[U-Boot] [PATCH 1/1 v2] ppc4xx: Reset and relock memory DLL after SDRAM_CLKTR change

[Victor Gallardo]

OK. Thanks Stefan.
 
> > We will take a look.
> 
> Thanks.
> 
> > Yes, we ran the test as you mentioned (bootcmd=reset) on both versions of
> > the Kilauea board and let it run for 24 hours without any problems.
> > Hopefully we can reproduce the problem you are seeing.
> 
> I suggest that you use some means to cool down the board and heat it up a
> little bit, to see if it fails in some temperature ranges.
> 
> It happend here with a "cold" board. I powered it on again:
...
>
> I suggest that you use the same object I used. Please find it attached.