[U-Boot] [PATCH 06/12 v2] ARM: OMAP3: Add board, clock and interrupts common files

dirk.behme at googlemail.com dirk.behme at googlemail.com
Fri Oct 3 12:39:47 CEST 2008


Subject: [PATCH 06/12 v2] ARM: OMAP3: Add board, clock and interrupts common files

From: Dirk Behme <dirk.behme at gmail.com>

Add board, clock, cpu and interrupts common files

Signed-off-by: Dirk Behme <dirk.behme at gmail.com>

---
Changes in version v2:

- Move common ARM Cortex A8 code to cpu/arm_cortexa8/ and OMAP3 SoC specific common code to cpu/arm_cortexa8/omap3 as proposed by Wolfgang.

 cpu/arm_cortexa8/omap3/Makefile     |    2 
 cpu/arm_cortexa8/omap3/board.c      |  294 ++++++++++++++++++++++++++++++++++
 cpu/arm_cortexa8/omap3/clock.c      |  305 ++++++++++++++++++++++++++++++++++++
 cpu/arm_cortexa8/omap3/interrupts.c |  304 +++++++++++++++++++++++++++++++++++
 4 files changed, 904 insertions(+), 1 deletion(-)

Index: u-boot-arm/cpu/arm_cortexa8/omap3/Makefile
===================================================================
--- u-boot-arm.orig/cpu/arm_cortexa8/omap3/Makefile
+++ u-boot-arm/cpu/arm_cortexa8/omap3/Makefile
@@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk
 LIB	= lib$(SOC).a
 
 SOBJS	:= lowlevel_init.o
-OBJS	:= sys_info.o
+OBJS	:= sys_info.o board.o clock.o interrupts.o
 
 all:	.depend $(LIB)
 
Index: u-boot-arm/cpu/arm_cortexa8/omap3/board.c
===================================================================
--- /dev/null
+++ u-boot-arm/cpu/arm_cortexa8/omap3/board.c
@@ -0,0 +1,294 @@
+/*
+ *
+ * Common board functions for OMAP3 based boards.
+ *
+ * (C) Copyright 2004-2008
+ * Texas Instruments, <www.ti.com>
+ *
+ * Author :
+ *      Sunil Kumar <sunilsaini05 at gmail.com>
+ *      Shashi Ranjan <shashiranjanmca05 at gmail.com>
+ *
+ * Derived from Beagle Board and 3430 SDP code by
+ *      Richard Woodruff <r-woodruff2 at ti.com>
+ *      Syed Mohammed Khasim <khasim at ti.com>
+ *
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/bits.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/mem.h>
+
+#define NOT_EARLY 0
+
+/* Permission values for registers -Full fledged permissions to all */
+#define UNLOCK_1 0xFFFFFFFF
+#define UNLOCK_2 0x00000000
+#define UNLOCK_3 0x0000FFFF
+
+/******************************************************************************
+ * Routine: delay
+ * Description: spinning delay to use before udelay works
+ *****************************************************************************/
+static inline void delay(unsigned long loops)
+{
+	__asm__ volatile ("1:\n" "subs %0, %1, #1\n"
+			  "bne 1b":"=r" (loops):"0"(loops));
+}
+
+/******************************************************************************
+ * Routine: secure_unlock
+ * Description: Setup security registers for access
+ *              (GP Device only)
+ *****************************************************************************/
+void secure_unlock_mem(void)
+{
+	/* Protection Module Register Target APE (PM_RT) */
+	__raw_writel(UNLOCK_1, RT_REQ_INFO_PERMISSION_1);
+	__raw_writel(UNLOCK_1, RT_READ_PERMISSION_0);
+	__raw_writel(UNLOCK_1, RT_WRITE_PERMISSION_0);
+	__raw_writel(UNLOCK_2, RT_ADDR_MATCH_1);
+
+	__raw_writel(UNLOCK_3, GPMC_REQ_INFO_PERMISSION_0);
+	__raw_writel(UNLOCK_3, GPMC_READ_PERMISSION_0);
+	__raw_writel(UNLOCK_3, GPMC_WRITE_PERMISSION_0);
+
+	__raw_writel(UNLOCK_3, OCM_REQ_INFO_PERMISSION_0);
+	__raw_writel(UNLOCK_3, OCM_READ_PERMISSION_0);
+	__raw_writel(UNLOCK_3, OCM_WRITE_PERMISSION_0);
+	__raw_writel(UNLOCK_2, OCM_ADDR_MATCH_2);
+
+	/* IVA Changes */
+	__raw_writel(UNLOCK_3, IVA2_REQ_INFO_PERMISSION_0);
+	__raw_writel(UNLOCK_3, IVA2_READ_PERMISSION_0);
+	__raw_writel(UNLOCK_3, IVA2_WRITE_PERMISSION_0);
+
+	__raw_writel(UNLOCK_1, SMS_RG_ATT0);	/* SDRC region 0 public */
+}
+
+/******************************************************************************
+ * Routine: secureworld_exit()
+ * Description: If chip is EMU and boot type is external
+ *		configure secure registers and exit secure world
+ *              general use.
+ *****************************************************************************/
+void secureworld_exit()
+{
+	unsigned long i;
+
+	/* configrue non-secure access control register */
+	__asm__ __volatile__("mrc p15, 0, %0, c1, c1, 2":"=r"(i));
+	/* enabling co-processor CP10 and CP11 accesses in NS world */
+	__asm__ __volatile__("orr %0, %0, #0xC00":"=r"(i));
+	/* allow allocation of locked TLBs and L2 lines in NS world */
+	/* allow use of PLE registers in NS world also */
+	__asm__ __volatile__("orr %0, %0, #0x70000":"=r"(i));
+	__asm__ __volatile__("mcr p15, 0, %0, c1, c1, 2":"=r"(i));
+
+	/* Enable ASA in ACR register */
+	__asm__ __volatile__("mrc p15, 0, %0, c1, c0, 1":"=r"(i));
+	__asm__ __volatile__("orr %0, %0, #0x10":"=r"(i));
+	__asm__ __volatile__("mcr p15, 0, %0, c1, c0, 1":"=r"(i));
+
+	/* Exiting secure world */
+	__asm__ __volatile__("mrc p15, 0, %0, c1, c1, 0":"=r"(i));
+	__asm__ __volatile__("orr %0, %0, #0x31":"=r"(i));
+	__asm__ __volatile__("mcr p15, 0, %0, c1, c1, 0":"=r"(i));
+}
+
+/******************************************************************************
+ * Routine: setup_auxcr()
+ * Description: Write to AuxCR desired value using SMI.
+ *              general use.
+ *****************************************************************************/
+void setup_auxcr()
+{
+	unsigned long i;
+	volatile unsigned int j;
+	/* Save r0, r12 and restore them after usage */
+	__asm__ __volatile__("mov %0, r12":"=r"(j));
+	__asm__ __volatile__("mov %0, r0":"=r"(i));
+
+	/* GP Device ROM code API usage here */
+	/* r12 = AUXCR Write function and r0 value */
+	__asm__ __volatile__("mov r12, #0x3");
+	__asm__ __volatile__("mrc p15, 0, r0, c1, c0, 1");
+	/* Enabling ASA */
+	__asm__ __volatile__("orr r0, r0, #0x10");
+	/* SMI instruction to call ROM Code API */
+	__asm__ __volatile__(".word 0xE1600070");
+	__asm__ __volatile__("mov r0, %0":"=r"(i));
+	__asm__ __volatile__("mov r12, %0":"=r"(j));
+}
+
+/******************************************************************************
+ * Routine: try_unlock_sram()
+ * Description: If chip is GP/EMU(special) type, unlock the SRAM for
+ *              general use.
+ *****************************************************************************/
+void try_unlock_memory()
+{
+	int mode;
+	int in_sdram = running_in_sdram();
+
+	/* if GP device unlock device SRAM for general use */
+	/* secure code breaks for Secure/Emulation device - HS/E/T */
+	mode = get_device_type();
+	if (mode == GP_DEVICE)
+		secure_unlock_mem();
+
+	/* If device is EMU and boot is XIP external booting
+	 * Unlock firewalls and disable L2 and put chip
+	 * out of secure world
+	 */
+	/* Assuming memories are unlocked by the demon who put us in SDRAM */
+	if ((mode <= EMU_DEVICE) && (get_boot_type() == 0x1F)
+	    && (!in_sdram)) {
+		secure_unlock_mem();
+		secureworld_exit();
+	}
+
+	return;
+}
+
+/******************************************************************************
+ * Routine: s_init
+ * Description: Does early system init of muxing and clocks.
+ *              - Called path is with SRAM stack.
+ *****************************************************************************/
+void s_init(void)
+{
+	int in_sdram = running_in_sdram();
+
+	watchdog_init();
+
+	try_unlock_memory();
+
+	/* Right now flushing at low MPU speed.
+	   Need to move after clock init */
+	v7_flush_dcache_all(get_device_type());
+#ifndef CONFIG_ICACHE_OFF
+	icache_enable();
+#endif
+
+#ifdef CONFIG_L2_OFF
+	l2cache_disable();
+#else
+	l2cache_enable();
+#endif
+	/* Writing to AuxCR in U-boot using SMI for GP DEV */
+	/* Currently SMI in Kernel on ES2 devices seems to have an isse
+	 * Once that is resolved, we can postpone this config to kernel
+	 */
+	if (get_device_type() == GP_DEVICE)
+		setup_auxcr();
+
+	set_muxconf_regs();
+	delay(100);
+
+	prcm_init();
+
+	per_clocks_enable();
+
+	if (!in_sdram)
+		sdrc_init();
+}
+
+/******************************************************************************
+ * Routine: wait_for_command_complete
+ * Description: Wait for posting to finish on watchdog
+ *****************************************************************************/
+void wait_for_command_complete(unsigned int wd_base)
+{
+	int pending = 1;
+	do {
+		pending = __raw_readl(wd_base + WWPS);
+	} while (pending);
+}
+
+/******************************************************************************
+ * Routine: watchdog_init
+ * Description: Shut down watch dogs
+ *****************************************************************************/
+void watchdog_init(void)
+{
+	/* There are 3 watch dogs WD1=Secure, WD2=MPU, WD3=IVA. WD1 is
+	 * either taken care of by ROM (HS/EMU) or not accessible (GP).
+	 * We need to take care of WD2-MPU or take a PRCM reset. WD3
+	 * should not be running and does not generate a PRCM reset.
+	 */
+
+	sr32(CM_FCLKEN_WKUP, 5, 1, 1);
+	sr32(CM_ICLKEN_WKUP, 5, 1, 1);
+	wait_on_value(BIT5, 0x20, CM_IDLEST_WKUP, 5);	/* some issue here */
+
+	__raw_writel(WD_UNLOCK1, WD2_BASE + WSPR);
+	wait_for_command_complete(WD2_BASE);
+	__raw_writel(WD_UNLOCK2, WD2_BASE + WSPR);
+}
+
+/******************************************************************************
+ * Routine: dram_init
+ * Description: sets uboots idea of sdram size
+ *****************************************************************************/
+int dram_init(void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+	unsigned int size0 = 0, size1 = 0;
+	u32 mtype, btype;
+
+	btype = get_board_type();
+	mtype = get_mem_type();
+
+	display_board_info(btype);
+
+	/* If a second bank of DDR is attached to CS1 this is
+	 * where it can be started.  Early init code will init
+	 * memory on CS0.
+	 */
+	if ((mtype == DDR_COMBO) || (mtype == DDR_STACKED))
+		do_sdrc_init(SDRC_CS1_OSET, NOT_EARLY);
+
+	size0 = get_sdr_cs_size(SDRC_CS0_OSET);
+	size1 = get_sdr_cs_size(SDRC_CS1_OSET);
+
+	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+	gd->bd->bi_dram[0].size = size0;
+	gd->bd->bi_dram[1].start = PHYS_SDRAM_1 + size0;
+	gd->bd->bi_dram[1].size = size1;
+
+	return 0;
+}
+
+/******************************************************************************
+ * Dummy function to handle errors for EABI incompatibility
+ *****************************************************************************/
+void raise(void)
+{
+}
+
+/******************************************************************************
+ * Dummy function to handle errors for EABI incompatibility
+ *****************************************************************************/
+void abort(void)
+{
+}
Index: u-boot-arm/cpu/arm_cortexa8/omap3/clock.c
===================================================================
--- /dev/null
+++ u-boot-arm/cpu/arm_cortexa8/omap3/clock.c
@@ -0,0 +1,305 @@
+/*
+ * (C) Copyright 2008
+ * Texas Instruments, <www.ti.com>
+ *
+ * Author :
+ *      Manikandan Pillai <mani.pillai at ti.com>
+ *
+ * Derived from Beagle Board and OMAP3 SDP code by
+ *      Richard Woodruff <r-woodruff2 at ti.com>
+ *      Syed Mohammed Khasim <khasim at ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/bits.h>
+#include <asm/arch/clocks.h>
+#include <asm/arch/clocks_omap3.h>
+#include <asm/arch/mem.h>
+#include <asm/arch/sys_proto.h>
+#include <environment.h>
+#include <command.h>
+
+/******************************************************************************
+ * get_sys_clk_speed() - determine reference oscillator speed
+ *                       based on known 32kHz clock and gptimer.
+ *****************************************************************************/
+u32 get_osc_clk_speed(void)
+{
+	u32 start, cstart, cend, cdiff, val;
+
+	val = __raw_readl(PRM_CLKSRC_CTRL);
+
+	/* If SYS_CLK is being divided by 2, remove for now */
+	val = (val & (~BIT7)) | BIT6;
+	__raw_writel(val, PRM_CLKSRC_CTRL);
+
+	/* enable timer2 */
+	val = __raw_readl(CM_CLKSEL_WKUP) | BIT0;
+	__raw_writel(val, CM_CLKSEL_WKUP);	/* select sys_clk for GPT1 */
+
+	/* Enable I and F Clocks for GPT1 */
+	val = __raw_readl(CM_ICLKEN_WKUP) | BIT0 | BIT2;
+	__raw_writel(val, CM_ICLKEN_WKUP);
+	val = __raw_readl(CM_FCLKEN_WKUP) | BIT0;
+	__raw_writel(val, CM_FCLKEN_WKUP);
+
+	__raw_writel(0, OMAP34XX_GPT1 + TLDR);	/* start counting at 0 */
+	__raw_writel(GPT_EN, OMAP34XX_GPT1 + TCLR);	/* enable clock */
+
+	/* enable 32kHz source, determine sys_clk via gauging */
+	start = 20 + __raw_readl(S32K_CR);	/* start time in 20 cycles */
+	while (__raw_readl(S32K_CR) < start) ;	/* dead loop till start time */
+	/* get start sys_clk count */
+	cstart = __raw_readl(OMAP34XX_GPT1 + TCRR);
+	/* wait for 40 cycles */
+	while (__raw_readl(S32K_CR) < (start + 20)) ;
+	cend = __raw_readl(OMAP34XX_GPT1 + TCRR);  /* get end sys_clk count */
+	cdiff = cend - cstart;	/* get elapsed ticks */
+
+	/* based on number of ticks assign speed */
+	if (cdiff > 19000)
+		return S38_4M;
+	else if (cdiff > 15200)
+		return S26M;
+	else if (cdiff > 13000)
+		return S24M;
+	else if (cdiff > 9000)
+		return S19_2M;
+	else if (cdiff > 7600)
+		return S13M;
+	else
+		return S12M;
+}
+
+/******************************************************************************
+ * get_sys_clkin_sel() - returns the sys_clkin_sel field value based on
+ *                       input oscillator clock frequency.
+ *****************************************************************************/
+void get_sys_clkin_sel(u32 osc_clk, u32 *sys_clkin_sel)
+{
+	if (osc_clk == S38_4M)
+		*sys_clkin_sel = 4;
+	else if (osc_clk == S26M)
+		*sys_clkin_sel = 3;
+	else if (osc_clk == S19_2M)
+		*sys_clkin_sel = 2;
+	else if (osc_clk == S13M)
+		*sys_clkin_sel = 1;
+	else if (osc_clk == S12M)
+		*sys_clkin_sel = 0;
+}
+
+/******************************************************************************
+ * prcm_init() - inits clocks for PRCM as defined in clocks.h
+ *               called from SRAM, or Flash (using temp SRAM stack).
+ *****************************************************************************/
+void prcm_init(void)
+{
+	void (*f_lock_pll) (u32, u32, u32, u32);
+	int xip_safe, p0, p1, p2, p3;
+	u32 osc_clk = 0, sys_clkin_sel;
+	u32 clk_index, sil_index;
+	dpll_param *dpll_param_p;
+
+	f_lock_pll = (void *) ((u32) &_end_vect - (u32) &_start +
+			       SRAM_VECT_CODE);
+
+	xip_safe = running_in_sram();
+
+	/* Gauge the input clock speed and find out the sys_clkin_sel
+	 * value corresponding to the input clock.
+	 */
+	osc_clk = get_osc_clk_speed();
+	get_sys_clkin_sel(osc_clk, &sys_clkin_sel);
+
+	sr32(PRM_CLKSEL, 0, 3, sys_clkin_sel);	/* set input crystal speed */
+
+	/* If the input clock is greater than 19.2M always divide/2 */
+	if (sys_clkin_sel > 2) {
+		sr32(PRM_CLKSRC_CTRL, 6, 2, 2);	/* input clock divider */
+		clk_index = sys_clkin_sel / 2;
+	} else {
+		sr32(PRM_CLKSRC_CTRL, 6, 2, 1);	/* input clock divider */
+		clk_index = sys_clkin_sel;
+	}
+
+	/* The DPLL tables are defined according to sysclk value and
+	 * silicon revision. The clk_index value will be used to get
+	 * the values for that input sysclk from the DPLL param table
+	 * and sil_index will get the values for that SysClk for the
+	 * appropriate silicon rev.
+	 */
+	sil_index = get_cpu_rev() - 1;
+	/* Unlock MPU DPLL (slows things down, and needed later) */
+	sr32(CM_CLKEN_PLL_MPU, 0, 3, PLL_LOW_POWER_BYPASS);
+	wait_on_value(BIT0, 0, CM_IDLEST_PLL_MPU, LDELAY);
+
+	/* Getting the base address of Core DPLL param table */
+	dpll_param_p = (dpll_param *) get_core_dpll_param();
+	/* Moving it to the right sysclk and ES rev base */
+	dpll_param_p = dpll_param_p + 3 * clk_index + sil_index;
+	if (xip_safe) {
+		/* CORE DPLL */
+		/* sr32(CM_CLKSEL2_EMU) set override to work when asleep */
+		sr32(CM_CLKEN_PLL, 0, 3, PLL_FAST_RELOCK_BYPASS);
+		wait_on_value(BIT0, 0, CM_IDLEST_CKGEN, LDELAY);
+		/* For OMAP3 ES1.0 Errata 1.50, default value directly doesnt
+		   work. write another value and then default value. */
+		sr32(CM_CLKSEL1_EMU, 16, 5, CORE_M3X2 + 1);	/* m3x2 */
+		sr32(CM_CLKSEL1_EMU, 16, 5, CORE_M3X2);	        /* m3x2 */
+		sr32(CM_CLKSEL1_PLL, 27, 2, dpll_param_p->m2);	/* Set M2 */
+		sr32(CM_CLKSEL1_PLL, 16, 11, dpll_param_p->m);	/* Set M */
+		sr32(CM_CLKSEL1_PLL, 8, 7, dpll_param_p->n);	/* Set N */
+		sr32(CM_CLKSEL1_PLL, 6, 1, 0);	                /* 96M Src */
+		sr32(CM_CLKSEL_CORE, 8, 4, CORE_SSI_DIV);	/* ssi */
+		sr32(CM_CLKSEL_CORE, 4, 2, CORE_FUSB_DIV);	/* fsusb */
+		sr32(CM_CLKSEL_CORE, 2, 2, CORE_L4_DIV);	/* l4 */
+		sr32(CM_CLKSEL_CORE, 0, 2, CORE_L3_DIV);	/* l3 */
+		sr32(CM_CLKSEL_GFX, 0, 3, GFX_DIV);	        /* gfx */
+		sr32(CM_CLKSEL_WKUP, 1, 2, WKUP_RSM);	        /* reset mgr */
+		sr32(CM_CLKEN_PLL, 4, 4, dpll_param_p->fsel);	/* FREQSEL */
+		sr32(CM_CLKEN_PLL, 0, 3, PLL_LOCK);	        /* lock mode */
+		wait_on_value(BIT0, 1, CM_IDLEST_CKGEN, LDELAY);
+	} else if (running_in_flash()) {
+		/* if running from flash, jump to small relocated code
+		   area in SRAM. */
+		p0 = __raw_readl(CM_CLKEN_PLL);
+		sr32((u32) &p0, 0, 3, PLL_FAST_RELOCK_BYPASS);
+		sr32((u32) &p0, 4, 4, dpll_param_p->fsel);	/* FREQSEL */
+
+		p1 = __raw_readl(CM_CLKSEL1_PLL);
+		sr32((u32) &p1, 27, 2, dpll_param_p->m2);	/* Set M2 */
+		sr32((u32) &p1, 16, 11, dpll_param_p->m);	/* Set M */
+		sr32((u32) &p1, 8, 7, dpll_param_p->n);	        /* Set N */
+		sr32((u32) &p1, 6, 1, 0);	    /* set source for 96M */
+		p2 = __raw_readl(CM_CLKSEL_CORE);
+		sr32((u32) &p2, 8, 4, CORE_SSI_DIV);	/* ssi */
+		sr32((u32) &p2, 4, 2, CORE_FUSB_DIV);	/* fsusb */
+		sr32((u32) &p2, 2, 2, CORE_L4_DIV);	/* l4 */
+		sr32((u32) &p2, 0, 2, CORE_L3_DIV);	/* l3 */
+
+		p3 = CM_IDLEST_CKGEN;
+
+		(*f_lock_pll) (p0, p1, p2, p3);
+	}
+
+	/* PER DPLL */
+	sr32(CM_CLKEN_PLL, 16, 3, PLL_STOP);
+	wait_on_value(BIT1, 0, CM_IDLEST_CKGEN, LDELAY);
+
+	/* Getting the base address to PER  DPLL param table */
+	/* Set N */
+	dpll_param_p = (dpll_param *) get_per_dpll_param();
+	/* Moving it to the right sysclk base */
+	dpll_param_p = dpll_param_p + clk_index;
+	/* Errata 1.50 Workaround for OMAP3 ES1.0 only */
+	/* If using default divisors, write default divisor + 1
+	   and then the actual divisor value */
+	sr32(CM_CLKSEL1_EMU, 24, 5, PER_M6X2 + 1);	  /* set M6 */
+	sr32(CM_CLKSEL1_EMU, 24, 5, PER_M6X2);	          /* set M6 */
+	sr32(CM_CLKSEL_CAM, 0, 5, PER_M5X2 + 1);	  /* set M5 */
+	sr32(CM_CLKSEL_CAM, 0, 5, PER_M5X2);	          /* set M5 */
+	sr32(CM_CLKSEL_DSS, 0, 5, PER_M4X2 + 1);	  /* set M4 */
+	sr32(CM_CLKSEL_DSS, 0, 5, PER_M4X2);	          /* set M4 */
+	sr32(CM_CLKSEL_DSS, 8, 5, PER_M3X2 + 1);	  /* set M3 */
+	sr32(CM_CLKSEL_DSS, 8, 5, PER_M3X2);	          /* set M3 */
+	sr32(CM_CLKSEL3_PLL, 0, 5, dpll_param_p->m2 + 1); /* set M2 */
+	sr32(CM_CLKSEL3_PLL, 0, 5, dpll_param_p->m2);	  /* set M2 */
+	/* Workaround end */
+	sr32(CM_CLKSEL2_PLL, 8, 11, dpll_param_p->m);	/* set m */
+	sr32(CM_CLKSEL2_PLL, 0, 7, dpll_param_p->n);	/* set n */
+	sr32(CM_CLKEN_PLL, 20, 4, dpll_param_p->fsel);	/* FREQSEL */
+	sr32(CM_CLKEN_PLL, 16, 3, PLL_LOCK);	/* lock mode */
+	wait_on_value(BIT1, 2, CM_IDLEST_CKGEN, LDELAY);
+
+	/* Getting the base address to MPU DPLL param table */
+	dpll_param_p = (dpll_param *) get_mpu_dpll_param();
+	/* Moving it to the right sysclk and ES rev base */
+	dpll_param_p = dpll_param_p + 3 * clk_index + sil_index;
+	/* MPU DPLL (unlocked already) */
+	sr32(CM_CLKSEL2_PLL_MPU, 0, 5, dpll_param_p->m2);	/* Set M2 */
+	sr32(CM_CLKSEL1_PLL_MPU, 8, 11, dpll_param_p->m);	/* Set M */
+	sr32(CM_CLKSEL1_PLL_MPU, 0, 7, dpll_param_p->n);	/* Set N */
+	sr32(CM_CLKEN_PLL_MPU, 4, 4, dpll_param_p->fsel);	/* FREQSEL */
+	sr32(CM_CLKEN_PLL_MPU, 0, 3, PLL_LOCK);	/* lock mode */
+	wait_on_value(BIT0, 1, CM_IDLEST_PLL_MPU, LDELAY);
+
+	/* Getting the base address to IVA DPLL param table */
+	dpll_param_p = (dpll_param *) get_iva_dpll_param();
+	/* Moving it to the right sysclk and ES rev base */
+	dpll_param_p = dpll_param_p + 3 * clk_index + sil_index;
+	/* IVA DPLL (set to 12*20=240MHz) */
+	sr32(CM_CLKEN_PLL_IVA2, 0, 3, PLL_STOP);
+	wait_on_value(BIT0, 0, CM_IDLEST_PLL_IVA2, LDELAY);
+	sr32(CM_CLKSEL2_PLL_IVA2, 0, 5, dpll_param_p->m2);	/* set M2 */
+	sr32(CM_CLKSEL1_PLL_IVA2, 8, 11, dpll_param_p->m);	/* set M */
+	sr32(CM_CLKSEL1_PLL_IVA2, 0, 7, dpll_param_p->n);	/* set N */
+	sr32(CM_CLKEN_PLL_IVA2, 4, 4, dpll_param_p->fsel);	/* FREQSEL */
+	sr32(CM_CLKEN_PLL_IVA2, 0, 3, PLL_LOCK);	/* lock mode */
+	wait_on_value(BIT0, 1, CM_IDLEST_PLL_IVA2, LDELAY);
+
+	/* Set up GPTimers to sys_clk source only */
+	sr32(CM_CLKSEL_PER, 0, 8, 0xff);
+	sr32(CM_CLKSEL_WKUP, 0, 1, 1);
+
+	sdelay(5000);
+}
+
+/******************************************************************************
+ * peripheral_enable() - Enable the clks & power for perifs (GPT2, UART1,...)
+ *****************************************************************************/
+void per_clocks_enable(void)
+{
+	/* Enable GP2 timer. */
+	sr32(CM_CLKSEL_PER, 0, 1, 0x1);	/* GPT2 = sys clk */
+	sr32(CM_ICLKEN_PER, 3, 1, 0x1);	/* ICKen GPT2 */
+	sr32(CM_FCLKEN_PER, 3, 1, 0x1);	/* FCKen GPT2 */
+
+#ifdef CONFIG_SYS_NS16550
+	/* Enable UART1 clocks */
+	sr32(CM_FCLKEN1_CORE, 13, 1, 0x1);
+	sr32(CM_ICLKEN1_CORE, 13, 1, 0x1);
+
+	/* UART 3 Clocks */
+	sr32(CM_FCLKEN_PER, 11, 1, 0x1);
+	sr32(CM_ICLKEN_PER, 11, 1, 0x1);
+#endif
+#ifdef CONFIG_DRIVER_OMAP34XX_I2C
+	/* Turn on all 3 I2C clocks */
+	sr32(CM_FCLKEN1_CORE, 15, 3, 0x7);
+	sr32(CM_ICLKEN1_CORE, 15, 3, 0x7);	/* I2C1,2,3 = on */
+#endif
+	/* Enable the ICLK for 32K Sync Timer as its used in udelay */
+	sr32(CM_ICLKEN_WKUP, 2, 1, 0x1);
+
+	sr32(CM_FCLKEN_IVA2, 0, 32, FCK_IVA2_ON);
+	sr32(CM_FCLKEN1_CORE, 0, 32, FCK_CORE1_ON);
+	sr32(CM_ICLKEN1_CORE, 0, 32, ICK_CORE1_ON);
+	sr32(CM_ICLKEN2_CORE, 0, 32, ICK_CORE2_ON);
+	sr32(CM_FCLKEN_WKUP, 0, 32, FCK_WKUP_ON);
+	sr32(CM_ICLKEN_WKUP, 0, 32, ICK_WKUP_ON);
+	sr32(CM_FCLKEN_DSS, 0, 32, FCK_DSS_ON);
+	sr32(CM_ICLKEN_DSS, 0, 32, ICK_DSS_ON);
+	sr32(CM_FCLKEN_CAM, 0, 32, FCK_CAM_ON);
+	sr32(CM_ICLKEN_CAM, 0, 32, ICK_CAM_ON);
+	sr32(CM_FCLKEN_PER, 0, 32, FCK_PER_ON);
+	sr32(CM_ICLKEN_PER, 0, 32, ICK_PER_ON);
+
+	sdelay(1000);
+}
Index: u-boot-arm/cpu/arm_cortexa8/omap3/interrupts.c
===================================================================
--- /dev/null
+++ u-boot-arm/cpu/arm_cortexa8/omap3/interrupts.c
@@ -0,0 +1,304 @@
+/*
+ * (C) Copyright 2008
+ * Texas Instruments
+ *
+ * Richard Woodruff <r-woodruff2 at ti.com>
+ * Syed Moahmmed Khasim <khasim at ti.com>
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger at sysgo.de>
+ * Alex Zuepke <azu at sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <gj at denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/bits.h>
+
+#include <asm/proc-armv/ptrace.h>
+
+#define TIMER_LOAD_VAL 0
+
+/* macro to read the 32 bit timer */
+#define READ_TIMER (*(volatile ulong *)(CONFIG_SYS_TIMERBASE+TCRR))
+
+#ifdef CONFIG_USE_IRQ
+/* enable IRQ interrupts */
+void enable_interrupts(void)
+{
+	unsigned long temp;
+	__asm__ __volatile__("mrs %0, cpsr\n"
+			     "bic %0, %0, #0x80\n" "msr cpsr_c, %0":"=r"(temp)
+			     ::"memory");
+}
+
+/*
+ * disable IRQ/FIQ interrupts
+ * returns true if interrupts had been enabled before we disabled them
+ */
+int disable_interrupts(void)
+{
+	unsigned long old, temp;
+	__asm__ __volatile__("mrs %0, cpsr\n"
+			     "orr %1, %0, #0xc0\n"
+			     "msr cpsr_c, %1":"=r"(old), "=r"(temp)
+			     ::"memory");
+	return (old & 0x80) == 0;
+}
+#else
+void enable_interrupts(void)
+{
+	return;
+}
+int disable_interrupts(void)
+{
+	return 0;
+}
+#endif
+
+void bad_mode(void)
+{
+	panic("Resetting CPU ...\n");
+	reset_cpu(0);
+}
+
+void show_regs(struct pt_regs *regs)
+{
+	unsigned long flags;
+	const char *processor_modes[] = {
+		"USER_26", "FIQ_26", "IRQ_26", "SVC_26",
+		"UK4_26", "UK5_26", "UK6_26", "UK7_26",
+		"UK8_26", "UK9_26", "UK10_26", "UK11_26",
+		"UK12_26", "UK13_26", "UK14_26", "UK15_26",
+		"USER_32", "FIQ_32", "IRQ_32", "SVC_32",
+		"UK4_32", "UK5_32", "UK6_32", "ABT_32",
+		"UK8_32", "UK9_32", "UK10_32", "UND_32",
+		"UK12_32", "UK13_32", "UK14_32", "SYS_32",
+	};
+
+	flags = condition_codes(regs);
+
+	printf("pc : [<%08lx>]    lr : [<%08lx>]\n"
+	       "sp : %08lx  ip : %08lx  fp : %08lx\n",
+	       instruction_pointer(regs),
+	       regs->ARM_lr, regs->ARM_sp, regs->ARM_ip, regs->ARM_fp);
+	printf("r10: %08lx  r9 : %08lx  r8 : %08lx\n",
+	       regs->ARM_r10, regs->ARM_r9, regs->ARM_r8);
+	printf("r7 : %08lx  r6 : %08lx  r5 : %08lx  r4 : %08lx\n",
+	       regs->ARM_r7, regs->ARM_r6, regs->ARM_r5, regs->ARM_r4);
+	printf("r3 : %08lx  r2 : %08lx  r1 : %08lx  r0 : %08lx\n",
+	       regs->ARM_r3, regs->ARM_r2, regs->ARM_r1, regs->ARM_r0);
+	printf("Flags: %c%c%c%c",
+	       flags & CC_N_BIT ? 'N' : 'n',
+	       flags & CC_Z_BIT ? 'Z' : 'z',
+	       flags & CC_C_BIT ? 'C' : 'c', flags & CC_V_BIT ? 'V' : 'v');
+	printf("  IRQs %s  FIQs %s  Mode %s%s\n",
+	       interrupts_enabled(regs) ? "on" : "off",
+	       fast_interrupts_enabled(regs) ? "on" : "off",
+	       processor_modes[processor_mode(regs)],
+	       thumb_mode(regs) ? " (T)" : "");
+}
+
+void do_undefined_instruction(struct pt_regs *pt_regs)
+{
+	printf("undefined instruction\n");
+	show_regs(pt_regs);
+	bad_mode();
+}
+
+void do_software_interrupt(struct pt_regs *pt_regs)
+{
+	printf("software interrupt\n");
+	show_regs(pt_regs);
+	bad_mode();
+}
+
+void do_prefetch_abort(struct pt_regs *pt_regs)
+{
+	printf("prefetch abort\n");
+	show_regs(pt_regs);
+	bad_mode();
+}
+
+void do_data_abort(struct pt_regs *pt_regs)
+{
+	printf("data abort\n");
+	show_regs(pt_regs);
+	bad_mode();
+}
+
+void do_not_used(struct pt_regs *pt_regs)
+{
+	printf("not used\n");
+	show_regs(pt_regs);
+	bad_mode();
+}
+
+void do_fiq(struct pt_regs *pt_regs)
+{
+	printf("fast interrupt request\n");
+	show_regs(pt_regs);
+	bad_mode();
+}
+
+void do_irq(struct pt_regs *pt_regs)
+{
+	printf("interrupt request\n");
+	show_regs(pt_regs);
+	bad_mode();
+}
+
+
+static ulong timestamp;
+static ulong lastinc;
+
+/* nothing really to do with interrupts, just starts up a counter. */
+int interrupt_init(void)
+{
+	int32_t val;
+
+	/* Start the counter ticking up */
+	/* reload value on overflow */
+	*((int32_t *) (CONFIG_SYS_TIMERBASE + TLDR)) = TIMER_LOAD_VAL;
+	/* mask to enable timer */
+	val = (CONFIG_SYS_PVT << 2) | BIT5 | BIT1 | BIT0;
+	*((int32_t *) (CONFIG_SYS_TIMERBASE + TCLR)) = val;	/* start timer */
+
+	reset_timer_masked();	/* init the timestamp and lastinc value */
+
+	return 0;
+}
+
+/*
+ * timer without interrupts
+ */
+void reset_timer(void)
+{
+	reset_timer_masked();
+}
+
+ulong get_timer(ulong base)
+{
+	return get_timer_masked() - base;
+}
+
+void set_timer(ulong t)
+{
+	timestamp = t;
+}
+
+/* delay x useconds AND perserve advance timstamp value */
+void udelay(unsigned long usec)
+{
+	ulong tmo, tmp;
+
+	/* if "big" number, spread normalization to seconds */
+	if (usec >= 1000) {
+		/* if "big" number, spread normalization to seconds */
+		tmo = usec / 1000;
+		/* find number of "ticks" to wait to achieve target */
+		tmo *= CONFIG_SYS_HZ;
+		tmo /= 1000;	/* finish normalize. */
+	} else {/* else small number, don't kill it prior to HZ multiply */
+		tmo = usec * CONFIG_SYS_HZ;
+		tmo /= (1000 * 1000);
+	}
+
+	tmp = get_timer(0);	/* get current timestamp */
+	/* if setting this forward will roll time stamp */
+	if ((tmo + tmp + 1) < tmp)
+		/* reset "advancing" timestamp to 0, set lastinc value */
+		reset_timer_masked();
+	else
+		tmo += tmp;	/* else, set advancing stamp wake up time */
+	while (get_timer_masked() < tmo)	/* loop till event */
+		 /*NOP*/;
+}
+
+void reset_timer_masked(void)
+{
+	/* reset time */
+	lastinc = READ_TIMER;	/* capture current incrementer value time */
+	timestamp = 0;		/* start "advancing" time stamp from 0 */
+}
+
+ulong get_timer_masked(void)
+{
+	ulong now = READ_TIMER;	/* current tick value */
+
+	if (now >= lastinc)	/* normal mode (non roll) */
+		/* move stamp fordward with absoulte diff ticks */
+		timestamp += (now - lastinc);
+	else	/* we have rollover of incrementer */
+		timestamp += (0xFFFFFFFF - lastinc) + now;
+	lastinc = now;
+	return timestamp;
+}
+
+/* waits specified delay value and resets timestamp */
+void udelay_masked(unsigned long usec)
+{
+	ulong tmo;
+	ulong endtime;
+	signed long diff;
+
+	/* if "big" number, spread normalization to seconds */
+	if (usec >= 1000) {
+		/* start to normalize for usec to ticks per sec */
+		tmo = usec / 1000;
+		/* find number of "ticks" to wait to achieve target */
+		tmo *= CONFIG_SYS_HZ;
+		tmo /= 1000;	/* finish normalize. */
+	} else {		/* else small number, */
+				/* don't kill it prior to HZ multiply */
+		tmo = usec * CONFIG_SYS_HZ;
+		tmo /= (1000 * 1000);
+	}
+	endtime = get_timer_masked() + tmo;
+
+	do {
+		ulong now = get_timer_masked();
+		diff = endtime - now;
+	} while (diff >= 0);
+}
+
+/*
+ * This function is derived from PowerPC code (read timebase as long long).
+ * On ARM it just returns the timer value.
+ */
+unsigned long long get_ticks(void)
+{
+	return get_timer(0);
+}
+
+/*
+ * This function is derived from PowerPC code (timebase clock frequency).
+ * On ARM it returns the number of timer ticks per second.
+ */
+ulong get_tbclk(void)
+{
+	ulong tbclk;
+	tbclk = CONFIG_SYS_HZ;
+	return tbclk;
+}
+


More information about the U-Boot mailing list