[U-Boot] MAKEALL ml507_flash return "Not enough room for programheaders" error

[Ricardo]

Hello Benny

  I have just checkout the build of the ml507_flash and works ok for me

ricardo at aragorn:~/curro/qtec/u-boot$ ./MAKEALL ml507_flash
Configuring for ml507 board...
   text	   data	    bss	    dec	    hex	filename
 202132	  10476	  30032	 242640	  3b3d0	./u-boot


  I remember that when I was using another toolchain the final link
failed (but showing different error). Try with another toochain, I am
using one produced by OpenEmbedded, but you will get the same results
with the ELDK


  Best regards



On Mon, Nov 3, 2008 at 07:59, Benny Chen <benny.chen at groundprobe.com> wrote:
> Hi there,
>
> I am trying to build a U-Boot image for the ML507 board running from
> FLASH and got the "Not enough room for program headers" error.
>
>
>
> The main difference for my setup is the toolchain.  I am using the
> powerpc-eabi-ld linker from Xilinx's EDK tool chain to build the
> ml507_flash design for U-Boot.
>
>
>
> I have seen a patch on the linker script for the mpc8555cds board and
> tried adding the patch to the Xilinx/ppc440-generic/u-boot-rom.lds but
> got the "relocation truncated to fit R_PPC_REL24" error.
>
> Before going further with debugging this problem, I would like to check
> if this problem is due to the powerpc-eabi tool chain from Xilinx?
>
>
>
> Thanks for your help.
>
>
>
> Regards,
>
> Benny
>
>
>
> $ ./MAKEALL ml507_flash
>
> Configuring for ml507 board...
>
> powerpc-eabi-ld: u-boot: Not enough room for program headers (allocated
> 2, need 5)
>
> powerpc-eabi-ld: final link failed: Bad value
>
> make: *** [u-boot] Error 1
>
> size: './u-boot': No such file
>
>
>
>
>
>
>
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
>
>



-- 
Ricardo Ribalda
http://www.eps.uam.es/~rribalda/