[U-Boot] [PATCH] mpc8641: fix address-cells default in old .dts detection

[Becky Bruce]

address-cells defaults to 2, not 1; so in the unlikely
event that it isn't specified, this patch is required
for correct operation.

Signed-off-by: Becky Bruce <becky.bruce at freescale.com>
---
 board/freescale/mpc8641hpcn/mpc8641hpcn.c |    6 +++---
 1 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/board/freescale/mpc8641hpcn/mpc8641hpcn.c b/board/freescale/mpc8641hpcn/mpc8641hpcn.c
index 1f9f2a3..110bae1 100644
--- a/board/freescale/mpc8641hpcn/mpc8641hpcn.c
+++ b/board/freescale/mpc8641hpcn/mpc8641hpcn.c
@@ -278,10 +278,10 @@ ft_board_setup(void *blob, bd_t *bd)
 
 	if (tmp) {
 		u64 addr;
-		if (addrcells && (*addrcells == 2))
-			addr = *tmp;
-		else
+		if (addrcells && (*addrcells == 1))
 			addr = *(u32 *)tmp;
+		else
+			addr = *tmp;
 
 		if (addr != CONFIG_SYS_CCSRBAR_PHYS)
 			printf("WARNING: The CCSRBAR address in your .dts "
-- 
1.5.6.5