[U-Boot] [PATCH] lib_ppc: Move trap_init to occur earlier

[Jon Loeliger]

On Mon, 2008-11-03 at 10:18 -0600, Jon Loeliger wrote:
> On Fri, 2008-10-31 at 17:14 -0500, Becky Bruce wrote:
> > Doing trap_init immediately once we're running from RAM
> > means we're no longer dependent on the physical location of
> > the flash on non-BookE platforms. Before trap_init, those
> > platforms switch to real mode and go to 0xfff00100 on exception.
> > After the switch, they go to 0x00000100  This makes it easier to
> > move the flash location.
> > 
> > Signed-off-by: Becky Bruce <becky.bruce at freescale.com>
> > ---
> >  lib_ppc/board.c |   10 +++++-----
> >  1 files changed, 5 insertions(+), 5 deletions(-)
> 
> Wolfgang,
> 
> Will you pick this one up?  Or would you like me
> to run it through u-boot-mpc86xx with the others?
> 
> Thanks,
> jdl


Wolfgang,

I spoke to Becky about this patch and she says it is
required for the rest of her 86xx patches to work.
So I will pick this one up and run it through the u-boot-mpc86xx
git tree.

Thanks,
jdl