[U-Boot] [PATCH 8/9] mpc8641: Change 32-bit memory map

[Becky Bruce]

On Nov 6, 2008, at 2:04 PM, Jon Loeliger wrote:

> On Wed, 2008-11-05 at 14:55 -0600, Becky Bruce wrote:
>> The memory map on the 8641hpcn is modified to look more like
>> the 85xx boards; this is a step towards a more standardized
>> layout going forward. As part of this change, we now relocate
>> the flash.
>>
>> The regions for some of the mappings were far larger than they
>> needed to be.  I have reduced the mappings to match the
>> actual sizes supported by the hardware.
>>
>> In addition I have removed the comments at the head
>> of the BAT blocks in the config file, rather than updating
>> them.  These get horribly out of date, and it's a simple
>> matter to look at the defines to see what they are set to
>> since everything is right here in the same file.
>>
>> Signed-off-by: Becky Bruce <becky.bruce at freescale.com>
>> ---
>> board/freescale/mpc8641hpcn/config.mk |    2 +-
>> board/freescale/mpc8641hpcn/law.c     |   23 ++++++----
>> cpu/mpc86xx/start.S                   |    2 +-
>> include/configs/MPC8641HPCN.h         |   76 ++++++++++++++++ 
>> +----------------
>> 4 files changed, 54 insertions(+), 49 deletions(-)
>
> Does this affect any flash addresses mentioned in
> the README.mpc86xx too?

I resubmitted the last 2 patches, now with the appropriate  
documentation updates.  That is the only change.

-Becky