[U-Boot] [PATCH-OMAP3 v2] OMAP3: Plain numbers don't need parens
dirk.behme at googlemail.com
dirk.behme at googlemail.com
Tue Nov 4 20:33:03 CET 2008
Subject: [PATCH-OMAP3 v2] OMAP3: Plain numbers don't need parens
From: Dirk Behme <dirk.behme at gmail.com>
Use a consistent style. Plain numbers don't need parens. Proposed by Wolfgang Denk.
Signed-off-by: Dirk Behme <dirk.behme at gmail.com>
---
Changes in v2:
- Don't remove parens for OMAP34XX_GPMC_BASE
include/asm-arm/arch-omap3/cpu.h | 64 +++++++++++++++---------------
include/asm-arm/arch-omap3/i2c.h | 20 ++++-----
include/asm-arm/arch-omap3/mmc.h | 20 ++++-----
include/asm-arm/arch-omap3/mmc_host_def.h | 2
include/asm-arm/arch-omap3/omap3.h | 22 +++++-----
5 files changed, 64 insertions(+), 64 deletions(-)
Index: u-boot-arm/include/asm-arm/arch-omap3/cpu.h
===================================================================
--- u-boot-arm.orig/include/asm-arm/arch-omap3/cpu.h
+++ u-boot-arm/include/asm-arm/arch-omap3/cpu.h
@@ -48,43 +48,43 @@
/* GPMC CS3/cs4/cs6 not avaliable */
#define GPMC_BASE (OMAP34XX_GPMC_BASE)
-#define GPMC_SYSCONFIG (0x10)
-#define GPMC_IRQSTATUS (0x18)
-#define GPMC_IRQENABLE (0x1C)
-#define GPMC_TIMEOUT_CONTROL (0x40)
-#define GPMC_CONFIG (0x50)
-#define GPMC_STATUS (0x54)
-#define GPMC_CONFIG_CS0 (0x60)
+#define GPMC_SYSCONFIG 0x10
+#define GPMC_IRQSTATUS 0x18
+#define GPMC_IRQENABLE 0x1C
+#define GPMC_TIMEOUT_CONTROL 0x40
+#define GPMC_CONFIG 0x50
+#define GPMC_STATUS 0x54
+#define GPMC_CONFIG_CS0 0x60
#define GPMC_CONFIG_REG (GPMC_BASE + GPMC_CONFIG)
#define GPMC_CONFIG_CS0_BASE (GPMC_BASE + GPMC_CONFIG_CS0)
-#define GPMC_CONFIG_WP (0x10)
+#define GPMC_CONFIG_WP 0x10
-#define GPMC_CONFIG_WIDTH (0x30)
+#define GPMC_CONFIG_WIDTH 0x30
-#define GPMC_CONFIG1 (0x00)
-#define GPMC_CONFIG2 (0x04)
-#define GPMC_CONFIG3 (0x08)
-#define GPMC_CONFIG4 (0x0C)
-#define GPMC_CONFIG5 (0x10)
-#define GPMC_CONFIG6 (0x14)
-#define GPMC_CONFIG7 (0x18)
-#define GPMC_NAND_CMD (0x1C)
-#define GPMC_NAND_ADR (0x20)
-#define GPMC_NAND_DAT (0x24)
-
-#define GPMC_ECC_CONFIG (0x1F4)
-#define GPMC_ECC_CONTROL (0x1F8)
-#define GPMC_ECC_SIZE_CONFIG (0x1FC)
-#define GPMC_ECC1_RESULT (0x200)
-#define GPMC_ECC2_RESULT (0x204)
-#define GPMC_ECC3_RESULT (0x208)
-#define GPMC_ECC4_RESULT (0x20C)
-#define GPMC_ECC5_RESULT (0x210)
-#define GPMC_ECC6_RESULT (0x214)
-#define GPMC_ECC7_RESULT (0x218)
-#define GPMC_ECC8_RESULT (0x21C)
-#define GPMC_ECC9_RESULT (0x220)
+#define GPMC_CONFIG1 0x00
+#define GPMC_CONFIG2 0x04
+#define GPMC_CONFIG3 0x08
+#define GPMC_CONFIG4 0x0C
+#define GPMC_CONFIG5 0x10
+#define GPMC_CONFIG6 0x14
+#define GPMC_CONFIG7 0x18
+#define GPMC_NAND_CMD 0x1C
+#define GPMC_NAND_ADR 0x20
+#define GPMC_NAND_DAT 0x24
+
+#define GPMC_ECC_CONFIG 0x1F4
+#define GPMC_ECC_CONTROL 0x1F8
+#define GPMC_ECC_SIZE_CONFIG 0x1FC
+#define GPMC_ECC1_RESULT 0x200
+#define GPMC_ECC2_RESULT 0x204
+#define GPMC_ECC3_RESULT 0x208
+#define GPMC_ECC4_RESULT 0x20C
+#define GPMC_ECC5_RESULT 0x210
+#define GPMC_ECC6_RESULT 0x214
+#define GPMC_ECC7_RESULT 0x218
+#define GPMC_ECC8_RESULT 0x21C
+#define GPMC_ECC9_RESULT 0x220
/* GPMC Mapping */
#define FLASH_BASE 0x10000000 /* NOR flash, */
Index: u-boot-arm/include/asm-arm/arch-omap3/i2c.h
===================================================================
--- u-boot-arm.orig/include/asm-arm/arch-omap3/i2c.h
+++ u-boot-arm/include/asm-arm/arch-omap3/i2c.h
@@ -103,14 +103,14 @@
#define I2C_SYSTEST_SDA_I (1 << 1) /* SDA line sense input value */
#define I2C_SYSTEST_SDA_O (1 << 0) /* SDA line drive output value */
-#define I2C_SCLL_SCLL (0)
-#define I2C_SCLL_SCLL_M (0xFF)
-#define I2C_SCLL_HSSCLL (8)
-#define I2C_SCLH_HSSCLL_M (0xFF)
-#define I2C_SCLH_SCLH (0)
-#define I2C_SCLH_SCLH_M (0xFF)
-#define I2C_SCLH_HSSCLH (8)
-#define I2C_SCLH_HSSCLH_M (0xFF)
+#define I2C_SCLL_SCLL 0
+#define I2C_SCLL_SCLL_M 0xFF
+#define I2C_SCLL_HSSCLL 8
+#define I2C_SCLH_HSSCLL_M 0xFF
+#define I2C_SCLH_SCLH 0
+#define I2C_SCLH_SCLH_M 0xFF
+#define I2C_SCLH_HSSCLH 8
+#define I2C_SCLH_HSSCLH_M 0xFF
#define OMAP_I2C_STANDARD 100
#define OMAP_I2C_FAST_MODE 400
@@ -122,7 +122,7 @@
#define SYSTEM_CLOCK_96 96000
#define I2C_IP_CLK SYSTEM_CLOCK_96
-#define I2C_PSC_MAX (0x0f)
-#define I2C_PSC_MIN (0x00)
+#define I2C_PSC_MAX 0x0f
+#define I2C_PSC_MIN 0x00
#endif /* _I2C_H_ */
Index: u-boot-arm/include/asm-arm/arch-omap3/mmc.h
===================================================================
--- u-boot-arm.orig/include/asm-arm/arch-omap3/mmc.h
+++ u-boot-arm/include/asm-arm/arch-omap3/mmc.h
@@ -64,14 +64,14 @@
#define MMC_AC_CMD_RCA_MASK (unsigned int)(0xFFFF << 16)
#define MMC_BC_CMD_DSR_MASK (unsigned int)(0xFFFF << 16)
-#define MMC_DSR_DEFAULT (0x0404)
-#define SD_CMD8_CHECK_PATTERN (0xAA)
+#define MMC_DSR_DEFAULT 0x0404
+#define SD_CMD8_CHECK_PATTERN 0xAA
#define SD_CMD8_2_7_3_6_V_RANGE (0x01 << 8)
/* Clock Configurations and Macros */
-#define MMC_CLOCK_REFERENCE (96)
-#define MMC_RELATIVE_CARD_ADDRESS (0x1234)
+#define MMC_CLOCK_REFERENCE 96
+#define MMC_RELATIVE_CARD_ADDRESS 0x1234
#define MMC_INIT_SEQ_CLK (MMC_CLOCK_REFERENCE * 1000 / 80)
#define MMC_400kHz_CLK (MMC_CLOCK_REFERENCE * 1000 / 400)
#define CLKDR(r, f, u) ((((r)*100) / ((f)*(u))) + 1)
@@ -85,12 +85,12 @@
#define MMC_OCR_REG_HOST_CAPACITY_SUPPORT_BYTE (0x0 << 30)
#define MMC_OCR_REG_HOST_CAPACITY_SUPPORT_SECTOR (0x1 << 30)
-#define MMC_SD2_CSD_C_SIZE_LSB_MASK (0xFFFF)
-#define MMC_SD2_CSD_C_SIZE_MSB_MASK (0x003F)
-#define MMC_SD2_CSD_C_SIZE_MSB_OFFSET (16)
-#define MMC_CSD_C_SIZE_LSB_MASK (0x0003)
-#define MMC_CSD_C_SIZE_MSB_MASK (0x03FF)
-#define MMC_CSD_C_SIZE_MSB_OFFSET (2)
+#define MMC_SD2_CSD_C_SIZE_LSB_MASK 0xFFFF
+#define MMC_SD2_CSD_C_SIZE_MSB_MASK 0x003F
+#define MMC_SD2_CSD_C_SIZE_MSB_OFFSET 16
+#define MMC_CSD_C_SIZE_LSB_MASK 0x0003
+#define MMC_CSD_C_SIZE_MSB_MASK 0x03FF
+#define MMC_CSD_C_SIZE_MSB_OFFSET 2
#define MMC_CSD_TRAN_SPEED_UNIT_MASK (0x07 << 0)
#define MMC_CSD_TRAN_SPEED_FACTOR_MASK (0x0F << 3)
Index: u-boot-arm/include/asm-arm/arch-omap3/mmc_host_def.h
===================================================================
--- u-boot-arm.orig/include/asm-arm/arch-omap3/mmc_host_def.h
+++ u-boot-arm/include/asm-arm/arch-omap3/mmc_host_def.h
@@ -141,7 +141,7 @@
#define VS18_1V8SUP (1 << 26)
/* Driver definitions */
-#define MMCSD_SECTOR_SIZE (512)
+#define MMCSD_SECTOR_SIZE 512
#define MMC_CARD 0
#define SD_CARD 1
#define BYTE_MODE 0
Index: u-boot-arm/include/asm-arm/arch-omap3/omap3.h
===================================================================
--- u-boot-arm.orig/include/asm-arm/arch-omap3/omap3.h
+++ u-boot-arm/include/asm-arm/arch-omap3/omap3.h
@@ -30,7 +30,7 @@
#define SMX_APE_BASE 0x68000000
/* GPMC */
-#define OMAP34XX_GPMC_BASE (0x6E000000)
+#define OMAP34XX_GPMC_BASE 0x6E000000
/* SMS */
#define OMAP34XX_SMS_BASE 0x6C000000
@@ -47,12 +47,12 @@
#define OMAP34XX_L4_IO_BASE OMAP34XX_CORE_L4_IO_BASE
/* CONTROL */
-#define OMAP34XX_CTRL_BASE (OMAP34XX_L4_IO_BASE+0x2000)
+#define OMAP34XX_CTRL_BASE (OMAP34XX_L4_IO_BASE + 0x2000)
/* UART */
-#define OMAP34XX_UART1 (OMAP34XX_L4_IO_BASE+0x6a000)
-#define OMAP34XX_UART2 (OMAP34XX_L4_IO_BASE+0x6c000)
-#define OMAP34XX_UART3 (OMAP34XX_L4_PER+0x20000)
+#define OMAP34XX_UART1 (OMAP34XX_L4_IO_BASE + 0x6a000)
+#define OMAP34XX_UART2 (OMAP34XX_L4_IO_BASE + 0x6c000)
+#define OMAP34XX_UART3 (OMAP34XX_L4_PER + 0x20000)
/* General Purpose Timers */
#define OMAP34XX_GPT1 0x48318000
@@ -69,13 +69,13 @@
#define OMAP34XX_GPT12 0x48304000
/* WatchDog Timers (1 secure, 3 GP) */
-#define WD1_BASE (0x4830C000)
-#define WD2_BASE (0x48314000)
-#define WD3_BASE (0x49030000)
+#define WD1_BASE 0x4830C000
+#define WD2_BASE 0x48314000
+#define WD3_BASE 0x49030000
/* 32KTIMER */
-#define SYNC_32KTIMER_BASE (0x48320000)
-#define S32K_CR (SYNC_32KTIMER_BASE+0x10)
+#define SYNC_32KTIMER_BASE 0x48320000
+#define S32K_CR (SYNC_32KTIMER_BASE + 0x10)
/* omap3 GPIO registers */
#define OMAP34XX_GPIO1_BASE 0x48310000
@@ -89,7 +89,7 @@
#define SRAM_OFFSET0 0x40000000
#define SRAM_OFFSET1 0x00200000
#define SRAM_OFFSET2 0x0000F800
-#define SRAM_VECT_CODE (SRAM_OFFSET0|SRAM_OFFSET1|\
+#define SRAM_VECT_CODE (SRAM_OFFSET0 | SRAM_OFFSET1 | \
SRAM_OFFSET2)
#define LOW_LEVEL_SRAM_STACK 0x4020FFFC
More information about the U-Boot
mailing list