[U-Boot] [PATCH v3 3/6] i.MX31: Add basic support for Freescale's i.MX31 PDK board.

[Jean-Christophe PLAGNIOL-VILLARD]

On 00:27 Mon 13 Oct     , Wolfgang Denk wrote:
> Dear Jean-Christophe,
> 
> In message <20080903210403.GD1249 at game.jcrosoft.org> you wrote:
> > On 10:36 Fri 29 Aug     , Magnus Lilja wrote:
> > > Add support for the Freescale i.MX31 PDK (a.k.a 3DS) board. Ethernet and
> > > MC13873 RTC support is enabled by this patch.
> > > 
> > > Booting from NAND is not supported yet so U-boot relies on some other
> > > initial boot loader to set up SDRAM and clocks and copying U-boot to SDRAM.
> > > 
> > > Signed-off-by: Magnus Lilja <lilja.magnus at gmail.com>
> > > ---
> > >  MAKEALL                                 |    1 +
> > >  Makefile                                |    3 +
> > >  board/freescale/mx31pdk/Makefile        |   53 ++++++++++
> > >  board/freescale/mx31pdk/config.mk       |    1 +
> > >  board/freescale/mx31pdk/lowlevel_init.S |   30 ++++++
> > >  board/freescale/mx31pdk/mx31pdk.c       |   76 +++++++++++++++
> > >  board/freescale/mx31pdk/u-boot.lds      |   59 ++++++++++++
> > >  include/configs/mx31pdk.h               |  159 +++++++++++++++++++++++++++++++
> > >  8 files changed, 382 insertions(+), 0 deletions(-)
> > > 
> > applied to u-boot-arm branch testing
> 
> This patch (and all the others of this patch series) was sumbitted
> while the merge window was open.
> 
> Is there any special reason it was not added to the master branch
> yet?

> 
As we discuss on IRC this board will be merge when it can boot from a storage

Best Regards,
J.