[U-Boot] Building u-boot for the AT91RM9200-EK circa 2008

[Pink Boy]

Jean-Christophe sez,

> > make distclean
> > make at91sam9263ek_config

Sorry bad paste job that should be 

make at91rm9200ek_config.

> > make
> CROSS_COMPILE=<path_to_cross-compiler/cross-compiler-prefix->
> why do you try to use the at91sam9263ek board on the
> AT91RM9200EK?
> 
> and the AT91RM9200EK is not so far from the AT91SAM9200DK
> which is mainline and they are not so much different execept 
> some PIO settings

I could try that and see it it will work.  Would be nice to have 
some sort of peg in the ground what I can build something that
works.
 
> IIRC Ulf send some patch 2 years ago
> 
> Maybe he can resend a rebased version?

Would have been nice if they'd included it considering that the 
AT91rm9200-ek is an odd ball with no real long term future.

I'll try the AT91RM9200DK and see if I can get anything out of 
that.  I worry that with the old source I can't get a working 
tool chain for it.

How hard would it be to have a standard Hello World program build
on u-boot that just does a bare init of the hardware and spits 
"Oh Hai" out the serial port?  At least then you can verify that
the tool chain and startup code is mostly working.

Hmmm...

Matthew Harper
Tehama Wireless.