October 2008 Archives by subject

• Messages sorted by: [ thread ] [ author ] [ date ]
• More info on this list...

Starting: Wed Oct 1 00:00:20 CEST 2008
Ending: Fri Oct 31 23:40:44 CET 2008
Messages: 1691

• [U-Boot] (no subject)   Haiying Wang
• [U-Boot] (no subject)   Haiying Wang
• [U-Boot] (no subject)   Haiying Wang
• [U-Boot] (no subject)   Haiying Wang
• [U-Boot] (no subject)   Haiying Wang
• [U-Boot] (no subject)   Haiying Wang
• [U-Boot] (no subject)   Wolfgang Denk
• [U-Boot] (no subject)   Haiying Wang
• [U-Boot] /chosen node not overwritten by bootm   Jerry Van Baren
• [U-Boot] 4xx warnings on cmd_elf.c   Kumar Gala
• [U-Boot] 4xx warnings on cmd_elf.c   Stefan Roese
• [U-Boot] [83xx] [RFC] Widening the scope of u-boot/cpu/mpc83xx/cpu.c : upmconfig   richardretanubun
• [U-Boot] [83xx] [RFC] Widening the scope of u-boot/cpu/mpc83xx/cpu.c : upmconfig   Kim Phillips
• [U-Boot] [AT91] Questions about AT91 architecture in u-boot   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [cfi-flash] Please pull git://www.denx.de/git/u-boot-cfi-flash.git   Wolfgang Denk
• [U-Boot] [cfi-flash] Please pull git://www.denx.de/git/u-boot-cfi-flash.git   Stefan Roese
• [U-Boot] [cfi-flash] Please pull git://www.denx.de/git/u-boot-cfi-flash.git   Wolfgang Denk
• [U-Boot] [cfi-flash] Please pull git://www.denx.de/git/u-boot-cfi-flash.git   Stefan Roese
• [U-Boot] [OFF TOPIC] Linux Physmap drivers   Alemao
• [U-Boot] [OFF TOPIC] Linux Physmap drivers   Wolfgang Denk
• [U-Boot] [patch 0/1] [Experimental] U-boot linking against libgcc   Remy Bohmer
• [U-Boot] [PATCH 0/2] 85xx: Support for XPedite5200   Peter Tyser
• [U-Boot] [patch 0/2] Some more USB-OHCI bugfixes   Remy Bohmer
• [U-Boot] [patch 0/2] Some more USB-OHCI bugfixes   Markus Klotzbücher
• [U-Boot] [patch 0/2] Some more USB-OHCI bugfixes   Stelian Pop
• [U-Boot] [patch 0/2] Some more USB-OHCI bugfixes   Stelian Pop
• [U-Boot] [patch 0/2] Some more USB-OHCI bugfixes   Remy Bohmer
• [U-Boot] [patch 0/2] Some more USB-OHCI bugfixes   Stelian Pop
• [U-Boot] [patch 0/2] Some more USB-OHCI bugfixes   Remy Bohmer
• [U-Boot] [patch 0/2] Some more USB-OHCI bugfixes   Stelian Pop
• [U-Boot] [patch 0/2] Some more USB-OHCI bugfixes   Remy Bohmer
• [U-Boot] [patch 0/2] Some more USB-OHCI bugfixes [V2]   Remy Bohmer
• [U-Boot] [patch 0/2] Some more USB-OHCI bugfixes [V2]   Markus Klotzbücher
• [U-Boot] [patch 0/2] Some more USB-OHCI bugfixes [V2]   Wolfgang Denk
• [U-Boot] [patch 0/2] Some more USB-OHCI bugfixes [V2]   Markus Klotzbücher
• [U-Boot] [patch 0/3] Improve stability USB memory sticks for the common OHCI USB layer.   Stelian Pop
• [U-Boot] [patch 0/3] Improve stability USB memory sticks for the common OHCI USB layer.   Remy Bohmer
• [U-Boot] [PATCH 0/3] iMX31: Add iMX31 support to boots from NAND   Alan Carvalho de Assis
• [U-Boot] [PATCH 0/3] iMX31: Add iMX31 support to boots from NAND   Alan Carvalho de Assis
• [U-Boot] [PATCH 0/3] Support for XPedite5370 and misc GPIO   Peter Tyser
• [U-Boot] [PATCH 0/4] Convert MPC85xx platforms to a single linker script   Wolfgang Denk
• [U-Boot] [PATCH 0/4] Convert MPC85xx platforms to a single linker script   Wolfgang Denk
• [U-Boot] [PATCH 0/4] Convert MPC85xx platforms to a single linker script   Wolfgang Denk
• [U-Boot] [PATCH 0/4] Convert MPC85xx platforms to a single linker script   Trent Piepho
• [U-Boot] [PATCH 0/4] Convert MPC85xx platforms to a single linker script   Trent Piepho
• [U-Boot] [PATCH 0/4] Convert MPC85xx platforms to a single linker script   Trent Piepho
• [U-Boot] [PATCH 0/4] Convert MPC85xx platforms to a single linker script   Trent Piepho
• [U-Boot] [PATCH 0/6] DDR intereleaving support   Haiying Wang
• [U-Boot] [PATCH 00/10] 85xx/85xx pci cleanup   Kumar Gala
• [U-Boot] [PATCH 00/10] 85xx/85xx pci cleanup   Wolfgang Denk
• [U-Boot] [PATCH 00/10] 85xx/85xx pci cleanup   Kumar Gala
• [U-Boot] [PATCH 00/10] 85xx/85xx pci cleanup   Andy Fleming
• [U-Boot] [PATCH 00/10] Add MMC Framework   Andy Fleming
• [U-Boot] [PATCH 00/10] AVR32: RFC/preview - support for ATEVK1100 evaluation board   Olav Morken
• [U-Boot] [PATCH 00/12 v2] ARM: OMAP3: Add support for some of TIs ARM-Cortex A8 OMAP3 boards   Steve Sakoman
• [U-Boot] [PATCH 00/12 v2] ARM: OMAP3: Add support for some of TIs ARM-Cortex A8 OMAP3 boards   dirk.behme at googlemail.com
• [U-Boot] [PATCH 00/13 v3] ARM: OMAP3: Add support for some of TIs ARM-Cortex A8 OMAP3 boards   dirk.behme at googlemail.com
• [U-Boot] [PATCH 00/13 v4] ARM: OMAP3: Add support for some of TIs ARM-Cortex A8 OMAP3 boards   dirk.behme at googlemail.com
• [U-Boot] [PATCH 01/10] Consolidate MAX/MIN definitions   Andy Fleming
• [U-Boot] [PATCH 01/10] Fix IP alignement problem   Olav Morken
• [U-Boot] [PATCH 01/10] Fix IP alignement problem   Haavard Skinnemoen
• [U-Boot] [PATCH 01/10] Fix IP alignement problem   Ben Warren
• [U-Boot] [PATCH 01/10] Fix IP alignement problem   Olav Morken
• [U-Boot] [PATCH 01/10] Fix IP alignement problem   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 01/10] Fix IP alignement problem   Olav Morken
• [U-Boot] [PATCH 01/10] Fix IP alignement problem   Ben Warren
• [U-Boot] [PATCH 01/10] Fix IP alignement problem   Olav Morken
• [U-Boot] [PATCH 01/10] Fix IP alignement problem   Ben Warren
• [U-Boot] [PATCH 01/10] Fix IP alignement problem   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 01/10] Fix IP alignement problem   Olav Morken
• [U-Boot] [PATCH 01/10] pci: Allow for PCI addresses to be 64-bit   Kumar Gala
• [U-Boot] [PATCH 01/10] pci: Allow for PCI addresses to be 64-bit   Wolfgang Denk
• [U-Boot] [PATCH 01/12 v2] ARM: OMAP3: Add pin mux, clock and cpu headers   dirk.behme at googlemail.com
• [U-Boot] [PATCH 01/13 v3] ARM: OMAP3: Add pin mux, clock and cpu headers   dirk.behme at googlemail.com
• [U-Boot] [PATCH 01/13 v4] ARM: OMAP3: Add pin mux, clock and cpu headers   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 01/13 v4] ARM: OMAP3: Add pin mux, clock and cpu headers   dirk.behme at googlemail.com
• [U-Boot] [PATCH 01/19] ColdFire: Remove linker file   Tsi-Chung Liew
• [U-Boot] [PATCH 01/19] ColdFire: Remove linker file   James Kimble
• [U-Boot] [PATCH 02/10] 85xx: Enable 64-bit PCI resources on all Freescale boards   Kumar Gala
• [U-Boot] [PATCH 02/10] AVR32: atmel_usart - Make sure that all interrupts are disabled during startup   Olav Morken
• [U-Boot] [PATCH 02/10] Eliminate support for using MMC as memory   Andy Fleming
• [U-Boot] [PATCH 02/12 v2] ARM: OMAP3: Add i2c, memory and additional pin mux headers   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 02/12 v2] ARM: OMAP3: Add i2c, memory and additional pin mux headers   dirk.behme at googlemail.com
• [U-Boot] [PATCH 02/13 v3] ARM: OMAP3: Add i2c, memory and additional pin mux headers   dirk.behme at googlemail.com
• [U-Boot] [PATCH 02/13 v4] ARM: OMAP3: Add i2c, memory and additional pin mux headers   dirk.behme at googlemail.com
• [U-Boot] [PATCH 02/19] ColdFire: Modules header files cleanup - 1   Tsi-Chung Liew
• [U-Boot] [PATCH 03/10] 86xx: Enable 64-bit PCI resources on all Freescale boards   Kumar Gala
• [U-Boot] [PATCH 03/10] AVR32: Make cacheflush cpu-dependent   Olav Morken
• [U-Boot] [PATCH 03/10] Convert mmc_init to mmc_legacy_init   Andy Fleming
• [U-Boot] [PATCH 03/12 v2] ARM: OMAP3: Add overo pin mux, omap3 and prototype headers   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 03/12 v2] ARM: OMAP3: Add overo pin mux, omap3 and prototype headers   dirk.behme at googlemail.com
• [U-Boot] [PATCH 03/12 v2] ARM: OMAP3: Add overo pin mux, omap3 and prototype headers   Dirk Behme
• [U-Boot] [PATCH 03/13 v3] ARM: OMAP3: Add overo pin mux, omap3 and prototype headers   dirk.behme at googlemail.com
• [U-Boot] [PATCH 03/13 v4] ARM: OMAP3: Add overo pin mux, omap3 and prototype headers   dirk.behme at googlemail.com
• [U-Boot] [PATCH 03/19] ColdFire: Modules header files cleanup - 2   Tsi-Chung Liew
• [U-Boot] [PATCH 04/10] AVR32: Move addrspace.h to arch-directory, and move some functions from io.h to addrspace.h   Olav Morken
• [U-Boot] [PATCH 04/10] Eliminated arch-specific mmc header requirement   Andy Fleming
• [U-Boot] [PATCH 04/10] fdt: Add fdt_sizecell & fdt_addrcell helpers   Jerry Van Baren
• [U-Boot] [PATCH 04/10] fdt: Add fdt_sizecell & fdt_addrcell helpers   Kumar Gala
• [U-Boot] [PATCH 04/10] fdt: Add fdt_sizecell & fdt_addrcell helpers   Jerry Van Baren
• [U-Boot] [PATCH 04/10] fdt: Add fdt_sizecell & fdt_addrcell helpers   Kumar Gala
• [U-Boot] [PATCH 04/10] fdt: Add fdt_sizecell & fdt_addrcell helpers   Kumar Gala
• [U-Boot] [PATCH 04/11 v1] ARM: OMAP3: Add assembly startup and sys_info common files   Wolfgang Denk
• [U-Boot] [PATCH 04/12 v2] ARM: OMAP3: Add ARM Cortex A8 common directory   dirk.behme at googlemail.com
• [U-Boot] [PATCH 04/13 v3] ARM: OMAP3: Add ARM Cortex A8 common directory   dirk.behme at googlemail.com
• [U-Boot] [PATCH 04/13 v4] ARM: OMAP3: Add ARM Cortex A8 common directory   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 04/13 v4] ARM: OMAP3: Add ARM Cortex A8 common directory   dirk.behme at googlemail.com
• [U-Boot] [PATCH 04/19] ColdFire: Modules header files cleanup - 3   Tsi-Chung Liew
• [U-Boot] [PATCH 05/10] AVR32: macb - Disable 100mbps if clock is slow   Olav Morken
• [U-Boot] [PATCH 05/10] AVR32: macb - Disable 100mbps if clock is slow   Ben Warren
• [U-Boot] [PATCH 05/10] fdt: Added helper to set PCI dma-ranges property   Kumar Gala
• [U-Boot] [PATCH 05/10] Reduce the scope of PXA's mmc_read/mmc_write/mmc_bread functions   Andy Fleming
• [U-Boot] [PATCH 05/12 v2] ARM: OMAP3: Add lowlevel init and sys_info common files   dirk.behme at googlemail.com
• [U-Boot] [PATCH 05/13 v3] ARM: OMAP3: Add lowlevel init and sys_info common files   dirk.behme at googlemail.com
• [U-Boot] [PATCH 05/13 v4] ARM: OMAP3: Add lowlevel init and sys_info common files   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 05/13 v4] ARM: OMAP3: Add lowlevel init and sys_info common files   dirk.behme at googlemail.com
• [U-Boot] [PATCH 05/19] ColdFire: Modules header files cleanup - 4   Tsi-Chung Liew
• [U-Boot] [PATCH 06/10] Add MMC Framework   Andy Fleming
• [U-Boot] [PATCH 06/10] AVR32: macb - Search for PHY id   Olav Morken
• [U-Boot] [PATCH 06/10] AVR32: macb - Search for PHY id   Ben Warren
• [U-Boot] [PATCH 06/10] pci/fsl_pci_init: Enable larger address and setting inbound windows properly   Kumar Gala
• [U-Boot] [PATCH 06/12 v2] ARM: OMAP3: Add board, clock and interrupts common files   dirk.behme at googlemail.com
• [U-Boot] [PATCH 06/13 v3] ARM: OMAP3: Add board, clock and interrupts common files   dirk.behme at googlemail.com
• [U-Boot] [PATCH 06/13 v4] ARM: OMAP3: Add board, clock and interrupts common files   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 06/13 v4] ARM: OMAP3: Add board, clock and interrupts common files   dirk.behme at googlemail.com
• [U-Boot] [PATCH 06/19] ColdFire: Modules header files cleanup - 5   Tsi-Chung Liew
• [U-Boot] [PATCH 07/10] Add support for the Freescale eSDHC found on 8379 and 8536 SoCs   Andy Fleming
• [U-Boot] [PATCH 07/10] AVR32: Disable relocation of command table when on AT32UC3A for now   Olav Morken
• [U-Boot] [PATCH 07/10] pci/fsl_pci_init: Add a common PCI inbound setup function   Kumar Gala
• [U-Boot] [PATCH 07/12 v2] ARM: OMAP3: Add memory and syslib common files, add NAND support   Scott Wood
• [U-Boot] [PATCH 07/12 v2] ARM: OMAP3: Add memory and syslib common files, add NAND support   Scott Wood
• [U-Boot] [PATCH 07/12 v2] ARM: OMAP3: Add memory and syslib common files, add NAND support   Menon, Nishanth
• [U-Boot] [PATCH 07/12 v2] ARM: OMAP3: Add memory and syslib common files, add NAND support   Scott Wood
• [U-Boot] [PATCH 07/12 v2] ARM: OMAP3: Add memory and syslib common files, add NAND support   Scott Wood
• [U-Boot] [PATCH 07/12 v2] ARM: OMAP3: Add memory and syslib common files, add NAND support   Dirk Behme
• [U-Boot] [PATCH 07/12 v2] ARM: OMAP3: Add memory and syslib common files, add NAND support   Dirk Behme
• [U-Boot] [PATCH 07/12 v2] ARM: OMAP3: Add memory and syslib common files, add NAND support   Scott Wood
• [U-Boot] [PATCH 07/12 v2] ARM: OMAP3: Add memory and syslib common files, add NAND support   Dirk Behme
• [U-Boot] [PATCH 07/12 v2] ARM: OMAP3: Add memory and syslib common files, add NAND support   dirk.behme at googlemail.com
• [U-Boot] [PATCH 07/12 v2] ARM: OMAP3: Add memory and syslib common files, add NAND support   Dirk Behme
• [U-Boot] [PATCH 07/12 v2] ARM: OMAP3: Add memory and syslib common files, add NAND support   Dirk Behme
• [U-Boot] [PATCH 07/12 v2] ARM: OMAP3: Add memory and syslib common files, add NAND support   Nishanth Menon
• [U-Boot] [PATCH 07/13 v3] ARM: OMAP3: Add memory and syslib common files   dirk.behme at googlemail.com
• [U-Boot] [PATCH 07/13 v4] ARM: OMAP3: Add memory and syslib common files   dirk.behme at googlemail.com
• [U-Boot] [PATCH 07/19] ColdFire: Modules header files cleanup - 6   Tsi-Chung Liew
• [U-Boot] [PATCH 08/10] 83xx: Add eSDHC support on 8379 EMDS board   Andy Fleming
• [U-Boot] [PATCH 08/10] AVR32: Must add NOPs after disabling interrupts for AT32UC3A0512ES   Olav Morken
• [U-Boot] [PATCH 08/10] pci/fsl_pci_init: Added fdt helper for setting up bus-ranges & dma-ranges   Kumar Gala
• [U-Boot] [PATCH 08/12 v2] ARM: OMAP3: Add MMC support   dirk.behme at googlemail.com
• [U-Boot] [PATCH 08/13 v3] ARM: OMAP3: Add NAND support   dirk.behme at googlemail.com
• [U-Boot] [PATCH 08/13 v3] ARM: OMAP3: Add NAND support   Scott Wood
• [U-Boot] [PATCH 08/13 v3] ARM: OMAP3: Add NAND support   Dirk Behme
• [U-Boot] [PATCH 08/13 v3] ARM: OMAP3: Add NAND support   Wolfgang Denk
• [U-Boot] [PATCH 08/13 v3] ARM: OMAP3: Add NAND support   Dirk Behme
• [U-Boot] [PATCH 08/13 v3] ARM: OMAP3: Add NAND support   Scott Wood
• [U-Boot] [PATCH 08/13 v3] ARM: OMAP3: Add NAND support   Dirk Behme
• [U-Boot] [PATCH 08/13 v3] ARM: OMAP3: Add NAND support   Scott Wood
• [U-Boot] [PATCH 08/13 v4] ARM: OMAP3: Add NAND support   dirk.behme at googlemail.com
• [U-Boot] [PATCH 08/13 v4] ARM: OMAP3: Add NAND support   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 08/13 v4] ARM: OMAP3: Add NAND support   Scott Wood
• [U-Boot] [PATCH 08/13 v4] ARM: OMAP3: Add NAND support   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 08/13 v4] ARM: OMAP3: Add NAND support   Scott Wood
• [U-Boot] [PATCH 08/19] ColdFire: Remove platforms mii.c file - 1   Tsi-Chung Liew
• [U-Boot] [PATCH 08/19] ColdFire: Remove platforms mii.c file - 1   Wolfgang Denk
• [U-Boot] [PATCH 08/19] ColdFire: Remove platforms mii.c file - 1   Liew Tsi Chung
• [U-Boot] [PATCH 09/10] 85xx: Add eSDHC support for 8536 DS   Andy Fleming
• [U-Boot] [PATCH 09/10] 85xx: Convert all fsl_pci_init users to new APIs   Kumar Gala
• [U-Boot] [PATCH 09/10] AVR32: CPU support for AT32UC3A0xxx CPUs   Olav Morken
• [U-Boot] [PATCH 09/10] AVR32: CPU support for AT32UC3A0xxx CPUs   Ben Warren
• [U-Boot] [PATCH 09/10] AVR32: CPU support for AT32UC3A0xxx CPUs   Wolfgang Denk
• [U-Boot] [PATCH 09/10] AVR32: CPU support for AT32UC3A0xxx CPUs   Ben Warren
• [U-Boot] [PATCH 09/10] AVR32: CPU support for AT32UC3A0xxx CPUs   Haavard Skinnemoen
• [U-Boot] [PATCH 09/10] AVR32: CPU support for AT32UC3A0xxx CPUs   Ben Warren
• [U-Boot] [PATCH 09/10] AVR32: CPU support for AT32UC3A0xxx CPUs   Haavard Skinnemoen
• [U-Boot] [PATCH 09/10] AVR32: CPU support for AT32UC3A0xxx CPUs   Ben Warren
• [U-Boot] [PATCH 09/12 v2] ARM: OMAP3: Add I2C support   dirk.behme at googlemail.com
• [U-Boot] [PATCH 09/13 v3] ARM: OMAP3: Add MMC support   dirk.behme at googlemail.com
• [U-Boot] [PATCH 09/13 v4] ARM: OMAP3: Add MMC support   dirk.behme at googlemail.com
• [U-Boot] [PATCH 09/19] ColdFire: Remove platforms mii.c file - 2   Tsi-Chung Liew
• [U-Boot] [PATCH 1/1 v2] ppc4xx: Reset and relock memory DLL after SDRAM_CLKTR change   Stefan Roese
• [U-Boot] [PATCH 1/1 v2] ppc4xx: Reset and relock memory DLL after SDRAM_CLKTR change   Stefan Roese
• [U-Boot] [PATCH 1/1 v2] ppc4xx: Reset and relock memory DLL after SDRAM_CLKTR change   Victor Gallardo
• [U-Boot] [PATCH 1/1 v2] ppc4xx: Reset and relock memory DLL after SDRAM_CLKTR change   Victor Gallardo
• [U-Boot] [PATCH 1/1 v2] ppc4xx: Reset and relock memory DLL after SDRAM_CLKTR change   Adam Graham
• [U-Boot] [PATCH 1/1 V3] Add support for LZMA uncompression algorithm.   Wolfgang Denk
• [U-Boot] [PATCH 1/1] add tool to check patch and file for CFG_ presence   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 1/1] add tool to check patch and file for CFG_ presence   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 1/1] add tool to check patch and file for CFG_ presence   Wolfgang Denk
• [U-Boot] [PATCH 1/1] add tool to check patch and file for CFG_ presence   Wolfgang Denk
• [U-Boot] [PATCH 1/1] add tool to check patch and file for CFG_ presence   Mike Frysinger
• [U-Boot] [PATCH 1/1] common/Makefile: create others group for non core, environment and command files   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 1/1] FPGA: move fpga drivers to drivers/fpga   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 1/1] ppc4xx: Reset and relock memory DLL after SDRAM_CLKTR change   Adam Graham
• [U-Boot] [PATCH 1/1] ppc4xx: Reset and relock memory DLL after SDRAM_CLKTR change   Wolfgang Denk
• [U-Boot] [PATCH 1/1] ppc4xx: Reset and relock memory DLL after SDRAM_CLKTR change   Stefan Roese
• [U-Boot] [patch 1/1] Remove linking to libgcc while compiling U-boot   Remy Bohmer
• [U-Boot] [patch 1/2 V2] fix USB initialisation procedure   Remy Bohmer
• [U-Boot] [PATCH 1/2 V2] IOMUX: Add console multiplexing support.   Gary Jennejohn
• [U-Boot] [PATCH 1/2 V2] IOMUX: Add console multiplexing support.   Wolfgang Denk
• [U-Boot] [PATCH 1/2 V2] IOMUX: Add console multiplexing support.   Gary Jennejohn
• [U-Boot] [PATCH 1/2 V2] IOMUX: Add console multiplexing support.   Wolfgang Denk
• [U-Boot] [PATCH 1/2 v2] pci/fsl_pci_init: Enable inbound PCI config cycles   Peter Tyser
• [U-Boot] [PATCH 1/2] 85xx: Add PORDEVSR_PCI1 define   Peter Tyser
• [U-Boot] [PATCH 1/2] 85xx: remove the unused ddr_enable_ecc in the board file   Andy Fleming
• [U-Boot] [PATCH 1/2] 85xx: remove the unused ddr_enable_ecc in the board file   Dave Liu
• [U-Boot] [PATCH 1/2] 85xx: Use CONFIG_SYS_CACHELINE_SIZE instead of magic number   Andy Fleming
• [U-Boot] [PATCH 1/2] 85xx: Use CONFIG_SYS_CACHELINE_SIZE instead of magic number   Kumar Gala
• [U-Boot] [PATCH 1/2] bootm: Add subcommands   Kumar Gala
• [U-Boot] [PATCH 1/2] bootm: Add subcommands   Wolfgang Denk
• [U-Boot] [PATCH 1/2] bootm: Add subcommands   Jerry Van Baren
• [U-Boot] [PATCH 1/2] bootm: Add subcommands   Wolfgang Denk
• [U-Boot] [PATCH 1/2] bootm: Add subcommands   Jerry Van Baren
• [U-Boot] [PATCH 1/2] bootm: Add subcommands   Wolfgang Denk
• [U-Boot] [PATCH 1/2] bootm: Add subcommands   Jerry Van Baren
• [U-Boot] [PATCH 1/2] bootm: Add subcommands   Kumar Gala
• [U-Boot] [PATCH 1/2] bootm: Add subcommands   Kumar Gala
• [U-Boot] [PATCH 1/2] bootm: Add subcommands   Jerry Van Baren
• [U-Boot] [PATCH 1/2] bootm: Add subcommands   Jerry Van Baren
• [U-Boot] [PATCH 1/2] Fix the incorrect DDR clk freq reporting on 8536DS   Andy Fleming
• [U-Boot] [patch 1/2] fix USB initialisation procedure   Remy Bohmer
• [U-Boot] [patch 1/2] fix USB initialisation procedure   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [patch 1/2] fix USB initialisation procedure   Wolfgang Denk
• [U-Boot] [patch 1/2] fix USB initialisation procedure   Markus Klotzbücher
• [U-Boot] [patch 1/2] fix USB initialisation procedure   Stefan Roese
• [U-Boot] [patch 1/2] fix USB initialisation procedure   Markus Klotzbücher
• [U-Boot] [patch 1/2] fix USB initialisation procedure   Jerry Van Baren
• [U-Boot] [patch 1/2] fix USB initialisation procedure   Wolfgang Denk
• [U-Boot] [patch 1/2] fix USB initialisation procedure   Wolfgang Denk
• [U-Boot] [patch 1/2] fix USB initialisation procedure   Markus Klotzbücher
• [U-Boot] [patch 1/2] fix USB initialisation procedure   Remy Bohmer
• [U-Boot] [PATCH 1/2] i.MX31: Use do_div for some calculations.   Magnus Lilja
• [U-Boot] [PATCH 1/2] IOMUX: Add console multiplexing support.   Wolfgang Denk
• [U-Boot] [PATCH 1/2] IOMUX: Add console multiplexing support.   Gary Jennejohn
• [U-Boot] [PATCH 1/2] IOMUX: Add console multiplexing support.   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 1/2] libfdt: Fix bugs in fdt_get_path()   Jerry Van Baren
• [U-Boot] [PATCH 1/2] Make mpc8572ds, mpc8544ds, mpc8536ds relocatable   Ed Swarthout
• [U-Boot] [PATCH 1/2] Moved IXP4XX_NPE driver to drivers/net   Ben Warren
• [U-Boot] [PATCH 1/2] Moved IXP4XX_NPE driver to drivers/net   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 1/2] Moved IXP4XX_NPE driver to drivers/net   Ben Warren
• [U-Boot] [PATCH 1/2] Moved IXP4XX_NPE driver to drivers/net   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 1/2] NAND: Fix CONFIG_ENV_ADDR for MPC8572DS   Kumar Gala
• [U-Boot] [PATCH 1/2] NAND: Fix CONFIG_ENV_ADDR for MPC8572DS   Scott Wood
• [U-Boot] [PATCH 1/2] rename CFG_ macros to CONFIG_SYS   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 1/2][for v2008.10] Revert "85xx: Using proper I2C source clock divider for MPC8544"   Wolfgang Denk
• [U-Boot] [PATCH 1/2][for v2008.10] Revert "85xx: Using proper I2C source clock divider for MPC8544"   Kumar Gala
• [U-Boot] [PATCH 1/3 v2] ppc4xx: Add AMCC Arches boardsupport(dual 460GT)   Victor Gallardo
• [U-Boot] [PATCH 1/3 v2] ppc4xx: Add AMCC Arches boardsupport(dual 460GT)   Wolfgang Denk
• [U-Boot] [PATCH 1/3 v2] ppc4xx: Add AMCC Arches boardsupport(dual 460GT)   Victor Gallardo
• [U-Boot] [PATCH 1/3 v2] ppc4xx: Add AMCC Arches board support(dual 460GT)   Victor Gallardo
• [U-Boot] [PATCH 1/3 v2] ppc4xx: Add AMCC Arches board support (dual 460GT)   Wolfgang Denk
• [U-Boot] [PATCH 1/3 v2] ppc4xx: Add AMCC Arches board support (dual 460GT)   Adam Graham
• [U-Boot] [PATCH 1/3 v3] ppc4xx: Add AMCC Arches board support (dual 460GT)   Wolfgang Denk
• [U-Boot] [PATCH 1/3 v3] ppc4xx: Add AMCC Arches board support (dual 460GT)   Adam Graham
• [U-Boot] [PATCH 1/3 v4] ppc4xx: Add AMCC Arches board support (dual 460GT)   Adam Graham
• [U-Boot] [PATCH 1/3 v4] ppc4xx: Add AMCC Arches board support (dual 460GT)   Adam Graham
• [U-Boot] [PATCH 1/3 v5] ppc4xx: Add AMCC Arches board support (dual 460GT)   Stefan Roese
• [U-Boot] [PATCH 1/3 v5] ppc4xx: Add AMCC Arches board support (dual 460GT)   Adam Graham
• [U-Boot] [PATCH 1/3] Add support for PCA953x I2C gpio devices   Peter Tyser
• [U-Boot] [PATCH 1/3] ADS5121: add LPC clock support   Wolfgang Denk
• [U-Boot] [PATCH 1/3] Changed PPC4xx EMAC driver to require CONFIG_PPC4xx_EMAC   Ben Warren
• [U-Boot] [PATCH 1/3] Changed PPC4xx EMAC driver to require CONFIG_PPC4xx_EMAC   Stefan Roese
• [U-Boot] [PATCH 1/3] iMX31: Reducing start.S size to let boot from NAND   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 1/3] iMX31: Reducing start.S size to let boot from NAND   Wolfgang Denk
• [U-Boot] [PATCH 1/3] iMX31: Reducing start.S size to let boot from NAND   Alan Carvalho de Assis
• [U-Boot] [PATCH 1/3] iMX31: Reducing start.S size to let boot from NAND   Alan Carvalho de Assis
• [U-Boot] [PATCH 1/3] iMX31: Reducing start.S size to let boot from NAND   Alan Carvalho de Assis
• [U-Boot] [PATCH 1/3] Minor fixes for I2C address on MPC8572DS   Haiying Wang
• [U-Boot] [PATCH 1/3] Minor fixes for I2C address on MPC8572DS   Wolfgang Denk
• [U-Boot] [PATCH 1/3] Minor fixes for I2C address on MPC8572DS   Haiying Wang
• [U-Boot] [PATCH 1/3] Minor fixes for I2C address on MPC8572DS   Andy Fleming
• [U-Boot] [PATCH 1/3] strmhz(): Round numbers when printing clock frequencies   Wolfgang Denk
• [U-Boot] [PATCH 1/3] strmhz(): Round numbers when printing clock frequencies   Wolfgang Denk
• [U-Boot] [PATCH 1/4] bootm: Move to using a function pointer table for the boot os function   Wolfgang Denk
• [U-Boot] [PATCH 1/4] bootm: Move to using a function pointer table for the boot os function   Kumar Gala
• [U-Boot] [PATCH 1/4] Fix the NAND size overflow issue.   Wolfgang Denk
• [U-Boot] [PATCH 1/4] Make Freescale local bus registers available for both 83xx and 85xx.   Scott Wood
• [U-Boot] [PATCH 1/4] Make pixis_set_sgmii more general to support MPC85xx boards.   Andy Fleming
• [U-Boot] [PATCH 1/4] Make pixis_set_sgmii more general to support MPC85xx boards.   Jason Jin
• [U-Boot] [PATCH 1/4] mpc83xx: fix serdes setup for the MPC8378E boards   Anton Vorontsov
• [U-Boot] [PATCH 1/4] New Board support: Makefile MAKEALL, etc   Ron Madrid
• [U-Boot] [PATCH 1/4] New Board support: Makefile MAKEALL, etc   Kim Phillips
• [U-Boot] [PATCH 1/4] New Board support: Makefile MAKEALL, etc   Ron Madrid
• [U-Boot] [PATCH 1/4] New Board support: Makefile MAKEALL, etc   Kim Phillips
• [U-Boot] [PATCH 1/4] New Board support: Makefile MAKEALL, etc   Ron Madrid
• [U-Boot] [PATCH 1/4] New Board support: Makefile MAKEALL, etc   Wolfgang Denk
• [U-Boot] [PATCH 1/4] ppc4xx: Update DU440 config   matthias.fuchs at esd-electronics.com
• [U-Boot] [PATCH 1/4] ppc4xx: Update DU440 config   Stefan Roese
• [U-Boot] [PATCH 1/4] Use absolute addressing for mpc85xx boot page   Wolfgang Denk
• [U-Boot] [PATCH 1/4] Use absolute addressing for mpc85xx boot page   Wolfgang Denk
• [U-Boot] [PATCH 1/4] Use absolute addressing for mpc85xx boot page   Trent Piepho
• [U-Boot] [PATCH 1/4] Use absolute addressing for mpc85xx boot page   Trent Piepho
• [U-Boot] [PATCH 1/4] Use absolute addressing for mpc85xx boot page   Trent Piepho
• [U-Boot] [PATCH 1/5] 86xx: Move the clear_tlbs before MMU turn on   Becky Bruce
• [U-Boot] [PATCH 1/5] 86xx: Move the clear_tlbs before MMU turn on   Jon Loeliger
• [U-Boot] [PATCH 1/5] 86xx: Move the clear_tlbs before MMU turn on   Dave Liu
• [U-Boot] [PATCH 1/5] atmel_lcdfb: Eliminate unneeded #include <asm/arch/hardware.h>   Anatolij Gustschin
• [U-Boot] [PATCH 1/6] Make DDR interleaving mode work correctly   Haiying Wang
• [U-Boot] [PATCH 1/6] Make DDR interleaving mode work correctly   Andy Fleming
• [U-Boot] [PATCH 1/6] Make DDR interleaving mode work correctly   Jon Loeliger
• [U-Boot] [PATCH 1/6] Make DDR interleaving mode work correctly   Kumar Gala
• [U-Boot] [PATCH 1/6] Make DDR interleaving mode work correctly   Kim Phillips
• [U-Boot] [PATCH 1/6] Make DDR interleaving mode work correctly   Andy Fleming
• [U-Boot] [PATCH 1/6] ppc4xx: Handle other board variant in PMC440 FPGA code   Stefan Roese
• [U-Boot] [PATCH 1/6] ppc4xx: Handle other board variant in PMC440 FPGA code   Matthias Fuchs
• [U-Boot] [PATCH 1/6] ppc4xx: Handle other board variant in PMC440 FPGA code   Stefan Roese
• [U-Boot] [PATCH 1/6] ppc4xx: Handle other board variant in PMC440 FPGA code   matthias.fuchs at esd-electronics.com
• [U-Boot] [PATCH 1/7] sh: ap325rxa: Moved ap325rxa board to board/renesas   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 1/7] sh: ap325rxa: Moveed ap325rxa board in board/renesas   Peter Tyser
• [U-Boot] [PATCH 1/7] sh: ap325rxa: Moveed ap325rxa board in board/renesas   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 1/7] sh: ap325rxa: Moveed ap325rxa board in board/renesas   Ben Warren
• [U-Boot] [PATCH 1/7] sh: ap325rxa: Moveed ap325rxa board in board/renesas   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 1/7] sh: ap325rxa: Moveed ap325rxa board in board/renesas   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 10/10] 86xx: Convert all fsl_pci_init users to new APIs   Jon Loeliger
• [U-Boot] [PATCH 10/10] 86xx: Convert all fsl_pci_init users to new APIs   Kumar Gala
• [U-Boot] [PATCH 10/10] AVR32: Board support for ATEVK1100   Olav Morken
• [U-Boot] [PATCH 10/10] fs: make the static array to dynamic allocation   Andy Fleming
• [U-Boot] [PATCH 10/12 v2] ARM: OMAP3: Add BeagleBoard   dirk.behme at googlemail.com
• [U-Boot] [PATCH 10/13 v3] ARM: OMAP3: Add I2C support   dirk.behme at googlemail.com
• [U-Boot] [PATCH 10/13 v4] ARM: OMAP3: Add I2C support   dirk.behme at googlemail.com
• [U-Boot] [PATCH 10/13 v4] ARM: OMAP3: Add I2C support   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 10/19] ColdFire: Remove platforms mii.c file - 3   Tsi-Chung Liew
• [U-Boot] [PATCH 11/12 v2] ARM: OMAP3: Add EVM board   dirk.behme at googlemail.com
• [U-Boot] [PATCH 11/13 v3] ARM: OMAP3: Add BeagleBoard   dirk.behme at googlemail.com
• [U-Boot] [PATCH 11/13 v4] ARM: OMAP3: Add BeagleBoard   dirk.behme at googlemail.com
• [U-Boot] [PATCH 11/13 v4] ARM: OMAP3: Add BeagleBoard   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 11/19] ColdFire: Remove platforms mii.c file - 4   Tsi-Chung Liew
• [U-Boot] [PATCH 12/12 v2] ARM: OMAP3: Add Overo board   dirk.behme at googlemail.com
• [U-Boot] [PATCH 12/13 v3] ARM: OMAP3: Add EVM board   dirk.behme at googlemail.com
• [U-Boot] [PATCH 12/13 v4] ARM: OMAP3: Add EVM board   dirk.behme at googlemail.com
• [U-Boot] [PATCH 12/19] ColdFire: Relocate FEC's GPIO and mii functions protocols   Tsi-Chung Liew
• [U-Boot] [PATCH 13/13 v3] ARM: OMAP3: Add Overo board   dirk.behme at googlemail.com
• [U-Boot] [PATCH 13/13 v4] ARM: OMAP3: Add Overo board   dirk.behme at googlemail.com
• [U-Boot] [PATCH 13/19] ColdFire: Add mii driver in drivers/net   Tsi-Chung Liew
• [U-Boot] [PATCH 14/19] ColdFire: Use CFI driver for M5272C3   Tsi-Chung Liew
• [U-Boot] [PATCH 15/19] ColdFire: Add SBF support for M52277EVB   Tsi-Chung Liew
• [U-Boot] [PATCH 16/19] ColdFire: Add MCF5301x CPU support   Tsi-Chung Liew
• [U-Boot] [PATCH 17/19] ColdFire: Add MCF5301x CPU header files   Tsi-Chung Liew
• [U-Boot] [PATCH 18/19] ColdFire: Add M53017EVB Platform   Tsi-Chung Liew
• [U-Boot] [PATCH 19/19] ColdFire: Fix compilation error   Tsi-Chung Liew
• [U-Boot] [PATCH 19/24] FSL DDR: Convert STXSSA to new DDR code.   Wolfgang Denk
• [U-Boot] [PATCH 19/24] FSL DDR: Convert STXSSA to new DDR code.   Kumar Gala
• [U-Boot] [PATCH 2/2 v2] 85xx: Enable inbound PCI config cycles for X-ES boards   Peter Tyser
• [U-Boot] [PATCH 2/2 V2] IOMUX: Add console multiplexing support.   Gary Jennejohn
• [U-Boot] [PATCH 2/2 V2] IOMUX: Add console multiplexing support.   Wolfgang Denk
• [U-Boot] [PATCH 2/2 V2] IOMUX: Add console multiplexing support.   Gary Jennejohn
• [U-Boot] [PATCH 2/2 V2] IOMUX: Add console multiplexing support.   Gary Jennejohn
• [U-Boot] [PATCH 2/2 V2] IOMUX: Add console multiplexing support.   Wolfgang Denk
• [U-Boot] [PATCH 2/2 V2] IOMUX: Add console multiplexing support.   Wolfgang Denk
• [U-Boot] [PATCH 2/2 V2] IOMUX: Add console multiplexing support.   Ben Warren
• [U-Boot] [PATCH 2/2 V2] IOMUX: Add console multiplexing support.   Gary Jennejohn
• [U-Boot] [PATCH 2/2 V2] IOMUX: Add console multiplexing support.   Wolfgang Denk
• [U-Boot] [PATCH 2/2 V2] IOMUX: Add console multiplexing support.   Gary Jennejohn
• [U-Boot] [PATCH 2/2] 85xx: Add basic e500mc core support   Kumar Gala
• [U-Boot] [PATCH 2/2] 85xx: the DDR tlb is missed for the !CONFIG_SPD_EEPROM case   Dave Liu
• [U-Boot] [PATCH 2/2] 85xx: the DDR tlb is missed for the !CONFIG_SPD_EEPROM case   Andy Fleming
• [U-Boot] [PATCH 2/2] add tool to check patch and file for CFG_ presence   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 2/2] add tool to check patch and file for CFG_ presence   Wolfgang Denk
• [U-Boot] [PATCH 2/2] bootm: support subcommands in linux ppc bootm   Kumar Gala
• [U-Boot] [PATCH 2/2] Do not init SATA when disabled.   Andy Fleming
• [U-Boot] [PATCH 2/2] Do not init SATA when disabled.   Kumar Gala
• [U-Boot] [PATCH 2/2] i.MX31: Add basic support for Freescale's i.MX31 PDK board.   Magnus Lilja
• [U-Boot] [PATCH 2/2] Leave x86emu op code tables in default section   Jin Zhengxiong-R64188
• [U-Boot] [PATCH 2/2] Leave x86emu op code tables in default section   Ed Swarthout
• [U-Boot] [PATCH 2/2] Moved initialization of IXP4XX_NPE Ethernet controller to cpu_eth_init()   Ben Warren
• [U-Boot] [PATCH 2/2] Moved initialization of IXP4XX_NPE Ethernet controller to cpu_eth_init()   Ben Warren
• [U-Boot] [PATCH 2/2] NAND: Add NAND support for MPC8536DS board   Kumar Gala
• [U-Boot] [patch 2/2] The PIPE_INTERRUPT flag is used wrong   Remy Bohmer
• [U-Boot] [patch 2/2] The PIPE_INTERRUPT flag is used wrong   Remy Bohmer
• [U-Boot] [PATCH 2/2] XPedite5200 board support   Peter Tyser
• [U-Boot] [PATCH 2/2][for v2008.10] 85xx: Using proper I2C source clock divider for MPC8544   Wolfgang Denk
• [U-Boot] [PATCH 2/2][for v2008.10] 85xx: Using proper I2C source clock divider for MPC8544   Timur Tabi
• [U-Boot] [PATCH 2/2][for v2008.10] 85xx: Using proper I2C source clock divider for MPC8544   Kumar Gala
• [U-Boot] [PATCH 2/2][for v2008.10] 85xx: Using proper I2C source clock divider for MPC8544   Wolfgang Denk
• [U-Boot] [PATCH 2/2][for v2008.10] 85xx: Using proper I2C source clock divider for MPC8544   Kumar Gala
• [U-Boot] [PATCH 2/2][for v2008.10] 85xx: Using proper I2C source clock divider for MPC8544   Kumar Gala
• [U-Boot] [PATCH 2/2][for v2008.10] 85xx: Using proper I2C source clock divider for MPC8544   Wolfgang Grandegger
• [U-Boot] [PATCH 2/2][for v2008.10] 85xx: Using proper I2C source clock divider for MPC8544   Timur Tabi
• [U-Boot] [PATCH 2/2][for v2008.10] 85xx: Using proper I2C source clock divider for MPC8544   Jerry Van Baren
• [U-Boot] [PATCH 2/3 v2] ppc4xx: Add static support for 44x IBM SDRAM Controller   Adam Graham
• [U-Boot] [PATCH 2/3 v2] ppc4xx: Add static support for 44x IBM SDRAM Controller   Wolfgang Denk
• [U-Boot] [PATCH 2/3 v2] ppc4xx: Add static support for 44x IBM SDRAM Controller   Jerry Van Baren
• [U-Boot] [PATCH 2/3 v3] ppc4xx: Add static support for 44x IBM SDRAM Controller   Adam Graham
• [U-Boot] [PATCH 2/3 v4] ppc4xx: Add static support for 44x IBM SDRAM Controller   Adam Graham
• [U-Boot] [PATCH 2/3 v5] ppc4xx: Add static support for 44x IBM SDRAM Controller   Adam Graham
• [U-Boot] [PATCH 2/3 v5] ppc4xx: Add static support for 44x IBM SDRAM Controller   Adam Graham
• [U-Boot] [PATCH 2/3] Add ID EEPROM support for MPC8572DS   Haiying Wang
• [U-Boot] [PATCH 2/3] Add support for Maxim's DS4510 I2C device   Peter Tyser
• [U-Boot] [PATCH 2/3] Fix an overflow case in fdt_offset_ptr() detected by GCC 4.3.   Jerry Van Baren
• [U-Boot] [PATCH 2/3] iMX31: Add support to copy NAND Flash code to RAM   Alan Carvalho de Assis
• [U-Boot] [PATCH 2/3] iMX31: Add support to copy NAND Flash code to RAM   Alan Carvalho de Assis
• [U-Boot] [PATCH 2/3] iMX31: Add support to copy NAND Flash code to RAM   Wolfgang Denk
• [U-Boot] [PATCH 2/3] iMX31: Add support to copy NAND Flash code to RAM   Magnus Lilja
• [U-Boot] [PATCH 2/3] iMX31: Add support to copy NAND Flash code to RAM   Alan Carvalho de Assis
• [U-Boot] [PATCH 2/3] iMX31: Add support to copy NAND Flash code to RAM   Wolfgang Denk
• [U-Boot] [PATCH 2/3] iMX31: Add support to copy NAND Flash code to RAM   Scott Wood
• [U-Boot] [PATCH 2/3] iMX31: Add support to copy NAND Flash code to RAM   Alan Carvalho de Assis
• [U-Boot] [PATCH 2/3] iMX31: Add support to copy NAND Flash code to RAM   Scott Wood
• [U-Boot] [PATCH 2/3] iMX31: Add support to copy NAND Flash code to RAM   Alan Carvalho de Assis
• [U-Boot] [PATCH 2/3] iMX31: Add support to copy NAND Flash code to RAM   Guennadi Liakhovetski
• [U-Boot] [PATCH 2/3] iMX31: Add support to copy NAND Flash code to RAM   Guennadi Liakhovetski
• [U-Boot] [PATCH 2/3] iMX31: Add support to copy NAND Flash code to RAM   Guennadi Liakhovetski
• [U-Boot] [PATCH 2/3] Moved PPC4xx EMAC driver to drivers/net   Ben Warren
• [U-Boot] [PATCH 2/3] Use strmhz() to format clock frequencies   Wolfgang Denk
• [U-Boot] [PATCH 2/3] Use strmhz() to format clock frequencies   Wolfgang Denk
• [U-Boot] [PATCH 2/4] bootm: Add subcommands   Kumar Gala
• [U-Boot] [PATCH 2/4] bootm: Add subcommands   Wolfgang Denk
• [U-Boot] [PATCH 2/4] Enabled the Freescale SGMII riser card on 8572DS   Jason Jin
• [U-Boot] [PATCH 2/4] Enabled the Freescale SGMII riser card on 8572DS   Andy Fleming
• [U-Boot] [PATCH 2/4] Make the fsl_elbc_nand driver work for both 83xxand 85xx   Anton Vorontsov
• [U-Boot] [PATCH 2/4] Make the fsl_elbc_nand driver work for both 83xx and 85xx   Scott Wood
• [U-Boot] [PATCH 2/4] Make the fsl_elbc_nand driver work for both 83xxand 85xx   Jin Zhengxiong-R64188
• [U-Boot] [PATCH 2/4] Merge all mpc85xx platforms to use a single ld script   Wolfgang Denk
• [U-Boot] [PATCH 2/4] Merge all mpc85xx platforms to use a single ld script   Wolfgang Denk
• [U-Boot] [PATCH 2/4] Merge all mpc85xx platforms to use a single ld script   Trent Piepho
• [U-Boot] [PATCH 2/4] Merge all mpc85xx platforms to use a single ld script   Trent Piepho
• [U-Boot] [PATCH 2/4] Merge all mpc85xx platforms to use a single ld script   Trent Piepho
• [U-Boot] [PATCH 2/4] Merge all mpc85xx platforms to use a single ld script   Trent Piepho
• [U-Boot] [PATCH 2/4] mpc83xx: serdes: add forgotten shifts for rfcks   Anton Vorontsov
• [U-Boot] [PATCH 2/4] NAND: Add support for MPC8572DS board   Scott Wood
• [U-Boot] [PATCH 2/4] New board support: README and board config file   Ron Madrid
• [U-Boot] [PATCH 2/4] New board support: README and board config file   Kim Phillips
• [U-Boot] [PATCH 2/4] ppc4xx: Fix DU440 GPIO configuration   matthias.fuchs at esd-electronics.com
• [U-Boot] [PATCH 2/4] ppc4xx: Fix DU440 GPIO configuration   Stefan Roese
• [U-Boot] [PATCH 2/4] ppc4xx: Fix DU440 GPIO configuration   Matthias Fuchs
• [U-Boot] [PATCH 2/4] ppc4xx: Fix DU440 GPIO configuration   Stefan Roese
• [U-Boot] [PATCH 2/4] ppc4xx: Fix DU440 GPIO configuration   Stefan Roese
• [U-Boot] [PATCH 2/5] 86xx: remove the unused ddr_enable_ecc in the board file   Dave Liu
• [U-Boot] [PATCH 2/5] atmel_lcdfb: Straighten out funky vl_sync logic   Anatolij Gustschin
• [U-Boot] [PATCH 2/6] Pass dimm parameters to populate populate controller options   Haiying Wang
• [U-Boot] [PATCH 2/6] ppc4xx: Clean up PMC440 header   matthias.fuchs at esd-electronics.com
• [U-Boot] [PATCH 2/7] sh: r7780mp: Moved r7780mp board to board/renesas   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 2/7] sh: r7780mp: Moveed r7780mp board in board/renesas   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 3/3 v2] ppc4xx: Add routine to retrieve CPU number   Wolfgang Denk
• [U-Boot] [PATCH 3/3 v2] ppc4xx: Add routine to retrieve CPU number   Adam Graham
• [U-Boot] [PATCH 3/3 v3] ppc4xx: Add routine to retrieve CPU number   Adam Graham
• [U-Boot] [PATCH 3/3 v4] ppc4xx: Add routine to retrieve CPU number   Adam Graham
• [U-Boot] [PATCH 3/3 v5] ppc4xx: Add routine to retrieve CPU number   Adam Graham
• [U-Boot] [PATCH 3/3] Cleanup: fix "MHz" spelling   Wolfgang Denk
• [U-Boot] [PATCH 3/3] Cleanup: fix "MHz" spelling   Wolfgang Denk
• [U-Boot] [PATCH 3/3] iMX31: Add support to iMX31PDK board boots from NAND Flash   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 3/3] iMX31: Add support to iMX31PDK board boots from NAND Flash   Alan Carvalho de Assis
• [U-Boot] [PATCH 3/3] iMX31: Add support to iMX31PDK board boots from NAND Flash   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 3/3] iMX31: Add support to iMX31PDK board boots from NAND Flash   Alan Carvalho de Assis
• [U-Boot] [PATCH 3/3] iMX31: Add support to iMX31PDK board boots from NAND Flash   Magnus Lilja
• [U-Boot] [PATCH 3/3] iMX31: Add support to iMX31PDK board boots from NAND Flash   Wolfgang Denk
• [U-Boot] [PATCH 3/3] iMX31: Add support to iMX31PDK board boots from NAND Flash   Magnus Lilja
• [U-Boot] [PATCH 3/3] iMX31: Add support to iMX31PDK board boots from NAND Flash   Magnus Lilja
• [U-Boot] [PATCH 3/3] iMX31: Add support to iMX31PDK board boots from NAND Flash   Fabio Estevam
• [U-Boot] [PATCH 3/3] iMX31: Add support to iMX31PDK board boots from NAND Flash   Magnus Lilja
• [U-Boot] [PATCH 3/3] iMX31: Add support to iMX31PDK board boots from NAND Flash   Alan Carvalho de Assis
• [U-Boot] [PATCH 3/3] Moved initialization of PPC4xx EMAC to cpu_eth_init()   Ben Warren
• [U-Boot] [PATCH 3/3] Remove redundant #define for MPC8536DS   Haiying Wang
• [U-Boot] [PATCH 3/3] XPedite5370 board support   Peter Tyser
• [U-Boot] [PATCH 3/3] XPedite5370 board support   Andy Fleming
• [U-Boot] [PATCH 3/3] XPedite5370 board support   Peter Tyser
• [U-Boot] [PATCH 3/4] bootm: support subcommands in linux ppc bootm   Wolfgang Denk
• [U-Boot] [PATCH 3/4] bootm: support subcommands in linux ppc bootm   Kumar Gala
• [U-Boot] [PATCH 3/4] Enabled the Freescale SGMII riser card on 8536DS   Jason Jin
• [U-Boot] [PATCH 3/4] Enabled the Freescale SGMII riser card on 8536DS   Andy Fleming
• [U-Boot] [PATCH 3/4] Improve mpc85xx link script rodata section   Trent Piepho
• [U-Boot] [PATCH 3/4] Improve mpc85xx link script rodata section   Wolfgang Denk
• [U-Boot] [PATCH 3/4] Improve mpc85xx link script rodata section   Trent Piepho
• [U-Boot] [PATCH 3/4] Improve mpc85xx link script rodata section   Wolfgang Denk
• [U-Boot] [PATCH 3/4] Improve mpc85xx link script rodata section   Trent Piepho
• [U-Boot] [PATCH 3/4] mpc83xx: add TSECs' HRCWH masks for MPC837x processors   Anton Vorontsov
• [U-Boot] [PATCH 3/4] NAND fsl elbc: Set FMR[ECCM] based on page size.   Scott Wood
• [U-Boot] [PATCH 3/4] New board support: board dir tree files   Ron Madrid
• [U-Boot] [PATCH 3/4] New board support: board dir tree files   Scott Wood
• [U-Boot] [PATCH 3/4] ppc4xx: Add strapping mode for 667MHz CPU frequency on DU440 board   matthias.fuchs at esd-electronics.com
• [U-Boot] [PATCH 3/4] ppc4xx: Add strapping mode for 667MHz CPU frequency on DU440 board   Stefan Roese
• [U-Boot] [PATCH 3/5] 86xx: remove the second DDR LAW setting for mpc8641hpcn   Becky Bruce
• [U-Boot] [PATCH 3/5] 86xx: remove the second DDR LAW setting for mpc8641hpcn   Dave Liu
• [U-Boot] [PATCH 3/5] lcd: Implement lcd_printf()   Anatolij Gustschin
• [U-Boot] [PATCH 3/5] lcd: Implement lcd_printf()   Wolfgang Denk
• [U-Boot] [PATCH 3/6] Check DDR interleaving mode   Haiying Wang
• [U-Boot] [PATCH 3/6] ppc4xx: Fix esd loadpci command   matthias.fuchs at esd-electronics.com
• [U-Boot] [PATCH 3/7] sh: sh7785lcr: Moved sh7785lcr board to board/renesas   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 3/7] sh: sh7785lcr: Moveed sh7785lcr board in board/renesas   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 4/4] bootm: Added CONFIG_BOOTM_{LINUX, NETBSD, RTEMS}   Kumar Gala
• [U-Boot] [PATCH 4/4] bootm: Added CONFIG_BOOTM_{LINUX, NETBSD, RTEMS}   Wolfgang Denk
• [U-Boot] [PATCH 4/4] Do not init SATA when disabled on 8536DS.   Jason Jin
• [U-Boot] [PATCH 4/4] Do not init SATA when disabled on 8536DS.   Kumar Gala
• [U-Boot] [PATCH 4/4] Do not init SATA when disabled on 8536DS.   Andy Fleming
• [U-Boot] [PATCH 4/4] Do not init SATA when disabled on 8536DS.   Wolfgang Denk
• [U-Boot] [PATCH 4/4] Do not init SATA when disabled on 8536DS.   Wolfgang Denk
• [U-Boot] [PATCH 4/4] Do not init SATA when disabled on 8536DS.   Wolfgang Denk
• [U-Boot] [PATCH 4/4] mpc83xx: add SGMII riser module support for the MPC8378E-MDS boards   Anton Vorontsov
• [U-Boot] [PATCH 4/4] NAND: Properly create JFFS2 cleanmarkers.   Scott Wood
• [U-Boot] [PATCH 4/4] New board support: nand_spl specific files   Ron Madrid
• [U-Boot] [PATCH 4/4] New board support: nand_spl specific files   Scott Wood
• [U-Boot] [PATCH 4/4] ppc4xx: Fix USB 2.0 phy reset sequence   matthias.fuchs at esd-electronics.com
• [U-Boot] [PATCH 4/4] ppc4xx: Fix USB 2.0 phy reset sequence   Stefan Roese
• [U-Boot] [PATCH 4/4] ppc4xx: Fix USB 2.0 phy reset sequence   Matthias Fuchs
• [U-Boot] [PATCH 4/4] ppc4xx: Fix USB 2.0 phy reset sequence   Stefan Roese
• [U-Boot] [PATCH 4/4] ppc4xx: Fix USB 2.0 phy reset sequence   Stefan Roese
• [U-Boot] [PATCH 4/4] Use ALIGN() in mpc85xx linker script   Trent Piepho
• [U-Boot] [PATCH 4/5] 86xx: remove the unused code for 86xx family   Dave Liu
• [U-Boot] [PATCH 4/5] lcd: Set lcd_is_enabled before clearing the screen   Anatolij Gustschin
• [U-Boot] [PATCH 4/6] Add debug information for DDR controller registers   Haiying Wang
• [U-Boot] [PATCH 4/6] ppc4xx: Update PMC440 board configuration   matthias.fuchs at esd-electronics.com
• [U-Boot] [PATCH 4/7] sh: sh7763rdp: Moved sh7763rdp board to board/renesas   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 4/7] sh: sh7763rdp: Moveed sh7763rdp board in board/renesas   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 5/5] 86xx: remove the redundant r2 global data pointer save   Dave Liu
• [U-Boot] [PATCH 5/5] lcd: Let the board code show board-specific info   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 5/5] lcd: Let the board code show board-specific info   Anatolij Gustschin
• [U-Boot] [PATCH 5/5] lcd: Let the board code show board-specific info   Anatolij Gustschin
• [U-Boot] [PATCH 5/6] Add ddr interleaving suppport for MPC8572DS board   Haiying Wang
• [U-Boot] [PATCH 5/6] ppc4xx: Fix PMC440 BSP commands   matthias.fuchs at esd-electronics.com
• [U-Boot] [PATCH 5/7] sh: r2dplus: Moved r2dplus board to board/renesas   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 5/7] sh: r2dplus: Moveed r2dplus board in board/renesas   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 6/6] Add DDR options setting on MPC8641HPCN board   Haiying Wang
• [U-Boot] [PATCH 6/6] ppc4xx: Update PMC440 board support   matthias.fuchs at esd-electronics.com
• [U-Boot] [PATCH 6/7] sh: MigoR: Moved MigoR board to board/renesas   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 6/7] sh: MigoR: Moveed MigoR board in board/renesas   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 7/7] sh: rsk7203: Moved rsk7203 board to board/renesas   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 7/7] sh: rsk7203: Moveed rsk7203 board in board/renesas   Nobuhiro Iwamatsu
• [U-Boot] [PATCH ARM/AT91 0/4] AT91CAP9/AT91SAM9 bugfixes for 2008.12   Stelian Pop
• [U-Boot] [PATCH PPC_4XX V2] Print simple row of dots instead of spinning wheel   Wolfgang Denk
• [U-Boot] [PATCH PPC_4xx V3] Print simple row of dots instead of spinning wheel   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH PPC_4xx V3] Print simple row of dots instead of spinning wheel   Wolfgang Denk
• [U-Boot] [PATCH PPC_4xx V3] Print simple row of dots instead of spinning wheel   Stefan Roese
• [U-Boot] [PATCH PPC_4xx V3] Print simple row of dots instead of spinning wheel   Wolfgang Denk
• [U-Boot] [PATCH PPC_4xx V3] Print simple row of dots instead of spinning wheel   Matthias Fuchs
• [U-Boot] [PATCH PPC_4xx V3] Print simple row of dots instead of spinning wheel   Wolfgang Denk
• [U-Boot] [PATCH PPC_4xx V3] Print simple row of dots instead of spinning wheel   Wolfgang Denk
• [U-Boot] [PATCH PPC_4xx V3] Print simple row of dots instead of spinning wheel   Stefan Roese
• [U-Boot] [PATCH PPC_4xx V3] Print simple row of dots instead of spinning wheel   Wolfgang Denk
• [U-Boot] [PATCH PPC_4xx V3] Print simple row of dots instead of spinning wheel   Stefan Roese
• [U-Boot] [PATCH PPC_4xx V3] Print simple row of dots instead of spinning wheel   Wolfgang Denk
• [U-Boot] [PATCH PPC_4xx V3] Print simple row of dots instead of spinning wheel   Stefan Roese
• [U-Boot] [PATCH PPC_4xx] Print simple row of dots instead of spinning wheel   Wolfgang Denk
• [U-Boot] [PATCH rev2] net: Move initialization of Au1x00 SoC ethernet MAC to cpu_eth_init   Shinya Kuribayashi
• [U-Boot] [PATCH RFC] mpc8572ds relocatable   Wolfgang Denk
• [U-Boot] [PATCH RFC] mpc8572ds relocatable   Graeme Russ
• [U-Boot] [PATCH RFC] mpc8572ds relocatable   Joakim Tjernlund
• [U-Boot] [PATCH RFC] mpc8572ds relocatable   Swarthout Edward L
• [U-Boot] [PATCH RFC] mpc8572ds relocatable   Swarthout Edward L
• [U-Boot] [PATCH RFC] mpc8572ds relocatable   Joakim Tjernlund
• [U-Boot] [PATCH v2 0/16] updates for mgcoge, mgsuvd.   Heiko Schocher
• [U-Boot] [PATCH v2 0/16] updates for mgcoge, mgsuvd.   Wolfgang Denk
• [U-Boot] [PATCH v2 0/3] Support for XPedite5370 and misc GPIO   Peter Tyser
• [U-Boot] [PATCH v2 0/4] SGMII support for MPC8378E-MDS boards   Anton Vorontsov
• [U-Boot] [PATCH v2 0/4] SGMII support for MPC8378E-MDS boards   Kim Phillips
• [U-Boot] [PATCH v2 01/16] [POWERPC] mgsuvd, mgcoge: move this 2 boards in one dir.   Heiko Schocher
• [U-Boot] [PATCH v2 02/16] [PATCH] I2C: add new command i2c reset.   Ben Warren
• [U-Boot] [PATCH v2 02/16] [PATCH] I2C: add new command i2c reset.   Heiko Schocher
• [U-Boot] [PATCH v2 02/16] [PATCH] I2C: add new command i2c reset.   Ben Warren
• [U-Boot] [PATCH v2 02/16] [PATCH] I2C: add new command i2c reset.   Heiko Schocher
• [U-Boot] [PATCH v2 02/16] [PATCH] I2C: add new command i2c reset.   Wolfgang Denk
• [U-Boot] [PATCH v2 02/16] [PATCH] I2C: add new command i2c reset.   Heiko Schocher
• [U-Boot] [PATCH v2 03/16] [POWERPC] mgcoge: fix Codingstyle issues.   Heiko Schocher
• [U-Boot] [PATCH v2 04/10] fdt: Add fdt_getprop_u32_default helpers   Jerry Van Baren
• [U-Boot] [PATCH v2 04/10] fdt: Add fdt_getprop_u32_default helpers   Kumar Gala
• [U-Boot] [PATCH v2 04/16] i2c: add CONFIG_I2C_MULTI_BUS for soft_i2c and mpc8260 i2c driver.   Heiko Schocher
• [U-Boot] [PATCH v2 05/10] fdt: Added helper to set PCI dma-ranges property   Kumar Gala
• [U-Boot] [PATCH v2 05/10] fdt: Added helper to set PCI dma-ranges property   Jerry Van Baren
• [U-Boot] [PATCH v2 05/16] soft_i2c: prevent compilerwarnings if driver not uses CPU Pins.   Wolfgang Denk
• [U-Boot] [PATCH v2 05/16] soft_i2c: prevent compilerwarnings if driver not uses CPU Pins.   Heiko Schocher
• [U-Boot] [PATCH v2 05/16] soft_i2c: prevent compilerwarnings if driver not uses CPU Pins.   Ben Warren
• [U-Boot] [PATCH v2 06/16] [POWERPC] mgcoge, mgsuvd: add I2C support.   Heiko Schocher
• [U-Boot] [PATCH v2 07/16] [PATCH] mgcoge, mgsuvd: added EEprom support.   Heiko Schocher
• [U-Boot] [PATCH v2 08/16] [PATCH] lm75: fix Codingstyle issues.   Heiko Schocher
• [U-Boot] [PATCH v2 09/16] [PATCH] lm75: Make the LM75 MULTI_BUS compatible.   Heiko Schocher
• [U-Boot] [PATCH v2 1/3] Add support for PCA953x I2C gpio devices   Peter Tyser
• [U-Boot] [PATCH v2 1/6] flash: factor out adjusting of Flash address to the end of sector   Bartlomiej Sieka
• [U-Boot] [PATCH v2 1/6] flash: factor out adjusting of Flash address to the end of sector   Stefan Roese
• [U-Boot] [PATCH v2 1/6] flash: factor out adjusting of Flash address to the end of sector   Wolfgang Denk
• [U-Boot] [PATCH v2 1/6] flash: factor out adjusting of Flash address to the end of sector   Stefan Roese
• [U-Boot] [PATCH v2 1/6] flash: factor out adjusting of Flash address to the end of sector   Wolfgang Denk
• [U-Boot] [PATCH v2 1/6] flash: factor out adjusting of Flash address to the end of sector   Wolfgang Denk
• [U-Boot] [PATCH v2 1/6] flash: factor out adjusting of Flash address to the end of sector   Bartlomiej Sieka
• [U-Boot] [PATCH v2 1/6] flash: factor out adjusting of Flash address to the end of sector   Bartlomiej Sieka
• [U-Boot] [PATCH v2 1/6] flash: factor out adjusting of Flash address to the end of sector   Ben Warren
• [U-Boot] [PATCH v2 1/9] ColdFire: Remove linker file   Tsi-Chung Liew
• [U-Boot] [PATCH v2 10/16] [PATCH] mgcoge, mgsuvd: add DTT (LM75) support.   Heiko Schocher
• [U-Boot] [PATCH v2 11/16] [PATCH] soft_i2c: Add CFG_I2C_INIT_BOARD option   Heiko Schocher
• [U-Boot] [PATCH v2 12/16] [PATCH] mgcoge, mgsuvd: add boardspecific I2C deblocking mechanism.   Heiko Schocher
• [U-Boot] [PATCH v2 13/16] I2C: adding new "i2c bus" Command to the I2C Subsystem.   Heiko Schocher
• [U-Boot] [PATCH v2 13/16] I2C: adding new "i2c bus" Command to the I2C Subsystem.   Ben Warren
• [U-Boot] [PATCH v2 13/16] I2C: adding new "i2c bus" Command to the I2C Subsystem.   Heiko Schocher
• [U-Boot] [PATCH v2 13/16] I2C: adding new "i2c bus" Command to the I2C Subsystem.   Ben Warren
• [U-Boot] [PATCH v2 14/16] [PATCH] hush: add showvar command for hush shell.   Heiko Schocher
• [U-Boot] [PATCH v2 15/16] [PATCH] mgcoge, mgsuvd: added support for the IVM EEprom.   Heiko Schocher
• [U-Boot] [PATCH v2 16/16] [PATCH] mgsuvd, mgcoge: added BOOTCOUNT feature.   Heiko Schocher
• [U-Boot] [PATCH v2 2/3] Add support for Maxim's DS4510 I2C device   Peter Tyser
• [U-Boot] [PATCH v2 2/6] net: express the first argument to NetSetTimeout() in milliseconds   Bartlomiej Sieka
• [U-Boot] [PATCH v2 2/6] net: express the first argument to NetSetTimeout() in milliseconds   Ben Warren
• [U-Boot] [PATCH v2 2/9] ColdFire: Modules header files cleanup   Tsi-Chung Liew
• [U-Boot] [PATCH v2 3/3] XPedite5370 board support   Peter Tyser
• [U-Boot] [PATCH v2 3/3] XPedite5370 board support   Andy Fleming
• [U-Boot] [PATCH v2 3/6] net: Make TFTP server timeout configurable   Ben Warren
• [U-Boot] [PATCH v2 3/6] net: Make TFTP server timeout configurable   Bartlomiej Sieka
• [U-Boot] [PATCH v2 3/9] ColdFire: Remove platforms mii.c file   Tsi-Chung Liew
• [U-Boot] [PATCH v2 4/6] Restore alphabetic ordering in common/Makefile   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH v2 4/6] Restore alphabetic ordering in common/Makefile   Bartlomiej Sieka
• [U-Boot] [PATCH v2 4/6] Restore alphabetic ordering in common/Makefile   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH v2 4/6] Restore alphabetic ordering in common/Makefile   Bartlomiej Sieka
• [U-Boot] [PATCH v2 4/6] Restore alphabetic ordering in common/Makefile   Bartlomiej Sieka
• [U-Boot] [PATCH v2 4/9] ColdFire: Relocate FEC's GPIO and mii functions protocols   Tsi-Chung Liew
• [U-Boot] [PATCH v2 5/6] Automatic software update from TFTP server   Wolfgang Denk
• [U-Boot] [PATCH v2 5/6] Automatic software update from TFTP server   Bartlomiej Sieka
• [U-Boot] [PATCH v2 5/9] ColdFire: Add mii driver in drivers/net   Tsi-Chung Liew
• [U-Boot] [PATCH v2 5/9] ColdFire: Add mii driver in drivers/net   John Rigby
• [U-Boot] [PATCH v2 5/9] ColdFire: Add mii driver in drivers/net   Liew Tsi Chung
• [U-Boot] [PATCH v2 6/6] FIT: output image load address for type 'firmware', fix message while there   Bartlomiej Sieka
• [U-Boot] [PATCH v2 6/9] ColdFire: Use CFI driver for M5272C3   Tsi-Chung Liew
• [U-Boot] [PATCH v2 8/9] ColdFire: Add MCF5301x CPU and M53017EVB support   Tsi-Chung Liew
• [U-Boot] [PATCH v2 9/9] ColdFire: Fix compilation error   Tsi-Chung Liew
• [U-Boot] [PATCH v2] 85xx: properly document MPC85xx_PORDEVSR2_SEC_CFG   Timur Tabi
• [U-Boot] [PATCH v2] 85xx: properly document MPC85xx_PORDEVSR2_SEC_CFG   Wolfgang Denk
• [U-Boot] [PATCH v2] Added arch_lmb_reserve to allow arch specific memory regions protection   Wolfgang Denk
• [U-Boot] [PATCH v2] Added arch_lmb_reserve to allow arch specific memory regions protection   Kumar Gala
• [U-Boot] [PATCH v2] ADS5121 NAND driver   Scott Wood
• [U-Boot] [PATCH v2] ADS5121 NAND driver   John Rigby
• [U-Boot] [PATCH v2] ADS5121 NAND driver   Wolfgang Denk
• [U-Boot] [PATCH v2] ADS5121 NAND driver   Scott Wood
• [U-Boot] [PATCH v2] Align end of bss by 4 bytes   Selvamuthukumar
• [U-Boot] [PATCH v2] bootm: Move to using a function pointer table for the boot os function   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH v2] bootm: Move to using a function pointer table for the boot os function   Kumar Gala
• [U-Boot] [PATCH v2] bootm: Move to using a function pointer table for the boot os function   Wolfgang Denk
• [U-Boot] [PATCH v2] bootm: Move to using a function pointer table for the boot os function   Kumar Gala
• [U-Boot] [PATCH v2] bootm: Move to using a function pointer table for the boot os function   Wolfgang Denk
• [U-Boot] [PATCH v2] bootm: Move to using a function pointer table for the boot os function   Kumar Gala
• [U-Boot] [PATCH V2] FPGA: move fpga drivers to drivers/fpga   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH v2] hwmon: Add LM63 support   Dirk Eibach
• [U-Boot] [PATCH v2] hwmon: Add LM63 support   Wolfgang Denk
• [U-Boot] [PATCH v2] mpc83xx: add support for switching between USB Host/Function for MPC837XEMDS   Anton Vorontsov
• [U-Boot] [PATCH v2] mpc83xx: add support for switching between USB Host/Function for MPC837XEMDS   Kim Phillips
• [U-Boot] [PATCH v2] net: ne2000: Divided a function of NE2000 driver   Ben Warren
• [U-Boot] [PATCH v2] net: ne2000: Divided a function of NE2000 driver   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH v2] net: ne2000: Divided a function of NE2000 driver   Ben Warren
• [U-Boot] [PATCH v2] net: ne2000: Divided a function of NE2000 driver   Nobuhiro Iwamatsu
• [U-Boot] [PATCH v2] net: ne2000: Divided a function of NE2000 driver   Ben Warren
• [U-Boot] [PATCH v2] pci/fsl_pci_init: Enable inbound PCI config cycles   Peter Tyser
• [U-Boot] [PATCH v2] pci/fsl_pci_init: Enable inbound PCI config cycles   Peter Tyser
• [U-Boot] [PATCH v2] pci/fsl_pci_init: Enable inbound PCI config cycles   Kumar Gala
• [U-Boot] [PATCH v2] pci/fsl_pci_init: Enable inbound PCI config cycles   Kumar Gala
• [U-Boot] [PATCH v2] pci/fsl_pci_init: Enable inbound PCI config cycles   Kumar Gala
• [U-Boot] [PATCH v2] pci/fsl_pci_init: Enable inbound PCI config cycles   Peter Tyser
• [U-Boot] [PATCH v2] pci: Allow for PCI addresses to be 64-bit   Kumar Gala
• [U-Boot] [PATCH v2] pci: Allow for PCI addresses to be 64-bit   Becky Bruce
• [U-Boot] [PATCH v2] pci: Allow for PCI addresses to be 64-bit   Kumar Gala
• [U-Boot] [PATCH v2] pci: Allow for PCI addresses to be 64-bit   Kumar Gala
• [U-Boot] [PATCH v2] pci: Allow for PCI addresses to be 64-bit   Becky Bruce
• [U-Boot] [PATCH v2] Update U-Boot's build timestamp on every compile   Peter Tyser
• [U-Boot] [PATCH v2] Update U-Boot's build timestamp on every compile   Wolfgang Denk
• [U-Boot] [PATCH v2] Update U-Boot's build timestamp on every compile   Wolfgang Denk
• [U-Boot] [PATCH v2] Update U-Boot's build timestamp on every compile   Peter Tyser
• [U-Boot] [PATCH v3 2/6] i.MX31: Make the SPI bus and chip select configurable for MC13783   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH v3 2/6] i.MX31: Make the SPI bus and chip select configurable for MC13783   Wolfgang Denk
• [U-Boot] [PATCH v3 2/6] i.MX31: Make the SPI bus and chip select configurable for MC13783   Wolfgang Denk
• [U-Boot] [PATCH v3 3/6] i.MX31: Add basic support for Freescale's i.MX31 PDK board.   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH v3 3/6] i.MX31: Add basic support for Freescale's i.MX31 PDK board.   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH v3 3/6] i.MX31: Add basic support for Freescale's i.MX31 PDK board.   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH v3 3/6] i.MX31: Add basic support for Freescale's i.MX31 PDK board.   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH v3 3/6] i.MX31: Add basic support for Freescale's i.MX31 PDK board.   Wolfgang Denk
• [U-Boot] [PATCH v3 3/6] i.MX31: Add basic support for Freescale's i.MX31 PDK board.   Wolfgang Denk
• [U-Boot] [PATCH v3 3/6] i.MX31: Add basic support for Freescale's i.MX31 PDK board.   Alan Carvalho de Assis
• [U-Boot] [PATCH v3 3/6] i.MX31: Add basic support for Freescale's i.MX31 PDK board.   Alan Carvalho de Assis
• [U-Boot] [PATCH v3 3/6] i.MX31: Add basic support for Freescale's i.MX31 PDK board.   Fabio Estevam
• [U-Boot] [PATCH v3] [83xx] Adds two more ethernet interface to 83xx   Ben Warren
• [U-Boot] [PATCH v3] [83xx] Adds two more ethernet interface to 83xx   richardretanubun
• [U-Boot] [PATCH v3] [83xx] Adds two more ethernet interface to 83xx   Ben Warren
• [U-Boot] [PATCH v3] Add support for KMC KZM-ARM11-01 board   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH v3] Added arch_lmb_reserve to allow arch specific memory regions protection   Wolfgang Denk
• [U-Boot] [PATCH v3] Added arch_lmb_reserve to allow arch specific memory regions protection   Kumar Gala
• [U-Boot] [PATCH V3] mpc8572 additional end-point mode   Ed Swarthout
• [U-Boot] [PATCH V3] mpc8572 additional end-point mode   Andy Fleming
• [U-Boot] [PATCH v3] Update U-Boot's build timestamp on every compile   Wolfgang Denk
• [U-Boot] [PATCH v3] Update U-Boot's build timestamp on every compile   Peter Tyser
• [U-Boot] [PATCH v3a] ppc4xx: New board avnet fx12 minimodul   schardt
• [U-Boot] [PATCH v4] Add support for KMC KZM-ARM11-01 board   Tomohiro Masubuchi
• [U-Boot] [PATCH v4] Update U-Boot's build timestamp on every compile   Peter Tyser
• [U-Boot] [PATCH v5] bootm: Add sub commands   Kumar Gala
• [U-Boot] [PATCH/RFC] Some speed improvements to U-Boot JFFS2 code   Wolfgang Denk
• [U-Boot] [PATCH/RFC] Some speed improvements to U-Boot JFFS2 code   Ilya Yanok
• [U-Boot] [PATCH/RFC] Some speed improvements to U-Boot JFFS2 code   Michael Lawnick
• [U-Boot] [PATCH/RFC] Some speed improvements to U-Boot JFFS2 code   Ilya Yanok
• [U-Boot] [PATCH] - fix "nand erase clean" problem   Ilko Iliev
• [U-Boot] [PATCH] - fix "nand erase clean" problem   Scott Wood
• [U-Boot] [PATCH] - fix "nand erase clean" problem   Ilko Iliev
• [U-Boot] [PATCH] - fix "nand erase clean" problem   Scott Wood
• [U-Boot] [PATCH] - fix "nand erase clean" problem   Ilko Iliev
• [U-Boot] [PATCH] - fix "nand erase clean" problem   Scott Wood
• [U-Boot] [PATCH] 440spe MQ initialization   Wolfgang Denk
• [U-Boot] [PATCH] 440spe MQ initialization   Stefan Roese
• [U-Boot] [PATCH] 440spe MQ initialization   Wolfgang Denk
• [U-Boot] [PATCH] 440spe MQ initialization   Stefan Roese
• [U-Boot] [PATCH] 74xx/7xx/86xx: Rename flush_data_cache to flush_dcache to match 85xx version   Jon Loeliger
• [U-Boot] [PATCH] 74xx/7xx/86xx: Rename flush_data_cache to flush_dcache to match 85xx version   Kumar Gala
• [U-Boot] [PATCH] 74xx/7xx/86xx: Rename flush_data_cache to flush_dcache to match 85xx version   Wolfgang Denk
• [U-Boot] [PATCH] 74xx: use r4 instead of r2 in lock_ram_in_cache and unlock_ram_in_cache   Kumar Gala
• [U-Boot] [PATCH] 74xx: use r4 instead of r2 in lock_ram_in_cache and unlock_ram_in_cache   Liu Dave-R63238
• [U-Boot] [PATCH] 74xx: use r4 instead of r2 in lock_ram_in_cache and unlock_ram_in_cache   Kumar Gala
• [U-Boot] [PATCH] 74xx: use r4 instead of r2 in lock_ram_in_cache and unlock_ram_in_cache   Wolfgang Denk
• [U-Boot] [PATCH] 74xx: use r4 instead of r2 in lock_ram_in_cache and unlock_ram_in_cache   Dave Liu
• [U-Boot] [PATCH] 83xx NAND boot: wait for LTESR[CC]   Scott Wood
• [U-Boot] [PATCH] 85xx do not reset PIC if already configured   Ed Swarthout
• [U-Boot] [PATCH] 85xx do not reset PIC if already configured   Andy Fleming
• [U-Boot] [PATCH] 85xx if NUM_CPUS>1, print cpu number   Ed Swarthout
• [U-Boot] [PATCH] 85xx if NUM_CPUS>1, print cpu number   Andy Fleming
• [U-Boot] [PATCH] 85xx: Fix compile warning in mpc8536ds.c   Kumar Gala
• [U-Boot] [PATCH] 85xx: Fix compile warning in mpc8536ds.c   Wolfgang Denk
• [U-Boot] [PATCH] 85xx: Fix MPC85xx_PORDEVSR_IO_SEL mask for MPC8572   Andy Fleming
• [U-Boot] [PATCH] 85xx: Fix MPC85xx_PORDEVSR_IO_SEL mask for MPC8572   Peter Tyser
• [U-Boot] [PATCH] 85xx: Fix the incorrect register used for DDR erratum1   Dave Liu
• [U-Boot] [PATCH] 85xx: Fix the incorrect register used for DDR erratum1   Andy Fleming
• [U-Boot] [PATCH] 85xx: properly document MPC85xx_PORDEVSR2_SEC_CFG   Wolfgang Denk
• [U-Boot] [PATCH] 85xx: properly document MPC85xx_PORDEVSR2_SEC_CFG   Timur Tabi
• [U-Boot] [PATCH] 85xx: properly document MPC85xx_PORDEVSR2_SEC_CFG   Timur Tabi
• [U-Boot] [PATCH] 85xx: remove unused config definition   Dave Liu
• [U-Boot] [PATCH] 85xx: remove unused config definition   Andy Fleming
• [U-Boot] [PATCH] 85xx: Update MPC85xx_PORDEVSR_IO_SEL mask   Peter Tyser
• [U-Boot] [PATCH] 85xx: Update MPC85xx_PORDEVSR_IO_SEL mask   Andy Fleming
• [U-Boot] [PATCH] 85xx: Using proper I2C source clock divider for MPC8544   Kumar Gala
• [U-Boot] [PATCH] 85xx: Using proper I2C source clock divider for MPC8544   Kumar Gala
• [U-Boot] [PATCH] 85xx: Using proper I2C source clock divider for MPC8544   Kumar Gala
• [U-Boot] [PATCH] 85xx: Using proper I2C source clock divider for MPC8544   Kumar Gala
• [U-Boot] [PATCH] 85xx: Using proper I2C source clock divider for MPC8544   Wolfgang Grandegger
• [U-Boot] [PATCH] 85xx: Using proper I2C source clock divider for MPC8544   Wolfgang Grandegger
• [U-Boot] [PATCH] 85xx: Using proper I2C source clock divider for MPC8544   Wolfgang Grandegger
• [U-Boot] [PATCH] 85xx: Using proper I2C source clock divider for MPC8544   Wolfgang Grandegger
• [U-Boot] [PATCH] 85xx: Using proper I2C source clock divider for MPC8544   Wolfgang Grandegger
• [U-Boot] [PATCH] 8641HPCN: Config file cleanup   Becky Bruce
• [U-Boot] [PATCH] 86xx: Make dram_size a phys_size_t   Becky Bruce
• [U-Boot] [PATCH] 86xx: Move the clear_tlbs before MMU turn on   Dave Liu
• [U-Boot] [PATCH] 86xx: remove redudant code with lib_ppc/interrupts.c   Wolfgang Denk
• [U-Boot] [PATCH] 86xx: remove redudant code with lib_ppc/interrupts.c   Wolfgang Denk
• [U-Boot] [PATCH] 86xx: remove the unused definition   Dave Liu
• [U-Boot] [PATCH] 86xx: remove the unused definition   Jon Loeliger
• [U-Boot] [PATCH] [83xx] Removed #ifdef CONFIG_MPC834X dependency on upmconfig function   richardretanubun
• [U-Boot] [PATCH] [83xx] Removed #ifdef CONFIG_MPC834X dependency on upmconfig function   Kim Phillips
• [U-Boot] [PATCH] [83xx] Removed #ifdef CONFIG_MPC834X dependency on upmconfig function   Richard Retanubun
• [U-Boot] [PATCH] [ARM] Apollon UBI support   Kyungmin Park
• [U-Boot] [PATCH] [ARM] Apollon UBI support   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] [ARM] Apollon UBI support   Wolfgang Denk
• [U-Boot] [PATCH] [ARM] Apollon UBI support   Kyungmin Park
• [U-Boot] [PATCH] [ARM] Apollon UBI support   Ben Warren
• [U-Boot] [PATCH] [ARM] Apollon UBI support (take #2)   Kyungmin Park
• [U-Boot] [PATCH] [ARM] Apollon UBI support v3   Kyungmin Park
• [U-Boot] [PATCH] [ARM] Apollon UBI support v3   Magnus Lilja
• [U-Boot] [PATCH] [ARM] Move machine specific code to board at s3c64xx   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] [ARM] Move machine specific code to board at s3c64xx   Kyungmin Park
• [U-Boot] [PATCH] [ARM] Move machine specific code to board at s3c64xx   Kyungmin Park
• [U-Boot] [PATCH] [ARM] Move machine specific code to board at s3c64xx   Wolfgang Denk
• [U-Boot] [PATCH] [ARM] Move machine specific code to board at s3c64xx   Kyungmin Park
• [U-Boot] [PATCH] [ARM] Move machine specific code to board at s3c64xx   Kyungmin Park
• [U-Boot] [PATCH] [ARM] Move machine specific code to board at s3c64xx   Wolfgang Denk
• [U-Boot] [PATCH] [ARM] Move machine specific code to board at s3c64xx   Wolfgang Denk
• [U-Boot] [PATCH] [ARM] Move machine specific code to board at s3c64xx   Guennadi Liakhovetski
• [U-Boot] [PATCH] [ARM] Move machine specific code to board at s3c64xx   Guennadi Liakhovetski
• [U-Boot] [PATCH] [ARM] Move machine specific code to board at s3c64xx   Guennadi Liakhovetski
• [U-Boot] [PATCH] [ARM] Move machine specific code to board at s3c64xx   Guennadi Liakhovetski
• [U-Boot] [PATCH] [ARM] Move machine specific code to board at s3c64xx   Guennadi Liakhovetski
• [U-Boot] [PATCH] [ARM] Move machine specific code to board at s3c64xx   Guennadi Liakhovetski
• [U-Boot] [PATCH] [Not for inclusion] Add support to verify UPM array   Selvamuthukumar
• [U-Boot] [PATCH] [ONENAND] Reduce OneNAND IPL code size   Kyungmin Park
• [U-Boot] [PATCH] [ONENAND] Reduce OneNAND IPL code size   Wolfgang Denk
• [U-Boot] [PATCH] [ONENAND] Reduce OneNAND IPL code size   Kyungmin Park
• [U-Boot] [PATCH] [ONENAND] Reduce OneNAND IPL code size   Wolfgang Denk
• [U-Boot] [PATCH] [POWERPC] remove compilerwarning in lib_ppc_board.c   Wolfgang Denk
• [U-Boot] [PATCH] [POWERPC] remove compilerwarning in lib_ppc_board.c   Jin Zhengxiong-R64188
• [U-Boot] [PATCH] [POWERPC] remove compilerwarning in lib_ppc_board.c   Heiko Schocher
• [U-Boot] [PATCH] [UBI] Basic Unsorted Block Image (UBI) support (part 1)   Kyungmin Park
• [U-Boot] [PATCH] [UBI] Basic Unsorted Block Image (UBI) support (part 1)   Wolfgang Denk
• [U-Boot] [PATCH] [UBI] Basic Unsorted Block Image (UBI) support (part 1)   Stefan Roese
• [U-Boot] [PATCH] [UBI] Basic Unsorted Block Image (UBI) support (part 1)   Wolfgang Denk
• [U-Boot] [PATCH] [UBI] Basic Unsorted Block Image (UBI) support (part 1)   Kyungmin Park
• [U-Boot] [PATCH] [UBI] Basic Unsorted Block Image (UBI) support (part 2)   Kyungmin Park
• [U-Boot] [PATCH] [UBI] Basic Unsorted Block Image (UBI) support v3 (#1)   Kyungmin Park
• [U-Boot] [PATCH] [UBI] Basic Unsorted Block Image (UBI) support v3 (#2)   Kyungmin Park
• [U-Boot] [PATCH] [UBI] Basic Unsorted Block Image (UBI) support v3 (#3)   Kyungmin Park
• [U-Boot] [PATCH] [UBI] Basic Unsorted Block Image (UBI) support v3 (#4)   Kyungmin Park
• [U-Boot] [PATCH] [UBI] Basic Unsorted Block Image (UBI) support v3 (#5)   Kyungmin Park
• [U-Boot] [PATCH] [UBI] Basic Unsorted Block Image (UBI) support v3 (#6)   Kyungmin Park
• [U-Boot] [PATCH] [UBI] UBI command support   Kyungmin Park
• [U-Boot] [PATCH] [UBI] UBI command support   Wolfgang Denk
• [U-Boot] [PATCH] [UBI] UBI command support   Kyungmin Park
• [U-Boot] [PATCH] [UBI] UBI command support   Wolfgang Denk
• [U-Boot] [PATCH] [UBI] UBI command support (take #2)   Kyungmin Park
• [U-Boot] [PATCH] [UBI] UBI command support v3   Kyungmin Park
• [U-Boot] [PATCH] [UBI] UBI command support v3   Magnus Lilja
• [U-Boot] [PATCH] Add "memenv" command, to set environment from a memory area   Alessandro Rubini
• [U-Boot] [PATCH] Add "memenv" command, to set environment from a memory area   Wolfgang Denk
• [U-Boot] [PATCH] Add cpu/8xxx to TAGS_SUBDIRS   Ed Swarthout
• [U-Boot] [PATCH] Add cpu/8xxx to TAGS_SUBDIRS   Andy Fleming
• [U-Boot] [PATCH] Add feature-removal-schedule.txt   Peter Tyser
• [U-Boot] [PATCH] Add IC Ident. Module (IIM) support for ADS5121   Martha Marx
• [U-Boot] [PATCH] Add IC Ident. Module (IIM) support for ADS5121   John Rigby
• [U-Boot] [PATCH] Add IC Identif Module (IIM) support for ADS5121   Martha Marx
• [U-Boot] [PATCH] Add IC Identif Module (IIM) support for ADS5121   Wolfgang Denk
• [U-Boot] [PATCH] Add IC Identif Module (IIM) support for ADS5121   John Rigby
• [U-Boot] [PATCH] Add simple IP/UDP fragmentation support   Ben Warren
• [U-Boot] [PATCH] Add simple IP/UDP fragmentation support   Wolfgang Denk
• [U-Boot] [PATCH] Add simple IP/UDP fragmentation support   Ben Warren
• [U-Boot] [PATCH] Add simple IP/UDP fragmentation support   Ben Warren
• [U-Boot] [PATCH] Add support for CONFIG_EFI_PARTITION (GUID Partition Table)   Wolfgang Denk
• [U-Boot] [PATCH] Add WinCE image load/boot cmd   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] Add WinCE image load/boot cmd   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] Added a do_div() wrapper macro, lldiv(). The new macro doesn't modify the dividend and returns the result of division, so it is useful in complex expressions, i.e. "return(a/b)" -> "return(lldiv(a,b))"   Sergei Poselenov
• [U-Boot] [PATCH] Added arch_lmb_reserve to allow arch specific memory regions protection   Kumar Gala
• [U-Boot] [PATCH] Added arch_lmb_reserve to allow arch specific memory regions protection   Kumar Gala
• [U-Boot] [PATCH] ADS5121 NAND driver   John Rigby
• [U-Boot] [PATCH] ADS5121 NAND driver   Wolfgang Denk
• [U-Boot] [PATCH] ADS5121 NAND driver   John Rigby
• [U-Boot] [PATCH] ads5121: support for running from memory   Nikita V. Youshchenko
• [U-Boot] [PATCH] ads5121: support for running from memory   Wolfgang Denk
• [U-Boot] [PATCH] ads5121: support for running from memory   Nikita V. Youshchenko
• [U-Boot] [PATCH] Align end of bss by 4 bytes,   Selvamuthukumar
• [U-Boot] [PATCH] Align end of bss by 4 bytes,   Kim Phillips
• [U-Boot] [PATCH] Align end of bss by 4 bytes,   Selvamuthukumar
• [U-Boot] [PATCH] Align end of bss by 4 bytes,   Kumar Gala
• [U-Boot] [PATCH] Align end of bss by 4 bytes,   Wolfgang Denk
• [U-Boot] [PATCH] Align end of bss by 4 bytes,   Selvamuthukumar
• [U-Boot] [PATCH] Align end of bss by 4 bytes,   Wolfgang Denk
• [U-Boot] [PATCH] Align end of bss by 4 bytes,   Wolfgang Denk
• [U-Boot] [PATCH] Align end of bss by 4 bytes,   Selvamuthukumar
• [U-Boot] [PATCH] Align end of bss by 4 bytes.   Selvamuthukumar
• [U-Boot] [PATCH] Align end of bss by 4 bytes.   Dan Malek
• [U-Boot] [PATCH] Align end of bss by 4 bytes.   Graeme Russ
• [U-Boot] [PATCH] Align end of bss by 4 bytes.   Trent Piepho
• [U-Boot] [PATCH] Align end of bss by 4 bytes.   Selvamuthukumar
• [U-Boot] [PATCH] Allow Nand and OneNand to coexist   Alessandro Rubini
• [U-Boot] [PATCH] Allow Nand and OneNand to coexist   Scott Wood
• [PATCH] Allow onenand and nand to cohexist in put_fl_mem   Alessandro Rubini
• [U-Boot] [PATCH] api: Fix building with CONFIG_API   Wolfgang Denk
• [U-Boot] [PATCH] api: fix type mismatch   Matthias Fuchs
• [U-Boot] [PATCH] api: fix type mismatch   Wolfgang Denk
• [U-Boot] [PATCH] ARM - Integrator[AP/CP] - - Correct Improper ulong division   Wolfgang Denk
• [U-Boot] [PATCH] ARM DaVinci: Add maintainer informations for SFFSDR board.   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] ARM DaVinci: Add maintainer informations for SFFSDR board.   Hugo Villeneuve
• [U-Boot] [PATCH] ARM DaVinci: Add maintainer informations for SFFSDR board.   Wolfgang Denk
• [U-Boot] [PATCH] ARM DaVinci: Add maintainer informations for SFFSDR board.   Hugo Villeneuve
• [U-Boot] [PATCH] ARM DaVinci: Add maintainer informations for SFFSDR board.   Hugo Villeneuve
• [U-Boot] [PATCH] ARM DaVinci: Add maintainer informations for SFFSDR board.   Hugo Villeneuve
• [U-Boot] [PATCH] ARM DaVinci: Add maintainer informations for SFFSDR board.   Wolfgang Denk
• [U-Boot] [PATCH] ARM DaVinci: Remove redundant setting ofGD_FLG_RELOC for sffsdr board.   Hugo Villeneuve
• [U-Boot] [PATCH] ARM DaVinci: Remove redundant setting ofGD_FLG_RELOC for sffsdr board.   Wolfgang Denk
• [U-Boot] [PATCH] ARM DaVinci: Remove redundant setting of GD_FLG_RELOC for sffsdr board.   Wolfgang Denk
• [U-Boot] [PATCH] ARM/Versatile port: Removed unused functions   Roman Mashak
• [U-Boot] [PATCH] ARM926EJ-S: relocate OMAP specific 'cpuinfo.c' into OMAP directory   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] ARM926EJ-S: relocate OMAP specific 'cpuinfo.c' into OMAP directory   Roman Mashak
• [U-Boot] [PATCH] ARM926EJ-S: relocate OMAP specific 'cpuinfo.c' into OMAP directory (fixed patch)   Roman Mashak
• [U-Boot] [PATCH] ARM: Use do_div() instead of division for "long long".   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] ARM: Use do_div() instead of division for "long long".   Wolfgang Denk
• [U-Boot] [PATCH] ARM: Use do_div() instead of division for "long long".   Wolfgang Denk
• [U-Boot] [PATCH] at91: board specific lowlevel_init.S   Ilko Iliev
• [U-Boot] [PATCH] at91: board specific lowlevel_init.S   Wolfgang Denk
• [U-Boot] [PATCH] at91: board specific lowlevel_init.S   Ilko Iliev
• [U-Boot] [PATCH] at91: board specific lowlevel_init.S   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] at91: board specific lowlevel_init.S   Wolfgang Denk
• [U-Boot] [PATCH] at91: board specific lowlevel_init.S   Ilko Iliev
• [U-Boot] [PATCH] at91: board specific lowlevel_init.S   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] at91: board specific lowlevel_init.S   Ilko Iliev
• [U-Boot] [PATCH] at91: board specific lowlevel_init.S   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] at91: board specific lowlevel_init.S   Ilko Iliev
• [U-Boot] [PATCH] at91: board specific lowlevel_init.S   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] at91: board specific lowlevel_init.S   Ilko Iliev
• [U-Boot] [PATCH] at91: board specific lowlevel_init.S   Ilko Iliev
• [U-Boot] [PATCH] at91: board specific lowlevel_init.S   Ben Warren
• [U-Boot] [PATCH] at91: board specific lowlevel_init.S   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] at91: board specific lowlevel_init.S   Ilko Iliev
• [U-Boot] [PATCH] at91: board specific lowlevel_init.S   Wolfgang Denk
• [U-Boot] [PATCH] at91: board specific lowlevel_init.S   Wolfgang Denk
• [U-Boot] [PATCH] at91: board specific lowlevel_init.S   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] at91: board specific lowlevel_init.S   Ilko Iliev
• [U-Boot] [PATCH] at91: board specific lowlevel_init.S   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] AT91: Enable PLLB for USB   Stelian Pop
• [U-Boot] [PATCH] AT91: Enable PLLB for USB   Remy Bohmer
• [U-Boot] [PATCH] AT91: Enable PLLB for USB   Stelian Pop
• [U-Boot] [PATCH] AT91: Replace (undefined) AT91_ID_US* by the board specific values.   Stelian Pop
• [U-Boot] [PATCH] AT91: Replace AT91_BASE_EMAC by the board specific values.   Stelian Pop
• [U-Boot] [PATCH] AT91: Use AT91_CPU_CLOCK in displays   Stelian Pop
• [U-Boot] [PATCH] AT91SAM9263-pm9263-support   Ilko Iliev
• [U-Boot] [PATCH] AT91SAM9263-pm9263-support   Wolfgang Denk
• [U-Boot] [PATCH] AT91SAM9263-pm9263-support   Robert Schwebel
• [U-Boot] [PATCH] AT91SAM9263-pm9263-support   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] bootm: Move to using a function pointer table for the boot os function   Kumar Gala
• [U-Boot] [PATCH] CFI Driver: fix "flash not ready" problem   Wolfgang Denk
• [U-Boot] [PATCH] CFI Driver: fix "flash not ready" problem   Stefan Roese
• [U-Boot] [PATCH] CFI Driver: fix "flash not ready" problem   T Ziomek
• [U-Boot] [PATCH] cfi_flash write fix for AMD legacy   Ed Swarthout
• [U-Boot] [PATCH] cfi_flash write fix for AMD legacy   Stefan Roese
• [U-Boot] [PATCH] Change UEC PHY interface to RGMII on MPC8568MDS   Ben Warren
• [U-Boot] [PATCH] cmd_i2c: Fix help for CONFIG_I2C_CMD_TREE && !CONFIG_I2C_MULTI_BUS   Peter Tyser
• [U-Boot] [PATCH] cmd_i2c: Fix help for CONFIG_I2C_CMD_TREE && !CONFIG_I2C_MULTI_BUS   Wolfgang Denk
• [U-Boot] [PATCH] cmd_i2c: Update available commands when CONFIG_I2C_CMD_TREE is defined   Peter Tyser
• [U-Boot] [PATCH] cmd_i2c: Update available commands when CONFIG_I2C_CMD_TREE is defined   Peter Tyser
• [U-Boot] [PATCH] cmd_i2c: Update available commands when CONFIG_I2C_CMD_TREE is defined   Wolfgang Denk
• [U-Boot] [PATCH] cmd_i2c: Update available commands when CONFIG_I2C_CMD_TREE is defined   Wolfgang Denk
• [U-Boot] [PATCH] cmd_i2c: Update available commands when CONFIG_I2C_CMD_TREE is defined   Ben Warren
• [U-Boot] [PATCH] ColdFire: Fix M5329EVB and M5373EVB nand issue   Tsi-Chung Liew
• [U-Boot] [PATCH] CONFIG_EFI_PARTITION: Added support for EFI partition in cmd_ext2fs.c   Wolfgang Denk
• [U-Boot] [PATCH] CONFIG_EFI_PARTITION: Added support for EFI partition in cmd_ext2fs.c   richardretanubun
• [U-Boot] [PATCH] Custom AFEB9260 board support   Wolfgang Denk
• [U-Boot] [PATCH] Custom AFEB9260 board support   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] dataflash: fix a problem with the last partition   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] dataflash: fix a problem with the last partition   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] dataflash: fix a problem with the last partition   Stefan Roese
• [U-Boot] [PATCH] dataflash: fix a problem with the last partition   Wolfgang Denk
• [U-Boot] [PATCH] dataflash: fix a problem with the last partition   Scott Wood
• [U-Boot] [PATCH] dataflash: fix a problem with the last partition   Wolfgang Denk
• [U-Boot] [PATCH] dataflash: fix a problem with the last partition   Ilko Iliev
• [U-Boot] [PATCH] drivers/qe/uec_phy.c: Added PHY-less (fixed PHY) driver.   Richard Retanubun
• [U-Boot] [PATCH] drivers/qe/uec_phy.c: Added PHY-less (fixed PHY) driver.   Richard Retanubun
• [U-Boot] [PATCH] drivers/qe/uec_phy.c: Added PHY-less (fixed PHY) driver.   Richard Retanubun
• [U-Boot] [PATCH] enable 10/100M at VSC8601 at tsec driver   Wolfgang Denk
• [U-Boot] [PATCH] enable 10/100M at VSC8601 at tsec driver   Ben Warren
• [U-Boot] [PATCH] enable 10/100M at VSC8601 at tsec driver   Andy Fleming
• [U-Boot] [PATCH] Expose command table search for sub-commands   Kumar Gala
• [U-Boot] [PATCH] Expose command table search for sub-commands   Wolfgang Denk
• [U-Boot] [PATCH] FDT: don't use private kernel header files   Wolfgang Denk
• [U-Boot] [PATCH] FDT: don't use private kernel header files   Wolfgang Denk
• [U-Boot] [PATCH] fdt_resize(): ensure minimum padding   Peter Korsgaard
• [U-Boot] [PATCH] fdt_resize(): ensure minimum padding   Jerry Van Baren
• [U-Boot] [PATCH] fdt_resize(): ensure minimum padding   Peter Korsgaard
• [U-Boot] [PATCH] fdt_resize(): ensure minimum padding   Peter Korsgaard
• [U-Boot] [PATCH] fdt_resize(): ensure minimum padding   Jerry Van Baren
• [U-Boot] [PATCH] fdt_resize(): Expand to next page boundary independent of offset   Peter Korsgaard
• [PATCH] Fix strmhz(): avoid printing negative fractions   Wolfgang Denk
• [U-Boot] [PATCH] Fix the function conflict in x86emu when DEBUG is on   Wolfgang Denk
• [U-Boot] [PATCH] Fix the function conflict in x86emu when DEBUG is on   Jason Jin
• [U-Boot] [PATCH] Fix to the auto-update feature documentation (CONFIG_UPDATE_TFTP_MSEC_MAX)   Bartlomiej Sieka
• [U-Boot] [PATCH] Fix typo in cpu/mpc85xx/cpu.c   Ben Warren
• [U-Boot] [PATCH] Fix typo in cpu/mpc85xx/cpu.c   Andy Fleming
• [U-Boot] [PATCH] Fix USB init sequence for the lwmon5 board.   sascha.laue at liebherr.com
• [U-Boot] [PATCH] Fix USB init sequence for the lwmon5 board.   Wolfgang Denk
• [U-Boot] [PATCH] Fix USB init sequence for the lwmon5 board.   Matthias Fuchs
• [U-Boot] [PATCH] Fixed lineendings in tools/img2brec.sh   Niklaus Giger
• [U-Boot] [PATCH] Fixed lineendings in tools/img2brec.sh   Wolfgang Denk
• [U-Boot] [PATCH] Flex-OneNAND driver   Wolfgang Denk
• [U-Boot] [PATCH] Flex-OneNAND driver   Scott Wood
• [U-Boot] [PATCH] Flex-OneNAND driver   Rohit
• [U-Boot] [PATCH] Flex-OneNAND driver   Scott Wood
• [U-Boot] [PATCH] Flex-OneNAND driver   Rohit
• [U-Boot] [PATCH] Flex-OneNAND driver   Scott Wood
• [U-Boot] [PATCH] Flex-OneNAND driver   Kyungmin Park
• [U-Boot] [PATCH] Flex-OneNAND driver   Scott Wood
• [U-Boot] [PATCH] fsl ddr skip interleaving if not supported.   Ed Swarthout
• [U-Boot] [PATCH] FSL: Fix get_cpu_board_revision() return value.   Rafal Czubak
• [U-Boot] [PATCH] FSL: Fix get_cpu_board_revision() return value.   Andy Fleming
• [U-Boot] [PATCH] fsl_diu: fix alignment error that caused malloc corruption   Wolfgang Denk
• [U-Boot] [PATCH] fsl_diu: fix alignment error that caused malloc corruption   Nikita V. Youshchenko
• [U-Boot] [PATCH] fsl_law clear enable before changing.   Ed Swarthout
• [U-Boot] [PATCH] fsl_law clear enable before changing.   Andy Fleming
• [U-Boot] [PATCH] fsl_pci_init do not scan bus when configured as an end-point   Peter Tyser
• [U-Boot] [PATCH] fsl_pci_init do not scan bus when configured as an end-point   Andy Fleming
• [U-Boot] [PATCH] fsl_pci_init do not scan bus when configured as an end-point   Wolfgang Denk
• [U-Boot] [PATCH] fsl_pci_init do not scan bus when configured as an end-point   Ed Swarthout
• [U-Boot] [PATCH] fsl_pci_init do not scan bus when configuredas an end-point   Swarthout Edward L
• [U-Boot] [PATCH] Handle environment variables like commands   Stefano Babic
• [U-Boot] [PATCH] Handle environment variables like commands   Petri Lehtinen
• [U-Boot] [PATCH] Handle environment variables like commands   Wolfgang Denk
• [U-Boot] [PATCH] Handle environment variables like commands   Wolfgang Denk
• [U-Boot] [PATCH] Handle environment variables like commands   stefano babic
• [U-Boot] [PATCH] Handle environment variables like commands   stefano babic
• [U-Boot] [PATCH] Handle environment variables like commands   Joakim Tjernlund
• [U-Boot] [PATCH] Handle environment variables like commands   Wolfgang Denk
• [U-Boot] [PATCH] Handle environment variables like commands   Wolfgang Denk
• [U-Boot] [PATCH] Handle environment variables like commands   Stefano Babic
• [U-Boot] [PATCH] Handle environment variables like commands   Wolfgang Denk
• [U-Boot] [PATCH] Handle environment variables like commands   stefano babic
• [U-Boot] [PATCH] Hardware watchdog support for AT91SAM9260 CPU   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] Hardware watchdog support for AT91SAM9260 CPU   Sergey Lapin
• [U-Boot] [PATCH] hwmon: Add LM63 support   Eibach, Dirk
• [U-Boot] [PATCH] i2c: add i2c reset command.   Wolfgang Denk
• [U-Boot] [PATCH] I2C: adding new "i2c bus" Command to the I2C Subsystem.   Wolfgang Denk
• [U-Boot] [PATCH] I2C: Fix CodingStyle issues in soft_i2c.c   Wolfgang Denk
• [U-Boot] [PATCH] i2c: merge all i2c_reg_read() and i2c_reg_write() into inline functions   Timur Tabi
• [U-Boot] [PATCH] i2c: merge all i2c_reg_read() and i2c_reg_write() into inline functions   Wolfgang Denk
• [U-Boot] [PATCH] i2c: merge all i2c_reg_read() and i2c_reg_write() into inline functions   Wolfgang Denk
• [U-Boot] [PATCH] i2c: merge all i2c_reg_read() and i2c_reg_write() into inline functions   Wolfgang Denk
• [U-Boot] [PATCH] i2c: merge all i2c_reg_read() and i2c_reg_write() into inline functions   Timur Tabi
• [U-Boot] [PATCH] i2c: merge all i2c_reg_read() and i2c_reg_write() into inline functions   Timur Tabi
• [U-Boot] [PATCH] i2c: merge all i2c_reg_read() and i2c_reg_write() into inline functions   Stefan Roese
• [U-Boot] [PATCH] i2c: merge all i2c_reg_read() and i2c_reg_write() into inline functions   Timur Tabi
• [U-Boot] [PATCH] i2c: merge all i2c_reg_read() and i2c_reg_write() into inline functions   Wolfgang Denk
• [U-Boot] [PATCH] i2c: merge all i2c_reg_read() and i2c_reg_write() into inline functions   Mike Frysinger
• [U-Boot] [PATCH] i2c: merge all i2c_reg_read() and i2c_reg_write() into inline functions   Timur Tabi
• [U-Boot] [PATCH] i2c: merge all i2c_reg_read() and i2c_reg_write() into inline functions   Mike Frysinger
• [U-Boot] [PATCH] i2c: merge all i2c_reg_read() and i2c_reg_write() into inline functions   Mike Frysinger
• [U-Boot] [PATCH] i2c: merge all i2c_reg_read() and i2c_reg_write() into inline functions   Timur Tabi
• [U-Boot] [PATCH] i2c: merge all i2c_reg_read() and i2c_reg_write() into inline functions   Timur Tabi
• [U-Boot] [PATCH] i2c: merge all i2c_reg_read() and i2c_reg_write() into inline functions   Timur Tabi
• [U-Boot] [PATCH] i2c: merge all i2c_reg_read() and i2c_reg_write() into inline functions   Timur Tabi
• [U-Boot] [PATCH] improved strmhz()   Ilko Iliev
• [U-Boot] [PATCH] improved strmhz()   Wolfgang Denk
• [U-Boot] [PATCH] improved strmhz()   Ilko Iliev
• [U-Boot] [PATCH] improved strmhz()   Kumar Gala
• [U-Boot] [PATCH] improved strmhz()   Jerry Van Baren
• [U-Boot] [PATCH] improved strmhz()   Mike Frysinger
• [U-Boot] [PATCH] improved strmhz()   Wolfgang Denk
• [U-Boot] [PATCH] improved strmhz()   Stefan Roese
• [PATCH] iMX31: Add support to copy NAND Flash code to RAM   Alan Carvalho de Assis
• [PATCH] iMX31: Add support to iMX31PDK board boots from NAND Flash   Alan Carvalho de Assis
• [PATCH] iMX31: Reducing start.S size to let boot from NAND   Alan Carvalho de Assis
• [U-Boot] [PATCH] Initial support for Nomadik 8815 development board   Alessandro Rubini
• [U-Boot] [PATCH] Introduce CONFIG_4xx_HAS_OPB   Josh Boyer
• [U-Boot] [PATCH] Introduce CONFIG_4xx_HAS_OPB   Stefan Roese
• [U-Boot] [PATCH] Introduce CONFIG_4xx_HAS_OPB   Josh Boyer
• [U-Boot] [PATCH] jffs2: add buffer to cache flash accesses   Ilya Yanok
• [U-Boot] [PATCH] jffs2: add sector_size field to part_info structure   Wolfgang Denk
• [U-Boot] [PATCH] jffs2: add sector_size field to part_info structure   Ilya Yanok
• [U-Boot] [PATCH] jffs2: add sector_size field to part_info structure   Ilya Yanok
• [U-Boot] [PATCH] jffs2: cache data_crc results   Ilya Yanok
• [U-Boot] [PATCH] jffs2: cache data_crc results   Michael Lawnick
• [U-Boot] [PATCH] JFFS2: Eliminate compiler error when both NAND and OneNAND are enabled.   Alessandro Rubini
• [U-Boot] [PATCH] JFFS2: Eliminate compiler error when both NAND and OneNAND are enabled.   Scott Wood
• [U-Boot] [PATCH] JFFS2: Eliminate compiler error when both NAND and OneNAND are enabled.   Scott Wood
• [U-Boot] [PATCH] jffs2: fix searching for latest version in jffs2_1pass_list_inodes()   Ilya Yanok
• [U-Boot] [PATCH] jffs2: rewrite jffs2 scanning code based on Linux one   Ilya Yanok
• [U-Boot] [PATCH] jffs2: summary support   Ilya Yanok
• [U-Boot] [PATCH] lcd: Let the board code show board-specific info cleanup   Peter Tyser
• [U-Boot] [PATCH] lcd: print custom strings after the logo   Ilko Iliev
• [U-Boot] [PATCH] lcd: print custom strings after the logo   Stelian Pop
• [U-Boot] [PATCH] lcd: print custom strings after the logo   Ilko Iliev
• [U-Boot] [PATCH] lcd: print custom strings after the logo   Stelian Pop
• [U-Boot] [PATCH] lcd: print custom strings after the logo   Wolfgang Denk
• [U-Boot] [PATCH] lcd: print custom strings after the logo   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] lcd: print custom strings after the logo   Anatolij Gustschin
• [U-Boot] [PATCH] lcd: print custom strings after the logo   Haavard Skinnemoen
• [U-Boot] [PATCH] lcd: print custom strings after the logo   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] lcd: print custom strings after the logo   Haavard Skinnemoen
• [U-Boot] [PATCH] lcd: print custom strings after the logo   Wolfgang Denk
• [U-Boot] [PATCH] lcd: print custom strings after the logo   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] lib_ppc: Move trap_init to occur earlier   Becky Bruce
• [U-Boot] [PATCH] libfdt: Add function to explicitly expand aliases   Jon Loeliger
• [U-Boot] [PATCH] libfdt: Add function to explicitly expand aliases   Petri Lehtinen
• [U-Boot] [PATCH] libfdt: Add function to explicitly expand aliases   David Gibson
• [U-Boot] [PATCH] libfdt: Add function to explicitly expand aliases   David Gibson
• [U-Boot] [PATCH] libfdt: Add function to explicitly expand aliases   Jerry Van Baren
• [U-Boot] [PATCH] libfdt: Fix bug in fdt_subnode_offset_namelen()   Kumar Gala
• [U-Boot] [PATCH] libfdt: Fix bug in fdt_subnode_offset_namelen()   Jerry Van Baren
• [U-Boot] [PATCH] libfdt: Fix error in documentation for fdt_get_alias_namelen()   Jerry Van Baren
• [PATCH] libfdt: Use endian.h instead of asm/byteorder.h   Gerald Van Baren
• [U-Boot] [PATCH] mgcoge, mgsuvd: added support for the IVM EEprom.   Wolfgang Denk
• [U-Boot] [PATCH] mgcoge, mgsuvd: add DTT (LM75) support.   Wolfgang Denk
• [U-Boot] [PATCH] mgcoge, mgsuvd: add EEprom support.   Wolfgang Denk
• [U-Boot] [PATCH] mgcoge, mgsuvd: add I2C deblocking mechanism.   Wolfgang Denk
• [U-Boot] [PATCH] mgsuvd, mgcoge: added BOOTCOUNT feature.   Wolfgang Denk
• [U-Boot] [PATCH] mgsuvd: add common directory to Makefile.   Wolfgang Denk
• [U-Boot] [PATCH] MIMC200 board now uses CONFIG_DISABLE_CONSOLE   Mark Jackson
• [U-Boot] [PATCH] MIMC200 board now uses CONFIG_DISABLE_CONSOLE   Haavard Skinnemoen
• [U-Boot] [PATCH] move README.nios_CONFIG_SYS_NIOS_CPU to doc   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] Moved initialization of FCC Ethernet controller to cpu_eth_init   Ben Warren
• [U-Boot] [PATCH] Moved initialization of MPC8220 FEC to cpu_eth_init()   Ben Warren
• [U-Boot] [PATCH] Moved initialization of MPC8XX SCC to cpu_eth_init()   Ben Warren
• [U-Boot] [PATCH] Moved initialization of QE Ethernet controller to cpu_eth_init()   Ben Warren
• [U-Boot] [PATCH] mpc8313erdb: Document NAND boot.   Scott Wood
• [U-Boot] [PATCH] mpc83xx pci: Round up memory size in inbound window.   Scott Wood
• [U-Boot] [PATCH] mpc83xx pci: Round up memory size in inbound window.   Kim Phillips
• [U-Boot] [PATCH] mpc83xx: add ELBC NAND support for the MPC837XEMDSboards   Liu Dave-R63238
• [U-Boot] [PATCH] mpc83xx: add ELBC NAND support for the MPC837XEMDS boards   Anton Vorontsov
• [U-Boot] [PATCH] mpc83xx: add ELBC NAND support for the MPC837XEMDSboards   Kim Phillips
• [U-Boot] [PATCH] mpc83xx: add support for switching between USB Host/Function for MPC837XEMDS   Anton Vorontsov
• [U-Boot] [PATCH] mpc83xx: fix PCI scan hang on the standaloneMPC837xE-MDS boards   Anton Vorontsov
• [U-Boot] [PATCH] mpc83xx: fix PCI scan hang on the standaloneMPC837xE-MDS boards   Liu Dave-R63238
• [U-Boot] [PATCH] mpc83xx: fix PCI scan hang on the standalone MPC837xE-MDS boards   Anton Vorontsov
• [U-Boot] [PATCH] mpc83xx: fix PCI scan hang on the standalone MPC837xE-MDS boards   Kim Phillips
• [U-Boot] [PATCH] mpc83xx: Fix the wrong comment.   Selvamuthukumar
• [U-Boot] [PATCH] mpc83xx: Fix the wrong comment.   Kim Phillips
• [U-Boot] [PATCH] mpc83xx: mpc8360emds: rework LBC SDRAM setup   Wolfgang Denk
• [U-Boot] [PATCH] mpc83xx: mpc8360emds: rework LBC SDRAM setup   Kim Phillips
• [U-Boot] [PATCH] mpc83xx: mpc8360emds: rework LBC SDRAM setup   Kim Phillips
• [U-Boot] [PATCH] MPC8572DS: Fix compile warnings   Kumar Gala
• [U-Boot] [PATCH] MPC8572DS: Fix compile warnings   Andy Fleming
• [U-Boot] [PATCH] mpc8641: Make PCI and RIO mutually exclusive, fix non-PCI build   Becky Bruce
• [U-Boot] [PATCH] mpc8641: Stop supporting non-PCI_PNP configs   Becky Bruce
• [U-Boot] [PATCH] mpc86xx: use r4 instead of r2 in lock_ram_in_cache and unlock_ram_in_cache   Wolfgang Denk
• [U-Boot] [PATCH] mpc86xx: use r4 instead of r2 in lock_ram_in_cache and unlock_ram_in_cache   Wolfgang Denk
• [U-Boot] [PATCH] mtd/dataflash.c: fix a problem with the last partition   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] mtd/dataflash.c: fix a problem with the last partition   Ilko Iliev
• [U-Boot] [PATCH] mtd/dataflash.c: fix a problem with the last partition   Ilko Iliev
• [U-Boot] [PATCH] NAND Send RESET before initial READID   David George
• [U-Boot] [PATCH] NAND Send RESET before initial READID   Scott Wood
• [U-Boot] [PATCH] NAND: Align right column of the shorthelp with other commands.   Scott Wood
• [U-Boot] [PATCH] NAND: Reset chip on power-up   Scott Wood
• [U-Boot] [PATCH] NAND: sync with 2.6.27   Scott Wood
• [PATCH] net: add PCINet driver   Ira W. Snyder
• [U-Boot] [PATCH] net: Move initialization of Au1x00 SoC ethernet MAC to cpu_eth_init   Ben Warren
• [U-Boot] [PATCH] Olimex SAM9-L9260 board support   Cristian Birsan
• [U-Boot] [PATCH] Olimex SAM9-L9260 board support   Wolfgang Denk
• [U-Boot] [PATCH] Olimex SAM9-L9260 board support   Cristian Birsan
• [U-Boot] [PATCH] Olimex SAM9-L9260 board support   Wolfgang Denk
• [U-Boot] [PATCH] Olimex SAM9-L9260 board support   Cristian Birsan
• [U-Boot] [PATCH] Olimex SAM9-L9260 board support   Wolfgang Denk
• [U-Boot] [PATCH] Olimex SAM9-L9260 board support   Cristian Birsan
• [U-Boot] [PATCH] Olimex SAM9-L9260 board support   Cristian Birsan
• [U-Boot] [PATCH] Olimex SAM9-L9260 board support   Wolfgang Denk
• [U-Boot] [PATCH] Olimex SAM9-L9260 board support   Cristian Birsan
• [U-Boot] [PATCH] Olimex SAM9-L9260 board support   Cristian Birsan
• [U-Boot] [PATCH] Olimex SAM9-L9260 board support   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] Olimex SAM9-L9260 board support   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] Olimex SAM9-L9260 board support   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] Olimex SAM9-L9260 board support   Wolfgang Denk
• [U-Boot] [PATCH] Olimex SAM9-L9260 board support   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] pci/fsl_pci_init: Enable inbound PCI config cycles   Peter Tyser
• [U-Boot] [PATCH] pci/fsl_pci_init: Removed a bunch pointless trailing backslashes.   Kumar Gala
• [U-Boot] [PATCH] pci/fsl_pci_init: Removed a bunch pointless trailing backslashes.   Andy Fleming
• [U-Boot] [PATCH] pci: Allow for PCI addresses to be 64-bit   Kumar Gala
• [U-Boot] [PATCH] pci: Allow for PCI addresses to be 64-bit   Wolfgang Denk
• [U-Boot] [PATCH] pci: Allow for PCI addresses to be 64-bit   Kumar Gala
• [U-Boot] [PATCH] pci: Treat all PCI bus addresses as 64-bit   Kumar Gala
• [U-Boot] [PATCH] pci: Treat all PCI bus addresses as 64-bit   Wolfgang Denk
• [U-Boot] [PATCH] pci: Treat all PCI bus addresses as 64-bit   Jerry Van Baren
• [U-Boot] [PATCH] pci: Treat all PCI bus addresses as 64-bit   Kumar Gala
• [U-Boot] [PATCH] pci: Treat all PCI bus addresses as 64-bit   Kumar Gala
• [U-Boot] [PATCH] pci: Treat all PCI bus addresses as 64-bit   Wolfgang Denk
• [U-Boot] [PATCH] pci: Treat all PCI bus addresses as 64-bit   Wolfgang Denk
• [U-Boot] [PATCH] pci: Treat all PCI bus addresses as 64-bit   Kumar Gala
• [U-Boot] [PATCH] pixis do not print long help if not configured   Ed Swarthout
• [U-Boot] [PATCH] pixis do not print long help if not configured   Andy Fleming
• [U-Boot] [PATCH] powerpc 86xx: Handle CCSR relocation earlier   Becky Bruce
• [U-Boot] [PATCH] powerpc: fix pci window initialization to work with > 4GB DRAM   Becky Bruce
• [U-Boot] [PATCH] powerpc: fix pci window initialization to work with > 4GB DRAM   Kumar Gala
• [U-Boot] [PATCH] powerpc: fix pci window initialization to work with > 4GB DRAM   Andy Fleming
• [U-Boot] [PATCH] ppc4xx: Add 1.0 & 1.066 GHz to canyonlands bootstrap command for PLL setup   Stefan Roese
• [U-Boot] [PATCH] ppc4xx: Add GDSys neo 405EP board support   Dirk Eibach
• [U-Boot] [PATCH] ppc4xx: Add GDSys neo 405EP board support   Stefan Roese
• [U-Boot] [PATCH] ppc4xx: Clean up PMC440 header   matthias.fuchs at esd-electronics.com
• [U-Boot] [PATCH] ppc4xx: Correctly configure the GPIO pin muxing on Arches   Stefan Roese
• [U-Boot] [PATCH] ppc4xx: Correctly setup ranges property in ebc node   Stefan Roese
• [U-Boot] [PATCH] ppc4xx: Correctly setup ranges property in ebc node   Stefan Roese
• [U-Boot] [PATCH] ppc4xx: Disable DDR2 autocalibration on Kilauea for now   Stefan Roese
• [U-Boot] [PATCH] ppc4xx: Fix esd loadpci command   matthias.fuchs at esd-electronics.com
• [U-Boot] [PATCH] ppc4xx: Fix PMC440 BSP commands   matthias.fuchs at esd-electronics.com
• [U-Boot] [PATCH] ppc4xx: Fix spelling error in MAINTAINERS file   Stefan Roese
• [U-Boot] [PATCH] ppc4xx: Generic architecture for xilinx ppc405(v3)   Ricardo
• [U-Boot] [PATCH] ppc4xx: Generic architecture for xilinx ppc405(v3)   Stefan Roese
• [U-Boot] [PATCH] ppc4xx: Generic architecture for xilinx ppc405   Ricardo Ribalda Delgado
• [U-Boot] [PATCH] ppc4xx: Generic architecture for xilinx ppc405   Stefan Roese
• [U-Boot] [PATCH] ppc4xx: Generic architecture for xilinx ppc405   Ricardo Ribalda Delgado
• [U-Boot] [PATCH] ppc4xx: Generic architecture for xilinx ppc405 (v2)   Stefan Roese
• [U-Boot] [PATCH] ppc4xx: Generic architecture for xilinx ppc405 (v2)   Ricardo Ribalda Delgado
• [U-Boot] [PATCH] ppc4xx: Generic architecture for xilinx ppc405(v3)   Ricardo Ribalda Delgado
• [U-Boot] [PATCH] ppc4xx: Handle other board variant in PMC440 FPGA code   matthias.fuchs at esd-electronics.com
• [U-Boot] [PATCH] ppc4xx: Merge Neo board port: CFG_ -> CONFIG_SYS_   Wolfgang Denk
• [U-Boot] [PATCH] ppc4xx: Merge Neo board port: CFG_ -> CONFIG_SYS_   Stefan Roese
• [U-Boot] [PATCH] ppc4xx: Merge Netstal board ports: CFG_ -> CONFIG_SYS_   Stefan Roese
• [U-Boot] [PATCH] ppc4xx: Merge Netstal board ports: CFG_ -> CONFIG_SYS_   Wolfgang Denk
• [U-Boot] [PATCH] ppc4xx: Merge Netstal board ports: CFG_ -> CONFIG_SYS_   Stefan Roese
• [U-Boot] [PATCH] ppc4xx: merge xilinx-ppc440 and xilinx-ppc405 cfg   Stefan Roese
• [U-Boot] [PATCH] ppc4xx: merge xilinx-ppc440 and xilinx-ppc405 cfg   Ricardo Ribalda Delgado
• [U-Boot] [PATCH] ppc4xx: New board avnet fx12 minimodule   Georg Schardt
• [U-Boot] [PATCH] ppc4xx: New board avnet fx12 minimodule   Stefan Roese
• [U-Boot] [PATCH] ppc4xx: New board avnet fx12 minimodule <v2>   Georg Schardt
• [U-Boot] [PATCH] ppc4xx: New board avnet fx12 minimodule <v2>   Stefan Roese
• [U-Boot] [PATCH] ppc4xx: New board avnet fx12 minimodule <v2>   Jerry Van Baren
• [U-Boot] [PATCH] ppc4xx: New board avnet fx12 minimodule <v2>   Georg Schardt
• [U-Boot] [PATCH] ppc4xx: New board avnet fx12 minimodule <v2>   Jerry Van Baren
• [U-Boot] [PATCH] ppc4xx: New board avnet fx12 minimodule <v2>   Stefan Roese
• [U-Boot] [PATCH] ppc4xx: New board avnet fx12 minimodule <v2>   Georg Schardt
• [U-Boot] [PATCH] ppc4xx: New board avnet fx12 minimodule <v2>   Stefan Roese
• [U-Boot] [PATCH] ppc4xx: New board avnet fx12 minimodule <v3>   Georg Schardt
• [U-Boot] [PATCH] ppc4xx: New board avnet fx12 minimodule <v3>   Jerry Van Baren
• [U-Boot] [PATCH] ppc4xx: PPC44x MQ initialization   Stefan Roese
• [U-Boot] [PATCH] ppc4xx: PPC44x MQ initialization   Wolfgang Denk
• [U-Boot] [PATCH] ppc4xx: Update configs for Netstal boards   Niklaus Giger
• [U-Boot] [PATCH] ppc4xx: Update configs for Netstal boards   Stefan Roese
• [U-Boot] [PATCH] ppc4xx: Update PMC440 board configuration   matthias.fuchs at esd-electronics.com
• [U-Boot] [PATCH] ppc4xx: Update PMC440 board support   matthias.fuchs at esd-electronics.com
• [U-Boot] [PATCH] ppc: Fix compile warnings when !CONFIG_OF_LIBFDT   Peter Tyser
• [U-Boot] [PATCH] r8a66597-hcd: fix cannot use external hub   Yoshihiro Shimoda
• [U-Boot] [PATCH] Red Black Tree support   Kyungmin Park
• [U-Boot] [PATCH] Red Black Tree support   Wolfgang Denk
• [U-Boot] [PATCH] Red Black Tree support   Amit Kumar Sharma
• [U-Boot] [PATCH] Red Black Tree support   Kyungmin Park
• [U-Boot] [PATCH] Red Black Tree support v2   Kyungmin Park
• [U-Boot] [PATCH] Red Black Tree support v2   Wolfgang Denk
• [U-Boot] [PATCH] Remove CFG_EEPROM_PAGE* dependencies for temperature sensors   Wolfgang Denk
• [U-Boot] [PATCH] Remove last reference to CONFIG_MPC85xx_FEC   Ben Warren
• [U-Boot] [PATCH] Remove last reference to CONFIG_MPC85xx_FEC   Andy Fleming
• [U-Boot] [PATCH] Remove last reference to CONFIG_MPC85xx_FEC   Andy Fleming
• [U-Boot] [PATCH] Remove last reference to CONFIG_MPC85xx_FEC   Ben Warren
• [U-Boot] [PATCH] Remove unused CFG_EEPROM_PAGE_WRITE_ENABLE references   Wolfgang Denk
• [U-Boot] [PATCH] Remove unwanted ';' at end of define.   Selvamuthukumar
• [PATCH] Remove unwanted ';' at end of define.   Selvamuthukumar
• [U-Boot] [PATCH] Remove unwanted ';' at end of define.   Kim Phillips
• [U-Boot] [PATCH] Remove unwanted ';' at end of define.   Wolfgang Denk
• [U-Boot] [PATCH] serial: add support for the OMRPv2 simple wishbone UART   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] serial: add support for the OMRPv2 simple wishbone UART   Wolfgang Denk
• [U-Boot] [PATCH] serial: add support for the OMRPv2 simple wishbone UART   Florian Fainelli
• [U-Boot] [PATCH] sh: Fix cannot execute a stand-alone application   Nobuhiro Iwamatsu
• [U-Boot] [PATCH] sh: rsk7203: Add smc911x driver support to board config file   Nobuhiro Iwamatsu
• [U-Boot] [PATCH] TQM5200: enable support for ATAPI devices   Wolfgang Denk
• [U-Boot] [PATCH] TQM8260: environment in flash instead EEPROM, baudrate 115k   Wolfgang Denk
• [U-Boot] [PATCH] TQM8260: environment in flash instead EEPROM, baudrate 115k   Wolfgang Denk
• [U-Boot] [PATCH] TQM8260: environment in flash instead EEPROM, baudrate 115k   Wolfgang Denk
• [U-Boot] [PATCH] TQM8260: environment in flash instead EEPROM, baudrate 115k   Heiko Schocher
• [U-Boot] [PATCH] TQM8260: use CFI flash driver instead of custom driver.   Wolfgang Denk
• [U-Boot] [patch] U-Boot Firetux board support   Juergen Schoew
• [U-Boot] [patch] U-Boot Firetux board support   Scott Wood
• [U-Boot] [patch] U-Boot Firetux board support   Peter Tyser
• [U-Boot] [PATCH] USB: Remove LUN number from CDB   Abraham, Thomas
• [U-Boot] [PATCH] Use correct kzalloc   Kyungmin Park
• [U-Boot] [PATCH] Use correct kzalloc   Wolfgang Denk
• [U-Boot] [PATCH] Wait till UPM completes the write to array.   Selvamuthukumar
• [U-Boot] [PATCH] Wait till UPM completes the write to array.   Selvamuthukumar
• [U-Boot] [PATCH] Wait till UPM completes the write to array.   Kim Phillips
• [U-Boot] [PATCH] xilinx_emaclite buffer overrun   Clive Stubbings
• [U-Boot] [PATCH] xilinx_emaclite buffer overrun   Ben Warren
• [U-Boot] [PATCH]: FFS/UFS filesystems support   Stanislav Sedov
• [U-Boot] [PATCH][for v2008.10] 85xx: Fix compile warning   Kumar Gala
• [U-Boot] [PATCH][for v2008.10] 85xx: Fix compile warning   Wolfgang Denk
• [U-Boot] [PATCH][iMX31] Change to use "do_div" macro   Tomohiro Masubuchi
• [U-Boot] [PATCH][iMX31] Change to use "do_div" macro   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH][Re-Submit-again2] Custom AFEB9260 board support   Sergey Lapin
• [U-Boot] [PATCH][Re-Submit-again2] Custom AFEB9260 board support   Sergey Lapin
• [U-Boot] [PATCH][Re-Submit-again2] Custom AFEB9260 board support   Sergey Lapin
• [U-Boot] [PATCH][Re-Submit-again] Custom AFEB9260 board support   Sergey Lapin
• [U-Boot] [PATCH][Re-Submit-again] Custom AFEB9260 board support   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH][Re-Submit-again] Custom AFEB9260 board support   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH][Re-Submit2] Custom AFEB9260 board support   Sergey Lapin
• [U-Boot] [PATCH][Re-submit] Hardware watchdog support for AT91SAM9260 CPU   Wolfgang Denk
• [U-Boot] [PATCH][RESEND] net: ne2000: Divided a function of NE2000 driver   Wolfgang Denk
• [U-Boot] [PATCH][RESEND] net: ne2000: Divided a function of NE2000 driver   Ben Warren
• [U-Boot] [PATCH][RFC] bootm: Added CONFIG_BOOTM_{LINUX, NETBSD, RTEMS}   Kumar Gala
• [U-Boot] [PATCH][RFC] bootm: Added CONFIG_BOOTM_{LINUX, NETBSD, RTEMS}   Wolfgang Denk
• [U-Boot] [PATCH][RFC] bootm: Added CONFIG_BOOTM_{LINUX, NETBSD, RTEMS}   Kumar Gala
• [U-Boot] [PATCH][RFC] bootm: Added CONFIG_BOOTM_{LINUX, NETBSD, RTEMS}   Wolfgang Denk
• [U-Boot] [PATCH][RFC] bootm: Added CONFIG_BOOTM_{LINUX, NETBSD, RTEMS}   Kumar Gala
• [U-Boot] [PATCH][RFC] bootm: Added CONFIG_BOOTM_{LINUX, NETBSD, RTEMS}   Mike Frysinger
• [U-Boot] [PATCH][RFC] bootm: Added CONFIG_BOOTM_{LINUX, NETBSD, RTEMS}   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH][RFC] bootm: Added CONFIG_BOOTM_{LINUX, NETBSD, RTEMS}   Jerry Van Baren
• [U-Boot] [PATCH][RFC] bootm: Added CONFIG_BOOTM_{LINUX, NETBSD, RTEMS}   Jerry Van Baren
• [U-Boot] [PATCH][RFC] Update U-Boot's build timestamp on every compile   Peter Tyser
• [U-Boot] [PATCH][RFC] Update U-Boot's build timestamp on every compile   Peter Tyser
• [U-Boot] [PATCH][RFC] Update U-Boot's build timestamp on every compile   Peter Tyser
• [U-Boot] [PATCH][RFC] Update U-Boot's build timestamp on every compile   Peter Tyser
• [U-Boot] [PATCH][RFC] Update U-Boot's build timestamp on every compile   Peter Tyser
• [U-Boot] [PATCH][RFC] Update U-Boot's build timestamp on every compile   Jerry Van Baren
• [U-Boot] [PATCH][RFC] Update U-Boot's build timestamp on every compile   Peter Tyser
• [U-Boot] [PATCH][RFC] Update U-Boot's build timestamp on every compile   Wolfgang Denk
• [U-Boot] [PATCH][RFC] Update U-Boot's build timestamp on every compile   Stefan Roese
• [U-Boot] [PATCH][RFC] Update U-Boot's build timestamp on every compile   Wolfgang Denk
• [U-Boot] [PATCH][RFC] Update U-Boot's build timestamp on every compile   Wolfgang Denk
• [U-Boot] [PATCH][RFC] Update U-Boot's build timestamp on every compile   Wolfgang Denk
• [U-Boot] [PATCH][RFC] Update U-Boot's build timestamp on every compile   Andy Fleming
• [U-Boot] [PATCH][RFC] Update U-Boot's build timestamp on every compile   Kim Phillips
• [U-Boot] [PATCH]v2: Fixed lineendings in tools/img2brec.sh   Niklaus Giger
• [U-Boot] [PATCH]v2: Fixed lineendings in tools/img2brec.sh   Wolfgang Denk
• [U-Boot] [PATCHv2][iMX31] Change to use "do_div" macro   Tomohiro Masubuchi
• [U-Boot] [POWERPC v2] mgcoge: Second Flash on CS5 not on CS1   Heiko Schocher
• [U-Boot] [POWERPC v2] mgcoge: Second Flash on CS5 not on CS1   Wolfgang Denk
• [U-Boot] [POWERPC v2] mgsuvd: fix coding style   Heiko Schocher
• [U-Boot] [POWERPC v2] mgsuvd: fix compiler warning when using soft_i2c driver   Heiko Schocher
• [U-Boot] [POWERPC v2] mgsuvd: fix compiler warning when using soft_i2c driver   Wolfgang Denk
• [U-Boot] [POWERPC v3] mgsuvd: fix compiler warning when using soft_i2c driver   Heiko Schocher
• [U-Boot] [POWERPC v4] mgsuvd: fix compiler warning when using soft_i2c driver   Heiko Schocher
• [U-Boot] [POWERPC v4] mgsuvd: fix compiler warning when using soft_i2c driver   Wolfgang Denk
• [U-Boot] [POWERPC] i2c: Fix help text for i2c reset command.   Heiko Schocher
• [U-Boot] [POWERPC] i2c: Fix help text for i2c reset command.   Wolfgang Denk
• [U-Boot] [POWERPC] mgcoge, mgsuvd: add I2C support.   Wolfgang Denk
• [U-Boot] [POWERPC] mgcoge, mgsuvd: cleanups   Heiko Schocher
• [U-Boot] [POWERPC] mgcoge, mgsuvd: cleanups   Wolfgang Denk
• [U-Boot] [POWERPC] mgcoge, mgsuvd: extract more common code   Heiko Schocher
• [U-Boot] [POWERPC] mgcoge, mgsuvd: extract more common code   Wolfgang Denk
• [U-Boot] [POWERPC] mgcoge, mgsuvd: fix out-of-tree build error.   Heiko Schocher
• [U-Boot] [POWERPC] mgcoge, mgsuvd: fix out-of-tree build error.   Wolfgang Denk
• [U-Boot] [POWERPC] mgcoge, mgsuvd: use in_*/out_* accesors   Heiko Schocher
• [U-Boot] [POWERPC] mgcoge, mgsuvd: use in_*/out_* accesors   Wolfgang Denk
• [U-Boot] [POWERPC] mgcoge: add redundant environment sector   Heiko Schocher
• [U-Boot] [POWERPC] mgcoge: added CONFIG_FIT to support the new u-boot image format   Wolfgang Denk
• [U-Boot] [POWERPC] mgcoge: added CONFIG_FIT to support the new u-boot image format   Heiko Schocher
• [U-Boot] [POWERPC] mgcoge: correct init of the UPIOx   Heiko Schocher
• [U-Boot] [POWERPC] mgcoge: correct init of the UPIOx   Wolfgang Denk
• [U-Boot] [POWERPC] mgcoge: Second Flash on CS5 not on CS1   Heiko Schocher
• [U-Boot] [POWERPC] mgcoge: Second Flash on CS5 not on CS1   Wolfgang Denk
• [U-Boot] [POWERPC] mgsuvd: fix codingstyle   Heiko Schocher
• [U-Boot] [POWERPC] mgsuvd: fix codingstyle   Wolfgang Denk
• [U-Boot] [POWERPC] mgsuvd: fix compiler warning when using soft_i2c driver   Wolfgang Denk
• [U-Boot] [POWERPC] mgsuvd: fix compiler warning when using soft_i2c driver   Heiko Schocher
• [U-Boot] [POWERPC] mgsuvd: remove unused defines in config file.   Heiko Schocher
• [U-Boot] [POWERPC] mgsuvd: update size of environment   Heiko Schocher
• [U-Boot] [POWERPC] mgsuvd: update size of environment   Wolfgang Denk
• [U-Boot] [POWERPC] mgsuvd: update size of environment   Wolfgang Denk
• [U-Boot] [ppc4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git   Stefan Roese
• [U-Boot] [ppc4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git   Wolfgang Denk
• [U-Boot] [ppc4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git   Stefan Roese
• [U-Boot] [ppc4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git   Wolfgang Denk
• [U-Boot] [ppc4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git   Stefan Roese
• [U-Boot] [ppc4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git   Wolfgang Denk
• [U-Boot] [ppc4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git   Stefan Roese
• [U-Boot] [RFC][PATCH 0/3] New i386 board (includes code relocation)   Wolfgang Denk
• [U-Boot] [RFC][PATCH 2a/3] New i386 board (includes code relocation)   Wolfgang Denk
• [U-Boot] [RFC][PATCH 2b/3] New i386 board (includes code relocation)   Wolfgang Denk
• [U-Boot] [RFC][PATCH v4] bootm: Add sub commands   Kumar Gala
• [U-Boot] [RFC][PATCH v4] bootm: Add sub commands   Jerry Van Baren
• [U-Boot] [RFC][PATCH v4] bootm: Add sub commands   Kumar Gala
• [U-Boot] [RFC][PATCH v4] bootm: Add sub commands   Jerry Van Baren
• [U-Boot] [RFC][PATCH v4] bootm: Add sub commands   Jerry Van Baren
• [U-Boot] [RFC][PATCH v4] bootm: Add sub commands   Kumar Gala
• [U-Boot] [RFC][PATCH v4] bootm: Add sub commands   Kumar Gala
• [U-Boot] [RFC][PATCH v4] bootm: Add sub commands   Jerry Van Baren
• [U-Boot] [RFC][PATCH v4] bootm: Add sub commands (sequence of commands to replicate bootm)   Kumar Gala
• [U-Boot] [U-Boot-Users] [PATCH] [resubmit] AX88180: new gigabit network driver   Wolfgang Denk
• [U-Boot] [U-Boot-Users] [PATCH] [resubmit] AX88180: new gigabit network driver   Mike Frysinger
• [U-Boot] [U-Boot-Users] [PATCH] [resubmit] AX88180: new gigabit network driver   Ben Warren
• [U-Boot] [U-Boot-Users] [PATCH] ads5121: support for running from memory   Nikita V. Youshchenko
• [U-Boot] [U-Boot-Users] [PATCH] ads5121: support for running from memory   John Rigby
• [U-Boot] [U-Boot-Users] [PATCH] ads5121: support for running from memory   Nikita V. Youshchenko
• [U-Boot] [U-Boot-Users] [PATCH] asm-arm/sizes.h clean-up   Wolfgang Denk
• [U-Boot] [U-Boot-Users] [PATCH] cmd_spi: remove broken signed casting for display   Wolfgang Denk
• [U-Boot] [U-Boot-Users] [PATCH] strings cmd: drop old CONFIG_CFG_STRINGS define   Wolfgang Denk
• [U-Boot] [U-Boot-Users] Compilation problem for TI3430 board.   Jerry Van Baren
• [U-Boot] [U-Boot-Users] Compilation problem for TI3430 board.   Radha Krishna
• [U-Boot] [U-Boot-Users] Compilation problem for TI3430 board.   Radha Krishna
• [U-Boot] [U-Boot-Users] Compilation problem for TI3430 board.   Wolfgang Denk
• [U-Boot] [U-Boot-Users] Compilation problem for TI3430 board.   Nishanth Menon
• [U-Boot] [U-Boot-Users] Compilation problem for TI3430 board.   Radha Krishna
• [U-Boot] [U-Boot-Users] DNS support in U-Boot   Ben Warren
• [U-Boot] [U-Boot-Users] DNS support in U-Boot   Jerry Van Baren
• [U-Boot] [U-Boot-Users] Freescale MPC8349EMDS BCSR corruption   David Hawkins
• [U-Boot] [U-Boot-Users] Freescale MPC8349EMDS BCSR corruption   Liu Dave-R63238
• [U-Boot] [U-Boot-V2] [Patch ] ARM:OMAP:SDP3430: fix SDRC configuration   Kandasamy, ShankarGanesh
• [U-Boot] [U-boot] [PATCHv2 1/2] NET: QE: UEC: Make uec_miiphy_read() and uec_miiphy_write() use the devname arg.   richardretanubun
• [U-Boot] [U-boot] [PATCHv2 1/2] NET: QE: UEC: Make uec_miiphy_read() and uec_miiphy_write() use the devname arg.   Ben Warren
• [U-Boot] [U-boot] Export functions using Jumptable in Standalone application   Wolfgang Denk
• [U-Boot] [U-boot] Export functions using Jumptable in Standalone application   Wolfgang Denk
• [U-Boot] [U-boot] Export functions using Jumptable in Standalone application   Nagesh.ML
• [U-Boot] [U-boot] Export functions using Jumptable in Standalone application   Nagesh.ML
• [U-Boot] [U-boot] Export functions using Jumptable in Standalone application   Nagesh.ML
• [U-Boot] [UBI] git pull request   Kyungmin Park
• [U-Boot] [UBI] git pull request   Wolfgang Denk
• [U-Boot] [UBI] git pull request   Kyungmin Park
• [U-Boot] [UBI] git pull request   Kyungmin Park
• [U-Boot] [UBI] git pull request   Wolfgang Denk
• [U-Boot] [UBoot] Hows to boot Linux Kernel from USB   thaoth
• [U-Boot] [UBoot] Hows to boot Linux Kernel from USB   Nobuhiro Iwamatsu
• [U-Boot] [UBoot] Hows to boot Linux Kernel from USB   thaoth
• [U-Boot] [UBoot] Hows to boot Linux Kernel from USB   Albert ARIBAUD
• [U-Boot] [UBoot] Hows to boot Linux Kernel from USB   Nobuhiro Iwamatsu
• [U-Boot] [UBoot] Hows to boot Linux Kernel from USB   michael
• [U-Boot] [UBoot] Hows to boot Linux Kernel from USB   Wolfgang Denk
• [U-Boot] [UBoot] Hows to boot Linux Kernel from USB   michael
• [U-Boot] [UBoot] Hows to boot Linux Kernel from USB   thaoth
• [U-Boot] [UBoot] Hows to boot Linux Kernel from USB   thaoth
• [U-Boot] [UBoot] Hows to boot Linux Kernel from USB   thaoth
• [U-Boot] [UBoot] Hows to boot Linux Kernel from USB   michael
• [U-Boot] [UBoot] Hows to boot Linux Kernel from USB   thaoth
• [U-Boot] [USB] pull request   Markus Klotzbücher
• [U-Boot] [USB] pull request   Wolfgang Denk
• [U-Boot] Adding a new board   Ron Madrid
• [U-Boot] Adding a new board   Scott Wood
• [U-Boot] Adding a new board   Ron Madrid
• [U-Boot] Adding a new board   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] amcc kilauea odd crashes   Markus Klotzbücher
• [U-Boot] amcc kilauea odd crashes   Stefan Roese
• [U-Boot] amcc kilauea odd crashes   Wolfgang Denk
• [U-Boot] amcc kilauea odd crashes   Stefan Roese
• [U-Boot] amcc kilauea odd crashes   Wolfgang Denk
• [U-Boot] amcc kilauea odd crashes   Stefan Roese
• [U-Boot] amcc kilauea odd crashes   Markus Klotzbücher
• [U-Boot] amcc kilauea odd crashes   Stefan Roese
• [U-Boot] amcc kilauea odd crashes   prodyut hazarika
• [U-Boot] amcc kilauea odd crashes   Markus Klotzbücher
• [U-Boot] amcc kilauea odd crashes   Adam Graham
• [U-Boot] amcc kilauea odd crashes   Adam Graham
• [U-Boot] amcc kilauea odd crashes   Adam Graham
• [U-Boot] amcc kilauea odd crashes   Adam Graham
• [U-Boot] amcc kilauea odd crashes   Stefan Roese
• [U-Boot] Antwort: Re: Antwort: Re: Antwort: Re: PATCH: IXP465 support and some IXP4xx rework, Sidewinder board support   Wolfgang Denk
• [U-Boot] Antwort: Re: Antwort: Re: Antwort: Re: PATCH: IXP465 support and some IXP4xx rework, Sidewinder board support   h.sattler at erhardt-leimer.com
• [U-Boot] Antwort: Re: Antwort: Re: Antwort: Re: PATCH: IXP465 support and some IXP4xx rework, Sidewinder board support   h.sattler at erhardt-leimer.com
• [U-Boot] Antwort: Re: Antwort: Re: PATCH: IXP465 support and some IXP4xx rework, Sidewinder board support   h.sattler at erhardt-leimer.com
• [U-Boot] Antwort: Re: Antwort: Re: PATCH: IXP465 support and some IXP4xx rework, Sidewinder board support   michael
• [U-Boot] Antwort: Re: PATCH: IXP465 support and some IXP4xx rework, Sidewinder board support   h.sattler at erhardt-leimer.com
• [U-Boot] Antwort: Re: PATCH: IXP465 support and some IXP4xx rework, Sidewinder board support   michael
• [U-Boot] Arm Pull request   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] ARM Pull Request   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] ARM Pull Request   Wolfgang Denk
• [U-Boot] ARM/Versatile - bootup   Roman Mashak
• [U-Boot] AT91SAM9260 and Micrel KSZ8041   Kevin Greer
• [U-Boot] AT91SAM9260 and Micrel KSZ8041   Ing.G.Morandi (Portatile)
• [U-Boot] Atmel AT91RM9200: U-Boot refuses to copy to a particular sector of flash memory   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] Atmel AT91RM9200: U-Boot refuses to copy to a particular sector of flash memory   7words.sg at gmail.com
• [U-Boot] Atmel AT91RM9200: U-Boot refuses to copy to a particular sector of flash memory   Ki Chi Leung
• [U-Boot] Automatic software updates in U-Boot -- version 2   Bartlomiej Sieka
• [U-Boot] Automatic software updates in U-Boot -- version 2   Wolfgang Denk
• [U-Boot] Automatic software updates in U-Boot -- version 2   Bartlomiej Sieka
• [U-Boot] Automatic software updates in U-Boot -- version 2   Wolfgang Denk
• [U-Boot] Automatic software updates in U-Boot -- version 2   Wolfgang Denk
• [U-Boot] Automatic software updates in U-Boot -- version 2   Bartlomiej Sieka
• [U-Boot] booting the kernel   Mathieu Dube
• [U-Boot] booting the kernel   Jerry Van Baren
• [U-Boot] booting the kernel   Roman Mashak
• [U-Boot] Can u-boot load WinCE kernel image?   章杰
• [U-Boot] Can't connect to PHY, BCM5461   Simon Boman
• [U-Boot] Can't connect to PHY, BCM5461   Jerry Van Baren
• [U-Boot] Can't connect to PHY, BCM5461   Simon Boman
• [U-Boot] Can't connect to PHY, BCM5461   Jerry Van Baren
• [U-Boot] Can't connect to PHY, BCM5461   Simon Boman
• [U-Boot] Can't connect to PHY, BCM5461   Simon Boman
• [U-Boot] Cannot enable interrupts Olimex SAM9-L9260   Björn Saläng
• [U-Boot] Cannot enable interrupts Olimex SAM9-L9260   Wolfgang Denk
• [U-Boot] Cannot enable interrupts Olimex SAM9-L9260   Björn Saläng
• [U-Boot] Cannot enable interrupts Olimex SAM9-L9260   Wolfgang Denk
• [U-Boot] Cannot enable interrupts Olimex SAM9-L9260   Björn Saläng
• [U-Boot] CFI Driver Problem: flash not ready   Wolfgang Denk
• [U-Boot] CFI Driver Problem: flash not ready   Scott McNutt
• [U-Boot] CFI Driver Problem: flash not ready   Wolfgang Denk
• [U-Boot] CFI Driver Problem: flash not ready   stefano babic
• [U-Boot] CFI Driver Problem: flash not ready   Ross Morley
• [U-Boot] CFI Driver Problem: flash not ready   Wolfgang Denk
• [U-Boot] code for DDR   kishore choudhari
• [U-Boot] code for DDR   Fabio Estevam
• [U-Boot] code for DDR   kishore choudhari
• [U-Boot] Compilation problem for TI3430 board.   Radha Krishna
• [U-Boot] Custodian update   Wolfgang Denk
• [U-Boot] Custodian update   Jens Gehrlein
• [U-Boot] Custodian update   Wolfgang Denk
• [U-Boot] CUSTODIANS: Final boarding call for flight 2008-10   Wolfgang Denk
• [U-Boot] CUSTODIANS: Final boarding call for flight 2008-10   Shinya Kuribayashi
• [U-Boot] CUSTODIANS: Final boarding call for flight 2008-10   Wolfgang Denk
• [U-Boot] CUSTODIANS: Final boarding call for flight 2008-10   Remy Bohmer
• [U-Boot] CUSTODIANS: Final boarding call for flight 2008-10   Remy Bohmer
• [U-Boot] CUSTODIANS: Final boarding call for flight 2008-10   Wolfgang Denk
• [U-Boot] CUSTODIANS: Final boarding call for flight 2008-10   Wolfgang Denk
• [U-Boot] Denali ddr controlle: how i can reset?   Luigi Mantellini
• [U-Boot] Dent ists Directory in America   referred
• [U-Boot] Dentist.s Directory for the United States   dirac
• [U-Boot] EP93XX Uboot support   Marco Stornelli
• [U-Boot] EP93XX Uboot support   Alessandro Rubini
• [U-Boot] Error in buffer data for NAND flash write, read on OMAP3430SDP.   Radha Krishna
• [U-Boot] ext2ls - size limit   mRon
• [U-Boot] Fat32 and VFAT support   Eric Nelson
• [U-Boot] Fat32 and VFAT support   michael
• [U-Boot] FDT include file problems   Wolfgang Denk
• [U-Boot] FDT include file problems   Jerry Van Baren
• [U-Boot] FDT include file problems   Wolfgang Denk
• [U-Boot] FDT include file problems   Jerry Van Baren
• [U-Boot] FDT include file problems   Wolfgang Denk
• [U-Boot] FDT include file problems   Wolfgang Denk
• [U-Boot] FDT include file problems   Jerry Van Baren
• [U-Boot] FDT include file problems   Wolfgang Denk
• [U-Boot] FIT image documentation   Bernhard Weirich
• [U-Boot] FIT image documentation   Bartlomiej Sieka
• [U-Boot] fsl_elbc_nand.c and nand_boot_fsl_elbc.c for large page devices   Scott Wood
• [U-Boot] fsl_elbc_nand.c and nand_boot_fsl_elbc.c for large page devices   Ron Madrid
• [U-Boot] fsl_elbc_nand.c and nand_boot_fsl_elbc.c for large page devices   Ron Madrid
• [U-Boot] fsl_elbc_nand.c and nand_boot_fsl_elbc.c for large page devices   Wolfgang Denk
• [U-Boot] fsl_elbc_nand.c and nand_boot_fsl_elbc.c for large page devices   Ron Madrid
• [U-Boot] fsl_elbc_nand.c and nand_boot_fsl_elbc.c for large page devices   Scott Wood
• [U-Boot] GPIO configuration on 460EX   Felix Radensky
• [U-Boot] GPIO configuration on 460EX   Stefan Roese
• [U-Boot] GPIO configuration on 460EX   Felix Radensky
• [U-Boot] Hangs at relocation on 460EX Target   Ayman M. El-Khashab
• [U-Boot] Hangs at relocation on 460EX Target   Stefan Roese
• [U-Boot] Hangs at relocation on 460EX Target   Ayman M. El-Khashab
• [U-Boot] Hangs at relocation on 460EX Target   Wolfgang Denk
• [U-Boot] Hangs at relocation on 460EX Target   Ayman M. El-Khashab
• [U-Boot] Hangs at relocation on 460EX Target   Stefan Roese
• [U-Boot] Hangs at relocation on 460EX Target   Ayman M. El-Khashab
• [U-Boot] Hangs at relocation on 460EX Target   Stefan Roese
• [U-Boot] Hangs at relocation on 460EX Target   Felix Radensky
• [U-Boot] Hangs at relocation on 460EX Target   Stefan Roese
• [U-Boot] Hangs at relocation on 460EX Target   Felix Radensky
• [U-Boot] Hangs at relocation on 460EX Target   Stefan Roese
• [U-Boot] Hangs at relocation on 460EX Target   Ayman M. El-Khashab
• [U-Boot] Healthcare Industry Directory   Steele
• [U-Boot] Help building AT91 u-boot with Buildroot tools   Otto Caldwell
• [U-Boot] Help building AT91 u-boot with Buildroot tools   Robert Schwebel
• [U-Boot] Help With TFTP   Quick X
• [U-Boot] how can i change u-boot load address?   sahar mustafa
• [U-Boot] how can i change u-boot load address?   Andrew Dyer
• [U-Boot] how can i change u-boot load address?   Roman Mashak
• [U-Boot] how can i change u-boot load address?   Roman Mashak
• [U-Boot] how can i change u-boot load address?   Wolfgang Denk
• [U-Boot] how can i change u-boot load address?   Hebbar
• [U-Boot] how can i change u-boot load address?   Gururaja Hebbar K R
• [U-Boot] how can i change u-boot load address?   Wolfgang Denk
• [U-Boot] how can i change u-boot load address?   Wolfgang Denk
• [U-Boot] how can i change u-boot load address?   Gururaja Hebbar K R
• [U-Boot] how can i change u-boot load address?   Roman Mashak
• [U-Boot] how can i change u-boot load address?   Wolfgang Denk
• [U-Boot] how can i change u-boot load address?   Roman Mashak
• [U-Boot] How to use time and ctime on OMAP3430.   Radha Krishna
• [U-Boot] i2c bus 1 on ppc440gx   k b
• [U-Boot] i2c_reg_read() on 8xx   Timur Tabi
• [U-Boot] i2c_reg_read() on 8xx   Wolfgang Denk
• [U-Boot] IBAT and DBAT question   Alemao
• [U-Boot] IBAT and DBAT question   Scott Wood
• [U-Boot] Incorrect Chip ID for Micrel Nand Flash on AT91SAM9260 board   Kevin Greer
• [U-Boot] Incorrect Chip ID for Micrel Nand Flash on AT91SAM9260 board   Eric BENARD
• [U-Boot] Initialization   Alemao
• [U-Boot] Initialization   David Hawkins
• [U-Boot] IXP43X and Ethernet NPE   Mirko D.
• [U-Boot] IXP43X and Ethernet NPE   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] JFFS2-Summary support for u-boot   Detlev Zundel
• jffs2: fix sector_size calculation in case of NOR flash   Ilya Yanok
• [U-Boot] Linux does not boot from flash, but will from RAM   Curran, Tom
• [U-Boot] Linux does not boot from flash, but will from RAM   Jerry Van Baren
• [U-Boot] Linux does not boot from flash, but will from RAM   Ricardo
• [U-Boot] List of U-Boot tasks (aka things to do)   Wolfgang Denk
• [U-Boot] Load a kernel image   Ivan Llopard
• [U-Boot] lookup tables: how can i manage them?   Luigi 'Comio' Mantellini
• [U-Boot] make clean problem   Eugene O'Brien
• [U-Boot] make clean problem   Wolfgang Denk
• [U-Boot] make clean problem   Jerry Van Baren
• [U-Boot] make clean problem   Wolfgang Denk
• [U-Boot] make clean problem   Graeme Russ
• [U-Boot] make clean problem   Wolfgang Denk
• [U-Boot] Makefile question   Ron Madrid
• [U-Boot] Missing definition of DIV_ROUND   Gary Jennejohn
• [U-Boot] Missing definition of DIV_ROUND   Wolfgang Denk
• [U-Boot] Missing definition of DIV_ROUND   Gary Jennejohn
• [U-Boot] Missing definition of DIV_ROUND   Gary Jennejohn
• [U-Boot] MPC83xx Patches   Wolfgang Denk
• [U-Boot] MPC83xx Patches   Kim Phillips
• [U-Boot] MPC83xx Patches   Wolfgang Denk
• [U-Boot] MPC83xx Patches   Anton Vorontsov
• [U-Boot] MPC8555CDS broken on TOT (commit 8fd4166c, ELDK 4.2)   Andy Fleming
• [U-Boot] MPC8555CDS broken on TOT (commit 8fd4166c, ELDK 4.2)   Bartlomiej Sieka
• [U-Boot] MPC86xx unapplied patches   Kumar Gala
• [U-Boot] MPC86xx unapplied patches   Wolfgang Denk
• [U-Boot] MPC86xx unapplied patches   Jon Loeliger
• [U-Boot] NAND flash driver for Samsung K9F1G08   Roman Mashak
• [U-Boot] NAND flash driver for Samsung K9F1G08   Roman Mashak
• [U-Boot] NAND flash driver for Samsung K9F1G08   Stefan Roese
• [U-Boot] NAND flash driver for Samsung K9F1G08   Roman Mashak
• [U-Boot] NAND flash driver for Samsung K9F1G08   Wolfgang Denk
• [U-Boot] NAND flash driver for Samsung K9F1G08   Roman Mashak
• [U-Boot] NAND flash driver for Samsung K9F1G08   Scott Wood
• [U-Boot] NAND flash driver for Samsung K9F1G08   Roman Mashak
• [U-Boot] NAND legacy flash removal   Scott Wood
• [U-Boot] net: Move initialization of Au1x00 SoC ethernet MAC to cpu_eth_init   Shinya Kuribayashi
• [U-Boot] net: Move initialization of Au1x00 SoC ethernet MAC to cpu_eth_init   Ben Warren
• [U-Boot] net: Move initialization of Au1x00 SoC ethernet MAC to cpu_eth_init   Shinya Kuribayashi
• [U-Boot] NET: Updated SMSC LAN9x1x EEPROM program?   Mike Frysinger
• [U-Boot] non-needed objects added to resulting U-Boot image   Roman Mashak
• [U-Boot] non-needed objects added to resulting U-Boot image   Wolfgang Denk
• [U-Boot] non-needed objects added to resulting U-Boot image   Roman Mashak
• [U-Boot] non-needed objects added to resulting U-Boot image   Wolfgang Denk
• [U-Boot] onenand and nand together   Alessandro Rubini
• [U-Boot] onenand and nand together   Scott Wood
• [U-Boot] PATCH: IXP465 support and some IXP4xx rework, Sidewinder board support   h.sattler at erhardt-leimer.com
• [U-Boot] PATCH: IXP465 support and some IXP4xx rework, Sidewinder board support   Wolfgang Denk
• [U-Boot] PATCH: IXP465 support and some IXP4xx rework, Sidewinder board support   michael
• [U-Boot] PATCH: IXP465 support and some IXP4xx rework, Sidewinder board support   h.sattler at erhardt-leimer.com
• [U-Boot] PATCH: IXP465 support and some IXP4xx rework, Sidewinder board support   h.sattler at erhardt-leimer.com
• [U-Boot] PATCH: U-Boot support for Olimex SAM9L-9260 development board   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] PATCH: U-Boot support for Olimex SAM9L-9260 development board   Wolfgang Denk
• [U-Boot] Please pull mpc83xx upm fix for 2008.10 release (was Re: MPC83xx Patches)   Kim Phillips
• [U-Boot] Please pull u-boot-mpc83xx   Kim Phillips
• [U-Boot] Please pull u-boot-mpc83xx   Wolfgang Denk
• [U-Boot] Please pull u-boot-mpc83xx fixes for 2008-10 release   Wolfgang Denk
• [U-Boot] Please pull u-boot-mpc83xx.git   Kim Phillips
• [U-Boot] Please pull u-boot-mpc83xx.git   Wolfgang Denk
• [U-Boot] Please pull u-boot-mpc85xx.git   Andy Fleming
• [U-Boot] Please pull u-boot-mpc85xx.git   Andy Fleming
• [U-Boot] Please pull u-boot-mpc85xx.git   Wolfgang Denk
• [U-Boot] Please pull u-boot-mpc85xx.git   Wolfgang Denk
• [U-Boot] Please pull u-boot-mpc85xx.git   Andy Fleming
• [U-Boot] Please pull u-boot-mpc85xx.git   Wolfgang Denk
• [U-Boot] Please pull u-boot-mpc85xx.git   Kumar Gala
• [U-Boot] Please pull u-boot-mpc85xx.git   Andy Fleming
• [U-Boot] Please pull u-boot-mpc85xx.git   Wolfgang Denk
• [U-Boot] Please pull u-boot-mpc85xx.git   Wolfgang Denk
• [U-Boot] Please pull u-boot-mpc85xx.git   Kumar Gala
• [U-Boot] Please pull u-boot-mpc85xx.git   Wolfgang Denk
• [U-Boot] Please pull u-boot-mpc85xx.git   Wolfgang Denk
• [U-Boot] Please pull u-boot-mpc85xx.git   Andy Fleming
• [U-Boot] Please pull u-boot-mpc85xx.git   Wolfgang Denk
• [U-Boot] Please pull u-boot-mpc85xx.git   Andy Fleming
• [U-Boot] Please pull u-boot-mpc85xx.git   Wolfgang Denk
• [U-Boot] Problem with flash on a MPC5200B board   Sylvain Lamontagne
• [U-Boot] Problem with flash on a MPC5200B board   Sylvain Lamontagne
• [U-Boot] Problem with flash on a MPC5200B board   Sylvain Lamontagne
• [U-Boot] Problem with flash on a MPC5200B board   Jerry Van Baren
• [U-Boot] Problem with flash on a MPC5200B board   Andre Schwarz
• [U-Boot] Problems erasing (and writing) to flash   ffileppo at alice.it
• [U-Boot] Problems erasing (and writing) to flash   Wolfgang Denk
• [U-Boot] Problems with PCI-E Switch on 460EX   Ayman M. El-Khashab
• [U-Boot] Pull request - net   Ben Warren
• [U-Boot] Pull request - net   Wolfgang Denk
• [U-Boot] Pull request u-boot-blackfin.git   Mike Frysinger
• [U-Boot] Pull request u-boot-blackfin.git   Mike Frysinger
• [U-Boot] Pull request: nand flash   Scott Wood
• [U-Boot] Pull request: nand flash   Wolfgang Denk
• [U-Boot] Pull request: nand flash   Scott Wood
• [U-Boot] Pull request: nand flash   Scott Wood
• [U-Boot] Pull request: nand-flash   Scott Wood
• [U-Boot] Pull request: nand-flash   Wolfgang Denk
• [U-Boot] Pull request: u-boot-fdt   Jerry Van Baren
• [U-Boot] Pull request: u-boot-fdt   Wolfgang Denk
• [U-Boot] Pull request: u-boot-fdt   Jerry Van Baren
• [U-Boot] Pull request: u-boot-mpc86xx   Jon Loeliger
• [U-Boot] Pull request: u-boot-mpc86xx   Wolfgang Denk
• [U-Boot] Pull request: u-boot-sh   Nobuhiro Iwamatsu
• [U-Boot] Pull request: u-boot-sh   Wolfgang Denk
• [U-Boot] Pull request: u-boot-sh   Nobuhiro Iwamatsu
• [U-Boot] Pull request: u-boot-video   Anatolij Gustschin
• [U-Boot] Pull request: u-boot-video   Wolfgang Denk
• [U-Boot] question: U-boot linking against libgcc   Remy Bohmer
• [U-Boot] question: U-boot linking against libgcc   Wolfgang Denk
• [U-Boot] question: U-boot linking against libgcc   Remy Bohmer
• [U-Boot] Read kernel image with nios2   ivanchuklist ivanchu
• [U-Boot] Read kernel image with nios2   Jerry Van Baren
• [U-Boot] resetting environment to default   Kumar Gala
• [U-Boot] resetting environment to default   Wolfgang Denk
• [U-Boot] resetting environment to default   Kumar Gala
• [U-Boot] resetting environment to default   Wolfgang Denk
• [U-Boot] RFC - How to speed up multiplexed input between serial and network?   Wolfgang Denk
• [U-Boot] RFC - How to speed up multiplexed input between serial and network?   Bigler, Stefan
• [U-Boot] RFC - How to speed up multiplexed input between serial and network?   Wolfgang Denk
• [U-Boot] RFC - How to speed up multiplexed input between serial and network?   Bigler, Stefan
• [U-Boot] RFC - How to speed up multiplexed input between serial andnetwork?   Bigler, Stefan
• [U-Boot] RFC - How to speed up multiplexed input between serial andnetwork?   Wolfgang Denk
• [U-Boot] RFC - How to speed up multiplexed input between serial and network?   Bigler, Stefan
• [U-Boot] Run hello world with Uboot !   thaoth
• [U-Boot] Run hello world with Uboot !   Andrejs Cainikovs
• [U-Boot] Run hello world with Uboot !   Mathieu Dube
• [U-Boot] Run hello world with Uboot !   Wolfgang Denk
• [U-Boot] Run hello world with Uboot !   Wolfgang Denk
• [U-Boot] Run hello world with Uboot !   thaoth
• [U-Boot] Run hello world with Uboot !   Remy Bohmer
• [U-Boot] Run hello world with Uboot !   Mathieu Dube
• [U-Boot] Run hello world with Uboot !   Mathieu Dube
• [U-Boot] Run hello world with Uboot !   Wolfgang Denk
• [U-Boot] Run hello world with Uboot !   Nobuhiro Iwamatsu
• [U-Boot] Run hello world with Uboot !   thaoth
• [U-Boot] RV: Problem with flash on a MPC5200B board   txema lopez
• [U-Boot] s/3/2/ [PATCH 2/3]/ Fix an overflow case in fdt_offset_ptr() detected by GCC 4.3.   Jerry Van Baren
• [U-Boot] saveenv problems   Georg Schardt
• [U-Boot] saveenv problems   Wolfgang Denk
• [U-Boot] saveenv problems   Georg Schardt
• [U-Boot] SDRAM controller initialization code   Muzammil Ahmed
• [U-Boot] SDRAM controller initialization code   Stefan Roese
• [U-Boot] sequoia_config build failure?   Kumar Gala
• [U-Boot] sequoia_config build failure?   Stefan Roese
• [U-Boot] sequoia_config build failure?   Kumar Gala
• [U-Boot] sequoia_config build failure?   Wolfgang Denk
• [U-Boot] SPAM:General Dentists Contact List for the USA   factious
• [U-Boot] Special memory test Question   Martin Jarman
• [U-Boot] Special memory test Question   Wolfgang Denk
• [U-Boot] Special memory test Question   Wolfgang Denk
• [U-Boot] Special memory test Question   Haavard Skinnemoen
• [U-Boot] Special memory test Question   Haavard Skinnemoen
• [U-Boot] Special memory test Question   Wolfgang Denk
• [U-Boot] Special memory test Question   Martin Jarman
• [U-Boot] Splash Screen   Schmid Alexander
• [U-Boot] Splash Screen   Wolfgang Denk
• [U-Boot] Splash Screen   Schmid Alexander
• [U-Boot] Splash Screen   Anatolij Gustschin
• [U-Boot] Splash Screen   Schmid Alexander
• [U-Boot] Splash Screen   Wolfgang Denk
• [U-Boot] Standalone application after powerup   Nagesh.ML
• [U-Boot] Standalone application after powerup   Wolfgang Denk
• [U-Boot] Standalone Application Images support (bootm)   Rodrigo Vilar
• [U-Boot] Standalone Application Images support (bootm)   Wolfgang Denk
• [U-Boot] Starting WindowsCE   A. Geisreiter
• [U-Boot] Starting WindowsCE   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] Starting WindowsCE   Ken.Fuchs at bench.com
• [U-Boot] TI DM6446 EVM logo   gather bzbz
• [U-Boot] U-Boot 1.3.1 booting problem   pugazh mahalingam
• [U-Boot] U-Boot 1.3.1 booting problem   Kumar Gala
• [U-Boot] U-Boot 1.3.1 booting problem   Jerry Van Baren
• [U-Boot] U-Boot 1.3.1 booting problem   Martin Hejnfelt
• [U-Boot] U-Boot 1.3.1 booting problem   Jerry Van Baren
• [U-Boot] U-Boot 1.3.3 - Error: start address not on sector boundary   jkimble at one.net
• [U-Boot] U-boot 1.3.3: Error: start address not on sector boundary   Liew Tsi Chung
• [U-Boot] U-boot 1.3.3: Error: start address not on sector boundary   jkimble at one.net
• [U-Boot] U-Boot 2008.10 Release   Wolfgang Denk
• [U-Boot] U-BOOT and Marvell Feroceon 88f5181   Prafulla Wadaskar
• [U-Boot] u-boot randomly lost params.   gather bzbz
• [U-Boot] u-boot randomly lost params.   Wolfgang Denk
• [U-Boot] U-Boot Relocation (all sections, not just .text)   Graeme Russ
• [U-Boot] U-Boot Relocation (all sections, not just .text)   Haavard Skinnemoen
• [U-Boot] U-Boot Relocation (all sections, not just .text)   Andrew Dyer
• [U-Boot] U-boot Saveenv question   Suresh Bhaskaran
• [U-Boot] U-boot Saveenv question   Andrejs Cainikovs
• [U-Boot] U-boot Saveenv question   Suresh Bhaskaran
• [U-Boot] U-boot Saveenv question   Jerry Van Baren
• [U-Boot] U-boot Saveenv question   Suresh Bhaskaran
• [U-Boot] U-boot Saveenv question --> final tested solution   Suresh Bhaskaran
• [U-Boot] U-boot Saveenv question --> final tested solution   Jerry Van Baren
• [U-Boot] U-boot support for Non Console board   rajeev s
• [U-Boot] U-boot support for Non Console board   Wolfgang Denk
• [U-Boot] U-boot support for Non Console board   Jerry Van Baren
• [U-Boot] U-boot support for Non Console board   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] U-boot support for Non Console board   Ira Snyder
• [U-Boot] Unable to run Standalone applications on NGW100   Martin Mroz
• [U-Boot] Unable to run Standalone applications on NGW100   Jerry Van Baren
• [U-Boot] We have data for Pharmaceutical Companies, Pharmaceutical Companies, Chiropractors etc..   Melinda Foreman
• [U-Boot] working with loadb & bootm on u-boot-v2 for imx27ads Board   Lejin K Joy
• [U-Boot] xilinx_emaclite buffer overrun   Clive Stubbings
• [U-Boot] xilinx_emaclite buffer overrun   Michal Simek
• [U-Boot] xilinx_emaclite buffer overrun   Clive Stubbings
• [U-Boot] xilinx_emaclite buffer overrun   Michal Simek
• [U-Boot] XUPV2P : U-boot doesn't detect the systemace, compact flash   Juan Pablo Gómez
• [U-Boot] |>entists Directory in the US   Kathrine brandy

Last message date: Fri Oct 31 23:40:44 CET 2008
Archived on: Tue Nov 4 17:20:45 CET 2008

• Messages sorted by: [ thread ] [ author ] [ date ]
• More info on this list...