[U-Boot] [PATCH 1/1] Setup extra MIMC200 chip selects

[Mark Jackson]

Added code to setup the extra Flash and FRAM chip selects
as used on the MIMC200 board.

Signed-off-by: Mark Jackson <mpfj at mimc.co.uk>

---
 cpu/at32ap/cpu.c |   14 ++++++++++++++
 1 files changed, 14 insertions(+), 0 deletions(-)

diff --git a/cpu/at32ap/cpu.c b/cpu/at32ap/cpu.c
index 1a13702..3902efe 100644
--- a/cpu/at32ap/cpu.c
+++ b/cpu/at32ap/cpu.c
@@ -56,6 +56,20 @@ int cpu_init(void)
 	hsmc3_writel(PULSE0, 0x0b0a0906);
 	hsmc3_writel(SETUP0, 0x00010002);
 
+#ifdef CONFIG_MIMC200
+	/* setup Data Flash chip select (NCS2) */
+	hsmc3_writel(MODE2, 0x20121003);
+	hsmc3_writel(CYCLE2, 0x000a0009);
+	hsmc3_writel(PULSE2, 0x0a060806);
+	hsmc3_writel(SETUP2, 0x00030102);
+
+	/* setup FRAM chip select (NCS3) */
+	hsmc3_writel(MODE3, 0x10120001);
+	hsmc3_writel(CYCLE3, 0x001e001d);
+	hsmc3_writel(PULSE3, 0x08040704);
+	hsmc3_writel(SETUP3, 0x02050204);
+#endif
+ 
 	clk_init();
 
 	/* Update the CPU speed according to the PLL configuration */