[U-Boot] [PATCH 4/4] ppc4xx: Fix USB 2.0 phy reset sequence

[Matthias Fuchs]

Hi Stefan,

this might touch other boards as well. A patch for our PMC440 will come up 
later today. 

I have a support case with AMCC about this and ask them If I shall provide a 
patch for sequoia as well. I expect that someone will contact you about this
issue.

Matthias

On Wednesday 08 October 2008 11:51, Stefan Roese wrote:
> Hi Matthias,
> 
> On Tuesday 07 October 2008, matthias.fuchs at esd-electronics.com wrote:
> > From: Matthias Fuchs <matthias.fuchs at esd-electronics.com>
> >
> > This patch fixes USB 2.0 communication issues on some DU440 boards.
> 
> Is this a potential problem for other 440EPx boards as well? Or is it really 
> only DU440 specific?
> 
> Best regards,
> Stefan
> 
> =====================================================================
> DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
> Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
> =====================================================================
> 
>