[U-Boot] [PATCH] serial: add support for the OMRPv2 simple wishbone UART

[Florian Fainelli]

Hi Wolfgang,

Le Tuesday 14 October 2008 15:08:14 Wolfgang Denk, vous avez écrit :
> It seems ther eis no board in the mainline U-Boot code which uses this
> driver.
>
> Do you plan to submit any board support that will actually use this
> driver?

Of course. I actually wanted to know about the good programming pratice before 
submitting it. 

> Accesses to device registers through  volatile  pointers  are  depre-
> cated. Please use the respective accessor macros / functions instead.

Ok, I could probably fixup the uartlite driver with another patch to use the 
proper accessors. I derived this driver from it.

> That's to set the baud rate. This function seems to be missing in your
> driver?

Baudrate is hardcoded in the IP core because it is very simple and occupyiong 
only a few LUTs. I do not think I will have to change the baudrate ever.

> Please write like this:
>
> 	while(IO_SERIAL_UCR & WUB_BUSY)
> 		;

Ok.

>
> > +void serial_puts(const char * s)
> > +{
> > +	while (*s) {
> > +		serial_putc(*s++);
> > +	}
>
> No curly braces for a single line statement, please.
>
> > +	while(!(IO_SERIAL_UCR & WUB_DR));
>
> See above.
>
> This makes no sense to me - a  header  file  which  contains  just  a
> single line include for another header file?

I was following the uartlite/microblaze pratice, but that's right it does not 
make sense at all.

Thank you very much for your comments, when board support is ready I will 
resubmit everything in separate patches.
-- 
Cordialement, Florian Fainelli

OpenPattern SARL - Lead software architect
GSM: +33.632843955
109/111 rue des Côtes
78 600 Maisons-Laffitte
------------------------------
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 197 bytes
Desc: This is a digitally signed message part.
Url : http://lists.denx.de/pipermail/u-boot/attachments/20081014/233e4aee/attachment.pgp