[U-Boot] Antwort: Re: PATCH: IXP465 support and some IXP4xx rework, Sidewinder board support

[michael]

Hi,

h.sattler at erhardt-leimer.com wrote:
> michael <trimarchi at gandalf.sssup.it> schrieb am 07.10.2008 12:14:48:
>
>   
>> Hi,
>>
>> h.sattler at erhardt-leimer.com wrote:
>>     
>>> Hi,
>>>
>>> on the matter of getting u-boot work with the ADI Sidewinder Reference 
>>>       
>
>   
>>> Platform, I found the previously posted patches and used them as 
>>>       
> starting 
>   
>>> point for my own patch set.
>>> The Sidewinder board works with this patch, including ECC (optional).
>>>
>>> There is a minimum set of ifdefs in cpu/ixp/start.S and no 
>>>       
> board-specific 
>   
>>> low-level.S and thus no endless code-duplication. The
>>> SDRAM parameters are handled by configuration definitions.
>>> The ixp425.h and ixp465.h header files should be merged but that can 
>>> follow in a different patch, possibly renaming the defines and fixing 
>>>       
> all 
>   
>>> board specific code.
>>>
>>>       
>> I think that you use my patchset. It is true?
>>     
>
> Almost. I used it as base but modified it quite a bit. There is almost no 
> difference between IXP465 and IXP425 anymore (except header files), no 
> lowlevel-init.S anymore and correct CPU info display.
>   
Ok, It was Walfgang ask to my version, but I don't have spare time to 
work on
it.
> BTW: ixdp425_config, ixdpg425_config and pdnb3_config are broken if 
> IxNpeMicrocode.o is not present
>
> HS
>
>
>   
Regards Michael