PIN_PC24, 0); /* ETXER */
+#endif
+
+}
+#endif
+
+#ifdef CONFIG_USB_OHCI_NEW
+static void pm9263_uhp_hw_init(void)
+{
+ /* Enable VBus on UHP ports */
+ at91_set_gpio_output(AT91_PIN_PA21, 0);
+ at91_set_gpio_output(AT91_PIN_PA24, 0);
+}
+#endif
+
+#ifdef CONFIG_LCD
+vidinfo_t panel_info = {
+ vl_col: 240,
+ vl_row: 320,
+ vl_clk: 4965000,
+ vl_sync: ATMEL_LCDC_INVLINE_INVERTED |
+ ATMEL_LCDC_INVFRAME_INVERTED,
+ vl_bpix: 3,
+ vl_tft: 1,
+ vl_hsync_len: 5,
+ vl_left_margin: 1,
+ vl_right_margin:33,
+ vl_vsync_len: 1,
+ vl_upper_margin:1,
+ vl_lower_margin:0,
+ mmio: AT91SAM9263_LCDC_BASE,
+};
+
+void lcd_enable(void)
+{
+ at91_set_gpio_value(AT91_PIN_PA22, 1); /* power up */
+}
+
+void lcd_disable(void)
+{
+ at91_set_gpio_value(AT91_PIN_PA22, 0); /* power down */
+}
+
+#ifdef LCD_IN_PSRAM
+
+#define PSRAM_CRE_PIN AT91_PIN_PB29
+#define PSRAM_CTRL_REG (PHYS_PSRAM + PHYS_PSRAM_SIZE - 2)
+
+/* Initialize the PSRAM memory */
+static int pm9263_lcd_hw_psram_init(void)
+{
+volatile uint16_t *p;
+volatile uint16_t x;
+
+ /* setup PB29 as output */
+ at91_set_gpio_output(PSRAM_CRE_PIN, 1);
+
+ at91_set_gpio_value(PSRAM_CRE_PIN, 0); /* set PSRAM_CRE_PIN to '0' */
+
+ p = (volatile uint16_t *) PSRAM_CTRL_REG;
+
+ /* PSRAM: write BCR */
+ x = *p; /* mem r16 0x703ffffe 1 */
+ x = *p; /* mem r16 0x703ffffe 1 */
+ *p = 1; /* mem w16 0x703ffffe 1 ; 0 for RCR, 1 for BCR */
+ *p = 0x9d4f; /* write the BCR */
+
+ /* write RCR of the PSRAM */
+ p = (volatile uint16_t *) PSRAM_CTRL_REG;
+ x = *p; /* mem r16 0x703ffffe 1 */
+ x = *p; /* mem r16 0x703ffffe 1 */
+ *p = 0; /* mem w16 0x703ffffe 0 ; 0 for RCR, 1 for BCR */
+
+ *p = 0x90; /* set RCR; 0x10 - async mode, 0x90 - page mode */
+
+ /* test to see if the PSRAM is MT45W2M16A or MT45W2M16B
+ MT45W2M16B - CRE must be 0
+ MT45W2M16A - CRE must be 1
+ */
+ p = (volatile uint16_t *) PHYS_PSRAM;
+ p[0] = 0x1234;
+ p[1] = 0x5678;
+
+ /* test if the chip is MT45W2M16B */
+ if ( (p[0] != 0x1234) || (p[1] != 0x5678) )
+ {
+ /* try with CRE=1 (MT45W2M16A) */
+ at91_set_gpio_value(PSRAM_CRE_PIN, 1); /* set PSRAM_CRE_PIN to '1' */
+
+ /* write RCR of the PSRAM */
+ p = (volatile uint16_t *) PSRAM_CTRL_REG;
+ x = *p; /* mem r16 0x703ffffe 1 */
+ x = *p; /* mem r16 0x703ffffe 1 */
+ *p = 0; /* mem w16 0x703ffffe 0 ; 0 for RCR, 1 for BCR */
+
+ *p = 0x90; /* set RCR; 0x10 - async mode, 0x90 - page mode */
+
+ p = (volatile uint16_t *) PHYS_PSRAM;
+ p[0] = 0x1234;
+ p[1] = 0x5678;
+ if ( (p[0] != 0x1234) || (p[1] != 0x5678) )
+ return 1;
+
+ }
+ return 0;
+}
+#endif
+
+static void pm9263_lcd_hw_init(void)
+{
+ at91_set_A_periph(AT91_PIN_PC1, 0); /* LCDHSYNC */
+ at91_set_A_periph(AT91_PIN_PC2, 0); /* LCDDOTCK */
+ at91_set_A_periph(AT91_PIN_PC3, 0); /* LCDDEN */
+ at91_set_B_periph(AT91_PIN_PB9, 0); /* LCDCC */
+ at91_set_A_periph(AT91_PIN_PC6, 0); /* LCDD2 */
+ at91_set_A_periph(AT91_PIN_PC7, 0); /* LCDD3 */
+ at91_set_A_periph(AT91_PIN_PC8, 0); /* LCDD4 */
+ at91_set_A_periph(AT91_PIN_PC9, 0); /* LCDD5 */
+ at91_set_A_periph(AT91_PIN_PC10, 0); /* LCDD6 */
+ at91_set_A_periph(AT91_PIN_PC11, 0); /* LCDD7 */
+ at91_set_A_periph(AT91_PIN_PC14, 0); /* LCDD10 */
+ at91_set_A_periph(AT91_PIN_PC15, 0); /* LCDD11 */
+ at91_set_A_periph(AT91_PIN_PC16, 0); /* LCDD12 */
+ at91_set_B_periph(AT91_PIN_PC12, 0); /* LCDD13 */
+ at91_set_A_periph(AT91_PIN_PC18, 0); /* LCDD14 */
+ at91_set_A_periph(AT91_PIN_PC19, 0); /* LCDD15 */
+ at91_set_A_periph(AT91_PIN_PC22, 0); /* LCDD18 */
+ at91_set_A_periph(AT91_PIN_PC23, 0); /* LCDD19 */
+ at91_set_A_periph(AT91_PIN_PC24, 0); /* LCDD20 */
+ at91_set_B_periph(AT91_PIN_PC17, 0); /* LCDD21 */
+ at91_set_A_periph(AT91_PIN_PC26, 0); /* LCDD22 */
+ at91_set_A_periph(AT91_PIN_PC27, 0); /* LCDD23 */
+
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_LCDC);
+
+ /* Power Control */
+ at91_set_gpio_output(AT91_PIN_PA22, 1);
+ at91_set_gpio_value(AT91_PIN_PA22, 0); /* power down */
+
+#ifdef LCD_IN_PSRAM
+ /* initialize te PSRAM */
+ int stat = pm9263_lcd_hw_psram_init();
+
+ gd->fb_base = (stat == 0) ? PHYS_PSRAM : AT91SAM9263_SRAM0_BASE;
+#else
+ gd->fb_base = AT91SAM9263_SRAM0_BASE;
+#endif
+
+}
+
+#ifdef CONFIG_LCD_INFO
+#include <nand.h>
+#include <version.h>
+
+extern flash_info_t flash_info[];
+
+void lcd_show_board_info(void)
+{
+ ulong dram_size, nand_size, flash_size, dataflash_size;
+ int i;
+ char temp[32];
+
+ lcd_printf ("%s\n", U_BOOT_VERSION);
+ lcd_printf ("(C) 2008 Ronetix GmbH\n");
+ lcd_printf ("support at ronetix.at\n");
+ lcd_printf ("%s CPU at %s MHz",
+ AT91_CPU_NAME,
+ strmhz(temp, AT91_MAIN_CLOCK));
+
+ dram_size = 0;
+ for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++)
+ dram_size += gd->bd->bi_dram[i].size;
+
+ nand_size = 0;
+ for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++)
+ nand_size += nand_info[i].size;
+
+ flash_size = 0;
+ for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++)
+ flash_size += flash_info[i].size;
+
+ dataflash_size = 0;
+ for (i = 0; i < CONFIG_SYS_MAX_DATAFLASH_BANKS; i++)
+ dataflash_size += (unsigned int) dataflash_info[i].Device.pages_number *
+ dataflash_info[i].Device.pages_size;
+
+ lcd_printf ("%ld MB SDRAM, %ld MB NAND\n%ld MB NOR Flash\n"
+ "4 MB PSRAM, %ld MB DataFlash\n",
+ dram_size >> 20,
+ nand_size >> 20,
+ flash_size >> 20,
+ dataflash_size >> 20);
+}
+#endif /* CONFIG_LCD_INFO */
+
+#endif /* CONFIG_LCD */
+
+int board_init(void)
+{
+ /* Enable Ctrlc */
+ console_init_f();
+
+ at91_sys_write(AT91_PMC_PCER,
+ (1 << AT91SAM9263_ID_PIOA) |
+ (1 << AT91SAM9263_ID_PIOCDE) |
+ (1 << AT91SAM9263_ID_PIOB));
+
+ /* PB27 enables the 50MHz oscillator for Ethernet PHY
+ 1 - enable
+ 0 - disable */
+ at91_set_gpio_output(AT91_PIN_PB27, 1);
+ at91_set_gpio_value(AT91_PIN_PB27, 1); /* 1- enable, 0 - disable */
+
+ /* arch number of AT91SAM9263EK-Board */
+ gd->bd->bi_arch_number = MACH_TYPE_PM9263;
+
+ /* adress of boot parameters */
+ gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
+
+ pm9263_serial_hw_init();
+#ifdef CONFIG_CMD_NAND
+ pm9263_nand_hw_init();
+#endif
+#ifdef CONFIG_HAS_DATAFLASH
+ pm9263_spi_hw_init();
+#endif
+#ifdef CONFIG_MACB
+ pm9263_macb_hw_init();
+#endif
+#ifdef CONFIG_USB_OHCI_NEW
+ pm9263_uhp_hw_init();
+#endif
+#ifdef CONFIG_LCD
+ pm9263_lcd_hw_init();
+#endif
+ return 0;
+}
+
+int dram_init(void)
+{
+ gd->bd->bi_dram[0].start = PHYS_SDRAM;
+ gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE;
+ return 0;
+}
+
+#ifdef CONFIG_RESET_PHY_R
+void reset_phy(void)
+{
+#ifdef CONFIG_MACB
+ /*
+ * Initialize ethernet HW addr prior to starting Linux,
+ * needed for nfsroot
+ */
+ eth_init(gd->bd);
+#endif
+}
+#endif
+
+int board_eth_init(bd_t *bis)
+{
+ int rc = 0;
+#ifdef CONFIG_MACB
+ rc = macb_eth_initialize(0, (void *)AT91_BASE_EMAC, 0x01);
+#endif
+ return rc;
+}
+
+#ifdef CONFIG_DISPLAY_BOARDINFO
+int checkboard (void)
+{
+ char *ss;
+
+ uint32_t reg, diva, divb, mula, mulb;
+ uint32_t val, mdiv, pres, usbdiv, crystal;
+ char buf[32];
+
+ reg = at91_sys_read(AT91_CKGR_PLLAR);
+ mula = ((reg >> 16) & 0x7FF) + 1;
+ diva = reg & 0xFF;
+
+ reg = at91_sys_read(AT91_CKGR_PLLBR);
+ mulb = ((reg >> 16) & 0x7FF) + 1;
+ divb = reg & 0xFF;
+ usbdiv = (reg >> 28) & 0x3;
+
+ reg = at91_sys_read(AT91_PMC_MCKR);
+ mdiv = (reg >> 8) & 3;
+ pres = (reg >> 2) & 7;
+
+#ifdef USE_CALCULATED_CRYSTAL_FREQ
+ reg = at91_sys_read(AT91_CKGR_MCFR);
+ val = (reg & 0xFFFF) * AT91_SLOW_CLOCK / 16;
+#else
+ crystal = PM9263_CRYSTAL;
+#endif
+
+ printf ("Board : Ronetix PM9263\n");
+ printf ("Crystal frequency: %8s MHz\n", strmhz(buf,crystal));
+
+ val = (crystal * mula) / diva;
+ printf ("CPU clock : %8s MHz\n", strmhz(buf, val));
+
+ val /= (1 << pres);
+ val /= (1 << mdiv);
+ printf ("Master clock : %8s MHz\n", strmhz(buf, val));
+
+ val = (crystal * mulb) / divb;
+ val /= (1 << usbdiv);
+ printf ("USB clock : %8s MHz\n", strmhz(buf, val) );
+
+ switch (gd->fb_base) {
+ case PHYS_PSRAM:
+ ss = "(PSRAM)";
+ break;
+
+ case AT91SAM9263_SRAM0_BASE:
+ ss = "(Internal SRAM)";
+ break;
+
+ default:
+ ss = "";
+ break;
+ }
+ printf("Video memory : 0x%08lX %s\n", gd->fb_base, ss );
+
+ printf ("\n");
+ return 0;
+}
+#endif
diff --git a/board/ronetix/pm9263/pm9263_led.c b/board/ronetix/pm9263/pm9263_led.c
new file mode 100644
index 0000000..122e23a
--- /dev/null
+++ b/board/ronetix/pm9263/pm9263_led.c
@@ -0,0 +1,66 @@
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian.pop at leadtechdesign.com>
+ * Lead Tech Design <www.leadtechdesign.com>
+ * Ilko Iliev <www.ronetix.at>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/at91sam9263.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/io.h>
+
+#define RED_LED AT91_PIN_PB7 /* this is the power led */
+#define GREEN_LED AT91_PIN_PB8 /* this is the user1 led */
+
+void red_LED_on(void)
+{
+ at91_set_gpio_value(RED_LED, 1);
+}
+
+void red_LED_off(void)
+{
+ at91_set_gpio_value(RED_LED, 0);
+}
+
+void green_LED_on(void)
+{
+ at91_set_gpio_value(GREEN_LED, 0);
+}
+
+void green_LED_off(void)
+{
+ at91_set_gpio_value(GREEN_LED, 1);
+}
+
+void coloured_LED_init(void)
+{
+ /* Enable clock */
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_PIOB |
+ 1 << AT91SAM9263_ID_PIOCDE);
+
+ at91_set_gpio_output(RED_LED, 1);
+ at91_set_gpio_output(GREEN_LED, 1);
+
+ at91_set_gpio_value(RED_LED, 0);
+ at91_set_gpio_value(GREEN_LED, 1);
+}
diff --git a/board/ronetix/pm9263/pm9263_lowlevel_init.S b/board/ronetix/pm9263/pm9263_lowlevel_init.S
new file mode 100644
index 0000000..e99fcc0
--- /dev/null
+++ b/board/ronetix/pm9263/pm9263_lowlevel_init.S
@@ -0,0 +1,376 @@
+/*
+ * Memory Setup stuff - taken from blob memsetup.S
+ *
+ * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw at its.tudelft.nl) and
+ * Jan-Derk Bakker (J.D.Bakker at its.tudelft.nl)
+ *
+ * Modified for the Ronetix PM9263 board by Ilko Iliev (www.ronetix.at)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <version.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/at91_pio.h>
+
+#ifndef CONFIG_SKIP_LOWLEVEL_INIT
+
+#define SDRAM 0x20000000 /* address of the SDRAM */
+
+/* clocks */
+#define MOR_VAL 0x00002001 /* CKGR_MOR - enable main osc. */
+#define PLLAR_VAL (0x2000BF00 | ((MASTER_PLL_MUL - 1) << 16) | (MASTER_PLL_DIV))
+/* #define PLLAR_VAL 0x200CBF01 */ /* 239.616000 MHz for PCK */
+#define PLLBR_VAL 0x10483E0E /* 48.054857 MHz for USB) */
+
+#define MCKR1_VAL 0x00000100 /* PCK/2 = MCK Master Clock from PLLA*/
+#define MCKR2_VAL 0x00000102 /* PCK/2 = MCK Master Clock from PLLA*/
+
+#define AT91_PIOD_PDR (AT91_BASE_SYS + AT91_PIOD + PIO_PDR)
+#define AT91_PIOD_PPUDR (AT91_BASE_SYS + AT91_PIOD + PIO_PUDR)
+#define AT91_PIOD_ASR (AT91_BASE_SYS + AT91_PIOD + PIO_ASR)
+#define AT91_CCFG_EBI0CSA (0xFFFFED20) /* (CCFG) EBI0 Chip Select */
+#define AT91_CCFG_EBI1CSA (0xFFFFED24) /* (CCFG) EBI1 Chip Select */
+
+#define AT91_SMC0_CTRL0 (0xFFFFE40C) /* (SMC0) Control Register for CS 0 */
+#define AT91_SMC0_CYCLE0 (0xFFFFE408) /* (SMC0) Cycle Register for CS 0 */
+#define AT91_SMC0_SETUP0 (0xFFFFE400) /* (SMC0) Setup Register for CS 0 */
+#define AT91_SMC0_PULSE0 (0xFFFFE404) /* (SMC0) Pulse Register for CS 0 */
+
+#define AT91_SMC1_CTRL0 (0xFFFFEA0C) /* (SMC1) Control Register for CS 0 */
+#define AT91_SMC1_CYCLE0 (0xFFFFEA08) /* (SMC1) Cycle Register for CS 0 */
+#define AT91_SMC1_SETUP0 (0xFFFFEA00) /* (SMC1) Setup Register for CS 0 */
+#define AT91_SMC1_PULSE0 (0xFFFFEA04) /* (SMC1) Pulse Register for CS 0 */
+
+#define AT91_SDRAMC0_CR (0xFFFFE208) /* (SDRAMC0) SDRAM Configuration Reg.*/
+#define AT91_SDRAMC0_MR (0xFFFFE200) /* (SDRAMC0) SDRAM Mode Register */
+#define AT91_SDRAMC0_MDR (0xFFFFE224) /* (SDRAMC0) SDRAM Memory Device Reg.*/
+#define AT91_SDRAMC0_TR (0xFFFFE204) /* (SDRAMC0) SDRAM Refresh Timer Reg.*/
+
+#define AT91_RSTC_RMR (0xFFFFFD08) /* (RSTC) Reset Mode Register */
+
+#define PIOD_PDR_VAL1 0xFFFF0000 /* define PDC[31:16] as DATA[31:16] */
+#define PIOD_PPUDR_VAL 0xFFFF0000 /* no pull-up for D[31:16] */
+#define MATRIX_EBI0CSA_VAL 0x0001010A /* EBI0_CSA, CS1 SDRAM, CS3 NAND Flash,
+ 3.3V memories */
+#define MATRIX_EBI1CSA_VAL 0x00010100 /* EBI1_CSA, 3.3v, no pull-ups*/
+
+/* SDRAM */
+#define SDRC_MR_VAL1 0 /* SDRAMC_MR Mode register */
+#define SDRC_TR_VAL1 0x13C /* SDRAMC_TR - Refresh Timer register*/
+/*#define SDRC_CR_VAL 0x85237279*/ /* SDRAMC_CR - Configuration register*/
+/*#define SDRC_CR_VAL 0x85227259 CL2 */
+#define SDRC_CR_VAL 0x85227279 /*CL3*/
+#define SDRC_MDR_VAL 0 /* Memory Device Register -> SDRAM */
+#define SDRC_MR_VAL2 0x00000002 /* SDRAMC_MR */
+#define SDRAM_VAL1 0 /* SDRAM_BASE */
+#define SDRC_MR_VAL3 4 /* SDRC_MR */
+#define SDRAM_VAL2 0 /* SDRAM_BASE */
+#define SDRAM_VAL3 0 /* SDRAM_BASE */
+#define SDRAM_VAL4 0 /* SDRAM_BASE */
+#define SDRAM_VAL5 0 /* SDRAM_BASE */
+#define SDRAM_VAL6 0 /* SDRAM_BASE */
+#define SDRAM_VAL7 0 /* SDRAM_BASE */
+#define SDRAM_VAL8 0 /* SDRAM_BASE */
+#define SDRAM_VAL9 0 /* SDRAM_BASE */
+#define SDRC_MR_VAL4 3 /* SDRC_MR */
+#define SDRAM_VAL10 0 /* SDRAM_BASE */
+#define SDRC_MR_VAL5 0 /* SDRC_MR */
+#define SDRAM_VAL11 0 /* SDRAM_BASE */
+#define SDRC_TR_VAL2 1200 /* SDRAM_TR */
+#define SDRAM_VAL12 0 /* SDRAM_BASE */
+
+/* setup SMC0, CS0 (NOR Flash) - 16-bit, 15 WS */
+#define SMC0_SETUP0_VAL 0x0A0A0A0A /* SMC_SETUP */
+#define SMC0_PULSE0_VAL 0x0B0B0B0B /* SMC_PULSE */
+#define SMC0_CYCLE0_VAL 0x00160016 /* SMC_CYCLE */
+#define SMC0_CTRL0_VAL 0x00161003 /* SMC_MODE */
+
+/* setup SMC1, CS0 (PSRAM) - 16-bit */
+#define SMC1_SETUP0_VAL 0x00000000 /* SMC_SETUP */
+#define SMC1_PULSE0_VAL 0x07020707 /* SMC_PULSE */
+#define SMC1_CYCLE0_VAL 0x00080008 /* SMC_CYCLE */
+#define SMC1_CTRL0_VAL 0x31001000 /* SMC_MODE */
+
+#define RSTC_RMR_VAL 0xA5000301 /* user reset enable */
+
+#define AT91_WDTC_WDMR (0xFFFFFD44) /* (WDTC) Watchdog Mode Register */
+#define WDTC_WDMR_VAL 0x3fff8fff /* disable watchdog */
+
+_TEXT_BASE:
+ .word TEXT_BASE
+
+.globl lowlevel_init
+.type lowlevel_init,function
+lowlevel_init:
+
+ mov r5, pc /* r5 = POS1 + 4 current */
+POS1:
+ ldr r0, =POS1 /* r0 = POS1 compile */
+ ldr r2, _TEXT_BASE
+ sub r0, r0, r2 /* r0 = POS1-_TEXT_BASE (POS1 relative) */
+ sub r5, r5, r0 /* r0 = TEXT_BASE-1 */
+ sub r5, r5, #4 /* r1 = text base - current */
+
+ /* memory control configuration 1 */
+ ldr r0, =SMRDATA
+ ldr r2, =SMRDATA1
+ ldr r1, _TEXT_BASE
+ sub r0, r0, r1
+ sub r2, r2, r1
+ add r0, r0, r5
+ add r2, r2, r5
+0:
+ /* the address */
+ ldr r1, [r0], #4
+ /* the value */
+ ldr r3, [r0], #4
+ str r3, [r1]
+ cmp r2, r0
+ bne 0b
+
+/*-----------------------------------------------------------------------------
+;PMC Init Step 1.
+;------------------------------------------------------------------------------
+;- Check if the PLL is already initialized
+;----------------------------------------------------------------------------*/
+ ldr r1, =(AT91_BASE_SYS + AT91_PMC_MCKR)
+ ldr r0, [r1]
+ and r0, r0, #3
+ cmp r0, #0
+ bne setup_PLLB
+
+/*;---------------------------------------------------------------------------
+;- Enable the Main Oscillator
+;----------------------------------------------------------------------------*/
+ ldr r1, =(AT91_BASE_SYS + AT91_CKGR_MOR)
+ ldr r2, =(AT91_BASE_SYS + AT91_PMC_SR)
+ ldr r0, =0x0000FF01
+ str r0, [r1] /* Enable main oscillator, OSCOUNT = 0xFF */
+
+ /* Reading the PMC Status to detect when the Main Oscillator is enabled */
+ mov r4, #AT91_PMC_MOSCS
+MOSCS_Loop:
+ ldr r3, [r2]
+ and r3, r4, r3
+ cmp r3, #AT91_PMC_MOSCS
+ bne MOSCS_Loop
+
+/*-----------------------------------------------------------------------------
+;PMC Init Step 2.
+;------------------------------------------------------------------------------
+;- Setup PLLA
+;----------------------------------------------------------------------------*/
+ ldr r1, =(AT91_BASE_SYS + AT91_CKGR_PLLAR)
+ ldr r0, =PLLAR_VAL
+ str r0, [r1]
+
+ /* Reading the PMC Status register to detect when the PLLA is locked */
+ mov r4, #AT91_PMC_LOCKA
+MOSCS_Loop1:
+ ldr r3, [r2]
+ and r3, r4, r3
+ cmp r3, #AT91_PMC_LOCKA
+ bne MOSCS_Loop1
+
+/*-----------------------------------------------------------------------------
+;PMC Init Step 3.
+;------------------------------------------------------------------------------
+;- Switch on the Main Oscillator 18.432 MHz
+;----------------------------------------------------------------------------*/
+ ldr r1, =(AT91_BASE_SYS + AT91_PMC_MCKR)
+
+ /* -Master Clock Controller register PMC_MCKR */
+ ldr r0, =0x100
+ str r0, [r1]
+
+ /* Reading the PMC Status to detect when the Master clock is ready */
+ mov r4, #AT91_PMC_MCKRDY
+MCKRDY_Loop:
+ ldr r3, [r2]
+ and r3, r4, r3
+ cmp r3, #AT91_PMC_MCKRDY
+ bne MCKRDY_Loop
+
+ ldr r0, =0x102
+ str r0, [r1]
+
+ /* Reading the PMC Status to detect when the Master clock is ready */
+ mov r4, #AT91_PMC_MCKRDY
+MCKRDY_Loop1:
+ ldr r3, [r2]
+ and r3, r4, r3
+ cmp r3, #AT91_PMC_MCKRDY
+ bne MCKRDY_Loop1
+
+/*-----------------------------------------------------------------------------
+;PMC Init Step 4.
+;------------------------------------------------------------------------------
+;- Setup PLLB
+;----------------------------------------------------------------------------*/
+setup_PLLB:
+ ldr r2, =(AT91_BASE_SYS + AT91_PMC_SR)
+ mov r4, #AT91_PMC_LOCKB
+ ldr r3, [r2]
+ and r3, r4, r3
+ cmp r3, #AT91_PMC_LOCKB
+ beq PLL_setup_end
+
+ ldr r1, =(AT91_BASE_SYS + AT91_CKGR_PLLBR)
+ ldr r0, =PLLBR_VAL
+ str r0, [r1]
+
+ /* Reading the PMC Status register to detect when the PLLB is locked */
+ mov r4, #AT91_PMC_LOCKB
+MOSCS_Loop2:
+ ldr r3, [r2]
+ and r3, r4, r3
+ cmp r3, #AT91_PMC_LOCKB
+ bne MOSCS_Loop2
+
+PLL_setup_end:
+
+ /* memory control configuration 2 */
+ ldr r0, =AT91_SDRAMC0_TR
+ ldr r1, [r0]
+ cmp r1, #0
+ bne SDRAM_setup_end
+
+ ldr r0, =SMRDATA1
+ ldr r2, =SMRDATA2
+ ldr r1, _TEXT_BASE
+ sub r0, r0, r1
+ sub r2, r2, r1
+ add r0, r0, r5
+ add r2, r2, r5
+
+2:
+ /* the address */
+ ldr r1, [r0], #4
+ /* the value */
+ ldr r3, [r0], #4
+ str r3, [r1]
+ cmp r2, r0
+ bne 2b
+
+SDRAM_setup_end:
+ /* everything is fine now */
+ mov pc, lr
+
+ .ltorg
+
+SMRDATA:
+ .word AT91_WDTC_WDMR
+ .word WDTC_WDMR_VAL
+
+ .word AT91_PIOD_PDR
+ .word PIOD_PDR_VAL1
+ .word AT91_PIOD_PPUDR
+ .word PIOD_PPUDR_VAL
+ .word AT91_PIOD_ASR
+ .word PIOD_PPUDR_VAL
+
+ .word AT91_CCFG_EBI0CSA
+ .word MATRIX_EBI0CSA_VAL
+ .word AT91_CCFG_EBI1CSA
+ .word MATRIX_EBI1CSA_VAL
+
+ /* flash */
+ .word AT91_SMC0_CTRL0
+ .word SMC0_CTRL0_VAL
+
+ .word AT91_SMC0_CYCLE0
+ .word SMC0_CYCLE0_VAL
+
+ .word AT91_SMC0_PULSE0
+ .word SMC0_PULSE0_VAL
+
+ .word AT91_SMC0_SETUP0
+ .word SMC0_SETUP0_VAL
+
+ /* PSRAM */
+ .word AT91_SMC1_CTRL0
+ .word SMC1_CTRL0_VAL
+
+ .word AT91_SMC1_CYCLE0
+ .word SMC1_CYCLE0_VAL
+
+ .word AT91_SMC1_PULSE0
+ .word SMC1_PULSE0_VAL
+
+ .word AT91_SMC1_SETUP0
+ .word SMC1_SETUP0_VAL
+
+SMRDATA1:
+ .word AT91_SDRAMC0_MR
+ .word SDRC_MR_VAL1
+ .word AT91_SDRAMC0_TR
+ .word SDRC_TR_VAL1
+ .word AT91_SDRAMC0_CR
+ .word SDRC_CR_VAL
+ .word AT91_SDRAMC0_MDR
+ .word SDRC_MDR_VAL
+ .word AT91_SDRAMC0_MR
+ .word SDRC_MR_VAL2
+ .word SDRAM
+ .word SDRAM_VAL1
+ .word AT91_SDRAMC0_MR
+ .word SDRC_MR_VAL3
+ .word SDRAM
+ .word SDRAM_VAL2
+ .word SDRAM
+ .word SDRAM_VAL3
+ .word SDRAM
+ .word SDRAM_VAL4
+ .word SDRAM
+ .word SDRAM_VAL5
+ .word SDRAM
+ .word SDRAM_VAL6
+ .word SDRAM
+ .word SDRAM_VAL7
+ .word SDRAM
+ .word SDRAM_VAL8
+ .word SDRAM
+ .word SDRAM_VAL9
+ .word AT91_SDRAMC0_MR
+ .word SDRC_MR_VAL4
+ .word SDRAM
+ .word SDRAM_VAL10
+ .word AT91_SDRAMC0_MR
+ .word SDRC_MR_VAL5
+ .word SDRAM
+ .word SDRAM_VAL11
+ .word AT91_SDRAMC0_TR
+ .word SDRC_TR_VAL2
+ .word SDRAM
+ .word SDRAM_VAL12
+ /* User reset enable*/
+ .word AT91_RSTC_RMR
+ .word RSTC_RMR_VAL
+ /* MATRIX_MCFG - REMAP all masters */
+/* .word AT91_MATRIX_MRCR
+ .word 0x1FF
+*/
+
+SMRDATA2:
+ .word 0
+
+#endif /* CONFIG_SKIP_LOWLEVEL_INIT */
diff --git a/board/ronetix/pm9263/pm9263_nand.c b/board/ronetix/pm9263/pm9263_nand.c
new file mode 100644
index 0000000..03f5ac2
--- /dev/null
+++ b/board/ronetix/pm9263/pm9263_nand.c
@@ -0,0 +1,79 @@
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian.pop at leadtechdesign.com>
+ * Lead Tech Design <www.leadtechdesign.com>
+ * Ilko Iliev <www.ronetix.at>
+ *
+ * (C) Copyright 2006 ATMEL Rousset, Lacressonniere Nicolas
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/at91sam9263.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/at91_pio.h>
+
+#include <nand.h>
+
+/*
+ * hardware specific access to control-lines
+ */
+#define MASK_ALE (1 << 21) /* our ALE is AD21 */
+#define MASK_CLE (1 << 22) /* our CLE is AD22 */
+
+static void pm9263_nand_hwcontrol(struct mtd_info *mtd,
+ int cmd, unsigned int ctrl)
+{
+ struct nand_chip *this = mtd->priv;
+
+ if (ctrl & NAND_CTRL_CHANGE) {
+ ulong IO_ADDR_W = (ulong) this->IO_ADDR_W;
+ IO_ADDR_W &= ~(MASK_ALE | MASK_CLE);
+
+ if (ctrl & NAND_CLE)
+ IO_ADDR_W |= MASK_CLE;
+ if (ctrl & NAND_ALE)
+ IO_ADDR_W |= MASK_ALE;
+
+ at91_set_gpio_value(AT91_PIN_PD15, !(ctrl & NAND_NCE));
+ this->IO_ADDR_W = (void *) IO_ADDR_W;
+ }
+
+ if (cmd != NAND_CMD_NONE)
+ writeb(cmd, this->IO_ADDR_W);
+}
+
+static int pm9263_nand_ready(struct mtd_info *mtd)
+{
+ return at91_get_gpio_value(AT91_PIN_PB30);
+}
+
+int board_nand_init(struct nand_chip *nand)
+{
+ nand->ecc.mode = NAND_ECC_SOFT;
+#ifdef CFG_NAND_DBW_16
+ nand->options = NAND_BUSWIDTH_16;
+#endif
+ nand->cmd_ctrl = pm9263_nand_hwcontrol;
+ nand->dev_ready = pm9263_nand_ready;
+ nand->chip_delay = 20;
+
+ return 0;
+}
diff --git a/board/ronetix/pm9263/pm9263_partition.c b/board/ronetix/pm9263/pm9263_partition.c
new file mode 100644
index 0000000..95ac398
--- /dev/null
+++ b/board/ronetix/pm9263/pm9263_partition.c
@@ -0,0 +1,47 @@
+/*
+ * (C) Copyright 2008
+ * Ulf Samuelsson <ulf at atmel.com>
+ * Ilko Iliev <www.ronetix.at>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+#include <common.h>
+#include <config.h>
+#include <asm/hardware.h>
+#include <dataflash.h>
+
+AT91S_DATAFLASH_INFO dataflash_info[CONFIG_SYS_MAX_DATAFLASH_BANKS];
+
+struct dataflash_addr cs[CONFIG_SYS_MAX_DATAFLASH_BANKS] = {
+ {CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0, 0}, /* Logical adress, CS */
+};
+
+/*define the area offsets*/
+#ifdef CONFIG_SYS_USE_DATAFLASH
+dataflash_protect_t area_list[NB_DATAFLASH_AREA] = {
+ {0x00000000, 0x000041FF, FLAG_PROTECT_SET, 0, "Bootstrap"},
+ {0x00004200, 0x000083FF, FLAG_PROTECT_CLEAR, 0, "Environment"},
+ {0x00008400, 0x00041FFF, FLAG_PROTECT_SET, 0, "U-Boot"},
+ {0x00042000, 0x00251FFF, FLAG_PROTECT_CLEAR, 0, "Kernel"},
+ {0x00252000, 0xFFFFFFFF, FLAG_PROTECT_CLEAR, 0, "FS"},
+};
+#else
+dataflash_protect_t area_list[NB_DATAFLASH_AREA] = {
+ {0x00000000, 0xFFFFFFFF, FLAG_PROTECT_CLEAR, 0, ""},
+};
+
+#endif
diff --git a/include/configs/pm9263.h b/include/configs/pm9263.h
new file mode 100644
index 0000000..6b1b92e
--- /dev/null
+++ b/include/configs/pm9263.h
@@ -0,0 +1,279 @@
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian.pop at leadtechdesign.com>
+ * Lead Tech Design <www.leadtechdesign.com>
+ * Ilko Iliev <www.ronetix.at>
+ *
+ * Configuation settings for the RONETIX PM9263 board.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/* ARM asynchronous clock */
+#define AT91_CPU_NAME "AT91SAM9263"
+
+#define CONFIG_DISPLAY_BOARDINFO
+
+#define PM9263_CRYSTAL 18432000
+#define MASTER_PLL_DIV 15
+#define MASTER_PLL_MUL 162
+#define MAIN_PLL_DIV 2
+
+#define AT91_MAIN_CLOCK (PM9263_CRYSTAL / MASTER_PLL_DIV * MASTER_PLL_MUL)
+#define AT91_MASTER_CLOCK (AT91_MAIN_CLOCK / MAIN_PLL_DIV)
+#define CONFIG_SYS_HZ 1000000
+
+#define AT91_SLOW_CLOCK 32768 /* slow clock */
+
+#define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */
+#define CONFIG_AT91SAM9263 1 /* It's an Atmel AT91SAM9263 SoC*/
+#define CONFIG_PM9263 1 /* on a Ronetix PM9263 Board */
+#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
+
+#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS 1
+#define CONFIG_INITRD_TAG 1
+
+#undef CONFIG_SKIP_LOWLEVEL_INIT
+#undef CONFIG_SKIP_RELOCATE_UBOOT
+#define CONFIG_USER_LOWLEVEL_INIT 1
+
+/*
+ * Hardware drivers
+ */
+#define CONFIG_ATMEL_USART 1
+#undef CONFIG_USART0
+#undef CONFIG_USART1
+#undef CONFIG_USART2
+#define CONFIG_USART3 1 /* USART 3 is DBGU */
+
+/* LCD */
+#define CONFIG_LCD 1
+#define LCD_BPP LCD_COLOR8
+#define CONFIG_LCD_LOGO 1
+#define CONFIG_LCD_LOGO_TEXT1 "(C) 2008 Ronetix GmbH"
+#define CONFIG_LCD_LOGO_TEXT2 "support at ronetix.at"
+#undef LCD_TEST_PATTERN
+#define CONFIG_LCD_INFO 1
+#define CONFIG_LCD_INFO_BELOW_LOGO 1
+#define CONFIG_SYS_WHITE_ON_BLACK 1
+#define CONFIG_ATMEL_LCD 1
+#define CONFIG_ATMEL_LCD_BGR555 1
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1
+
+#define LCD_IN_PSRAM 1
+
+#define CONFIG_BOOTDELAY 3
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE 1
+#define CONFIG_BOOTP_BOOTPATH 1
+#define CONFIG_BOOTP_GATEWAY 1
+#define CONFIG_BOOTP_HOSTNAME 1
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+#undef CONFIG_CMD_BDI
+#undef CONFIG_CMD_IMI
+#undef CONFIG_CMD_AUTOSCRIPT
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_IMLS
+
+#define CONFIG_CMD_PING 1
+#define CONFIG_CMD_DHCP 1
+#define CONFIG_CMD_NAND 1
+#define CONFIG_CMD_USB 1
+
+/* SDRAM */
+#define CONFIG_NR_DRAM_BANKS 1
+#define PHYS_SDRAM 0x20000000
+#define PHYS_SDRAM_SIZE 0x04000000 /* 64 megs */
+
+/* DataFlash */
+#define CONFIG_HAS_DATAFLASH 1
+#define CONFIG_SYS_SPI_WRITE_TOUT (5*CONFIG_SYS_HZ)
+#define CONFIG_SYS_MAX_DATAFLASH_BANKS 1
+#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */
+#define AT91_SPI_CLK 15000000
+#define DATAFLASH_TCSS (0x1a << 16)
+#define DATAFLASH_TCHS (0x1 << 24)
+
+/* NOR flash, if populated */
+#define CONFIG_SYS_FLASH_CFI 1
+#define CONFIG_FLASH_CFI_DRIVER 1
+#define PHYS_FLASH_1 0x10000000
+#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
+#define CONFIG_SYS_MAX_FLASH_SECT 256
+#define CONFIG_SYS_MAX_FLASH_BANKS 1
+
+/* NAND flash */
+#define NAND_MAX_CHIPS 1
+#define CONFIG_SYS_MAX_NAND_DEVICE 1
+#define CONFIG_SYS_NAND_BASE 0x40000000
+#define CONFIG_SYS_NAND_DBW_8 1
+
+#define CONFIG_CMD_JFFS2 1
+#define CONFIG_JFFS2_CMDLINE 1
+#define CONFIG_JFFS2_NAND 1
+#define CONFIG_JFFS2_DEV "nand0" /* NAND device jffs2 lives on */
+#define CONFIG_JFFS2_PART_OFFSET 0 /* start of jffs2 partition */
+#define CONFIG_JFFS2_PART_SIZE (256*1024*1024) /* size of jffs2 partition */
+
+/* PSRAM */
+#define PHYS_PSRAM 0x70000000
+#define PHYS_PSRAM_SIZE 0x00400000 /* 4MB */
+
+/* Ethernet */
+#define CONFIG_MACB 1
+#define CONFIG_RMII 1
+#define CONFIG_NET_MULTI 1
+#define CONFIG_NET_RETRY_COUNT 20
+#define CONFIG_RESET_PHY_R 1
+
+/* USB */
+#define CONFIG_USB_OHCI_NEW 1
+#define LITTLEENDIAN 1
+#define CONFIG_DOS_PARTITION 1
+#define CONFIG_SYS_USB_OHCI_CPU_INIT 1
+#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00a00000 /* AT91SAM9263_UHP_BASE */
+#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9263"
+#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
+#define CONFIG_USB_STORAGE 1
+
+#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
+
+#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM
+#define CONFIG_SYS_MEMTEST_END 0x23e00000
+
+#define CONFIG_SYS_USE_FLASH 1
+#undef CONFIG_SYS_USE_DATAFLASH
+#undef CONFIG_SYS_USE_NANDFLASH
+
+#ifdef CONFIG_SYS_USE_DATAFLASH
+
+/* bootstrap + u-boot + env + linux in dataflash on CS0 */
+#define CONFIG_ENV_IS_IN_DATAFLASH 1
+#define CFG_MONITOR_BASE (CFG_DATAFLASH_LOGIC_ADDR_CS0 + 0x8400)
+#define CONFIG_ENV_OFFSET 0x4200
+#define CONFIG_ENV_ADDR (CFG_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET)
+#define CONFIG_ENV_SIZE 0x4200
+#define CONFIG_BOOTCOMMAND "cp.b 0xC0042000 0x22000000 0x210000; bootm"
+#define CONFIG_BOOTARGS "console=ttyS0,115200 " \
+ "root=/dev/mtdblock0 " \
+ "mtdparts=at91_nand:-(root) "\
+ "rw rootfstype=jffs2"
+
+#elif defined(CONFIG_SYS_USE_NANDFLASH) /* CFG_USE_NANDFLASH */
+
+/* bootstrap + u-boot + env + linux in nandflash */
+#define CONFIG_ENV_IS_IN_NAND 1
+#define CONFIG_ENV_OFFSET 0x60000
+#define CONFIG_ENV_OFFSET_REDUND 0x80000
+#define CONFIG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */
+#define CONFIG_BOOTCOMMAND "nand read 0x22000000 0xA0000 0x200000; bootm"
+#define CONFIG_BOOTARGS "console=ttyS0,115200 " \
+ "root=/dev/mtdblock5 " \
+ "mtdparts=at91_nand:128k(bootstrap)ro,256k(uboot)ro,128k(env1)ro,128k(env2)ro,2M(linux),-(root) " \
+ "rw rootfstype=jffs2"
+
+#elif defined(CONFIG_SYS_USE_FLASH) /* CFG_USE_FLASH */
+
+#define CONFIG_ENV_IS_IN_FLASH 1
+#define CONFIG_ENV_OFFSET 0x40000
+#define CONFIG_ENV_SECT_SIZE 0x10000
+#define CONFIG_ENV_SIZE 0x10000
+#define CONFIG_ENV_OVERWRITE 1
+
+/* JFFS Partition offset set */
+#define CONFIG_SYS_JFFS2_FIRST_BANK 0
+#define CONFIG_SYS_JFFS2_NUM_BANKS 1
+
+/* 512k reserved for u-boot */
+#define CONFIG_SYS_JFFS2_FIRST_SECTOR 11
+
+#define CONFIG_BOOTCOMMAND "run flashboot"
+#define CONFIG_ROOTPATH /ronetix/rootfs
+#define CONFIG_AUTOBOOT_PROMPT "autoboot in %d seconds\n"
+
+#define CONFIG_CON_ROT "fbcon=rotate:3 "
+#define CONFIG_BOOTARGS "root=/dev/mtdblock4 rootfstype=jffs2 " CONFIG_CON_ROT
+
+#define MTDIDS_DEFAULT "nor0=physmap-flash.0,nand0=nand"
+#define MTDPARTS_DEFAULT \
+ "mtdparts=physmap-flash.0:" \
+ "256k(u-boot)ro," \
+ "64k(u-boot-env)ro," \
+ "1408k(kernel)," \
+ "-(rootfs);" \
+ "nand:-(nand)"
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "mtdids=" MTDIDS_DEFAULT "\0" \
+ "mtdparts=" MTDPARTS_DEFAULT "\0" \
+ "partition=nand0,0\0" \
+ "ramargs=setenv bootargs $(bootargs) $(mtdparts)\0" \
+ "nfsargs=setenv bootargs root=/dev/nfs rw " \
+ CONFIG_CON_ROT \
+ "nfsroot=$(serverip):$(rootpath) $(mtdparts)\0" \
+ "addip=setenv bootargs $(bootargs) " \
+ "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)"\
+ ":$(hostname):eth0:off\0" \
+ "ramboot=tftpboot 0x22000000 vmImage;" \
+ "run ramargs;run addip;bootm 22000000\0" \
+ "nfsboot=tftpboot 0x22000000 vmImage;" \
+ "run nfsargs;run addip;bootm 22000000\0" \
+ "flashboot=run ramargs;run addip;bootm 0x10050000\0" \
+ ""
+
+#else
+#error "Undefined memory device"
+#endif
+
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_SYS_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 }
+
+#define CONFIG_SYS_PROMPT "u-boot-pm9263> "
+#define CONFIG_SYS_CBSIZE 256
+#define CONFIG_SYS_MAXARGS 16
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_LONGHELP 1
+#define CONFIG_CMDLINE_EDITING 1
+
+#define ROUND(A, B) (((A) + (B)) & ~((B) - 1))
+/*
+ * Size of malloc() pool
+ */
+#define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000)
+#define CONFIG_SYS_GBL_DATA_SIZE 128 /* 128 bytes for initial data */
+
+#define CONFIG_STACKSIZE (32*1024) /* regular stack */
+
+#ifdef CONFIG_USE_IRQ
+#error CONFIG_USE_IRQ not supported
+#endif
+
+#endif
diff --git a/tools/Makefile b/tools/Makefile
index 9e9ee15..fbc64ba 100644
--- a/tools/Makefile
+++ b/tools/Makefile
@@ -47,6 +47,9 @@ endif
ifeq ($(VENDOR),atmel)
LOGO_BMP= logos/atmel.bmp
endif
+ifeq ($(VENDOR),ronetix)
+LOGO_BMP= logos/ronetix.bmp
+endif
#-------------------------------------------------------------------------
diff --git a/tools/logos/ronetix.bmp b/tools/logos/ronetix.bmp
new file mode 100644
index 0000000000000000000000000000000000000000..f956813915c7822ba11a3ab81ad9f48fa2849a5c
GIT binary patch
literal 5638
zc%03cKU~{J6vq!FPL^XEQ4<1A027nM#06YR5|^g at OKA-xvFpaEo7M?2RUxKo5Z8f`
zk&)3OBO at bYMn*=D9z8NL_UZmevTPuqe43=c5AXA&)4g|Jo$j7w=AYmmM1|WCii6(=
zi-NTwAG^>E=VQ$NLCl!oy3YrH8uDqD^&-u(Udy7W*Rp67MXAM6G#*FscoM~vNt8^c
zP%@Q5DQdGQH9L!Dsio0uI*roQvXJKlrL$R-rB;A^Cty{SEfgSU6&1i23M-Hsj#pOD
z3RpZ at 1;36~*4JT-Dq07hqJ9&`0l&G4Ho<1oRq)#|4)|^G*(%xwzrDSKws&@5j2hYj
zU!Z;$?d<NNU21!ftA=*>_Rt>K`eqIC)Zn;+_9_*Kub~R~N at X8a_V>{~wF8K&qy2*e
zbU^J89ULB_L$FGv4*m!o9a;7cuGP`eJMf2f^bY)?<&TfiG1$@3Dfkm;2Y+&cPN-F(
z?G#n3RXDbM4OMGk)l*ahU#r)_pP{<t>y`&QJw>O~&d}M}8G1<m-%=+&H^IdU$jQ%*
zaG`>V<efpIqzjeIa%O(6QS(bh==6GeZf-j3idvp#m#6c at n4f8gn3*fnE{j$(4Jy+f
zGYdNJIbCuCJj-w`l}J!k<?#l*)vy|1x`LBSAuM@?)lrkA+a#&&h7&a-uA)(*E1rn9
zJ_EX#p?2%|Ivf^d+OFtRh;;}XPO2p4YVTjO_!<HAFJy&FioXhCwONX^OqSsSj at eOp
zMd26a38DuSPlPmL at rA8q_@>3 at w|XdnHF8s8Q8t1ZmlZxr!X%VWm0>~zUbifg$_cU{
zwZMZbF%MrUWZ#Fwr-*sL3YPA-<kQJU4~xWUmZ==&<12WYu0M8vQ+%NHu#G2;5;Dp7
z6h|!C)kZ$EmqsaCz{Tg++zMq|^T8nn!~wbl*LwJjV0Do=eDZBRdp$NDhC3z`Y}^Mq
zp`SD>F%CEKjk0c`q|f2QVZ(H3bMqWNl2LqCbjLMVf<-YsIG7`Dz7cw|A?Q^_w(vL~
z&N<7IJ`NAxB1<YwOiM1lZsO57eB?eGR7#OzC&!buB5CF;_lnu$4`1+QoH4F8^X2Ja
zaLf9*{2_cMUvmD*PQHqzK3xR4_>AlJ?BN;m-h5?^WtGz;id#S5i}}bJ=j!0wUXD4{
z#^Ez=ICy+By$_#xgWWyscG8dC`=gU9q^(}eM_%|{WlZUqw5y4W&+Hd?SP^*d!<XU(
ztQ+q6I&P>hTv#n#!bcWdczkI!@{O7?vG#nLvmGwyTf{!L_+Ak&pFN`gQa&;#BC!84
zA;10M;lqh>F?;@N^Urd*=d0%Bd>yw)QRP!b at 9Bg2@|`>a2lHg>`^eC*V!!}Pq517}
z0qem)bsaS><C7CcnD346h?~zEUD5K-neqj*iBE0dTN3L}>MoJLzl{tI+z~U#H=p-~
z3Co~8aVcMFhL<j02sz)DRcGKG<B^L`4`3JH9OlDIeP#0ItH{vMP-N^c7W9JlgnI0V
zcUIKmCG}aJy2jp3;c^2X>@~RsAEA6Qy_Y3x*)l#eDe&YGgRFdM;Q`<`TP!GRT~)dg
zwr*>pds at 8TZaxsYA9B6l)L4M6FH!6TA6e6|qCL$tYMCxF+>^;X*6B-w@)@`64}wWT
zUJf$6p~1+HJn1}U#mkn?0i}6SJY3&^?7WZi`Pt&d%f!n^itt#lS7M7|874d~Q$D><
zym6HUi2L)-z>om^nP(l9#QT>kiUnWB{#<B~G|A?VojBj$4j;+jrX}r85F<u6Rsu#z
z6L@~M$XA91;K0yJzHX!Pd3<K99V=d8DO4hh5<ipsoNC_(pSBYJJu at da1-b+u1Mtll
zTo7+ux$`;C at yo!V0KEH#HI=*C&fz1*!(J`asLt*L)U##&Bf#IKy8`{ep!$HHjHp-6
zmtV<{9F#GE7hbiKJc$Uv$k%UKQ^|kJ&DZbnS<~Aj+FE8>bNz52M!CGPA*RzTU8L7=
zTWL`$q-fcdWtMLd0DQ!op2l6*^-jgj_YpPD%7Yv?-K}r$MeIHDgtz5laiN%~FCU-J
zs*_MxraaAW?%JF9j%Z7?iSjJI!c=+jWAj;clGT+)*_+tmGvnT$YKmHF3jEJiRQ<UY
z&0-S|-nE;Io`zZnRpgWWXC|9(*~~Ywi;w7C?uvTl>JMhi$WNq4bdL;-xtjDBj(*oa
QD;*(Q_XdWChX=;~1zg+&lK=n!
literal 0
Hc$@<O00001
--
1.5.2.2
More information about the U-Boot
mailing list