[U-Boot] Uboot Ethernet driver for Broadcom BCM5481 PHY

[Ben Warren]

Matheos Worku wrote:
> Ben Warren wrote:
>
>> Hi Matheos,
>>
>> Matheos Worku wrote:
>>  
>>
>>> Hi,
>>>
>>> I was wondering if  a uboot ethernet PHY driver for Broadcom BCM5481 
>>> PHY exists?
>>>  
>>>   
>> What are you connecting it to?
>>  
>>
> Ben,
>
> The CPU I would be using is Freescale MPC85XX family (with built in 
> GIANFAR  MAC). RJ45 on the networking  side.
> Regards
> Matheos
There's in-tree support for the BCM5461 and BCM5464 in 
drivers/net/tsec.c (which is the gianfar driver), and support for the 
BMC5481 on the UEC driver (drivers/qe/uec.c).  Between the two you 
should be able to get this working pretty easily.  There's slow ongoing 
work on unifying the PHY drivers, but it's not there yet.

regards,
Ben