[U-Boot] Hangs up after transferring control to kernel

[Kumar Gala]

On Nov 13, 2008, at 1:36 PM, eliad lubovsky wrote:

>
>
> On Wed, Nov 12, 2008 at 8:14 PM, Kumar Gala  
> <galak at kernel.crashing.org> wrote:
>
> On Nov 12, 2008, at 5:48 PM, eliad lubovsky wrote:
>
> I am trying to boot kernel 2.6.23 on an MPC8572DS board.
> It hangs on a bootm command after decompressing the kernel and the  
> rootfs. I
> added some printings to u-boot where I can see that it transfers  
> control to
> the kernel (can be seen in the attached file).
>
> What could be the problem?
>
> Where did you get a kernel for 8572 that is based on 2.6.23?
>
>  The kernel is from the ltib environment installed from Freescale BSP.

you should than use the u-boot from ltib.  There ltib kernel is NOT  
expected to work w/the open source u-boot.

- k